3 "Project-Id-Version: survex\n"
4 "Report-Msgid-Bugs-To: olly@survex.com\n"
5 "POT-Creation-Date: 1999-08-26 12:23:58 +0000\n"
6 "PO-Revision-Date: 2014-01-15 22:05:08 +0000\n"
7 "Last-Translator: Adolfo Jayme <fitoschido@gmail.com>\n"
10 "Content-Type: text/plain; charset=utf-8\n"
11 "Content-Transfer-Encoding: 8bit\n"
14 #. TRANSLATORS: Aven menu titles. An “&” goes before the letter of any
15 #. accelerator key. The accelerators must be different within this group
16 #: ../src/mainfrm.cc:986
21 #: ../src/mainfrm.cc:987
26 #: ../src/mainfrm.cc:988
31 #: ../src/mainfrm.cc:989
36 #: ../src/mainfrm.cc:991
41 #: ../src/mainfrm.cc:1003
46 #. TRANSLATORS: "Presentation" in the sense of a talk with a slideshow -
47 #. the items in this menu allow the user to animate between preset
49 #: ../src/mainfrm.cc:996
52 msgstr "&Presentación"
54 #. TRANSLATORS: as in: Usage: cavern …
55 #: ../src/cmdline.c:168
60 #. TRANSLATORS: "%lu" is a placeholder for the number of bytes which Survex
61 #. was trying to allocate space for.
62 #: ../src/message.c:76
65 msgid "Out of memory (couldn’t find %lu bytes)."
66 msgstr "Memoria insuficiente (se necesitan %lu bytes de más)."
68 #. TRANSLATORS: %s will be replaced by the filename that we were trying
69 #. to read when we ran out of memory.
70 #: ../src/img_hosted.c:34
73 msgid "Out of memory trying to read file “%s”"
74 msgstr "Memória insuficiente: “%s”"
76 #. TRANSLATORS: Feel free to translate as "or newer" instead of "or
77 #. greater" if that gives a more natural translation. It's
78 #. technically not quite right when there are parallel active release
79 #. series (e.g. Survex 1.0.40 was released *after* 1.2.0), but this
80 #. seems unlikely to confuse users. "Survex" is the name of the
81 #. software, so should not be translated.
83 #. Here "survey" is a "cave map" rather than list of questions - it should be
84 #. translated to the terminology that cavers using the language would use.
85 #: ../src/commands.c:2258
88 msgid "Survex version %s or greater required to process this survey data."
89 msgstr "Para procesar estos datos topográficos se requiere la versión %s de Survex (o superior)."
91 #. TRANSLATORS: Indicates a warning message e.g.:
92 #. "spoon.svx:12: warning: *prefix is deprecated"
94 #: ../src/cavernlog.cc:660
95 #: ../src/message.c:1220
100 #. TRANSLATORS: Indicates an error message e.g.:
101 #. "spoon.svx:13:4: error: Field may not be omitted"
102 #: ../src/cavernlog.cc:659
103 #: ../src/message.c:1224
108 #. TRANSLATORS: %s is replaced by the filename of the parent file, and %u
109 #. by the line number in that file. Your translation should also contain
110 #. %s:%u so that automatic parsing of error messages to determine the file
111 #. and line number still works.
112 #: ../src/datain.c:107
115 msgid "In file included from %s:%u:\n"
116 msgstr "En el archivo incluido desde %s:%u:\n"
118 #. TRANSLATORS: If you're unsure what "deprecated" means, see:
119 #. https://en.wikipedia.org/wiki/Deprecation
120 #: ../src/commands.c:644
122 msgid "*prefix is deprecated - use *begin and *end instead"
123 msgstr "*prefix ya no se usa - utiliza *begin y *end en su lugar"
125 #. TRANSLATORS: Here "station" is a survey station, not a train station.
126 #: ../src/readval.c:209
129 msgid "Character “%c” not allowed in station name (use *SET NAMES to set allowed characters)"
130 msgstr "Carácter “%c” no permitido en el nombre de una estación (utiliza *SET NAMES para definir los caracteres permitidos)"
132 #: ../src/readval.c:395
134 msgid "Field may not be omitted"
135 msgstr "Campo que no puede ser omitido"
137 #: ../src/datain.c:1630
138 #: ../src/datain.c:1665
139 #: ../src/datain.c:2014
140 #: ../src/readval.c:397
141 #: ../src/readval.c:445
142 #: ../src/readval.c:475
145 msgid "Expecting numeric field, found “%s”"
146 msgstr "Se espera un campo numérico; encontrado “%s”"
148 #: ../src/commands.c:1839
151 msgid "Found “%s”, expecting “PRESERVE”, “TOUPPER”, or “TOLOWER”"
152 msgstr "Encontrado “%s”, esperando “PRESERVE”, “TOUPPER”, o “TOLOWER”"
156 #: ../src/matrix.c:352
158 msgid "Bug in program detected! Please report this to the authors"
159 msgstr "Error detectado en el programa! Por favor comunícalo a los autores"
161 #: ../src/commands.c:2388
162 #: ../src/extend.c:449
165 msgid "Unknown command “%s”"
166 msgstr "Comando desconocido “%s”"
168 #. TRANSLATORS: Here "station" is a survey station, not a train station.
169 #: ../src/netbits.c:449
172 msgid "Station “%s” equated to itself"
173 msgstr "Estación “%s” igualada a si misma"
175 #. TRANSLATORS: Here "legs" are survey legs, i.e. measurements between
177 #: ../src/datain.c:1171
179 msgid "Compass reading may not be omitted except on plumbed legs"
180 msgstr "La lectura de la brújula no se puede omitir excepto en tiradas a plomo"
182 #: ../src/datain.c:1809
183 #: ../src/datain.c:1930
185 msgid "Tape reading may not be omitted"
186 msgstr "Lectura de longitud no se puede omitir"
188 #: ../src/datain.c:382
189 #: ../src/extend.c:454
191 msgid "End of line not blank"
192 msgstr "Fin de línea no vacio"
194 #: ../src/cavern.c:384
197 msgid "There were %d warning(s)."
198 msgstr "Havia %d alerta(s)."
200 #. TRANSLATORS: %s is replaced by the command we attempted to run.
201 #: ../src/cavernlog.cc:433
202 #: ../src/cavernlog.cc:478
203 #: ../src/mainfrm.cc:2140
206 msgid "Couldn’t run external command: “%s”"
207 msgstr "No se pudo ejecutar la orden “%s”"
209 #: ../src/datain.c:85
210 #: ../src/datain.c:93
211 #: ../src/datain.c:128
212 #: ../src/datain.c:149
213 #: ../src/datain.c:166
214 #: ../src/datain.c:849
215 #: ../src/extend.c:633
216 #: ../src/sorterr.c:80
217 #: ../src/sorterr.c:97
218 #: ../src/sorterr.c:240
220 msgid "Error reading file"
221 msgstr "Error al leer el archivo"
223 #: ../src/message.c:1240
225 msgid "Too many errors - giving up"
226 msgstr "Demasiados errores - proceso abandonado"
228 #. TRANSLATORS: If you're unsure what "deprecated" means, see:
229 #. https://en.wikipedia.org/wiki/Deprecation
230 #: ../src/commands.c:1720
232 msgid "*DEFAULT is deprecated - use *CALIBRATE/DATA/SD/UNITS with argument DEFAULT instead"
233 msgstr "*DEFAULT ya no se usa - utiliza *CALIBRATE/DATA/SD/UNITS con el argumento DEFAULT en su lugar"
235 #. TRANSLATORS: A "plumbed leg" is one measured using a plumbline
236 #. (a weight on a string). So the problem here is that the leg is
237 #. vertical, so a compass reading has no meaning!
238 #: ../src/datain.c:1141
240 msgid "Compass reading given on plumbed leg"
241 msgstr "Lectura de brújula en una tirada vertical"
243 #: ../src/commands.c:738
245 msgid "END with no matching BEGIN in this file"
246 msgstr "END sin el correspondiente BEGIN en este archivo"
248 #: ../src/datain.c:836
250 msgid "BEGIN with no matching END in this file"
251 msgstr "BEGIN sin el correspondiente END en este archivo"
253 #. TRANSLATORS: A station must be exported out of each level it is in, so
254 #. this would give "Station “\outer.inner.1” not exported from survey
257 #. *equate entrance outer.inner.1
265 #. Here "survey" is a "cave map" rather than list of questions - it should be
266 #. translated to the terminology that cavers using the language would use.
267 #: ../src/commands.c:1096
268 #: ../src/commands.c:1098
269 #: ../src/listpos.c:104
270 #: ../src/readval.c:332
271 #: ../src/readval.c:335
274 msgid "Station “%s” not exported from survey “%s”"
275 msgstr "La estació “%s” no ha sido exportada desde la topografía “%s”"
277 #. TRANSLATORS: This error occurs if there's an attempt to
278 #. export a station from a survey which doesn't actually exist.
280 #. Here "survey" is a "cave map" rather than list of questions - it should be
281 #. translated to the terminology that cavers using the language would use.
282 #: ../src/listpos.c:112
285 msgid "Reference to station “%s” from non-existent survey “%s”"
286 msgstr "Referencia a la estación “%s” desde una topografía inexistente “%s”"
288 #. TRANSLATORS: Here "station" is a survey station, not a train station.
290 #. Here "survey" is a "cave map" rather than list of questions - it should be
291 #. translated to the terminology that cavers using the language would use.
292 #: ../src/readval.c:306
295 msgid "“%s” can’t be both a station and a survey"
296 msgstr "“%s” no puede ser a la vez una estación y una topografía"
298 #. TRANSLATORS: Here "station" is a survey station, not a train station.
299 #: ../src/extend.c:252
300 #: ../src/extend.c:271
301 #: ../src/extend.c:318
302 #: ../src/extend.c:362
303 #: ../src/extend.c:406
304 #: ../src/readval.c:205
306 msgid "Expecting station name"
307 msgstr "Esperando un nombre de estación"
309 #: ../src/commands.c:2175
312 msgid "Found “%s”, expecting “EQUATES”, “EXPORTS”, or “PLUMBS”"
313 msgstr "Encontrado “%s”, esperando “EQUATES”, “EXPORTS”, o “PLUMBS”"
315 #: ../src/commands.c:2181
318 msgid "Found “%s”, expecting “ON” or “OFF”"
319 msgstr "Encontrado “%s”, esperando “ON” o “OFF”"
321 #. TRANSLATORS: EQUATE is a command name, so shouldn’t be
324 #. Here "station" is a survey station, not a train station.
325 #: ../src/commands.c:1055
327 msgid "Only one station in EQUATE command"
328 msgstr "Solo una estación en la orden EQUATE"
330 #. TRANSLATORS: A "quantity" is something measured like "LENGTH",
331 #. "BEARING", "ALTITUDE", etc.
332 #: ../src/commands.c:462
335 msgid "Unknown quantity “%s”"
336 msgstr "Cantidad “%s” desconocida"
338 #: ../src/commands.c:378
341 msgid "Unknown units “%s”"
342 msgstr "Unidades “%s” desconocidas"
344 #: ../src/commands.c:2009
345 #: ../src/commands.c:2085
347 msgid "Unknown coordinate system"
348 msgstr "Sistema de coordenadas desconocido"
350 #: ../src/commands.c:2107
351 #: ../src/commands.c:2135
354 msgid "Invalid coordinate system: %s"
355 msgstr "El sistema de coordenadas no es válido: %s"
357 #: ../src/commands.c:2093
358 #: ../src/commands.c:2114
360 msgid "Coordinate system unsuitable for output"
363 #: ../src/commands.c:870
364 #: ../src/commands.c:1678
367 msgid "Failed to convert coordinates: %s"
368 msgstr "Falló la conversión de las coordenadas: %s"
370 #: ../src/commands.c:873
372 msgid "The input projection is set but the output projection isn't"
375 #: ../src/commands.c:875
377 msgid "The output projection is set but the input projection isn't"
380 #: ../src/commands.c:829
382 msgid "Coordinates can't be omitted when coordinate system has been specified"
385 #: ../src/commands.c:1664
387 msgid "Input coordinate system must be specified for “*DECLINATION AUTO”"
390 #: ../src/commands.c:1656
392 msgid "Expected number or “AUTO”"
395 #: ../src/datain.c:982
397 msgid "No survey date specified - using 0 for magnetic declination"
400 #. TRANSLATORS: Used when a BEGIN command has no survey, but the
401 #. END command does, e.g.:
405 #. *end entrance <--[Message given here]
406 #: ../src/commands.c:768
409 msgid "Matching BEGIN command has no survey name"
410 msgstr "La instrucción BEGIN correspondiente no tiene prefijo"
412 #. TRANSLATORS: Note: In English you talk about the *units* of a single
413 #. measurement, but the correct term in other languages may be singular.
414 #: ../src/commands.c:390
417 msgid "Invalid units “%s” for quantity"
418 msgstr "Unidades “%s” inválidas para cantidad"
420 #: ../src/commands.c:454
423 msgid "Unknown instrument “%s”"
424 msgstr "Instrumento “%s” desconocido"
426 #. TRANSLATORS: DECLINATION is a built-in keyword, so best not to
428 #: ../src/commands.c:1629
430 msgid "Scale factor must be 1.0 for DECLINATION"
431 msgstr "El factor de escala debe ser 1.0 para el comando DECLINATION"
433 #. TRANSLATORS: If the scale factor for an instrument is zero, then any
434 #. reading would be mapped to zero, which doesn't make sense.
435 #: ../src/commands.c:1637
437 msgid "Scale factor must be non-zero"
438 msgstr "El factor de escala debe de ser diferente de cero"
440 #: ../src/commands.c:1738
443 msgid "Unknown setting “%s”"
444 msgstr "Configuración “%s” desconocida"
446 #: ../src/commands.c:499
449 msgid "Unknown character class “%s”"
450 msgstr "Clase de carácter desconocida “%s”"
452 #: ../src/extend.c:643
453 #: ../src/netskel.c:93
455 msgid "No survey data"
456 msgstr "Ningún dato de topografia"
458 #: ../src/filename.c:52
459 #: ../src/img_hosted.c:39
462 msgid "Filename “%s” refers to directory"
463 msgstr "Nombre de archivo “%s” referido a un directorio"
465 #. TRANSLATORS: At the end of processing (or if a *SOLVE command is used)
466 #. cavern will issue this error if there are any sections of the survey
467 #. network which are hanging.
468 #: ../src/netartic.c:387
470 msgid "Survey not all connected to fixed stations"
471 msgstr "La topografia no está completamente conectada a estaciones fijas"
473 #: ../src/commands.c:985
474 #: ../src/datain.c:765
476 msgid "Station already fixed or equated to a fixed point"
477 msgstr "Estación ya fijada o igualada a un punto fijado"
479 #: ../src/cavern.c:289
480 #: ../src/filename.c:55
481 #: ../src/gfxcore.cc:3824
482 #: ../src/img_hosted.c:35
485 msgid "Failed to open output file “%s”"
486 msgstr "No se pudo abrir el archivo de salida “%s”"
488 #: ../src/commands.c:882
489 #: ../src/commands.c:896
490 #: ../src/commands.c:908
491 #: ../src/commands.c:1793
493 msgid "Standard deviation must be positive"
494 msgstr "La desviación estándard tiene que ser positiva"
496 #. TRANSLATORS: Here a "survey leg" is a set of measurements between two
497 #. "survey stations".
499 #. %s is replaced by the name of the station.
500 #: ../src/netbits.c:346
503 msgid "Survey leg with same station (“%s”) at both ends - typing error?"
504 msgstr "Tirada con la misma estación en ambas puntas (“%s”) - error de transcripción?"
506 #. TRANSLATORS: %.f%s will be replaced with a right angle in the
507 #. units currently in use, e.g. "90°" or "100ᵍ". And "absolute
508 #. value" means the reading ignoring the sign (so it might be
510 #: ../src/datain.c:1062
511 #: ../src/datain.c:1075
514 msgid "Clino reading over %.f%s (absolute value)"
515 msgstr "Lectura del clino superior a %.f%s (valor absoluto)"
517 #: ../src/netbits.c:464
520 msgid "Tried to equate two non-equal fixed stations: “%s” and “%s”"
521 msgstr "Tentativa de igualar dos estaciones fijadas en coordenadas diferentes: “%s” y “%s”"
523 #. TRANSLATORS: "equal" as in:
528 #: ../src/netbits.c:475
531 msgid "Equating two equal fixed points: “%s” and “%s”"
532 msgstr "Igualando dos estaciones fijadas en las mismas coordenadas: “%s” y “%s”"
534 #. TRANSLATORS: " *fix a " gives this message:
535 #: ../src/commands.c:839
537 msgid "FIX command with no coordinates - fixing at (0,0,0)"
538 msgstr "Comando FIX sin coordenades - se fijará en (0,0,0)"
540 #. TRANSLATORS: *fix a 1 2 3 / *fix a 1 2 3
541 #: ../src/commands.c:989
542 #: ../src/datain.c:767
544 msgid "Station already fixed at the same coordinates"
545 msgstr "Estación fijada previamente en las mismas coordenadas"
547 #. TRANSLATORS: Emitted after second and subsequent "FIX command with
548 #. no coordinates - fixing at (0,0,0)" warnings.
549 #: ../src/commands.c:848
552 msgid "Already had FIX command with no coordinates for station “%s”"
553 msgstr "Más de un comando FIX sin coordenadas: “%s”"
555 #: ../src/commands.c:1892
558 msgid "Station “%s” fixed before CS command first used"
561 #. TRANSLATORS: The *EXPORT command is only valid just after *BEGIN
562 #. <SURVEY>, so this would generate this error:
568 #: ../src/commands.c:2402
570 msgid "*EXPORT must immediately follow “*BEGIN <SURVEY>”"
571 msgstr "*EXPORT debe seguir inmediatamente a “*BEGIN <TOPOGRAFÍA>”"
573 #: ../src/readval.c:532
575 msgid "Invalid year (< 1900 or > 2078)"
576 msgstr "Año inválido (< 1900 ó > 2078)"
578 #. TRANSLATORS: Suspicious means something like 410 degrees or -20
580 #: ../src/datain.c:950
581 #: ../src/datain.c:959
583 msgid "Suspicious compass reading"
584 msgstr "Lectura de brújula sospechosa"
586 #: ../src/datain.c:1637
588 msgid "Negative tape reading"
589 msgstr "Lectura de longitud negativa"
591 #: ../src/commands.c:834
593 msgid "Same station fixed twice with no coordinates"
594 msgstr "La misma estación se fijó dos veces sin coordenadas"
596 #. TRANSLATORS: This means that the data fed in said this.
598 #. It could be a gross error (e.g. the decimal point is missing from the
599 #. depth gauge reading) or it could just be due to random error on a near
601 #: ../src/datain.c:1326
603 msgid "Tape reading is less than change in depth"
604 msgstr "Lectura de longitud inferior a la diferencia de profundidades"
606 #. TRANSLATORS: a data "style" is something like NORMAL, DIVING, etc.
607 #. a "reading" is one of FROM, TO, TAPE, COMPASS, CLINO for NORMAL
608 #. neither style nor reading is a keyword in the program This error
609 #. complains about a depth gauge reading in normal style, for example
610 #: ../src/commands.c:1320
613 msgid "Reading “%s” not allowed in data style “%s”"
614 msgstr "Campo “%s” no permitido en este estilo de datos “%s”"
616 #. TRANSLATORS: i.e. not enough readings for the style.
617 #: ../src/commands.c:1501
620 msgid "Too few readings for data style “%s”"
621 msgstr "Faltan campos para el estilo de datos “%s”"
623 #. TRANSLATORS: e.g. trying to refer to an invalid FNORD data style
624 #: ../src/commands.c:1281
627 msgid "Data style “%s” unknown"
628 msgstr "Estilo de datos “%s” desconocido"
630 #. TRANSLATORS: Here "station" is a survey station, not a train station.
632 #. Exporting a station twice gives this error:
639 #: ../src/commands.c:1150
642 msgid "Station “%s” already exported"
643 msgstr "La estación “%s” ya ha sido exportada anteriormente"
645 #. TRANSLATORS: complains about a situation like trying to define
646 #. two from stations per leg
647 #: ../src/commands.c:1345
650 msgid "Duplicate reading “%s”"
651 msgstr "Campo duplicado “%s”"
653 #: ../src/commands.c:1015
656 msgid "FLAG “%s” unknown"
657 msgstr "FLAG “%s” desconocido"
659 #: ../src/readval.c:489
664 #. TRANSLATORS: Here "station" is a survey station, not a train station.
665 #: ../src/listpos.c:122
668 msgid "Station “%s” referred to just once, with an explicit survey name - typo?"
669 msgstr "La estacioón “%s” solo ha sido usada una vez, con un prefijo explícito - error tipográfico?"
671 #. TRANSLATORS: Here "station" is a survey station, not a train
673 #: ../src/netartic.c:405
675 msgid "The following survey stations are not attached to a fixed point:"
676 msgstr "Las siguientes estaciones no están conectadas a un punto fijo:"
678 #: ../src/netskel.c:138
681 msgid "Survey has no fixed points. Therefore I’ve fixed %s at (0,0,0)"
682 msgstr "La topografia no tiene puntos fijados. De todos modos he fijado %s en (0,0,0)"
684 #. TRANSLATORS: fixed survey station that is not part of any survey
685 #: ../src/netskel.c:961
688 msgid "Unused fixed point “%s”"
689 msgstr "Punto fijado no utilizado “%s”"
691 #: ../src/matrix.c:123
693 msgid "Network solved by reduction - no simultaneous equations to solve."
694 msgstr "Red resuelta por reducción - ningún sistema de ecuaciones por resolver."
696 #: ../src/matrix.c:134
699 msgid "Solving %d simultaneous equations"
700 msgstr "Resolviendo un sistema de %d ecuaciones"
702 #. TRANSLATORS: This is an error from the *DATA command. It
703 #. means that a reading (which will appear where %s is isn't
704 #. valid as the list of readings has already included the same
705 #. reading, or an equivalent one (e.g. you can't have both
706 #. DEPTH and DEPTHCHANGE together).
707 #: ../src/commands.c:1409
710 msgid "Reading “%s” duplicates previous reading(s)"
711 msgstr "El campo “%s” duplica campo(s) precedente(s)"
713 #: ../src/matrix.c:132
715 msgid "Solving one equation"
716 msgstr "Resolviendo una ecuación"
718 #: ../src/datain.c:1101
719 #: ../src/datain.c:1315
720 #: ../src/datain.c:1511
722 msgid "Negative adjusted tape reading"
723 msgstr "Distancia ajustada negativa"
725 #: ../src/commands.c:2299
726 #: ../src/commands.c:2321
728 msgid "Date is in the future!"
729 msgstr "La fecha es en el futuro!"
731 #: ../src/commands.c:2326
733 msgid "End of date range is before the start"
734 msgstr "La fecha final es anterior a la incial"
736 #. TRANSLATORS: e.g. the user specifies a passage cross-section at
737 #. station "entrance.27", but there is no station "entrance.27" in
739 #: ../src/netskel.c:1049
742 msgid "Cross section specified at non-existent station “%s”"
743 msgstr "Se ha especificado una sección transversal en la estación inexistente “%s”"
745 #. TRANSLATORS: In data with backsights, the user has tried to give a
746 #. plumb for the foresight and a clino reading for the backsight, or
747 #. something similar.
748 #: ../src/datain.c:1125
750 msgid "CLINO and BACKCLINO readings must be of the same type"
751 msgstr "Las lecturas de CLINO y BACKCLINO deben de ser del mismo tipo"
753 #. TRANSLATORS: We've been told the foresight and backsight are
754 #. both "UP", or that they're both "DOWN".
755 #: ../src/datain.c:1150
757 msgid "Plumbed CLINO and BACKCLINO readings can't be in the same direction"
760 #: ../src/readval.c:543
762 msgid "Invalid month"
763 msgstr "Mes inválido"
765 #. TRANSLATORS: e.g. 31st of April, or 32nd of any month
766 #: ../src/readval.c:554
768 msgid "Invalid day of the month"
769 msgstr "El dia del mes es inválido"
771 #: ../src/cavern.c:238
774 msgid "3d file format versions %d to %d supported"
777 #: ../src/readval.c:203
779 msgid "Expecting survey name"
780 msgstr "Esperando un nombre de topografía"
782 #: ../src/datain.c:503
783 #: ../src/extend.c:628
784 #: ../src/img_hosted.c:30
785 #: ../src/mainfrm.cc:424
786 #: ../src/sorterr.c:146
789 msgid "Couldn’t open file “%s”"
790 msgstr "No se pudo abrir el archivo “%s”"
792 #: ../src/printing.cc:738
795 msgid "Couldn’t write file “%s”"
796 msgstr "No se pudo escribir en el archivo “%s”"
798 #. TRANSLATORS: If you're unsure what "deprecated" means, see:
799 #. https://en.wikipedia.org/wiki/Deprecation
800 #: ../src/commands.c:517
801 #: ../src/commands.c:622
802 #: ../src/commands.c:646
803 #: ../src/commands.c:1295
804 #: ../src/commands.c:1722
805 #: ../src/readval.c:92
807 msgid "Further uses of this deprecated feature will not be reported"
808 msgstr "Usos futuros de ésta función obsoleta no serán informados"
810 #. TRANSLATORS: %s is replaced by the amount the readings disagree
811 #. by, e.g. "0.12m" or "0.2ft".
812 #: ../src/datain.c:1798
813 #: ../src/datain.c:1919
816 msgid "TAPE reading and BACKTAPE reading disagree by %s"
817 msgstr "Las lecturas de TAPE y BACKTAPE difieren de %s"
819 #. TRANSLATORS: %s is replaced by the amount the readings disagree
820 #. by, e.g. "2.5°" or "3ᵍ".
821 #: ../src/datain.c:1014
824 msgid "COMPASS reading and BACKCOMPASS reading disagree by %s"
825 msgstr "Las lecturas de COMPASS y BACKCOMPASS difieren de %s"
827 #. TRANSLATORS: %s is replaced by the amount the readings disagree
828 #. by, e.g. "2.5°" or "3ᵍ".
829 #: ../src/datain.c:1202
832 msgid "CLINO reading and BACKCLINO reading disagree by %s"
833 msgstr "Las lecturas de CLINO y BACKCLINO difieren de %s"
835 #: ../src/commands.c:1292
838 msgid "“*data %s %c …” is deprecated - use “*data %s …” instead"
839 msgstr "“*data %s %c …” obsoleto - usa “*data %s …” en su lugar"
841 #. TRANSLATORS: Perhaps the user tried to load a different type of file as
842 #. a Survex .3d file, or the .3d file was corrupted.
843 #: ../src/3dtopos.c:157
844 #: ../src/3dtopos.c:163
845 #: ../src/cad3d.c:909
846 #: ../src/cad3d.c:920
847 #: ../src/img_hosted.c:38
850 msgid "Bad 3d image file “%s”"
851 msgstr "Archivo de imagen 3d “%s” erróneo"
853 #. TRANSLATORS: This is the date format string used to timestamp .3d
854 #. files internally. Probably best to keep it the same for all
857 #: ../src/mainfrm.cc:1476
860 msgid "%a,%Y.%m.%d %H:%M:%S %Z"
861 msgstr "%a,%Y.%m.%d %H:%M:%S %Z"
863 #. TRANSLATORS: used a processed survey with no processing date/time info
864 #: ../src/mainfrm.cc:1469
866 msgid "Date and time not available."
867 msgstr "Fecha y hora no disponibles."
869 #: ../src/img_hosted.c:40
872 msgid "Error reading from file “%s”"
873 msgstr "Error al leer el archivo “%s”"
875 #: ../src/cavernlog.cc:836
876 #: ../src/filename.c:79
877 #: ../src/img_hosted.c:41
878 #: ../src/mainfrm.cc:386
879 #: ../src/mainfrm.cc:2064
882 msgid "Error writing to file “%s”"
883 msgstr "Error escribiendo en el archivo “%s”"
885 #: ../src/filename.c:82
887 msgid "Error writing to file"
888 msgstr "Error escribiendo en archivo"
890 #: ../src/cavern.c:379
893 msgid "There were %d warning(s) and %d error(s) - no output files produced."
894 msgstr "Havia %d alerta(s) y %d error(es) - no se generaron archivos de salida."
896 #: ../src/img_hosted.c:42
899 msgid "File “%s” has a newer format than this program can understand"
900 msgstr "El archivo “%s” tiene un formato mas nuevo del que éste programa puede entender"
902 #: ../src/printing.cc:1219
907 #. TRANSLATORS: "Elevation on" 020 <-> 200 degrees
908 #: ../src/printing.cc:1244
913 #: ../src/printing.cc:515
918 #: ../src/printing.cc:517
923 #. TRANSLATORS: Label used for "clino" in Aven when the view is
924 #. neither from directly above nor from directly below. It is
925 #. also used in the dialog for editing a marked position in a
928 #. Try to keep this translation short - ideally at most 10
929 #. characters - as otherwise the compass and clino will be moved
930 #. further apart to make room. */
931 #: ../src/gfxcore.cc:902
932 #: ../src/gfxcore.cc:1946
933 #: ../src/mainfrm.cc:173
938 #. TRANSLATORS: Label used for "clino" in Aven when the view is
939 #. from directly above.
941 #. Try to keep this translation short - ideally at most 10
942 #. characters - as otherwise the compass and clino will be moved
943 #. further apart to make room. */
944 #: ../src/gfxcore.cc:802
945 #: ../src/gfxcore.cc:1940
950 #. TRANSLATORS: Label used for "clino" in Aven when the view is
951 #. from directly below.
953 #. Try to keep this translation short - ideally at most 10
954 #. characters - as otherwise the compass and clino will be moved
955 #. further apart to make room. */
956 #: ../src/gfxcore.cc:816
957 #: ../src/gfxcore.cc:1943
962 #: ../src/cavern.c:343
964 msgid "Calculating statistics"
965 msgstr "Calculando estadísticas"
967 #: ../src/readval.c:504
969 msgid "Expecting string field"
970 msgstr "Esperando una cadena de carácteres"
972 #: ../src/cmdline.c:212
974 msgid "too few arguments"
975 msgstr "Faltan argumentos"
977 #: ../src/cmdline.c:219
979 msgid "too many arguments"
980 msgstr "Sobran argumentos"
982 #: ../src/cmdline.c:178
983 #: ../src/cmdline.c:181
984 #: ../src/cmdline.c:185
989 #. TRANSLATORS: In French, Eric chose to use the terminology used by
990 #. toporobot: "sequence" for the English "traverse", which makes sense
991 #. (although toporobot actually uses this term to mean something more
992 #. specific). Feel free to follow this lead if you can't think of a better
993 #. term - these messages mostly indicate how processing is progressing.
995 #. A trailing traverse is a dead end back to a junction.
996 #: ../src/netskel.c:180
998 msgid "Removing trailing traverses"
999 msgstr "Borrando las secuencias terminales"
1001 #. TRANSLATORS: In French, Eric chose to use the terminology used by
1002 #. toporobot: "sequence" for the English "traverse", which makes sense
1003 #. (although toporobot actually uses this term to mean something more
1004 #. specific). Feel free to follow this lead if you can't think of a better
1005 #. term - these messages mostly indicate how processing is progressing.
1006 #: ../src/netskel.c:239
1008 msgid "Concatenating traverses"
1009 msgstr "Conectando secuencias"
1011 #. TRANSLATORS: In French, Eric chose to use the terminology used by
1012 #. toporobot: "sequence" for the English "traverse", which makes sense
1013 #. (although toporobot actually uses this term to mean something more
1014 #. specific). Feel free to follow this lead if you can't think of a better
1015 #. term - these messages mostly indicate how processing is progressing.
1016 #: ../src/netskel.c:437
1018 msgid "Calculating traverses"
1019 msgstr "Calculando secuencias"
1021 #. TRANSLATORS: In French, Eric chose to use the terminology used by
1022 #. toporobot: "sequence" for the English "traverse", which makes sense
1023 #. (although toporobot actually uses this term to mean something more
1024 #. specific). Feel free to follow this lead if you can't think of a better
1025 #. term - these messages mostly indicate how processing is progressing.
1027 #. A trailing traverse is a dead end back to a junction.
1028 #: ../src/netskel.c:782
1030 msgid "Calculating trailing traverses"
1031 msgstr "Calculando las secuencias terminales"
1033 #: ../src/network.c:82
1035 msgid "Simplifying network"
1036 msgstr "Simplificando la red"
1038 #: ../src/network.c:540
1040 msgid "Calculating network"
1041 msgstr "Calculando la red"
1043 #: ../src/datain.c:1619
1046 msgid "Found “%s”, expecting “F” or “B”"
1047 msgstr "Encontrado “%s”, esperando “F” o “B”"
1049 #: ../src/cavern.c:445
1052 msgid "Total length of survey legs = %7.2f%s (%7.2f%s adjusted)"
1053 msgstr "Longitud total de las tiradas de topografia = %7.2f%s (%7.2f%s corregido)"
1055 #: ../src/cavern.c:448
1058 msgid "Total plan length of survey legs = %7.2f%s"
1059 msgstr "Longitud total en proyección horizontal = %7.2f%s"
1061 #: ../src/cavern.c:451
1064 msgid "Total vertical length of survey legs = %7.2f%s"
1065 msgstr "Longitud vertical total de las tiradas de topografia = %7.2f%s"
1067 #. TRANSLATORS: numbers are altitudes of highest and lowest stations
1068 #: ../src/cavern.c:458
1071 msgid "Vertical range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
1072 msgstr "Desnivel total = %4.2f%s (desde %s en %4.2f%s a %s en %4.2f%s)"
1074 #. TRANSLATORS: c.f. previous message
1075 #: ../src/cavern.c:461
1078 msgid "North-South range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
1079 msgstr "Extensión Norte-Sur = %4.2f%s (desde %s en %4.2f%s a %s en %4.2f%s)"
1081 #. TRANSLATORS: c.f. previous two messages
1082 #: ../src/cavern.c:464
1085 msgid "East-West range = %4.2f%s (from %s at %4.2f%s to %s at %4.2f%s)"
1086 msgstr "Extensión Este-Oeste = %4.2f%s (desde %s en %4.2f%s a %s en %4.2f%s)"
1088 #: ../src/cavern.c:430
1090 msgid "There is 1 loop."
1091 msgstr "Hay 1 bucle."
1093 #: ../src/cavern.c:432
1096 msgid "There are %ld loops."
1097 msgstr "Hay %ld bucles."
1099 #: ../src/cavern.c:365
1102 msgid "CPU time used %5.2fs"
1103 msgstr "Tiempo de CPU utilizado %5.2fs"
1105 #: ../src/cavern.c:368
1108 msgid "Time used %5.2fs"
1109 msgstr "Tiempo utilizado %5.2fs"
1111 #: ../src/cavern.c:370
1113 msgid "Time used unavailable"
1114 msgstr "Tiempo utilizado no disponible"
1116 #: ../src/cavern.c:373
1119 msgid "Time used %5.2fs (%5.2fs CPU time)"
1120 msgstr "Tiempo utilizado %5.2fs (%5.2fs tiempo CPU)"
1122 #: ../src/netskel.c:747
1125 msgid "Original length %6.2fm (%3d legs), moved %6.2fm (%5.2fm/leg). "
1126 msgstr "Longitud original %6.2fm (%3d tiradas), reducidos %6.2fm (%5.2fm/tirada). "
1128 #: ../src/netskel.c:750
1131 msgid "Error %6.2f%%"
1132 msgstr "Error %6.2f%%"
1134 #. TRANSLATORS: Here N/A means "Not Applicable" -- it means the
1135 #. traverse has zero length, so error per metre is meaningless.
1137 #. There should be 4 spaces between "Error" and "N/A" so that it lines
1138 #. up with the numbers in the message above.
1139 #: ../src/netskel.c:757
1144 #. TRANSLATORS: description of --help option
1145 #: ../src/cmdline.c:138
1147 msgid "display this help and exit"
1148 msgstr "muestra esta ayuda y sale"
1150 #. TRANSLATORS: description of --version option
1151 #: ../src/cmdline.c:141
1153 msgid "output version information and exit"
1154 msgstr "muestra información de la versión y sale"
1156 #. TRANSLATORS: in command line usage messages e.g. Usage: cavern [OPTION]…
1157 #: ../src/cmdline.c:170
1162 #: ../src/mainfrm.cc:177
1163 #: ../src/printing.cc:450
1164 #: ../src/printing.cc:1281
1165 #: ../src/printing.cc:1330
1170 #: ../src/cmdline.c:194
1173 msgid "Try “%s --help” for more information.\n"
1174 msgstr "Prueba “%s --help” para más información.\n"
1176 #. TRANSLATORS: N/M meaning page N of M in the page footer of a printout.
1177 #: ../src/printing.cc:1984
1183 #. TRANSLATORS: Used in the footer of printouts to compactly indicate that
1184 #. the date which follows is the date that the survey data was processed.
1186 #. Aven will replace %s with a string giving the date and time (e.g.
1187 #. "2015-06-09 12:40:44").
1188 #: ../src/printing.cc:2025
1191 msgid "Processed: %s"
1192 msgstr "Procesada en %s"
1194 #. TRANSLATORS: Used in the footer of printouts to compactly
1195 #. indicate this is a plan view and what the viewing angle is.
1196 #. Aven will replace %s with the bearing, and %.0f with the scale.
1198 #. This message probably doesn't need translating for most languages.
1199 #: ../src/printing.cc:1939
1205 #. TRANSLATORS: Used in the footer of printouts to compactly
1206 #. indicate this is an elevation view and what the viewing angle
1207 #. is. Aven will replace the %s codes with the bearings to the
1208 #. left and right of the viewer, and %.0f with the scale.
1210 #. This message probably doesn't need translating for most languages.
1211 #: ../src/printing.cc:1950
1214 msgid "%s↔%s 1:%.0f"
1217 #. TRANSLATORS: Used in the footer of printouts to compactly
1218 #. indicate this is a tilted elevation view and what the viewing
1219 #. angles are. Aven will replace the %s codes with the bearings to
1220 #. the left and right of the viewer and the angle the view is
1221 #. tilted at, and %.0f with the scale.
1223 #. This message probably doesn't need translating for most languages.
1224 #: ../src/printing.cc:1963
1227 msgid "%s↔%s ∡%s 1:%.0f"
1230 #. TRANSLATORS: Used in the footer of printouts to compactly
1231 #. indicate this is an extended elevation view. Aven will replace
1232 #. %.0f with the scale.
1234 #. Try to keep the translation short (for example, in English we
1235 #. use "Extended" not "Extended elevation") - there is limited room
1236 #. in the footer, and the details there are mostly to make it easy
1237 #. to check that you have corresponding pages from a multiple page
1239 #: ../src/printing.cc:1979
1242 msgid "Extended 1:%.0f"
1245 #. TRANSLATORS: This is used on printouts of plans, with %s replaced by
1246 #. something like "123°". The bearing is up the page.
1247 #: ../src/printing.cc:1225
1250 msgid "Plan view, %s up page"
1253 #. TRANSLATORS: This is used on printouts of elevations, with %s
1254 #. replaced by something like "123°". The bearing is the direction
1256 #: ../src/printing.cc:1257
1259 msgid "Elevation facing %s"
1262 #. TRANSLATORS: This is used on printouts of tilted elevations, with
1263 #. the first %s replaced by something like "123°", and the second by
1264 #. something like "-45°". The bearing is the direction we’re
1266 #: ../src/printing.cc:1264
1269 msgid "Elevation facing %s, tilted %s"
1272 #. TRANSLATORS: This is used on printouts of extended elevations.
1273 #: ../src/printing.cc:1273
1275 msgid "Extended elevation"
1276 msgstr "Alzado desarrollado"
1278 #: ../src/cavern.c:416
1280 msgid "Survey contains 1 survey station,"
1281 msgstr "La topografia contiene 1 estación,"
1283 #: ../src/cavern.c:418
1286 msgid "Survey contains %ld survey stations,"
1287 msgstr "La topografia contiene %ld estaciones,"
1289 #: ../src/cavern.c:422
1291 msgid " joined by 1 leg."
1292 msgstr " unidas por 1 tirada."
1294 #: ../src/cavern.c:424
1297 msgid " joined by %ld legs."
1298 msgstr " unidas por %ld tiradas."
1300 #. TRANSLATORS: node/nodes as in: "Survey has 1 2-node and 2 3-nodes."
1301 #: ../src/listpos.c:185
1306 #. TRANSLATORS: node/nodes as in: "Survey has 1 2-node and 2 3-nodes."
1307 #: ../src/listpos.c:187
1312 #. TRANSLATORS: "Connected component" in the graph theory sense - it
1313 #. means there are %ld bits of survey with no connections between them.
1314 #. This message is only used if there are more than 1.
1315 #: ../src/cavern.c:441
1318 msgid "Survey has %ld connected components."
1319 msgstr "La topografia contiene %ld componentes conectados."
1321 #. TRANSLATORS: Label for button in aven’s cavern log window which
1322 #. allows the user to save the log to a file.
1323 #: ../src/cavernlog.cc:767
1326 msgstr "Guardar Registro"
1328 #. TRANSLATORS: Label for button in aven’s cavern log window which
1329 #. causes the survey data to be reprocessed.
1330 #: ../src/cavernlog.cc:777
1331 #: ../src/cavernlog.cc:782
1336 #: ../src/cmdline.c:242
1337 #: ../src/cmdline.c:261
1340 msgid "numeric argument “%s” out of range"
1341 msgstr "argumento numérico “%s” fuera de rango"
1343 #: ../src/cmdline.c:244
1346 msgid "argument “%s” not an integer"
1347 msgstr "El argumento “%s” no es un entero"
1349 #: ../src/cmdline.c:263
1352 msgid "argument “%s” not a number"
1353 msgstr "El argumento “%s” no es un número"
1355 #: ../src/commands.c:1029
1357 msgid "Expecting “DUPLICATE”, “SPLAY”, or “SURFACE”"
1358 msgstr "Esperando “DUPLICATE”, “SPLAY”, o “SURFACE”"
1360 #: ../src/commands.c:1031
1362 msgid "Expecting “NOT”, “DUPLICATE”, “SPLAY”, or “SURFACE”"
1363 msgstr "Esperando “NOT”, “DUPLICATE”, “SPLAY”, o “SURFACE”"
1365 #: ../src/listpos.c:82
1368 msgid "Station “%s” referred to by *entrance or *export but never used"
1369 msgstr "La estación “%s” ha sido referenciada por *entrance o *export pero no se ha usado nunca"
1371 #: ../src/commands.c:736
1373 msgid "No matching BEGIN"
1374 msgstr "Falta el BEGIN correspondiente"
1376 #. TRANSLATORS: *BEGIN <survey> and *END <survey> should have the
1377 #. same <survey> if it’s given at all
1378 #: ../src/commands.c:772
1381 msgid "Survey name doesn’t match BEGIN"
1382 msgstr "El prefijo no se corresponde con el de BEGIN"
1384 #. TRANSLATORS: Used when a BEGIN command has a survey name, but the
1385 #. END command omits it, e.g.:
1388 #. 1 2 10.00 178 -01
1389 #. *end <--[Message given here]
1390 #: ../src/commands.c:782
1393 msgid "Survey name omitted from END"
1394 msgstr "Prefijo omitido en END"
1396 #. TRANSLATORS: Heading line for .pos file. Please try to ensure the “,”s
1397 #. (or at least the columns) are in the same place
1398 #: ../src/3dtopos.c:112
1401 msgid "( Easting, Northing, Altitude )"
1402 msgstr "( Este X , Norte Y , Altitud Z)"
1404 #. TRANSLATORS: bpp is "Bits Per Pixel"
1405 #: ../src/aboutdlg.cc:180
1408 msgid "Display Depth: %d bpp"
1411 #. TRANSLATORS: appended to previous message if the display is colour
1412 #: ../src/aboutdlg.cc:182
1417 #: ../src/readval.c:527
1418 #: ../src/readval.c:540
1419 #: ../src/readval.c:550
1422 msgid "Expecting date, found “%s”"
1423 msgstr "Esperando dato, encontrado “%s”"
1425 #. TRANSLATORS: --help output for --survey option.
1427 #. "this" has been added to English translation
1428 #: ../src/3dtopos.c:50
1429 #: ../src/aven.cc:73
1430 #: ../src/cad3d.c:660
1431 #: ../src/diffpos.c:57
1432 #: ../src/dump3d.c:49
1433 #: ../src/extend.c:473
1435 msgid "only load the sub-survey with this prefix"
1436 msgstr "solo carga la sub-topografía con prefijo"
1438 #. TRANSLATORS: --help output for aven --print option
1439 #: ../src/aven.cc:75
1441 msgid "print and exit (requires a 3d file)"
1444 #. TRANSLATORS: --help output for cavern --output option
1445 #: ../src/cavern.c:119
1447 msgid "set location for output files"
1450 #. TRANSLATORS: --help output for cavern --quiet option
1451 #: ../src/cavern.c:121
1453 msgid "only show brief summary (-qq for errors only)"
1456 #. TRANSLATORS: --help output for cavern --no-auxiliary-files option
1457 #: ../src/cavern.c:123
1459 msgid "do not create .err file"
1462 #. TRANSLATORS: --help output for cavern --warnings-are-errors option
1463 #: ../src/cavern.c:125
1465 msgid "turn warnings into errors"
1468 #. TRANSLATORS: --help output for cavern --log option
1469 #: ../src/cavern.c:127
1471 msgid "log output to .log file"
1474 #. TRANSLATORS: --help output for cavern --3d-version option
1475 #: ../src/cavern.c:129
1477 msgid "specify the 3d file format version to output"
1480 #. TRANSLATORS: --help output for extend --specfile option
1481 #: ../src/extend.c:475
1483 msgid ".espec file to control extending"
1486 #. TRANSLATORS: --help output for extend --show-breaks option
1487 #: ../src/extend.c:477
1489 msgid "show breaks with surface survey legs in output"
1492 #. TRANSLATORS: error message given by "*units tape 0 feet" - it’s
1493 #. meaningless to say your tape is marked in "0 feet" (but you might
1494 #. measure distance by counting knots on a diving line, and tie them
1496 #: ../src/commands.c:1551
1498 msgid "*UNITS factor must be non-zero"
1499 msgstr "El factor de *UNITS debe de ser diferente de cero"
1501 #: ../src/mainfrm.cc:1486
1504 msgid "No survey data in 3d file “%s”"
1505 msgstr "No hay datos topográficos en el archivo 3d “%s”"
1507 #. TRANSLATORS: Used in aven above the compass indicator at the lower
1508 #. right of the display, with a bearing below "Facing". This indicates the
1509 #. direction the viewer is "facing" in.
1511 #. Try to keep this translation short - ideally at most 10 characters -
1512 #. as otherwise the compass and clino will be moved further apart to
1514 #: ../src/gfxcore.cc:788
1515 #: ../src/gfxcore.cc:1927
1520 #. TRANSLATORS: for the title of the About box
1521 #: ../src/aboutdlg.cc:62
1525 msgstr "Acerca de %s"
1527 #. TRANSLATORS: "Terrain file" being a digital model of the terrain (e.g. a
1528 #. grid of height values).
1529 #: ../src/mainfrm.cc:2018
1531 msgid "Select a terrain file to view"
1532 msgstr "Selecciona un archivo de terreno para ver"
1534 #: ../src/mainfrm.cc:2012
1536 msgid "Terrain files"
1537 msgstr "Archivos de terreno"
1539 #. TRANSLATORS: Aven shows a circle of terrain covering the area
1540 #. of the survey plus a bit, but the terrain data file didn't
1541 #. contain any data inside that circle.
1542 #: ../src/gfxcore.cc:2954
1544 msgid "No terrain data near area of survey"
1547 #. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1548 #. - it should be translated to the terminology that cavers using the
1549 #. language would use.
1551 #. File->Open dialog:
1552 #: ../src/mainfrm.cc:1989
1555 msgid "Select a survey file to view"
1556 msgstr "Selecciona un archivo 3d para visualizar"
1558 #. TRANSLATORS: Survex is the name of the software, and "3d" refers to a
1559 #. file extension, so neither should be translated.
1560 #: ../src/mainfrm.cc:1966
1561 #: ../src/mainfrm.cc:2119
1563 msgid "Survex 3d files"
1564 msgstr "Archivos Survex 3d"
1566 #: ../src/mainfrm.cc:1981
1567 #: ../src/mainfrm.cc:2013
1568 #: ../src/mainfrm.cc:2511
1569 #: ../src/printing.cc:716
1572 msgstr "Todos los archivos"
1574 #. TRANSLATORS: Here "survey" is a "cave map" rather than
1575 #. list of questions - it should be translated to the
1576 #. terminology that cavers using the language would use.
1577 #: ../src/mainfrm.cc:1963
1579 msgid "All survey files"
1582 #. TRANSLATORS: Survex is the name of the software, and "svx" refers to a
1583 #. file extension, so neither should be translated.
1584 #: ../src/mainfrm.cc:1969
1586 msgid "Survex svx files"
1587 msgstr "Archivos Survex svx"
1589 #. TRANSLATORS: "Compass" as in Larry Fish’s cave
1590 #. surveying package, so should not be translated
1591 #: ../src/mainfrm.cc:1977
1593 msgid "Compass DAT and MAK files"
1596 #: ../src/printing.cc:319
1599 msgstr "Archivos DXF"
1601 #: ../src/printing.cc:320
1604 msgstr "Archivos EPS"
1606 #: ../src/printing.cc:321
1609 msgstr "Archivos GPX"
1611 #. TRANSLATORS: Here "plotter" refers to a machine which draws a printout
1612 #. on a (usually large) sheet of paper using a pen mounted in a motorised
1614 #: ../src/printing.cc:325
1616 msgid "HPGL for plotters"
1619 #: ../src/printing.cc:327
1622 msgstr "Archivos KML"
1624 #. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
1625 #. so should not be translated:
1626 #. http://www.fountainware.com/compass/
1627 #. http://www.psc-cavers.org/carto/
1628 #: ../src/printing.cc:332
1630 msgid "Compass PLT for use with Carto"
1633 #. TRANSLATORS: "Skencil" is the name of a software package, so should not be
1634 #. translated: http://www.skencil.org/
1635 #: ../src/printing.cc:335
1637 msgid "Skencil files"
1638 msgstr "Archivos Skencil"
1640 #. TRANSLATORS: Survex is the name of the software, and "pos" refers to a
1641 #. file extension, so neither should be translated.
1642 #: ../src/printing.cc:338
1644 msgid "Survex pos files"
1645 msgstr "Archivos Survex pos"
1647 #: ../src/printing.cc:339
1650 msgstr "Archivos SVG"
1652 #: ../src/printing.cc:326
1655 msgstr "Archivos JSON"
1657 #. TRANSLATORS: Log files from running cavern (extension .log)
1658 #: ../src/cavernlog.cc:826
1661 msgstr "Archivos de registro"
1663 #. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1664 #. - it should be translated to the terminology that cavers using the
1665 #. language would use.
1667 #. This string is used in the about box (summarising the purpose of aven).
1668 #: ../src/aboutdlg.cc:90
1670 msgid "Survey visualisation tool"
1671 msgstr "Herramienta para visualizar topografias"
1673 #. TRANSLATORS: Summary paragraph for the GPLv2 - there are translations for
1674 #. some languages here:
1675 #. https://www.gnu.org/licenses/old-licenses/gpl-2.0-translations.html
1676 #: ../src/aboutdlg.cc:104
1678 msgid "This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version."
1679 msgstr "Este programa es software libre. Puede redistribuirlo y/o modificarlo bajo los términos de la Licencia Pública General de GNU según es publicada por la Free Software Foundation, bien de la versió 2 de dicha Licencia o bien (según su elección) de cualquier versión posterior."
1681 #. TRANSLATORS: Part of 3dtopos --help
1682 #: ../src/3dtopos.c:86
1684 msgid "3D_FILE [POS_FILE]"
1685 msgstr "ARCHIVO_3D [ARCHIVO_POS]"
1687 #. TRANSLATORS: Part of diffpos --help
1688 #: ../src/diffpos.c:265
1690 msgid "FILE1 FILE2 [THRESHOLD]"
1691 msgstr "ARCHIVO1 ARCHIVO2 [LÍMITE]"
1693 #. TRANSLATORS: Part of diffpos --help
1694 #: ../src/diffpos.c:267
1697 msgid "FILE1 and FILE2 can be .pos or .3d files\nTHRESHOLD is the max. ignorable change along any axis in metres (default %s)"
1698 msgstr "ARCHIVO1 and ARCHIVO2 can be .pos or .3d files\nLÍMITE is the max. ignorable change along any axis in metres (default %s)"
1700 #. TRANSLATORS: Part of extend --help
1701 #: ../src/extend.c:546
1703 msgid "INPUT_3D_FILE [OUTPUT_3D_FILE]"
1706 #. TRANSLATORS: Part of sorterr --help
1707 #: ../src/sorterr.c:127
1709 msgid "ERR_FILE [HOW_MANY]"
1712 #. TRANSLATORS: Here "survey" is a "cave map" rather than list of questions
1713 #. - it should be translated to the terminology that cavers using the
1714 #. language would use.
1716 #. Part of aven --help
1717 #: ../src/aven.cc:173
1718 #: ../src/aven.cc:203
1720 msgid "[SURVEY_FILE]"
1723 #. TRANSLATORS: Used in the "colour key" for "colour by date" if there
1724 #. are surveys without date information. Try to keep this fairly short.
1725 #: ../src/gfxcore.cc:1148
1730 #. TRANSLATORS: Used in the "colour key" for "colour by error" for surveys
1731 #. which aren’t part of a loop and so have no error information. Try to keep
1732 #. this fairly short.
1733 #: ../src/gfxcore.cc:1173
1738 #. TRANSLATORS: error from:
1740 #. *data normal newline from to tape compass clino
1741 #: ../src/commands.c:1393
1743 msgid "NEWLINE can’t be the first reading"
1744 msgstr "NEWLINE no puede ser el primer campo"
1746 #. TRANSLATORS: error from:
1748 #. *data normal from to tape compass clino newline
1749 #: ../src/commands.c:1434
1751 msgid "NEWLINE can’t be the last reading"
1752 msgstr "NEWLINE no puede ser el último campo"
1754 #. TRANSLATORS: Error given by something like:
1756 #. *data normal station tape compass clino
1758 #. ("station" signifies interleaved data).
1759 #: ../src/commands.c:1457
1761 msgid "Interleaved readings, but no NEWLINE"
1762 msgstr "Campos en más de una linea, pero sin NEWLINE"
1764 #. TRANSLATORS: caused by e.g.
1766 #. *data diving station newline depth tape compass
1768 #. ("depth" needs to occur before "newline").
1769 #: ../src/commands.c:1333
1772 msgid "Reading “%s” must occur before NEWLINE"
1773 msgstr "El campo “%s” tiene que preceder a NEWLINE"
1775 #. TRANSLATORS: e.g.
1777 #. *data normal from to tape newline compass clino
1778 #: ../src/commands.c:1384
1780 msgid "NEWLINE can only be preceded by STATION, DEPTH, and COUNT"
1781 msgstr "NEWLINE solo puede ser precedido por STATION, DEPTH, y COUNT"
1783 #. TRANSLATORS: e.g.
1785 #. *calibrate tape compass 1 1
1786 #: ../src/commands.c:1594
1788 msgid "Can’t calibrate angular and length quantities together"
1789 msgstr "No se pueden calibrar cantidades angulares y de longitud juntas"
1791 #: ../src/commands.c:674
1793 msgid "Bad *alias command"
1796 #. TRANSLATORS: %s will be replaced by the application name ("Aven"
1801 msgid "%s Error Log"
1804 #. TRANSLATORS: The text on the action button in the "Export" settings
1806 #: ../src/printing.cc:659
1809 msgstr "&Exportar..."
1811 #. TRANSLATORS: "Rotation" menu. The accelerators must be different within
1812 #. this group. Tickable menu item which toggles auto rotation
1813 #: ../src/mainfrm.cc:830
1815 msgid "Au&to-Rotate\tSpace"
1816 msgstr "&Auto-Rotar\tSpace"
1818 #: ../src/mainfrm.cc:832
1820 msgid "&Reverse Direction"
1821 msgstr "&Invierte el sentido"
1823 #. TRANSLATORS: View *looking* North
1824 #: ../src/gfxcore.cc:3993
1825 #: ../src/mainfrm.cc:835
1828 msgstr "Vista hacia el &Norte"
1830 #. TRANSLATORS: View *looking* East
1831 #: ../src/gfxcore.cc:3995
1832 #: ../src/mainfrm.cc:836
1835 msgstr "Vista hacia el &Este"
1837 #. TRANSLATORS: View *looking* South
1838 #: ../src/gfxcore.cc:3997
1839 #: ../src/mainfrm.cc:837
1842 msgstr "Vista hacia el &Sur"
1844 #. TRANSLATORS: View *looking* West
1845 #: ../src/gfxcore.cc:3999
1846 #: ../src/mainfrm.cc:838
1849 msgstr "Vista hacia el &Oeste"
1851 #: ../src/gfxcore.cc:4016
1852 #: ../src/mainfrm.cc:840
1857 #: ../src/gfxcore.cc:4017
1858 #: ../src/mainfrm.cc:841
1863 #: ../src/mainfrm.cc:843
1865 msgid "Restore De&fault View"
1866 msgstr "Restaurar la &vista predeterminada"
1868 #. TRANSLATORS: Used as a label for the surrounding box for the "Bearing"
1869 #. and "Tilt angle" fields, and the "Plan view" and "Elevation" buttons in
1870 #. the "what to print/export" dialog.
1871 #: ../src/printing.cc:414
1876 #. TRANSLATORS: Used as a label for the surrounding box for the "survey
1877 #. legs" "stations" "names" etc checkboxes in the "what to print" dialog.
1878 #. "Elements" isn’t a good name for this but nothing better has yet come to
1880 #: ../src/printing.cc:419
1885 #: ../src/printing.cc:425
1887 msgid "Export format"
1888 msgstr "Formato de exportación"
1890 #: ../src/printing.cc:483
1891 #: ../src/printing.cc:889
1894 msgid "%d pages (%dx%d)"
1895 msgstr "%d páginas (%dx%d)"
1897 #. TRANSLATORS: used in the scale drop down selector in the print
1898 #. dialog the implicit meaning is "choose a suitable scale to fit
1899 #. the plot on a single page", but we need something shorter
1900 #: ../src/printing.cc:455
1905 #: ../src/mainfrm.cc:169
1906 #: ../src/printing.cc:496
1911 #: ../src/printing.cc:543
1913 msgid "Station Names"
1914 msgstr "Nombres de estación"
1916 #: ../src/printing.cc:539
1921 #. TRANSLATORS: Here a "survey leg" is a set of measurements between two
1922 #. "survey stations".
1923 #: ../src/printing.cc:525
1925 msgid "Underground Survey Legs"
1926 msgstr "Tiradas Subterráneas"
1928 #: ../src/printing.cc:559
1930 msgid "Cross-sections"
1931 msgstr "Seccións transversals"
1933 #: ../src/printing.cc:564
1938 #. TRANSLATORS: Label for checkbox which controls whether there's a
1939 #. layer in the exported file (for formats such as DXF and SVG)
1940 #. containing polygons for the inside of cave passages).
1941 #: ../src/printing.cc:571
1946 #: ../src/printing.cc:575
1948 msgid "Origin in centre"
1951 #: ../src/printing.cc:579
1953 msgid "Full coordinates"
1956 #. TRANSLATORS: Used in the print dialog:
1957 #: ../src/printing.cc:505
1960 msgstr "Angulo de inclinación"
1962 #. TRANSLATORS: used in the print dialog - controls drawing lines
1964 #: ../src/printing.cc:587
1966 msgid "Page Borders"
1967 msgstr "Marcos de la página"
1969 #. TRANSLATORS: As in the legend on a map. Used in the print dialog -
1970 #. controls drawing the box at the lower left with survey name, view
1972 #: ../src/printing.cc:598
1977 #. TRANSLATORS: will be used in the print dialog - check this to print
1978 #. blank pages (otherwise they’ll be skipped to save paper)
1979 #: ../src/printing.cc:593
1982 msgstr "Páginas en blanco"
1984 #. TRANSLATORS: Items in the "View" menu:
1985 #: ../src/mainfrm.cc:860
1987 msgid "Station &Names\tCtrl+N"
1988 msgstr "&Nombres de estación\tCtrl+N"
1990 #. TRANSLATORS: Toggles drawing of 3D passages
1991 #: ../src/mainfrm.cc:862
1993 msgid "Passage &Tubes\tCtrl+T"
1994 msgstr "&Galerias Tubulares\tCtrl+T"
1996 #. TRANSLATORS: Toggles drawing the surface of the Earth
1997 #: ../src/mainfrm.cc:864
2003 #: ../src/mainfrm.cc:865
2005 msgid "&Crosses\tCtrl+X"
2006 msgstr "&Cruces\tCtrl+X"
2008 #: ../src/mainfrm.cc:866
2010 msgid "&Grid\tCtrl+G"
2011 msgstr "Re&jilla\tCtrl+G"
2013 #: ../src/mainfrm.cc:867
2015 msgid "&Bounding Box\tCtrl+B"
2016 msgstr "&Bordes del Cuadro\tCtrl+B"
2018 #. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2019 #. "survey stations".
2020 #: ../src/mainfrm.cc:871
2022 msgid "&Underground Survey Legs\tCtrl+L"
2023 msgstr "&Tiradas Subterráneas\tCtrl+L"
2025 #. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2026 #. "survey stations".
2027 #: ../src/mainfrm.cc:874
2029 msgid "&Surface Survey Legs\tCtrl+F"
2030 msgstr "Tiradas de t&opografia de superficie\tCtrl+F"
2032 #: ../src/mainfrm.cc:899
2034 msgid "&Overlapping Names"
2035 msgstr "Nombres &Superpuestos"
2037 #: ../src/mainfrm.cc:908
2042 #: ../src/mainfrm.cc:911
2044 msgid "Highlight &Entrances"
2045 msgstr "Marca las &Entradas"
2047 #: ../src/mainfrm.cc:912
2049 msgid "Highlight &Fixed Points"
2050 msgstr "Marca los Puntos f&ijados"
2052 #: ../src/mainfrm.cc:913
2054 msgid "Highlight E&xported Points"
2055 msgstr "M&arca los Puntos Exportados"
2057 #: ../src/printing.cc:547
2062 #: ../src/printing.cc:551
2064 msgid "Fixed Points"
2065 msgstr "Puntos fijados"
2067 #: ../src/printing.cc:555
2069 msgid "Exported Stations"
2070 msgstr "Puntos Exportados"
2072 #: ../src/mainfrm.cc:918
2074 msgid "&Perspective"
2075 msgstr "Perspecti&va"
2077 #: ../src/mainfrm.cc:920
2079 msgid "Textured &Walls"
2080 msgstr "Paredes con te&xtura"
2082 #. TRANSLATORS: Toggles OpenGL "Depth Fogging" - feel free to translate
2083 #. using that term instead if it gives a better translation which most
2084 #. users will understand.
2085 #: ../src/mainfrm.cc:924
2087 msgid "Fade Distant Ob&jects"
2088 msgstr "&Desvanece los objetos lejanos"
2090 #. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2091 #. "survey stations".
2092 #: ../src/mainfrm.cc:927
2094 msgid "Smoot&hed Survey Legs"
2095 msgstr "Tiradas S&uavizadas"
2097 #: ../src/mainfrm.cc:933
2098 #: ../src/mainfrm.cc:940
2100 msgid "Full Screen &Mode\tF11"
2101 msgstr "&Modo Pantalla Completa\tF11"
2103 #: ../src/gfxcore.cc:4054
2104 #: ../src/mainfrm.cc:902
2106 msgid "Colour by &Depth"
2107 msgstr "Colorear por &Profundidad"
2109 #: ../src/gfxcore.cc:4055
2110 #: ../src/mainfrm.cc:903
2112 msgid "Colour by D&ate"
2113 msgstr "Colorear por &Fecha"
2115 #: ../src/gfxcore.cc:4056
2116 #: ../src/mainfrm.cc:904
2119 msgid "Colour by &Error"
2120 msgstr "Color por E&rror"
2122 #: ../src/gfxcore.cc:4057
2123 #: ../src/mainfrm.cc:905
2125 msgid "Colour by &Gradient"
2128 #: ../src/gfxcore.cc:4058
2129 #: ../src/mainfrm.cc:906
2131 msgid "Colour by &Length"
2135 msgid "Colour by &Survey"
2138 #: ../src/mainfrm.cc:968
2143 #: ../src/mainfrm.cc:969
2148 #. TRANSLATORS: The "Colour Key" is the thing in aven showing which colour
2149 #. corresponds to which depth, date, survey closure error, etc.
2150 #: ../src/mainfrm.cc:972
2155 #: ../src/mainfrm.cc:973
2158 msgstr "Barra de &Escala"
2160 #: ../src/mainfrm.cc:949
2162 msgid "&Reverse Sense\tCtrl+R"
2163 msgstr "&Invierte el sentido\tCtrl+R"
2165 #: ../src/mainfrm.cc:916
2166 #: ../src/mainfrm.cc:958
2167 #: ../src/mainfrm.cc:964
2169 msgid "&Cancel Measuring Line\tEscape"
2170 msgstr "&Cancela la linea de medida\tEscape"
2172 #: ../src/mainfrm.cc:974
2175 msgstr "I&ndicadores"
2177 #: ../src/z_getopt.c:712
2180 msgid "%s: option “%s” is ambiguous\n"
2181 msgstr "%s: la opción “%s” es ambigua\n"
2183 #: ../src/z_getopt.c:762
2186 msgid "%s: option “%c%s” doesn’t allow an argument\n"
2187 msgstr "%s: la opción “%c%s” no permite argumento\n"
2189 #: ../src/z_getopt.c:749
2192 msgid "%s: option “--%s” doesn’t allow an argument\n"
2193 msgstr "%s: la opción “--%s” no permite argumento\n"
2195 #: ../src/z_getopt.c:810
2198 msgid "%s: option “%s” requires an argument\n"
2199 msgstr "%s: la opción “%s” requiere un argumento\n"
2201 #: ../src/z_getopt.c:1182
2204 msgid "%s: option requires an argument -- %c\n"
2205 msgstr "%s: la opción requiere un argumento -- %c\n"
2207 #: ../src/z_getopt.c:851
2210 msgid "%s: unrecognized option “--%s”\n"
2211 msgstr "%s: opción “--%s” desconocida\n"
2213 #: ../src/z_getopt.c:862
2216 msgid "%s: unrecognized option “%c%s”\n"
2217 msgstr "%s: opción “%c%s” desconocida\n"
2219 #: ../src/z_getopt.c:923
2222 msgid "%s: invalid option -- %c\n"
2223 msgstr "%s: opción inválida -- %c\n"
2225 #: ../src/mainfrm.cc:846
2227 msgid "&New Presentation"
2228 msgstr "&Nueva Presentación"
2230 #: ../src/mainfrm.cc:847
2232 msgid "&Open Presentation..."
2233 msgstr "&Abrir Presentación..."
2235 #: ../src/mainfrm.cc:848
2237 msgid "&Save Presentation"
2238 msgstr "&Guardar la Presentació"
2240 #: ../src/mainfrm.cc:849
2242 msgid "Sa&ve Presentation As..."
2243 msgstr "Guardar la Presentació &Como..."
2245 #. TRANSLATORS: "Mark" as in "Mark this position"
2246 #: ../src/mainfrm.cc:852
2251 #. TRANSLATORS: "Play" as in "Play back a recording"
2252 #: ../src/mainfrm.cc:854
2257 #: ../src/mainfrm.cc:855
2259 msgid "&Export as Movie..."
2260 msgstr "&Exporta como Animación..."
2262 #: ../src/mainfrm.cc:2589
2264 msgid "Export Movie"
2265 msgstr "Exporta como Animación"
2267 #: ../src/cavernlog.cc:829
2268 #: ../src/mainfrm.cc:377
2269 #: ../src/mainfrm.cc:2122
2271 msgid "Select an output filename"
2272 msgstr "Selecciona un nombre de archivo de salida"
2274 #: ../src/mainfrm.cc:374
2275 #: ../src/mainfrm.cc:2510
2277 msgid "Aven presentations"
2278 msgstr "Presentaciones Aven"
2280 #. TRANSLATORS: title of the save screenshot dialog
2281 #: ../src/mainfrm.cc:2050
2283 msgid "Save Screenshot"
2284 msgstr "Guardar la captura de pantalla"
2286 #: ../src/mainfrm.cc:2505
2287 #: ../src/mainfrm.cc:2508
2289 msgid "Select a presentation to open"
2290 msgstr "Selecciona una presentación para abrir"
2292 #: ../src/mainfrm.cc:448
2295 msgid "Error in format of presentation file “%s”"
2296 msgstr "Error en el formato del archivo de presentación “%s”"
2298 #. TRANSLATORS: "Compass" as in Larry Fish’s cave
2299 #. surveying package, so probably shouldn’t be translated
2300 #: ../src/mainfrm.cc:1973
2302 msgid "Compass PLT files"
2303 msgstr "Archivos Compass PLT"
2305 #. TRANSLATORS: "CMAP" is Bob Thrun’s cave surveying
2306 #. package, so don’t translate it.
2307 #: ../src/mainfrm.cc:1980
2309 msgid "CMAP XYZ files"
2310 msgstr "Archivos CMAP XYZ"
2312 #. TRANSLATORS: title of message box
2313 #: ../src/mainfrm.cc:2159
2314 #: ../src/mainfrm.cc:2482
2315 #: ../src/mainfrm.cc:2499
2317 msgid "Modified Presentation"
2318 msgstr "Presentación Modificada"
2320 #. TRANSLATORS: and the question in that box
2321 #: ../src/mainfrm.cc:2157
2322 #: ../src/mainfrm.cc:2481
2323 #: ../src/mainfrm.cc:2498
2325 msgid "The current presentation has been modified. Abandon unsaved changes?"
2326 msgstr "La presentación actual ha sido modificada. Abandonar los cambios no guardados?"
2328 #: ../src/mainfrm.cc:2823
2329 #: ../src/mainfrm.cc:2834
2331 msgid "No matches were found."
2332 msgstr "Búsqueda infroctuosa."
2334 #. TRANSLATORS: "Find stations" button tooltip
2335 #: ../src/mainfrm.cc:1065
2340 #. TRANSLATORS: "Hide stations" button default tooltip
2341 #: ../src/mainfrm.cc:1067
2342 #: ../src/mainfrm.cc:2866
2347 #. TRANSLATORS: "Hide stations" button tooltip when stations are found
2348 #: ../src/mainfrm.cc:2827
2351 msgid "Hide %d found stations"
2354 #: ../src/mainfrm.cc:257
2355 #: ../src/mainfrm.cc:2247
2356 #: ../src/mainfrm.cc:2328
2357 #: ../src/mainfrm.cc:2380
2362 #. TRANSLATORS: error if you try to drag multiple files to the aven
2364 #: ../src/mainfrm.cc:726
2366 msgid "You may only view one 3d file at a time."
2367 msgstr "Solo se puede visualizar un archivo 3d a la vez."
2369 #: ../src/mainfrm.cc:975
2372 msgstr "&Panel Lateral"
2374 #. TRANSLATORS: show coordinates (N = North or Northing, E = East or
2376 #: ../src/mainfrm.cc:2245
2377 #: ../src/mainfrm.cc:2267
2378 #: ../src/mainfrm.cc:2269
2379 #: ../src/mainfrm.cc:2379
2382 msgid "%.2f E, %.2f N"
2383 msgstr "%.2f E, %.2f N"
2385 #. TRANSLATORS: Used in Aven:
2386 #. From <stationname>: H 12.24m, Brg 234.5°
2387 #: ../src/mainfrm.cc:2287
2388 #: ../src/mainfrm.cc:2337
2389 #: ../src/mainfrm.cc:2399
2395 #. TRANSLATORS: "H" is short for "Horizontal", "V" for "Vertical"
2396 #: ../src/mainfrm.cc:2412
2399 msgid "H %.2f%s, V %.2f%s"
2400 msgstr "H %.2f%s, V %.2f%s"
2402 #. TRANSLATORS: "Dist" is short for "Distance", "Brg" for "Bearing" (as
2403 #. in Compass bearing)
2404 #: ../src/mainfrm.cc:2424
2407 msgid "%s: %s, Dist %.2f%s, Brg %03.1f%s"
2408 msgstr "%s: %s, Dist %.2f%s, Azim %03.1f%s"
2410 #. TRANSLATORS: tickable menu item in View menu.
2412 #. "Metric" here means metres, km, etc (rather than feet, miles, etc)
2413 #: ../src/gfxcore.cc:4045
2414 #: ../src/gfxcore.cc:4065
2415 #: ../src/mainfrm.cc:977
2420 #. TRANSLATORS: tickable menu item in View menu.
2422 #. Degrees are the angular measurement where there are 360 in a full
2424 #: ../src/gfxcore.cc:4007
2425 #: ../src/gfxcore.cc:4025
2426 #: ../src/gfxcore.cc:4067
2427 #: ../src/mainfrm.cc:978
2432 #. TRANSLATORS: tickable menu item in View menu.
2434 #. Show the tilt of the survey as a percentage gradient (100% = 45
2435 #. degrees = 50 grad).
2436 #: ../src/gfxcore.cc:4030
2437 #: ../src/mainfrm.cc:979
2440 msgstr "Porc&entaje"
2442 #. TRANSLATORS: abbreviation for "kilometres" (unit of length),
2445 #. If there should be a space between the number and this, include
2446 #. one in the translation.
2447 #: ../src/gfxcore.cc:1283
2448 #: ../src/printing.cc:1322
2453 #. TRANSLATORS: abbreviation for "metres" (unit of length), used
2456 #. If there should be a space between the number and this, include
2457 #. one in the translation.
2458 #: ../src/commands.c:330
2459 #: ../src/gfxcore.cc:1118
2460 #: ../src/gfxcore.cc:1210
2461 #: ../src/gfxcore.cc:1290
2462 #: ../src/mainfrm.cc:2236
2463 #: ../src/mainfrm.cc:2303
2464 #: ../src/mainfrm.cc:2323
2465 #: ../src/mainfrm.cc:2372
2466 #: ../src/mainfrm.cc:2403
2467 #: ../src/printing.cc:1324
2472 #. TRANSLATORS: abbreviation for "centimetres" (unit of length),
2473 #. used e.g. "50cm".
2475 #. If there should be a space between the number and this, include
2476 #. one in the translation.
2477 #: ../src/gfxcore.cc:1298
2478 #: ../src/printing.cc:1327
2483 #. TRANSLATORS: abbreviation for "miles" (unit of length,
2484 #. plural), used e.g. "2 miles".
2486 #. If there should be a space between the number and this,
2487 #. include one in the translation.
2488 #: ../src/gfxcore.cc:1311
2493 #. TRANSLATORS: abbreviation for "mile" (unit of length,
2494 #. singular), used e.g. "1 mile".
2496 #. If there should be a space between the number and this,
2497 #. include one in the translation.
2498 #: ../src/gfxcore.cc:1318
2503 #. TRANSLATORS: abbreviation for "feet" (unit of length), used e.g.
2506 #. If there should be a space between the number and this, include
2507 #. one in the translation.
2508 #: ../src/commands.c:331
2509 #: ../src/gfxcore.cc:1118
2510 #: ../src/gfxcore.cc:1210
2511 #: ../src/gfxcore.cc:1326
2512 #: ../src/mainfrm.cc:2241
2513 #: ../src/mainfrm.cc:2306
2514 #: ../src/mainfrm.cc:2326
2515 #: ../src/mainfrm.cc:2377
2516 #: ../src/mainfrm.cc:2408
2521 #. TRANSLATORS: abbreviation for "inches" (unit of length), used
2524 #. If there should be a space between the number and this, include
2525 #. one in the translation.
2526 #: ../src/gfxcore.cc:1334
2531 #. TRANSLATORS: Menu item which turns off the "north arrow" in aven.
2532 #: ../src/gfxcore.cc:4002
2534 msgid "&Hide Compass"
2537 #. TRANSLATORS: Menu item which turns off the tilt indicator in aven.
2538 #: ../src/gfxcore.cc:4020
2543 #. TRANSLATORS: Menu item which turns off the scale bar in aven.
2544 #: ../src/gfxcore.cc:4040
2546 msgid "&Hide scale bar"
2549 #. TRANSLATORS: Menu item which turns off the colour key.
2550 #. The "Colour Key" is the thing in aven showing which colour
2551 #. corresponds to which depth, date, survey closure error, etc.
2552 #: ../src/gfxcore.cc:4063
2554 msgid "&Hide colour key"
2557 #. TRANSLATORS: degree symbol - probably should be translated to
2559 #: ../src/commands.c:333
2560 #: ../src/gfxcore.cc:770
2561 #: ../src/gfxcore.cc:860
2562 #: ../src/gfxcore.cc:1182
2563 #: ../src/mainfrm.cc:2290
2564 #: ../src/mainfrm.cc:2416
2565 #: ../src/printing.cc:88
2570 #. TRANSLATORS: symbol for grad (400 grad = 360 degrees = full
2572 #: ../src/commands.c:334
2573 #: ../src/gfxcore.cc:775
2574 #: ../src/gfxcore.cc:865
2575 #: ../src/gfxcore.cc:1182
2580 #. TRANSLATORS: symbol for percentage gradient (100% = 45
2581 #. degrees = 50 grad).
2582 #: ../src/commands.c:335
2583 #: ../src/gfxcore.cc:851
2584 #: ../src/gfxcore.cc:869
2589 #. TRANSLATORS: infinity symbol - used for the percentage gradient on
2591 #: ../src/gfxcore.cc:845
2596 #. TRANSLATORS: "H" is short for "Horizontal", "Brg" for "Bearing" (as
2597 #. in Compass bearing)
2598 #: ../src/mainfrm.cc:2310
2601 msgid "%s: H %.2f%s, Brg %03.1f%s"
2602 msgstr "%s: H %.2f%s, Azim %03.1f%s"
2604 #. TRANSLATORS: "V" is short for "Vertical"
2605 #: ../src/mainfrm.cc:2343
2608 msgid "%s: V %.2f%s"
2609 msgstr "%s: V %.2f%s"
2611 #. TRANSLATORS: labels for tabbed side panel this is for the tab with the
2612 #. tree hierarchy of survey station names
2613 #: ../src/mainfrm.cc:1122
2616 msgstr "Topografías"
2618 #: ../src/mainfrm.cc:1123
2620 msgid "Presentation"
2621 msgstr "Presentación"
2623 #. TRANSLATORS: In aven's survey tree, right-clicking on the root
2624 #. gives a pop-up menu and this is an option (but only enabled if
2625 #. the view is restricted to a subsurvey). It reloads the current
2626 #. survey file with the who survey visible.
2627 #: ../src/aventreectrl.cc:132
2630 msgstr "Mostrar todo"
2632 #. TRANSLATORS: In aven's survey tree, right-clicking on a survey
2633 #. name gives a pop-up menu and this is an option. It reloads the
2634 #. current survey file with the view restricted to the survey
2636 #: ../src/aventreectrl.cc:146
2641 #: ../src/mainfrm.cc:255
2646 #: ../src/mainfrm.cc:256
2651 #. TRANSLATORS: Aven menu items. An “&” goes before the letter of any
2654 #. The string "\t" separates the menu text and any accelerator key.
2656 #. "File" menu. The accelerators must be different within this group.
2657 #. c.f. 201, 380, 381.
2658 #: ../src/mainfrm.cc:796
2660 msgid "&Open...\tCtrl+O"
2661 msgstr "&Abrir...\tCtrl+O"
2663 #. TRANSLATORS: Open a "Terrain file" - i.e. a digital model of the
2665 #: ../src/mainfrm.cc:799
2667 msgid "Open &Terrain..."
2668 msgstr "Abrir &Terreno..."
2670 #: ../src/mainfrm.cc:800
2673 msgstr "Mostrar &Registro"
2675 #: ../src/mainfrm.cc:803
2677 msgid "&Print...\tCtrl+P"
2678 msgstr "&Imprimir...\tCtrl+P"
2680 #: ../src/mainfrm.cc:804
2682 msgid "P&age Setup..."
2683 msgstr "Configuración de la &página..."
2685 #. TRANSLATORS: In the "File" menu
2686 #: ../src/mainfrm.cc:807
2688 msgid "&Screenshot..."
2689 msgstr "&Captura de pantalla..."
2691 #. TRANSLATORS: In the "File" menu - c.f. n:191
2692 #: ../src/mainfrm.cc:810
2694 msgid "E&xtended Elevation..."
2695 msgstr "Alzado &Desarrollado..."
2697 #: ../src/mainfrm.cc:808
2699 msgid "&Export as..."
2700 msgstr "&Exporta como..."
2702 #. TRANSLATORS: Title of file dialog to choose name and type of exported
2704 #: ../src/printing.cc:722
2707 msgstr "Exporta como:"
2709 #. TRANSLATORS: Title of the export
2711 #: ../src/printing.cc:359
2716 #. TRANSLATORS: for about box:
2717 #: ../src/aboutdlg.cc:141
2719 msgid "System Information:"
2720 msgstr "Información del Sistema:"
2722 #. TRANSLATORS: Title of the print preview dialog
2723 #: ../src/printing.cc:761
2725 msgid "Print Preview"
2726 msgstr "Vista previa de la impressión"
2728 #. TRANSLATORS: Title of the print
2730 #: ../src/printing.cc:356
2735 #: ../src/printing.cc:654
2738 msgstr "&Imprimir..."
2740 #. TRANSLATORS: Here a "survey leg" is a set of measurements between two
2741 #. "survey stations".
2742 #: ../src/printing.cc:531
2744 msgid "Sur&face Survey Legs"
2745 msgstr "Tiradas de topografia de super&ficie"
2747 #. TRANSLATORS: Title of dialog to edit a waypoint in a presentation.
2748 #: ../src/mainfrm.cc:142
2750 msgid "Edit Waypoint"
2751 msgstr "Editar waypoint"
2753 #. TRANSLATORS: Note after "Scale" field in dialog to edit a waypoint
2754 #. in a presentation.
2755 #: ../src/mainfrm.cc:181
2757 msgid " (unused in perspective view)"
2760 #. TRANSLATORS: Field label in dialog to edit a waypoint in a
2762 #: ../src/mainfrm.cc:188
2767 #. TRANSLATORS: units+info after time field in dialog to edit a
2768 #. waypoint in a presentation.
2769 #: ../src/mainfrm.cc:192
2771 msgid " secs (0 = auto; *6 = 6 times auto)"
2774 #. TRANSLATORS: %s will be replaced with "Aven" currently (and
2775 #. perhaps by "Survex" or other things in future).
2776 #: ../src/aven.cc:297
2779 msgid "This version of %s requires OpenGL to work, but it isn’t available."
2780 msgstr "Se requiere OpenGL para trabajar la versión de %s, pero no está disponible."
2782 #: ../src/readval.c:348
2784 msgid "Separator in survey name"
2787 #. TRANSLATORS: Used in place of the station name when talking about an
2788 #. anonymous station.
2789 #: ../src/labelinfo.h:82
2791 msgid "anonymous station"
2794 #: ../src/readval.c:122
2795 #: ../src/readval.c:138
2796 #: ../src/readval.c:156
2798 msgid "Can't have a leg between two anonymous stations"
2801 #: ../src/mainfrm.cc:889
2802 #: ../src/printing.cc:535
2807 #: ../src/mainfrm.cc:896
2810 msgid "&Duplicate Legs"
2811 msgstr "Du&plicate Legs"
2813 #. TRANSLATORS: Item in the "Splay Legs" and "Duplicate Legs" submenus - if
2814 #. this is selected, such legs are not shown.
2815 #: ../src/mainfrm.cc:879
2816 #: ../src/mainfrm.cc:892
2821 #. TRANSLATORS: Item in the "Splay Legs" and "Duplicate Legs" submenus - if
2822 #. this is selected, aven will show such legs with less bright colours.
2823 #: ../src/mainfrm.cc:885
2824 #: ../src/mainfrm.cc:894
2827 msgstr "&Descolorarse"
2829 #. TRANSLATORS: Item in the "Splay Legs" and "Duplicate Legs" submenus - if
2830 #. this is selected, aven will show such legs with dashed lines.
2831 #: ../src/mainfrm.cc:882
2832 #: ../src/mainfrm.cc:893
2838 #. TRANSLATORS: Item in the "Splay Legs" and "Duplicate Legs" submenus - if
2839 #. this is selected, such legs are shown the same as other legs.
2840 #: ../src/mainfrm.cc:888
2841 #: ../src/mainfrm.cc:895
2846 #: ../src/extend.c:581
2848 msgid "Reading in data - please wait…"
2849 msgstr "Leyendo datos, espere por favor…"
2851 #. TRANSLATORS: for extend: the user specified breaking a loop or
2852 #. changing extend direction at this station, but we didn’t find it in
2854 #: ../src/extend.c:267
2855 #: ../src/extend.c:286
2856 #: ../src/extend.c:333
2857 #: ../src/extend.c:377
2858 #: ../src/extend.c:421
2861 msgid "Failed to find station %s"
2862 msgstr "La estación %s no se ha encontrado"
2864 #. TRANSLATORS: for extend: the user specified breaking a loop or
2865 #. changing extend direction at this leg, but we didn’t find it in the
2867 #: ../src/extend.c:313
2868 #: ../src/extend.c:357
2869 #: ../src/extend.c:401
2870 #: ../src/extend.c:446
2873 msgid "Failed to find leg %s → %s"
2874 msgstr "No se han encontrado las tiradas %s → %s"
2876 #. TRANSLATORS: for extend: "extend" is starting to produce an extended elevation from station %s
2877 #: ../src/extend.c:258
2880 msgid "Starting from station %s"
2881 msgstr "Inicio desde la estación %s"
2883 #. TRANSLATORS: for extend:
2884 #: ../src/extend.c:279
2887 msgid "Extending to the left from station %s"
2888 msgstr "Extendiendo hacia la izquierda desde la estación %s"
2890 #. TRANSLATORS: for extend:
2891 #: ../src/extend.c:326
2894 msgid "Extending to the right from station %s"
2895 msgstr "Extendiendo hacia la derecha desde la estación %s"
2897 #. TRANSLATORS: for extend:
2898 #: ../src/extend.c:300
2901 msgid "Extending to the left from leg %s → %s"
2902 msgstr "Extendiendo hacia la izquierda desde la tirada %s → %s"
2904 #. TRANSLATORS: for extend:
2905 #: ../src/extend.c:347
2908 msgid "Extending to the right from leg %s → %s"
2909 msgstr "Extendiendo hacia la derecha desde la tirada %s → %s"
2911 #. TRANSLATORS: for extend:
2912 #: ../src/extend.c:414
2915 msgid "Breaking survey loop at station %s"
2916 msgstr "Rompiendo el bucle en la estación %s"
2918 #. TRANSLATORS: for extend:
2919 #: ../src/extend.c:436
2922 msgid "Breaking survey loop at leg %s → %s"
2923 msgstr "Rompiendo el bucle en la tirada %s → %s"
2925 #. TRANSLATORS: for extend:
2926 #: ../src/extend.c:370
2929 msgid "Swapping extend direction from station %s"
2930 msgstr "Cambiando la dirección del alzado extendido desde la estación %s"
2932 #. TRANSLATORS: for extend:
2933 #: ../src/extend.c:391
2936 msgid "Swapping extend direction from leg %s → %s"
2937 msgstr "Cambiando la dirección del alzado extendido desde la tirada %s → %s"
2939 #. TRANSLATORS: for extend:
2940 #: ../src/extend.c:625
2943 msgid "Applying specfile: “%s”"
2944 msgstr "Aplicando fichero de especificaciones: “%s”"
2946 #. TRANSLATORS: for extend:
2947 #. Used to tell the user that a file is being written - %s is the filename
2948 #: ../src/extend.c:649
2952 msgstr "Escribiendo %s…"
2954 #. TRANSLATORS: --help output for sorterr --horizontal option
2955 #: ../src/sorterr.c:53
2957 msgid "sort by horizontal error factor"
2960 #. TRANSLATORS: --help output for sorterr --vertical option
2961 #: ../src/sorterr.c:55
2963 msgid "sort by vertical error factor"
2966 #. TRANSLATORS: --help output for sorterr --percentage option
2967 #: ../src/sorterr.c:57
2969 msgid "sort by percentage error"
2972 #. TRANSLATORS: --help output for sorterr --per-leg option
2973 #: ../src/sorterr.c:59
2975 msgid "sort by error per leg"
2978 #. TRANSLATORS: --help output for sorterr --replace option
2979 #: ../src/sorterr.c:61
2981 msgid "replace .err file with resorted version"
2984 #: ../src/sorterr.c:81
2985 #: ../src/sorterr.c:98
2986 #: ../src/sorterr.c:170
2988 msgid "Couldn’t parse .err file"
2989 msgstr "No se ha podido analizar el archivo de errores .err"
2991 #. TRANSLATORS: for diffpos:
2992 #: ../src/diffpos.c:159
2995 msgid "Moved by (%3.2f,%3.2f,%3.2f): %s"
2996 msgstr "Movido por (%3.2f,%3.2f,%3.2f): %s"
2998 #. TRANSLATORS: for diffpos:
2999 #: ../src/diffpos.c:196
3003 msgstr "Añadido: %s"
3005 #. TRANSLATORS: for diffpos:
3006 #: ../src/diffpos.c:219
3010 msgstr "Borrado: %s"
3012 #. TRANSLATORS: The first of two warnings given when a survey which has
3013 #. already been completed is reentered. This example file crawl.svx:
3015 #. *begin crawl ; <- second warning here
3018 #. *begin crawl ; <- first warning here
3024 #. crawl.svx:4: Reentering an existing survey is deprecated
3025 #. crawl.svx:1: Originally entered here
3027 #. If you're unsure what "deprecated" means, see:
3028 #. https://en.wikipedia.org/wiki/Deprecation
3029 #: ../src/commands.c:596
3032 msgid "Reentering an existing survey is deprecated"
3033 msgstr "Reentrar en un nivel de prefijo existente yo no se usa"
3035 #. TRANSLATORS: The second of two warnings given when a survey which has
3036 #. already been completed is reentered. This example file crawl.svx:
3039 #. 1 2 9.45 234 -01 # <- second warning here
3041 #. *begin crawl # <- first warning here
3047 #. crawl.svx:3: Reentering an existing survey is deprecated
3048 #. crawl.svx:1: Originally entered here
3050 #. If you're unsure what "deprecated" means, see:
3051 #. https://en.wikipedia.org/wiki/Deprecation
3052 #: ../src/commands.c:615
3054 msgid "Originally entered here"
3055 msgstr "Originalmente entrado aqui"
3057 #. TRANSLATORS: Use of the ROOT character (which is "\" by default) is
3058 #. deprecated, so this error would be generated by:
3062 #. If you're unsure what "deprecated" means, see:
3063 #. https://en.wikipedia.org/wiki/Deprecation
3064 #: ../src/commands.c:513
3065 #: ../src/readval.c:86
3066 #: ../src/readval.c:90
3068 msgid "ROOT is deprecated"
3069 msgstr "ROOT ya no se usa"
3071 #. TRANSLATORS: --help output for dump3d --rewind option
3072 #: ../src/dump3d.c:51
3074 msgid "rewind file and read it a second time"
3077 #: ../src/dump3d.c:52
3079 msgid "show survey date information (if present)"
3082 #: ../src/findentrances.cc:111
3083 #: ../src/gfxcore.cc:2833
3088 msgid "Failed to initialise input coordinate system “%s”"
3091 #: ../src/findentrances.cc:114
3092 #: ../src/gfxcore.cc:2842
3097 msgid "Failed to initialise output coordinate system “%s”"
3100 #: ../src/findentrances.cc:169
3102 msgid "-d PROJ_DATUM 3D_FILE"
3103 msgstr "-d DATURM_PROJ ARCHIVO_3D"
3105 #. TRANSLATORS: The PROJ library is used to do coordinate transformations
3106 #. (https://trac.osgeo.org/proj/) - the user passes a string to tell PROJ
3107 #. what the input datum is.
3108 #: ../src/findentrances.cc:160
3110 msgid "input datum as string to pass to PROJ"
3113 #. TRANSLATORS: The PROJ library is used to do coordinate
3114 #. transformations (https://trac.osgeo.org/proj/) - if the .3d file
3115 #. doesn't contain details of the coordinate projection in use, the
3116 #. user must specify it here for export formats which need to know it
3118 #: ../src/printing.cc:614
3120 msgid "Coordinate projection"
3123 #: ../src/cad3d.c:661
3125 msgid "do not generate station markers"
3128 #: ../src/cad3d.c:662
3130 msgid "do not generate station labels"
3133 #: ../src/cad3d.c:663
3135 msgid "do not generate survey legs"
3138 #: ../src/cad3d.c:667
3140 msgid "produce an elevation view"
3143 #: ../src/cad3d.c:664
3146 msgid "generate grid (default %sm)"
3149 #: ../src/cad3d.c:665
3152 msgid "station labels text height (default %s)"
3155 #: ../src/cad3d.c:666
3158 msgid "station marker size (default %s)"
3159 msgstr "tamaño de la marca de la estación (%s por defecto)"
3161 #: ../src/cad3d.c:668
3164 msgid "factor to scale down by (default %s)"
3167 #: ../src/cad3d.c:669
3169 msgid "produce DXF output"
3172 #. TRANSLATORS: "Skencil" is the name of a software package, so should not be
3174 #: ../src/cad3d.c:672
3176 msgid "produce Skencil output"
3179 #. TRANSLATORS: "Compass" and "Carto" are the names of software packages,
3180 #. so should not be translated.
3181 #: ../src/cad3d.c:675
3183 msgid "produce Compass PLT output for Carto"
3186 #: ../src/cad3d.c:676
3188 msgid "produce SVG output"
3192 #~ msgid "Error in format of font file “%s”"
3193 #~ msgstr "Error en el formato del archivo de fuentes “%s”"
3195 #. TRANSLATORS: Show the terrain as solid rather than transparent.
3196 #~ msgid "Solid Su&rface"
3197 #~ msgstr "Superficie Sóli&da"
3199 #. TRANSLATORS: number of stations found matching search
3202 #~ msgstr "%d encontradas"
3204 #: ../src/mainfrm.cc:944
3206 #~ msgid "&Preferences..."
3207 #~ msgstr "&Preferencias..."
3210 #~ msgid "Draw passage walls"
3211 #~ msgstr "Dibuja las paredes"
3214 #~ msgid "Estimate LRUD readings based on heuristics"
3215 #~ msgstr "Estimación heurística de los datos LRUD"
3218 #~ msgid "Mark survey stations with crosses"
3219 #~ msgstr "Marcar las estaciones topográficas con cruces"
3222 #~ msgid "Highlight stations marked as entrances"
3223 #~ msgstr "Destacar las estaciones marcadas como entradas"
3226 #~ msgid "Highlight stations marked as fixed points"
3227 #~ msgstr "Destacar las estaciones marcadas como puntos fijos"
3230 #~ msgid "Highlight stations which are exported"
3231 #~ msgstr "Destacar las estaciones exportadas"
3234 #~ msgid "Mark survey stations with their names"
3235 #~ msgstr "Marcar las estaciones topográficas con sus nombres"
3238 #~ msgid "Allow names to overlap on the display (faster)"
3239 #~ msgstr "Permitir que los nombres se sobrepongan (más rápido)"
3241 #. TRANSLATORS: Here a "survey leg" is a set of measurements between two
3242 #. "survey stations".
3244 #~ msgid "Display underground survey legs"
3245 #~ msgstr "Muestra las tiradas subterráneas"
3247 #. TRANSLATORS: Here a "survey leg" is a set of measurements between two
3248 #. "survey stations".
3250 #~ msgid "Display surface survey legs"
3251 #~ msgstr "Muestra las tiradas de superficie"
3254 #~ msgid "Colour surface surveys by depth"
3255 #~ msgstr "Colorea las tiradas de superficie según profundidad"
3258 #~ msgid "Draw surface legs with dashed lines"
3259 #~ msgstr "Dibuja las tiradas de superficie con líneas punteadas"
3262 #~ msgid "Draw a grid"
3263 #~ msgstr "Dibuja una cuadrícula"
3266 #~ msgid "metric units"
3267 #~ msgstr "unidades en sistema métrico"
3269 #. TRANSLATORS: Miles, Feet, Inches, etc. What they call "English units" in
3270 #. the USA (rather confusingly now that England has largely gone metric!)
3272 #~ msgid "imperial units"
3273 #~ msgstr "unidades en sistema imperial"
3275 #. TRANSLATORS: Degrees are the angular measurement where there are 360 in a
3278 #~ msgid "degrees (°)"
3279 #~ msgstr "grados (°)"
3281 #. TRANSLATORS: Grads are the angular measurement where there are 400 in a
3285 #~ msgstr "grados centesimales"
3288 #~ msgid "Display measurements in"
3289 #~ msgstr "Muestra las distancias en"
3292 #~ msgid "Display angles in"
3293 #~ msgstr "Muestra los ángulos en"
3295 #. TRANSLATORS: reverses the sense of the mouse controls
3297 #~ msgid "Reverse the sense of the controls"
3298 #~ msgstr "Invierte el sentido de los controles"
3301 #~ msgid "Display scale bar"
3302 #~ msgstr "Muestra la escala gráfica"
3305 #~ msgid "Display depth bar"
3306 #~ msgstr "Muestra la escala de profundidad"
3309 #~ msgid "Display compass"
3310 #~ msgstr "Muestra la brújula"
3313 #~ msgid "Display clinometer"
3314 #~ msgstr "Muestra el clinómetro"
3317 #~ msgid "Display side panel"
3318 #~ msgstr "Muestra el panel lateral"