firmware/export/config-h300.h

   1 #define TARGET_TREE /* this target is using the target tree system */
   2 /*
   3  * This config file is for iriver H320, H340
   4  */
   5 #define IRIVER_H300_SERIES 1
   6
   7 #define MODEL_NAME "iriver H300 series"
   8
   9 /* For Rolo and boot loader */
  10 #define MODEL_NUMBER 2
  11
  12 /* define this if you use an ATA controller */
  13 #define CONFIG_STORAGE STORAGE_ATA
  14
  15 /* define this if you have a bitmap LCD display */
  16 #define HAVE_LCD_BITMAP
  17
  18 /* define this if you have a colour LCD */
  19 #define HAVE_LCD_COLOR
  20
  21 /* define this if you want album art for this target */
  22 #define HAVE_ALBUMART
  23
  24 /* define this if you can flip your LCD */
  25 #define HAVE_LCD_FLIP
  26
  27 /* define this if you have access to the quickscreen */
  28 #define HAVE_QUICKSCREEN
  29 /* define this if you have access to the pitchscreen */
  30 #define HAVE_PITCHSCREEN
  31
  32 /* define this if you would like tagcache to build on this target */
  33 #define HAVE_TAGCACHE
  34
  35 /* LCD dimensions */
  36 #define LCD_WIDTH  220
  37 #define LCD_HEIGHT 176
  38 #define LCD_DEPTH  16   /* 65k colours */
  39 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  40
  41 /* remote LCD */
  42 #define LCD_REMOTE_WIDTH  128
  43 #define LCD_REMOTE_HEIGHT 64
  44 #define LCD_REMOTE_DEPTH  1
  45
  46 #define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
  47
  48 /* Remote display colours, for screenshots and sim (0xRRGGBB) */
  49 #define LCD_REMOTE_DARKCOLOR       0x000000
  50 #define LCD_REMOTE_BRIGHTCOLOR     0x5a915a
  51 #define LCD_REMOTE_BL_DARKCOLOR    0x000000
  52 #define LCD_REMOTE_BL_BRIGHTCOLOR  0x82b4fa
  53
  54 #define CONFIG_KEYPAD IRIVER_H300_PAD
  55
  56 #define CONFIG_REMOTE_KEYPAD H300_REMOTE
  57
  58 /* Define this if you do software codec */
  59 #define CONFIG_CODEC SWCODEC
  60
  61 /* define this if you have a real-time clock */
  62 #define CONFIG_RTC RTC_PCF50606
  63
  64 /* define this if you have a disk storage, i.e. something
  65    that needs spinups and can cause skips when shaked */
  66 #define HAVE_DISK_STORAGE
  67
  68 /* Define this if you have an remote lcd */
  69 #define HAVE_REMOTE_LCD
  70
  71 /* Define if we have a hardware defect that causes ticking on the audio line */
  72 #define HAVE_REMOTE_LCD_TICKING
  73
  74 /* Define this for LCD backlight available */
  75 #define HAVE_BACKLIGHT
  76 #define HAVE_BACKLIGHT_BRIGHTNESS
  77 /* Which backlight fading type? */
  78 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
  79 /* Define this if your LCD can be enabled/disabled */
  80 #define HAVE_LCD_ENABLE
  81
  82 /* Define this if you have a software controlled poweroff */
  83 #define HAVE_SW_POWEROFF
  84
  85 /* The number of bytes reserved for loadable codecs */
  86 #define CODEC_SIZE 0x100000
  87
  88 /* The number of bytes reserved for loadable plugins */
  89 #define PLUGIN_BUFFER_SIZE 0x80000
  90
  91 #define AB_REPEAT_ENABLE 1
  92
  93 #define CONFIG_TUNER TEA5767
  94 #define CONFIG_TUNER_XTAL 32768
  95
  96 #define HAVE_UDA1380
  97
  98 /* define this if you have recording possibility */
  99 #define HAVE_RECORDING
 100
 101 /* Define bitmask of input sources - recordable bitmask can be defined
 102    explicitly if different */
 103 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
 104
 105 /* define hardware samples rate caps mask */
 106 #define HW_SAMPR_CAPS   (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
 107
 108 /* define the bitmask of recording sample rates */
 109 #define REC_SAMPR_CAPS  (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
 110
 111 #define HAVE_AGC
 112
 113 #define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
 114 #define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
 115 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
 116 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 117 #define BATTERY_TYPES_COUNT  1    /* only one type */
 118
 119 /* Hardware controlled charging with monitoring */
 120 #define CONFIG_CHARGING CHARGING_MONITOR
 121
 122 /* define this if the unit can be powered or charged via USB */
 123 #define HAVE_USB_POWER
 124
 125 /* define current usage levels */
 126 #define CURRENT_NORMAL     80  /* 16h playback on 1300mAh battery from IriverRuntime wiki page */
 127 #define CURRENT_BACKLIGHT  23  /* FIXME: This needs to be measured, copied from H100 */
 128 #define CURRENT_RECORD    110  /* additional current while recording */
 129 #define CURRENT_MAX_CHG   650  /* maximum charging current */
 130 #define CURRENT_REMOTE      8  /* additional current when remote connected */
 131
 132 /* define this if the unit can have USB charging disabled by user -
 133  * if USB/MAIN power is discernable and hardware doesn't compel charging */
 134 #define HAVE_USB_CHARGING_ENABLE
 135
 136 #ifndef SIMULATOR
 137
 138 /* Define this if you have a Motorola SCF5249 */
 139 #define CONFIG_CPU MCF5249
 140
 141 /* Define this if you want to use coldfire's i2c interface */
 142 #define CONFIG_I2C I2C_COLDFIRE
 143
 144 /* The size of the flash ROM */
 145 #define FLASH_SIZE 0x400000
 146
 147 /* Define this to the CPU frequency */
 148 #define CPU_FREQ      11289600
 149
 150 /* Define this if you have ATA power-off control */
 151 #define HAVE_ATA_POWER_OFF
 152
 153 /* Virtual LED (icon) */
 154 #define CONFIG_LED LED_VIRTUAL
 155
 156 #define CONFIG_LCD LCD_H300
 157
 158 /* Offset ( in the firmware file's header ) to the file CRC */
 159 #define FIRMWARE_OFFSET_FILE_CRC 0
 160
 161 /* Offset ( in the firmware file's header ) to the real data */
 162 #define FIRMWARE_OFFSET_FILE_DATA 8
 163
 164 /* USB On-the-go */
 165 #define CONFIG_USBOTG USBOTG_ISP1362
 166
 167 /* Define this if you have adjustable CPU frequency */
 168 #define HAVE_ADJUSTABLE_CPU_FREQ
 169
 170 #define BOOTFILE_EXT "iriver"
 171 #define BOOTFILE "rockbox." BOOTFILE_EXT
 172 #define BOOTDIR "/.rockbox"
 173
 174 #define BOOTLOADER_ENTRYPOINT  0x001F0000
 175 #define FLASH_ENTRYPOINT       0x00001000
 176 #define FLASH_MAGIC            0xfbfbfbf1
 177
 178 /* Define this if there is an EEPROM chip */
 179 #define HAVE_EEPROM
 180
 181 #endif /* SIMULATOR */
 182
 183 /* Define this for FM radio input available */
 184 #define HAVE_FMRADIO_IN
 185
 186 /** Port-specific settings **/
 187
 188 /* Main LCD contrast range and defaults */
 189 #define MIN_CONTRAST_SETTING        5
 190 #define MAX_CONTRAST_SETTING        63
 191 #define DEFAULT_CONTRAST_SETTING    40
 192
 193 /* Main LCD backlight brightness range and defaults */
 194 /* accepts 0..15 but note that 0 and 1 give a black display on H300! */
 195 #define MIN_BRIGHTNESS_SETTING      2  /*  2/16 (12.50%) */
 196 #define MAX_BRIGHTNESS_SETTING      15 /* 15/16 (93.75%) */
 197 #define DEFAULT_BRIGHTNESS_SETTING  9  /*  9/16 (56.25%) */
 198
 199 /* Remote LCD contrast range and defaults */
 200 #define MIN_REMOTE_CONTRAST_SETTING     5
 201 #define MAX_REMOTE_CONTRAST_SETTING     63
 202 #define DEFAULT_REMOTE_CONTRAST_SETTING 42