1 Starting with 1.47, changes marked with SYSLINUX/PXELINUX/ISOLINUX
2 apply to that specific program only; other changes apply to all of
6 * PXELINUX: Support enhanced capabilities when running on top
7 of gPXE (http://www.etherboot.org/). In particular, support
8 URL-style syntax for filenames, and any protocol that gPXE
9 supports (except, currently, iSCSI and AoE.) This feature
10 is currently highly experimental.
11 * Substantial infrastructure changes to support files whose
12 length aren't known at open time (typically network
13 connections.) Please note that the semantics of some of the
14 comboot APIs have changed slightly; please see doc/comboot.doc.
15 * PXELINUX: We no longer require a TFTP server which supports
16 the tsize option for all transfers.
17 * PXELINUX: Integrate with the gPXE source base; unified image
18 now included as "gpxelinux.0".
19 * The source tree has been restructured; files that were
20 previously in the root have moved into the core, dos, gpxe,
21 and utils directories.
22 * "make install", "make netinstall", and "make extbootinstall"
23 have been updated massively. "make install-all" now installs
25 * Change default dir for auxiliary files from
26 /usr/lib/syslinux to /usr/share/syslinux.
27 * SYSLINUX: VFAT long filename support.
28 * MEMDISK: Any image less than 4096K (4 MB) is treated as a
29 floppy disk. The geometry-guessing code will recognize all
30 common extended formats, but
33 * SYSLINUX/EXTLINUX: support "localboot" with the same feature
35 * Add an experimental MBR for GPT partition tables.
36 * Use $(CC) when determining compile flags.
37 * chain.c32: fix booting from logical partitions (Sergey
41 * Fix errors in the PCI and DMI detection modules (Erwan Velu,
43 * Fix host dependencies and other issues in the build system.
44 * PXELINUX: Allow class E addresses as unicast.
45 * sdi.c32: module to load Microsoft System Deployment Images.
46 For additional information, please see:
47 http://msdn2.microsoft.com/en-us/library/ms838543.aspx
48 * EXTLINUX: Correct reading directories with deleted entries.
49 * Shuffle library: correct the handling of certain geometries
50 (an upward move with source material blocking the move); as
51 required by sdi.c32 but theoretically possible for other
53 * Add "make netinstall" to install /tftpboot.
54 * Fix some documentation files that didn't get moved/renamed.
57 * Clean up garbage after "aborted." message.
58 * Clean up memdump.com filenames.
59 * Support SHA256 and SHA512 encrypted passwords.
60 * The shuffle library now can generate chained descriptors,
61 thus allowing pretty much arbitrarily complex memory maps.
62 * Handle command lines up to 2047 characters, the current
64 * vesamenu: support systems without linear framebuffer support
65 (sigh, what is this, 1993?) and 15-bit RGB modes.
66 * Move the label storage (for the command-line interface) to
67 high memory, removing the size limit and freeing up 64K of
69 * Get rid of 4096-entry limit in the simple menu system.
70 * New hierarchial submenu support: see MENU BEGIN, MENU END,
71 MENU GOTO in doc/menu.txt.
72 * MENU QUIT allows creating a menu entry for returning to the
74 * ISOLINUX: Work around bug in certain Adaptec BIOSes,
75 patch by Bruce Robson.
76 * pngtopnm dependency removed from samples/ directory.
77 * Text documentation files (in doc/) renamed *.doc -> *.txt.
80 * EXTLINUX: fix crash when accessing an empty file.
81 * elf.c32: If a PHDR segment is present, load it.
82 * Fix SHA-1 and MD5 passwords.
83 * ISOLINUX: fix booting when mastered without
84 mkisofs -boot-info-table (broken since 3.50, sigh...)
85 * Handle BIOSes which emit multiple contiguous valid
86 memory regions in the e820 map.
89 * Support for "auxilliary data vector", a small amount of
90 writable storage. Currently only supported for EXTLINUX,
91 but the infrastructure is there for the other derivatives,
92 assuming a suitable storage location can be found.
93 * EXTLINUX: boot-once support (--once, --clear-once, and
95 * A command is now required to the EXTLINUX installer, i.e. at
96 least one of --install, --update, --once, --clear-once, or
100 * PXELINUX: as per RFC 5071, PXELINUX no longer requires the
101 use of the magic cookie option (208) for unencapsulated
102 options. Currently it does not require it for
103 vendor-encapsulated options (vendor-option-space) either,
104 but that MAY be reverted in the future if it causes
106 * Documentation text files moved to a common "doc" directory;
107 man pages from the Debian project added to the "man"
109 * Correct bug with self-overlapping memory areas when using
110 the shuffle interface.
113 * Add "menu separator", "menu indent", "menu disabled"
115 * vesamenu: fix handing of VESA modes with noncontiguous
116 memory buffers. In particular, Qemu/KVM sets up such a mode
117 when Cirrus Logic emulation is enabled (which is the
119 * Support for calling real mode functions using far calls,
120 with argument on the stack. This was implemented to support
121 the BIOS BBS specification, but subsequent experiments show
122 that the at least one of the most common BIOS cores, Award,
123 passes the presence check but doesn't actually implement the
127 * Fix bugs related to the $PnP BIOS functionality on some
129 * PXELINUX: Fix the "naked" version of :: (suppress prefix.)
130 * elf.c32: better error messages.
131 * Faster operation under Intel VT virtualization.
132 * PXELINUX: Fix DHCP bootfile option.
133 * mkdiskimage: Support more than 1024 cylinders.
134 * (Hopefully) fix installer on non-x86 platforms.
135 * Fix shuffle_and_boot_rm, used by linux.c32.
136 * Fix shuffle_and_boot_pm on 386/486.
137 * ISOLINUX (at least): fix bss memory overwrite hang.
138 * MBR: Fix booting from logical partitions.
142 * Handle capitalized F-key commands in the menu system.
143 * Fix padding error when loading multiple ramdisks.
144 * Workaround for VMware crashing when trying to print a
145 message during early kernel boot (does not seem to work,
147 * chain.c32: add the ability to search for a specific MBR
148 signature at runtime.
149 * Fall back to the server identity option if the siaddr field
150 in the DHCP header isn't set. This seems to match the
151 behaviour of most PXE stacks.
152 * mkdiskimage: give the generated disk image an MBR signature.
153 * MEMDISK: Fix failures on some BIOSes.
154 * Simple menu system: new "MENU HIDDEN" option to not display
155 the menu unless the user presses a key.
156 * Simple menu system: support MD5-encrypted passwords (modern
157 Unix standard style, with "$1$" prefixes.)
158 * pcitest.c32: now functions as a full "lspci". Thanks to
159 Erwan Velu for this work.
160 * MEMDISK: Make EDD actually work.
161 * ISOLINUX: Fix for certain broken CD-ROM BIOSes which
162 randomly corrupted register FS.
163 * Simple menu system: fix memory overwrite bug that caused
164 some systems to lock up or behave weirdly.
165 * Fix building on 64-bit systems without a 32-bit libc installed.
168 * EXTLINUX: Fix failure to find the configuration file.
171 * New keywords allow the type of file to be specified in the
173 * It is now supported to load a different configuration file
174 with the CONFIG keyword.
175 * Fix API call 0x0019 (Read Disk.)
176 * MENU AUTOBOOT, MENU TABMSG, MENU PASSPROMPT allows
177 internationalization of menu messages.
178 * A new feature, TEXT HELP, allows the administrator to set
179 a multi-line help message for individual selections.
180 * Fix API call 0x0012 (Cleanup, shuffle and boot.)
181 * New API call "Cleanup, shuffle and boot to flat protected mode"
182 * New API call "Cleanup, shuffle and boot to real mode",
183 similar to API call 0x0012 but allows arbitrary register setting.
184 * Introduce a library interface for loading arbitrary binary
185 formats with relatively easily understood code. See
186 the elf.c32 module for an example on how to use it.
187 * New module "elf.c32", to load a protected-mode ELF kernel.
188 * MBR (old and new): Fix bug in CHS mode when LBA >
190 * vesamenu: fix decoding of palettized PNG images.
191 * Update the Linux kernel boot protocol.
192 * PXELINUX: Press Ctrl-N at the boot prompt to read out the
194 * Instead of the (non-existent) MAC, use the client identifier
195 for networks like Infiniband and Firewire/1394.
196 * Add a new INCLUDE command to the core syslinux parser.
197 * Allow binding help text to F11 and F12.
198 * F-key help now available in the simple menu system.
199 * Disabled the polling for ARP during idle. It is simply too
200 slow on some (broken!) PXE stacks.
201 * PXELINUX: also try to fetch the config file based on UUID.
202 * SYSLINUX/EXTLINUX: New RAID mode (-r) which calls the BIOS
203 to load the next device (typically the next drive) on boot
207 * MEMDISK: Disable EDD by default on floppy disks. EDD can be
208 enabled with the "edd" option and disabled with "noedd".
209 This (hopefully) should make Ghost work again.
210 * SYSLINUX: "unix" installer now uses Linux ioctls instead of
212 * New MBR which can boot from logical partitions.
213 * SYSLINUX: Fix bug in detecting special extensions which was
214 introduced in 3.35 :(
215 * PXELINUX: Unbreak chainbooting FreeBSD (and possibly others.)
218 * MEMDISK: New "safeint" mode.
219 * MEMDISK: Be more compliant with the PnP BIOS spec.
220 * MEMDISK: Turn on EDD support by default.
221 * MEMDISK: Try to work on some machines on which it would not
222 work when there was no floppy drive in the system.
223 * Simple menu system: fix serial console support (broken in
225 * SYSLINUX: Support subdirectories. Like ISOLINUX, the
226 "current directory" is the directory in which syslinux.cfg
227 is found; this is searched for in the sequence
228 /boot/syslinux, /syslinux, /. As a side benefit, label names
229 like "linux-2.6.18" and "linux-2.6.19" are now supported.
231 To install ldlinux.sys in a subdirectory, pass the -d
232 directory option to the SYSLINUX installer.
234 This work was sponsored by slax.org (thanks, Tomas!)
235 * New API call: read disk.
236 * Invoke ONERROR on initrd load failure.
239 * The simple menu system (menu.c32 and vesamenu.c32) now
240 support loading more than one configuration file at a time,
241 using MENU INCLUDE or by specifying multiple filenames.
242 * The MENU COLOR statement can now control the shadowing mode.
245 * libcom32 extended to support graphics mode and graphical console.
246 * vesamenu.c32, new graphical version of the Simple
247 Menu System, see README.menu.
248 * New com32 modules by Erwan Velu do selection based on CPUID
249 or PCI devices present.
250 * RPM spec: add syslinux-tftpboot module; move syslinux by
251 default to the /usr/share/syslinux directory.
252 * RPM spec: extlinux is now a separate package.
255 * EXTLINUX: New options --install (-i) and --update (-U), to
256 make it clear if a boot loader should be installed or
257 updated. For now, defaults to --install for compatibility;
258 a future version will require one of these options.
259 * New library functions to load and place files in memory.
260 * mboot.c32 bug fixes.
261 * Remove 8 MB kernel size restriction.
262 * Add "klibc" target for building unix/syslinux and
263 extlinux/extlinux with klcc (klibc-1.4.27 or later.)
264 * PXELINUX: Fail (and eventually reboot) if no configuration
266 * COM32 module by Erwan Velu to make decisions based on DMI
268 * Fix issue where going back and forth between menus a lot
270 * ISOLINUX: Fix bug which made "cd boot sectors" not work.
273 * MEMDISK: Fix bug by which accessing the real floppy disk
274 as B: in MS-DOS was broken.
275 * Simple menu system: allow tweaking of the screen layout.
276 * Simple menu system: better command-line editing, correctly
277 handle command lines above 256 characters.
278 * PXELINUX: revert memory allocation change that caused
279 problems on some network cards.
280 * MEMDISK: Try work around a bug on some BIOSes when no
281 physical floppy disk is present in the system.
282 * Enable the 16550A FIFOs, if present, when doing serial
284 * New "totaltimeout" command establishes a timeout without
285 regard for any user input.
286 * Simple menu system: timeout behaviour now more in line with
288 * Simple menu system: "ontimeout" should now work correctly.
291 * gcc 4.0.1 compilation fixes.
292 * Add support for querying the PCI BIOS in libcom32
293 (used by ethersel et al.)
294 * Fix PCI handing (ethersel etc) on several old chipsets (and
296 * Try to deal with systems with broken EBIOS.
297 * New API call to do "localboot".
298 * New API call to query features.
299 * New API call to run kernel image, a lower-level call than
300 "run command". See comboot.doc.
301 * Fix for bug in EBIOS code discovered by Arwin Vosselman.
302 * NOESCAPE security fix.
303 * Comments are now recognized even without a space following #.
304 * Fix incorrect handling of mixes of entries with and without
306 * The idle API call now harmlessly returns failure if it is a
307 no-op. That way the caller can decide whether or not to
308 bother invoking it again.
309 * Temporarily disable the idle API call on PXELINUX, due to
310 some platforms on which the idle API call seems to hang; this
311 problem has not yet been debugged.
312 * MEMDISK: the handling of DOSEMU-headered images was broken;
314 * EXTLINUX: symlinks are now supported.
315 * Simple menu system: N and P now work correctly as hotkeys.
316 * MEMDISK: more BIOS bug workarounds.
319 * gcc4 compilation fix.
320 * <BEL> (Ctrl-G) in message files now causes a beep.
321 * Reduce the command line to 511 characters; 1023 caused
325 * SYSLINUX: Fix performance regression (-s mode always
327 * Add API function for idle loop.
328 * libutil: Add do_idle() function for idle loop, make
330 * libutil: Add SHA-1 and base64 functions.
331 * Simple menu system: add password support.
332 * EXTLINUX: Sparse files now handled correctly.
333 * EXTLINUX: Large directories now handled correctly.
334 * ALL: At the prompt, Ctrl-X now forces text mode.
335 * Fix configuration file parsing error, that could cause
337 * Rewritten advanced menuing system from Murali Ganapathy.
338 * MEMDISK: New "bigraw" mode to work around certain broken
340 * COM32 module to boot Multiboot systems, including Xen. See
341 com32/modules/mboot.doc.
342 * Max command line changed to 1023 characters. Note that the
343 kernel proper still can only handle 255 characters without
344 patching, and COM16 binaries can only handle 125 characters.
347 * Fix chainloading (chain.c32).
348 * Fix zlib build problem.
349 * Use a private copy of <linux/ext2_fs.h>.
352 * Fix typo that caused the ramdisk to load in the wrong place.
355 * New API function "shuffle and boot"; allows COM32 modules to
356 load or construct (almost) arbitrarily complex objects,
357 e.g. a kernel and its initrd/initramfs in pieces, and have
358 the API core reorganize memory for booting. (A library API
359 for this function will be introduced in a later version.)
360 * The initrd= option now supports multiple filenames separated
361 by commas. This is mostly useful for initramfs, which can
362 be composed of multiple separate cpio or cpio.gz archives.
363 (Note: all files except the last one are zero-padded to a 4K
364 page boundary. This should not affect initramfs.)
365 * EXTLINUX: Fix API function 000Ah (get derivative-specific
367 * libcom32/ethersel: Support PCI Config Mechanism #2 on
368 machines still infested with that hideous old hack.
369 * SYSLINUX: Fix directory-parsing bug.
372 * SYSLINUX: The "unix" installer now sets the MS-DOS
373 attributes (hidden, system, readonly.)
374 * COM32 library: build the .lnx (test modules for running
375 under Linux) as architecture native modules, in case
376 i386 devel libraries aren't installed.
377 * EXTLINUX: Hack for systems which don't have BLKGETSIZE64
378 defined in the standard header files.
379 * Simple menu system: minor aestetic improvements, and try to
380 work better over a serial console (speed, and readability on
381 monochrome terminal emulators.)
382 * New CONSOLE directive to control output on the video console
383 (useful for dealing with some broken serial-forwarding
385 * New com32 module "ethersel" for searching for an Ethernet
386 card and selecting the proper version of Etherboot.
387 * EXTLINUX: Allow the user to override the detected geometry.
391 * EXTLINUX, SYSLINUX: Fix compile errors on some systems.
392 * EXTLINUX: Default to zipdrive geometry (64 heads, 32
393 sectors) if no other geometry can be detected.
396 * SYSLINUX: Support FAT32 and EDD. As an unfortunate
397 consequence, LDLINUX.SYS is no longer an ordinary file; it
398 is block-mapped at install time, which means it can only be
399 written using the syslinux installers.
400 * SYSLINUX: Reorganize the source code for the installers;
401 each one of the installers (dos, win32, unix, mtools) is now
402 built in its own subdirectory. In particular, "mtools" is
403 the unprivileged installer which uses mtools; "unix" is the
404 privileged installer which uses system calls.
405 * SYSLINUX: Completely rewritten DOS installer in C.
406 * ALL: "label" statement information is now stored in a
407 compressed format, which means that a lot more labels are
408 permitted (500-1000 in a typical configuration, but depends
410 * EXTLINUX: New derivative, which boots from an ext2/ext3
412 * SYSLINUX: The DOS and Win32 installers can now optionally
413 write the boot sector to a file instead of the real boot
414 sector. This is not supported in the Linux installers,
416 * ALL: New NOESCAPE command, disables the "hold down the Shift
417 key to display the prompt" behaviour.
418 * New simple menu system, as an alternative to the advanced
419 menu system already present. See README.menu for details.
420 * PXELINUX: Filenames can now be prefixed with an IP address
421 or DNS name plus :: (e.g. 192.0.2.1::filename or
422 server.domain.com::filename), which downloads a file from an
423 alternate TFTP server, or just a :: (e.g. ::filename), which
424 suppresses the common pathname prefix. See pxelinux.doc.
425 * SYSLINUX: Add an -m option to the DOS and Win32 installers
426 to write an MBR and -a to mark the partition SYSLINUX is
427 being installed on active.
428 * MEMDISK: Give a way to query the boot loader type while
429 running MEMDISK; see memdisk/memdisk.doc and
431 * mkdiskimage: substantially improved mkdiskimage which, among
432 other things, can now be used to initialize USB keys as
433 zipdrives; see README.usbkey for more information.
436 * MEMDISK: Fix command-line parsing "brown paper bag" class
438 * MEMDISK: Add "raw" mode to support the DOS boot disk from
439 WinME/XP, which seems to deliberately crash the system
440 when someone uses the "INT 15h mover" highmem API.
441 * Make "make install" do something sane for the com32
442 development environment.
443 * In the spec file, create a separate -devel RPM for the com32
444 development environment.
447 * Simple C library, based on klibc, for writing COM32
449 * Fix the handling of file length in loading of COM32
451 * MEMDISK: Work around a linker bug by rearranging the code to
452 not use the linker for the 16-bit code.
453 * SYSLINUX: If we're building on a machine without a Win32
454 (mingw) compiler, just skip building syslinux.exe.
455 * ISOLINUX: Support non-mkisofs mastering programs, at least
456 as long as the image is single-session. For best results,
457 ISOLINUX should be the only boot loader installed.
458 * MEMDISK: Allow the user to specify that the simulated disk
459 should be write-protected.
462 * ALL: Add an API call to get the configuration file name.
463 * SYSLINUX: Fix bug in 2.10 that prevented it from working
464 correctly for a lot of people.
465 * SYSLINUX: In the installer, make mtools a bit less fussy.
466 * Make the menu system compile with newer gcc's.
469 * MEMDISK: Handle images compressed with zip as well as with
470 gzip. Some Windows-based image tools apparently generate
471 these kinds of images by default. Patch by Patrick
473 * Major menu improvement from Murali Ganapathy.
474 * ISOLINUX: Wonderfully sick and brilliant workaround for
475 severe bugs in certain Award BIOSes; from Knut Petersen.
476 * SYSLINUX: Fix for the nomtools installed, from Frederic
478 * PXELINUX: Fix handling of IP numbers in the ranges
480 * ALL: New option "allowoptions" (defaults to 1), which
481 controls if options are allowed on the command line or not.
482 * SYSLINUX: Support building under klibc (see the klibc
483 distribution for details.)
486 * SYSLINUX: Remove residual setuid crap from
488 * Handle video pages correctly when using the API functions.
489 * Handle compiling on an x86-64 platform correctly.
490 * Menu system from Murali Krishnan Ganapathy; see the menu
491 directory for information.
492 * COMBOOT: Allow COMBOOT programs to change screen text mode.
493 * COMBOOT: Correct the documentation of how to detect
494 SYSLINUX from COMBOOT!!!!
495 * COMBOOT: Fix "get key without echo" API function.
496 * SYSLINUX: Fix bug that affected the API open function.
497 * ALL: Improve the E820 memory parser, to work around some
501 * Add new configuration command "ontimeout" to allow timeout
502 to have a different action than just pressing Enter.
503 * Add new configuration command "onerror" to allow a custom
504 command to be executed in case the kernel image is not found.
505 * Fix bugs in the COMBOOT/COM32 command-line parsing. APPEND
506 now works with COMBOOT/COM32 images.
507 * PXELINUX: Poll for ARP requests while sitting at the
508 prompt. This makes some boot servers a lot less unhappy.
509 * PXELINUX: Actually free sockets when we get a failure
510 (including file not found.) This bug would cause us to run
511 out of sockets and thus "go deaf" after a while.
512 * MEMDISK: Add an API to query for the existence of MEMDISK.
513 * SYSLINUX: Fix loading boot sectors (.bs/.bss) from floppy
515 * .c32 is now one of the extensions searched for
517 * PXELINUX: RFBG.exe seems to randomly overwrite memory
518 location 0x5700. Thus, don't use it!
519 * PXELINUX: Change pathname length max from 63 to 127; change
520 max vkernels from 128 to 64.
521 * Support Ctrl-U -> kill entire command line input.
522 * The "samples" directory contains a (barely at all tested)
523 chain loading example, chain.c32, which may be used to
524 chainload local floppy disks and hard disks. Use with
525 "chain fdN" or "chain hdN [partition]"; N = 0 for the first
529 * MEMDISK: Workaround for BIOSes which go into a snit when
530 they get a RESET command for the floppy system when there is
531 no floppy in the system.
532 * PXELINUX: Add "ipappend 2", which passes the hardware
533 address of the boot interface to the kernel as a
535 * mkdiskimage: fix the generation of the end limit.
536 * PXELINUX: Fix multiple bugs in chainloading of other NBPs.
537 * MEMDISK: Fix bug that would occationally cause "ran out of
538 input data" when using compressed disk images.
539 * SYSLINUX: Updates for the win32 installer (from Lars Munch.)
540 * PXELINUX: PXELINUX-specific options are now recognized both
541 in a vendor-option-space (a.k.a. type 43 encapsulated) as
542 well as in a site-option-space (unencapsulated.)
543 * COM32: Don't crash when DS != 0.
544 * COMBOOT/COM32: Make file reading work correctly. Thanks to
545 Phung Chi Kien for submitting a test program.
548 * ALL: Fix problem that would occationally cause a
549 boot failure, depending on the length of the kernel.
550 * ISOLINUX: Fix problem that would occationally cause a
551 boot failure, depending on the length of directories.
552 * SYSLINUX: Win32 installer now flushes buffers.
553 * ppmtolss16: Be fully compliant with the PNM spec;
554 actually process comments in the header and odd
555 alignments of the various parameters, as well as
556 "plain" (not raw) files and PBM and PGM files.
557 * PXELINUX: Lower the default MTU to 1472 in order to deal
558 with systems with slightly nonstandard MTUs, and PXE
559 stacks which don't defragment correctly. Unfortunately this
560 is very hard to test dynamically.
563 * PXELINUX: Add a default query based on the hardware address
564 of the boot device. This is in lower case hexadecimal form
565 separated by dashes and including the hardware type, for
566 example, the Ethernet (type 1) address 88:99:AA:BB:CC:DD
567 would query the file pxelinux.cfg/01-88-99-aa-bb-cc-dd.
568 * PXELINUX: Fix bug involving non-IP-based config file names.
569 * SYSLINUX: New installer for WinNT-based systems, from Lars
571 * MEMDISK: Fix handling of memory region overlap when
572 decompressing. Thanks to Mikhail Kupchik for identifying
576 * ALL: Reclaim even more low memory by observing that
577 comboot_seg == real_mode_seg is perfectly fine, and by the
578 fact that the 1000h segment managed to get unused in all
580 * PXELINUX: Attempt to negotiate full Ethernet-sized blocks
581 (1468 bytes) using the blksize option.
582 * SYSLINUX: Resurrect the old no-mtools version of the
583 installer, although as a root-only tool. Some distributors
584 have indicated that they need a small standalone installer.
585 * MEMDISK: Fix a memory offset computation error when
586 installing compressed disks which generally would cause
587 1 MB of memory to be wasted.
588 * MEMDISK: Fix installing the E820 memory map. Calling
589 INT 15h AX=0E820h with MEMDISK 2.03 loaded would give a
590 completely corrupt memory map.
591 * SYSLINUX: Make libsyslinux a dynamic library, so that it can
592 be updated separately from client programs. The whole idea,
593 after all, is to enable alternate programs to become
595 * Include an rpm spec file in the distribution, so rpmbuild
599 * Actually support comment lines in the configuration file.
600 * PXELINUX: Try to resolve some problems with stack switches.
601 * PXELINUX: Handle PXE stacks with broken routing.
602 With these workarounds, the remote install PXE boot floppy
603 (rbfg.exe) from Argon Technologies should work correctly.
604 * Fix problems with Perl scripts in UTF-8 locales.
605 * You probably need NASM 0.98.34 or later to compile this
606 version. 0.98.36 is recommended.
607 * MEMDISK: Now supports gzip compressed images.
610 * SYSLINUX: Security flaws have been found in the SYSLINUX
611 installer when running setuid root. Rewrite the SYSLINUX
612 installer so it uses mtools instead. It therefore now
613 requires mtools (specifically mcopy and mattrib) to exist on
614 your system, but it will not require root privileges and
615 SHOULD NOT be setuid.
618 * MEMDISK: Fix memory sizing bug when the ramdisk crosses the
620 * MEMDISK: Add a "pause" option to stop immediately before
621 booting, to read off the messages.
622 * MEMDISK: Support disk images with DOSEMU headers.
623 * Update the mkdiskimage script to handle newer mtools
624 versions, and be able to generate disk images with DOSEMU
625 headers (controlled by the -d option).
626 * Fix the COM32 sample program.
627 * PXELINUX, ISOLINUX: Fix some COMBOOT API calls.
629 * Build SYSLINUX into a small library for encapsulation into
630 other programs (however, please keep in mind this is a GPL'd
632 * SYSLINUX: Make installer work with "owner" in /etc/fstab.
633 * SYSLINUX: Fix issue with working on nonpartitioned hard disk
634 devices. THIS CONFIGURATION IS NOT RECOMMENDED.
637 * ALL: Add support for "COM32" (32-bit COMBOOT) images.
638 * ALL: Add an API for COMBOOT/COM32 images. See comboot.doc
639 for details. There is a C development environment for
640 COM32 being created; it should be ready at some point in
642 * Fix mbr.asm so that it actually works.
643 * SYSLINUX: The syslinux installer *SHOULD* now be safe to
645 * PXELINUX: Fix bug where PXELINUX would override random
646 chunks of the UNDI code segment! Thanks to Kevin Tran for
648 * ISOLINUX: Fix a bug related to slashes in pathnames.
649 * ISOLINUX: Fix a bug in handling initrds over 128 MB.
650 * ALL: Make the <Ctrl-V> key print out the version; this is
652 * Add a small script, mkdiskimage, to create a DOS-formatted
653 hard disk image using mtools. This may be useful in
654 conjunction with MEMDISK.
655 * ISOLINUX: Search for a /boot/isolinux directory as well as
657 * ALL: Fix a bug related to very long configuration files.
658 * PXELINUX: Work around a NASM bug which would result in no
659 delay before reset if an error occurs.
662 * ISOLINUX: Remove code no longer used which caused hangs on
663 some Toshiba laptops.
666 * ALL: NASM 0.98.32 or later is now required to build
667 SYSLINUX from sources.
668 * SYSLINUX: put back in the workaround for the BIOS floppy
669 table. This seems to be a requirement for "extended" floppy
670 formats to work correctly.
671 * SYSLINUX: No longer warn if one is trying to boot on a 286
672 or older. The above BIOS workaround no longer fits if the
673 requirement to use only 8086-compatible code in the early
674 boot is maintained. It made sense in 1994, but in 2002 a
675 286 or older is a museum object.
676 * SYSLINUX: Use a downright bizarre, stateful algorithm to try
677 to guess the maximum transfer size. I am *hoping* this will
678 cut down on the number of systems for which -s is required
679 to work at any acceptable speed.
680 * ISOLINUX: Add a few more workarounds for various broken El
682 * Make sure .depend files aren't accidentally packed...
683 * ALL: Fix bugs in the extension-detect code; this caused
684 files like COMBOOT images and CD boot sectors to be
685 mis-identified as Linux kernels and rejected.
686 * ALL: Fix the return from COMBOOT.
687 * ALL: Do some of the early groundwork for supporting DOS
688 system calls in COMBOOT.
689 * Get rid of unnecessary "near" directives, making the code
691 * PXELINUX: Put the PXE stack back in the init state before
692 invoking a chain-loaded NBP.
693 * PXELINUX: Actually found the combination of calls that
694 allows some (most?) PXE 2+ stacks to be unloaded from memory
696 * PXELINUX: Add "keeppxe" command-line option to disable
697 the standard unloading of the PXE stack.
700 * SYSLINUX: fix bug that would cause valid kernel images to be
704 * Work on removing gratuitous differences between modules.
705 * Break up the source in common and module-specific files.
706 * PXELINUX: Allow chaining of other PXE NBPs.
707 * ISOLINUX: Allow loading "CD-ROM boot sectors".
708 * ALL: generalize the definition of a boot sector/NBP.
711 * PXELINUX, ISOLINUX: Fix bugs in the new core code.
714 * Fix a "brown paper bag" class bug in the new core code.
717 * Major code restructuring.
718 * Relax the conventional memory limits somewhat.
719 * MEMDISK: Set up the "version number string" pointer in the
721 * SYSLINUX: Fix, again, "the bug that won't die": the use of
722 the offset parameter with the SYSLINUX installer.
723 * SYSLINUX: Fix possible superblock corruption problem in the
727 * Handle bug in the location of initrd.
730 * MEMDISK: Make compile with newer versions of gcc.
733 * ISOLINUX: Support booting disk image files (to boot DOS or
734 other non-Linux operating systems), *IF* the BIOS works
735 correctly; unfortunately many BIOSes apparently don't.
736 * Support Linux boot protocol version 2.03 (explicitly
737 specify the initrd address limit.)
738 * Handle small "pseudo-kernels"; images that use the Linux
739 kernel boot protocols but are less than 64K in size.
740 * MEMDISK: New subsystem; this is a driver which allows
741 legacy OSes to boot using an in-memory simulated disk.
742 See memdisk/memdisk.doc for more info.
743 * PXELINUX, ISOLINUX: Correctly handle files larger than 65535
744 blocks (32 MB for PXELINUX, 128 MB for ISOLINUX.)
745 * PXELINUX: Make a best-effort attempt at freeing all memory
746 claimed. From the looks of it, it will fail on most PXE
750 * Limited support for hardware flow control when using a
752 * Support specifying the serial port I/O address explicitly.
753 * Make DOS installer hopefully behave more nicely when used on
754 recent Windows versions.
755 * Fix returning to text mode when a font has been specified.
756 * Attempt to detect missing serial port hardware and disable
757 the serial port if there is nothing there.
760 * Make the ppmtolss16 program handle color conversion more
762 * Clean up "make install" target, honour INSTALLROOT if it
764 * SYSLINUX: Fix stack-smash bug identified by Steffen
766 * Hopefully fix return-to-text-mode on some graphics cards.
767 * ISOLINUX: Bug workaround for Award BIOS 4.51, and perhaps
768 other buggy BIOSes as well.
771 * PXELINUX: Allow the DHCP server to override the
772 configuration file name and pathname prefix, using
773 "site-specific" DHCP options.
774 * PXELINUX: Documentation fixes.
775 * PXELINUX: Fix the "ipappend" option; the last two values
776 were reversed vs. what the kernel expected.
777 * Introduce a way to return to text mode once we are already
778 in graphics mode. This may be useful for F-key help
780 * Fix several bugs in the way return to text mode was handled.
783 * ISOLINUX: Support full pathname searches. Max length for a
784 pathname is 255 characters. As a result, only 64 "label"
785 statements are supported in ISOLINUX.
786 * PXELINUX: Max filename length extended to 63 characters.
789 * Add support for graphical splash screens.
790 * Add mode control characters, which allows you to control
791 message display output depending on output mode (text,
792 graphics, or serial port.)
793 * ISOLINUX: New program, which boots Linux from a CD-ROM
794 without using floppy emulation mode. See isolinux.doc for
796 * PXELINUX: Don't search for boot sector file types, since
797 they don't work anyway.
798 * SYSLINUX: Document the LOCK command for Win9x, and the error
799 dialog box for WinNT/2K.
802 * PXELINUX: Fix code for finding !PXE from PXENV+. This was
803 due to a spec bug; match the most recent spec since that
804 seems to be what implementations actually do.
805 * SYSLINUX: Add some smarts to the boot sector, which
806 hopefully should reduce the number of systems which require
807 stupid mode ("syslinux -s").
808 * PXELINUX: Document further some of the pathologies with old
810 * When specifying a "default" command line, no longer
811 automatically appent "auto". See the "DEFAULT" command in
812 syslinux.doc for more information.
813 * PXELINUX: Clean up the allocation of local socket numbers.
816 * PXELINUX: Rename pxelinux.bin to pxelinux.0, to match what
817 most PXE servers seem to expect.
818 * PXELINUX: Update the DHCP/boot server setup documentation.
819 * PXELINUX: Support new "localboot" option for "label"
821 * PXELINUX: More robust parsing of DHCP/boot server packets.
822 * PXELINUX: Include a small utility program "gethostip" to
823 compute hexadecimal IP addresses.
826 * PXELINUX: Fix bugs introduced by new A20 code. (SYSLINUX
827 has also been changed for code consistency reasons, but I'm
828 pretty sure the changes are don't care on SYSLINUX.)
829 * Documentation updates.
830 * PXELINUX: Add "ipappend" option to generate an ip= option to
834 * PXELINUX: Not all PXE stacks fill in the IP address for a
835 type 3 cached info query. Use a type 2 cached info query
836 for this information (only.)
837 * Yet another attempt at A20 coding. Now support BIOS call
838 15:2401 as well, and handle machines which always have A20
840 * Support memory detection using INT 15h, AX=0E820h. BIOS
841 manufacturers have apparently gotten sloppy about keeping
842 INT 15h, AX=0E801h working properly.
843 * Don't issue <CR><LF> onto the serial port when we're doing
847 * Yet another A20-code update. It seems some "legacy-free"
848 machines and embedded gear simply don't have a KBC to talk
849 to, and that waiting for one will wait forever. Sigh.
852 * SYSLINUX: Implement a hack for BIOS drivers which hog significant
853 chunks of low memory during boot. (Note: PXELINUX already
854 had this modification. SYSLINUX does still require that the
855 low 512K is available; PXELINUX requires 384K. Machines
856 with a physical memory hole in the low 640K cannot boot
857 Linux no matter what.) Depending what the reason is for the
858 memory hole, a new kernel (2.4.0-test3-pre3 or later) may be
860 * SYSLINUX: Default installer binary now compiled against
861 glibc 2.1. If this is inappropriate for your system and you
862 still want to use the offical version of SYSLINUX, please
863 follow the instructions in "distrib.doc" to rebuild the
865 * SYSLINUX: Linux installer program now supports -o <offset>
866 option which does a loopback mount with the
867 -o loop,offset=<> option. Useful to run SYSLINUX on an
868 individual partition of a whole-harddisk image.
869 * Include the source code to a Master Boot Record (MBR)
870 functionally equivalent to the one installed DOS except it
871 includes EBIOS support, and should be resistant to geometry
872 changes. The MBR code is public domain.
873 * PXELINUX: Fix "double p" bug: if the tftp prefix was null,
874 all filenames would get a "p" preprended, e.g.
875 "ppxelinux.cfg" and "pvmlinux".
878 * PXELINUX: Workaround for PXE ROMs based on the Intel PXE PDK
879 3.0 build 071 and earlier: missing !PXE structure pointer.
880 * PXELINUX: Handle larger BOOTP/DHCP packages.
881 * PXELINUX: The command line passing was broken; fix.
882 * PXELINUX: Make COMBOOT images work.
883 * PXELINUX: Documentation on how to make booting work using
884 the PDK 3.0-derived clients, which aren't so generous as to
885 allow booting with only "PXEClient" specified.
888 * PXELINUX: RFC 1123 states that a TFTP implementation MUST
889 use adaptive timeout, "at least an exponential backoff of
890 retransmission timeout is necessary." Implement a very
891 simple exponential backoff for retransmits.
892 * PXELINUX: Updated documentation, including pointer to new
894 * PXELINUX: When sending ERROR due to bad OACK, use the proper
895 destination port number (why are TFTP port numbers so odd?)
896 * PXELINUX: If the boot dies in the middle somewhere,
897 eventually give up and reset the machine (unattended
901 * New program PXELINUX to do network booting using a
902 PXE-compliant (Pre-Execution Environment) network booting
903 PROM. See pxelinux.doc for details.
906 * Serial console support. See syslinux.doc for details.
909 * Change HIGHMEM_MAX to 38000000h to (hopefully) avoid the
910 kernel stepping on it; 3f000000h was apparently a higher
911 limit than the kernel used!
914 * Add sys2ansi.pl script to display the contents of a
915 colorized SYSLINUX file.
916 * Changed the io_delay once again, after a report that the
917 old delay port causes hangs on some systems.
920 * Frob the "fast A20 gate" port as well as the keyboard
921 controller; will this help systems with problems?
922 * Be even more paranoid about A20, unfortunately even this
923 seems to be not paranoid enough... what I don't understand
924 is that if there is hardware out there *this broken*, how
925 can it run Linux at all? Report an error message rather
926 than hang forever if A20 is stuck.
927 * Include some intermediate files in the distribution, plus
928 provide a "make installer" target for distributors to relink
929 the install programs only. I would prefer the syslinux boot
930 loader proper to be "binary clean" for debuggablity -- use
931 "make clean ; make installer" to rebuild the installers only.
934 * Don't get confused by directories, volume labels, or VFAT
936 * Use INT 15h, AX=0E801h to query memory size before trying
937 INT 15h, AH=88h. This not only provides more headroom
938 between the kernel and the initrd on large-memory machines,
939 but it appears some recent BIOSes actually have started
940 returning garbage for the AH=88h (older) call.
941 * Trust high memory beyond the 15 MB mark if the user has
942 specified it, or if obtained with INT 15h, AH=0E801h (with
943 no memory holes above 1 MB.)
946 * Increase A20M delay and put in a test to avoid problems on
947 certain IBM Thinkpads (thanks to Donnie Barnes of RedHat
948 for vital info on this one.)
949 * Support COMBOOT style boot command images.
950 * Support chain loading (foreign operating systems, e.g. DOS).
951 * Include a new "copybs" DOS utility to copy a boot sector to
952 a file (under Linux, use "dd".)
953 * Fix the DOS installer to work for disks over 32 MB.
954 * SYSLINUX should now handle disks with more than 65536 tracks.
957 * Fix a bug that caused "label" statements in syslinux.cfg to
958 not be handled properly.
959 * Updated the documentation. Among other things, we now allow
960 up to 128 "label" statements.
963 * Fix for booting old (pre-initrd) kernels.
964 * It seems at least some versions of OS/2 doesn't set up all
965 the fields in the superblock correctly. Account for that.
966 * Fix bug that caused boot failure when using the mem= option.
969 * Loading from partitions now should work properly. (Actually
970 tested, this time. You should even be able to dd a floppy
971 to a partition and boot from it.)
972 * Removed large workaround code for an alleged ancient BIOS
973 bug I have never actually seen. The -s option should work
974 on those machines, anyway.
975 * Support for simple keyboard remappings, same as used by
976 LILO (once again to support localization.) The program
977 keytab-lilo.pl from the LILO distribution included to
979 * Added a "safe, slow and stupid" (-s) option to the
980 installers. This option will lobotomize the boot sector to
981 hopefully work on even very buggy BIOSes.
984 * Ability to load a VGA font on bootup (for localized Linux
988 * Bug fix in the Linux installer.
989 * Added a workaround for a bug in certain AMI/Intel BIOSes
990 when booting from CD-ROM.
991 * Documentation changes.
994 * FAT16 filesystems are now supported.
997 * Now compiles under Linux, using NASM, rather than using
998 Turbo Assembler under DOS. See http://www.cryogen.com/Nasm
999 for information about NASM.
1000 * Linux-hosted SYSLINUX installer, as well as a
1001 rewritten DOS installer (now is written in assembler, so we
1002 don't need Turbo C.)
1005 * Added support for loading bzImage and initrd loading, and made
1006 SYSLINUX new-setup-code aware (SYSLINUX 1.30 id=0x31).
1007 * Added LILO-style kernel labels; see the LABEL and IMPLICIT
1008 keywords in README file.
1009 * Added support for colorization of intro and help screens.
1010 * The vga= option is now handled correctly.
1011 * Massive rewrite of large chunks of the code in order to
1012 support the first two new features.
1015 * Added simple online help at the "boot:" prompt.
1016 * Removed 2880K image as I no longer have access to such a
1017 floppy drive. (Donations accepted!!)
1018 * Decided to distribute the source in a subdirectory rather
1019 than in a nested zipfile.
1022 * Removed a sanity check which would cause booting to fail on
1023 Phoenix BIOS version 4.03. Apparently this BIOS is buggy.
1026 * Added configuration file SYSLINUX.CFG. This file contains all
1027 configurable options, and can be edited from any OS which can
1028 access an MS-DOS filesystem; there is no longer a need to run
1029 SYSLINUX.EXE except to write the boot sector.
1030 * Default command line now given by "default" line in config
1032 * LINUXMSG.TXT and BOOTMSG.TXT hard-coded file names replaced by
1033 "display" and "prompt" lines in config file.
1034 * LILO-style option appending now supported ("append" line in
1036 * Prompt timeout is now supported ("timeout" line in config
1037 file). The timeout is cancelled when anything is typed on the
1039 * Pressing <ESC> or <Ctrl-C> at the Loading... stage now aborts
1040 the kernel loading in progress and returns the user to the
1042 * The installer now automatically sets the READONLY flag on
1044 * Added 2880K disk image.
1047 * Fixed bug that would prevent booting from double-density
1048 floppies and other DOS filesystems with multiple sectors per
1050 * Added 720K disk image.
1051 * Changed default kernel name on disk images to LINUX.
1054 * Fixed bug that would garble the command line on recent kernels
1055 with more than 4 sectors of setup code (this wasn't really a
1056 *bug*; rather, a kernel change broke the code. Unfortunately
1057 the Linux boot interface is still sorely undocumented).
1058 * Added BOOTMSG.TXT file support (message file which does not
1059 force display of the boot prompt).
1062 * Fixed bug on some (most?) 386 BIOSes would require two boot