FS#8961 - Anti-Aliased Fonts.
[kugel-rb.git] / firmware / export / config-h300.h
blob91f54f54799b1865f8c6a7895ec00abe1714d184
1 #define TARGET_TREE /* this target is using the target tree system */
2 /*
3 * This config file is for iriver H320, H340
4 */
5 #define IRIVER_H300_SERIES 1
7 #define MODEL_NAME "iriver H300 series"
9 /* For Rolo and boot loader */
10 #define MODEL_NUMBER 2
12 /* define this if you use an ATA controller */
13 #define CONFIG_STORAGE STORAGE_ATA
15 /* define this if you have a bitmap LCD display */
16 #define HAVE_LCD_BITMAP
18 /* define this if you have a colour LCD */
19 #define HAVE_LCD_COLOR
21 /* define this if you want album art for this target */
22 #define HAVE_ALBUMART
24 /* define this to enable bitmap scaling */
25 #define HAVE_BMP_SCALING
27 /* define this to enable JPEG decoding */
28 #define HAVE_JPEG
30 /* define this if you can flip your LCD */
31 #define HAVE_LCD_FLIP
33 /* define this if you have access to the quickscreen */
34 #define HAVE_QUICKSCREEN
35 /* define this if you have access to the pitchscreen */
36 #define HAVE_PITCHSCREEN
38 /* define this if you would like tagcache to build on this target */
39 #define HAVE_TAGCACHE
41 /* LCD dimensions */
42 #define LCD_WIDTH 220
43 #define LCD_HEIGHT 176
44 #define LCD_DEPTH 16 /* 65k colours */
45 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
47 /* remote LCD */
48 #define LCD_REMOTE_WIDTH 128
49 #define LCD_REMOTE_HEIGHT 64
50 #define LCD_REMOTE_DEPTH 1
52 #define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
54 /* Remote display colours, for screenshots and sim (0xRRGGBB) */
55 #define LCD_REMOTE_DARKCOLOR 0x000000
56 #define LCD_REMOTE_BRIGHTCOLOR 0x5a915a
57 #define LCD_REMOTE_BL_DARKCOLOR 0x000000
58 #define LCD_REMOTE_BL_BRIGHTCOLOR 0x82b4fa
60 #define CONFIG_KEYPAD IRIVER_H300_PAD
62 #define CONFIG_REMOTE_KEYPAD H300_REMOTE
64 /* Define this if you do software codec */
65 #define CONFIG_CODEC SWCODEC
67 /* define this if you have a real-time clock */
68 #define CONFIG_RTC RTC_PCF50606
70 /* define this if you have a disk storage, i.e. something
71 that needs spinups and can cause skips when shaked */
72 #define HAVE_DISK_STORAGE
74 /* Define this if you have an remote lcd */
75 #define HAVE_REMOTE_LCD
77 /* Define if we have a hardware defect that causes ticking on the audio line */
78 #define HAVE_REMOTE_LCD_TICKING
80 /* Define this for LCD backlight available */
81 #define HAVE_BACKLIGHT
82 #define HAVE_BACKLIGHT_BRIGHTNESS
83 /* Which backlight fading type? */
84 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
85 /* Define this if your LCD can be enabled/disabled */
86 #define HAVE_LCD_ENABLE
88 /* Define this if you have a software controlled poweroff */
89 #define HAVE_SW_POWEROFF
91 /* The number of bytes reserved for loadable codecs */
92 #define CODEC_SIZE 0x100000
94 /* The number of bytes reserved for loadable plugins */
95 #define PLUGIN_BUFFER_SIZE 0x80000
97 #define AB_REPEAT_ENABLE 1
99 #define CONFIG_TUNER TEA5767
100 #define CONFIG_TUNER_XTAL 32768
102 #define HAVE_UDA1380
104 /* define this if you have recording possibility */
105 #define HAVE_RECORDING
107 /* Define bitmask of input sources - recordable bitmask can be defined
108 explicitly if different */
109 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
111 /* define hardware samples rate caps mask */
112 #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
114 /* define the bitmask of recording sample rates */
115 #define REC_SAMPR_CAPS (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
117 #define HAVE_AGC
119 #define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
120 #define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
121 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
122 #define BATTERY_CAPACITY_INC 50 /* capacity increment */
123 #define BATTERY_TYPES_COUNT 1 /* only one type */
125 /* Hardware controlled charging with monitoring */
126 #define CONFIG_CHARGING CHARGING_MONITOR
128 /* define this if the unit can be powered or charged via USB */
129 #define HAVE_USB_POWER
131 /* define current usage levels */
132 #define CURRENT_NORMAL 80 /* 16h playback on 1300mAh battery from IriverRuntime wiki page */
133 #define CURRENT_BACKLIGHT 23 /* FIXME: This needs to be measured, copied from H100 */
134 #define CURRENT_RECORD 110 /* additional current while recording */
135 #define CURRENT_MAX_CHG 650 /* maximum charging current */
136 #define CURRENT_REMOTE 8 /* additional current when remote connected */
138 /* define this if the unit can have USB charging disabled by user -
139 * if USB/MAIN power is discernable and hardware doesn't compel charging */
140 #define HAVE_USB_CHARGING_ENABLE
142 #ifndef SIMULATOR
144 /* Define this if you have a Motorola SCF5249 */
145 #define CONFIG_CPU MCF5249
147 /* Define this if you want to use coldfire's i2c interface */
148 #define CONFIG_I2C I2C_COLDFIRE
150 /* The size of the flash ROM */
151 #define FLASH_SIZE 0x400000
153 /* Define this to the CPU frequency */
154 #define CPU_FREQ 11289600
156 /* Define this if you have ATA power-off control */
157 #define HAVE_ATA_POWER_OFF
159 /* Virtual LED (icon) */
160 #define CONFIG_LED LED_VIRTUAL
162 #define CONFIG_LCD LCD_H300
164 /* Offset ( in the firmware file's header ) to the file CRC */
165 #define FIRMWARE_OFFSET_FILE_CRC 0
167 /* Offset ( in the firmware file's header ) to the real data */
168 #define FIRMWARE_OFFSET_FILE_DATA 8
170 /* USB On-the-go */
171 #define CONFIG_USBOTG USBOTG_ISP1362
173 /* Define this if you have adjustable CPU frequency */
174 #define HAVE_ADJUSTABLE_CPU_FREQ
176 #define BOOTFILE_EXT "iriver"
177 #define BOOTFILE "rockbox." BOOTFILE_EXT
178 #define BOOTDIR "/.rockbox"
180 #define BOOTLOADER_ENTRYPOINT 0x001F0000
181 #define FLASH_ENTRYPOINT 0x00001000
182 #define FLASH_MAGIC 0xfbfbfbf1
184 /* Define this if there is an EEPROM chip */
185 #define HAVE_EEPROM
187 #endif /* SIMULATOR */
189 /* Define this for FM radio input available */
190 #define HAVE_FMRADIO_IN
192 /** Port-specific settings **/
194 /* Main LCD contrast range and defaults */
195 #define MIN_CONTRAST_SETTING 5
196 #define MAX_CONTRAST_SETTING 63
197 #define DEFAULT_CONTRAST_SETTING 40
199 /* Main LCD backlight brightness range and defaults */
200 /* accepts 0..15 but note that 0 and 1 give a black display on H300! */
201 #define MIN_BRIGHTNESS_SETTING 2 /* 2/16 (12.50%) */
202 #define MAX_BRIGHTNESS_SETTING 15 /* 15/16 (93.75%) */
203 #define DEFAULT_BRIGHTNESS_SETTING 9 /* 9/16 (56.25%) */
205 /* Remote LCD contrast range and defaults */
206 #define MIN_REMOTE_CONTRAST_SETTING 5
207 #define MAX_REMOTE_CONTRAST_SETTING 63
208 #define DEFAULT_REMOTE_CONTRAST_SETTING 42