2 * QEMU IDE disk and CD/DVD-ROM Emulator
4 * Copyright (c) 2003 Fabrice Bellard
5 * Copyright (c) 2006 Openedhand Ltd.
7 * Permission is hereby granted, free of charge, to any person obtaining a copy
8 * of this software and associated documentation files (the "Software"), to deal
9 * in the Software without restriction, including without limitation the rights
10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11 * copies of the Software, and to permit persons to whom the Software is
12 * furnished to do so, subject to the following conditions:
14 * The above copyright notice and this permission notice shall be included in
15 * all copies or substantial portions of the Software.
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
26 #include "qemu/osdep.h"
27 #include "hw/isa/isa.h"
28 #include "migration/vmstate.h"
29 #include "qemu/error-report.h"
30 #include "qemu/main-loop.h"
31 #include "qemu/timer.h"
32 #include "sysemu/sysemu.h"
33 #include "sysemu/blockdev.h"
34 #include "sysemu/dma.h"
35 #include "hw/block/block.h"
36 #include "sysemu/block-backend.h"
37 #include "qapi/error.h"
38 #include "qemu/cutils.h"
39 #include "sysemu/replay.h"
40 #include "sysemu/runstate.h"
41 #include "hw/ide/internal.h"
44 /* These values were based on a Seagate ST3500418AS but have been modified
45 to make more sense in QEMU */
46 static const int smart_attributes
[][12] = {
47 /* id, flags, hflags, val, wrst, raw (6 bytes), threshold */
48 /* raw read error rate*/
49 { 0x01, 0x03, 0x00, 0x64, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06},
51 { 0x03, 0x03, 0x00, 0x64, 0x64, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
52 /* start stop count */
53 { 0x04, 0x02, 0x00, 0x64, 0x64, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14},
54 /* remapped sectors */
55 { 0x05, 0x03, 0x00, 0x64, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x24},
57 { 0x09, 0x03, 0x00, 0x64, 0x64, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
58 /* power cycle count */
59 { 0x0c, 0x03, 0x00, 0x64, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
60 /* airflow-temperature-celsius */
61 { 190, 0x03, 0x00, 0x45, 0x45, 0x1f, 0x00, 0x1f, 0x1f, 0x00, 0x00, 0x32},
64 const char *IDE_DMA_CMD_lookup
[IDE_DMA__COUNT
] = {
65 [IDE_DMA_READ
] = "DMA READ",
66 [IDE_DMA_WRITE
] = "DMA WRITE",
67 [IDE_DMA_TRIM
] = "DMA TRIM",
68 [IDE_DMA_ATAPI
] = "DMA ATAPI"
71 static const char *IDE_DMA_CMD_str(enum ide_dma_cmd enval
)
73 if ((unsigned)enval
< IDE_DMA__COUNT
) {
74 return IDE_DMA_CMD_lookup
[enval
];
76 return "DMA UNKNOWN CMD";
79 static void ide_dummy_transfer_stop(IDEState
*s
);
81 static void padstr(char *str
, const char *src
, int len
)
84 for(i
= 0; i
< len
; i
++) {
93 static void put_le16(uint16_t *p
, unsigned int v
)
98 static void ide_identify_size(IDEState
*s
)
100 uint16_t *p
= (uint16_t *)s
->identify_data
;
101 put_le16(p
+ 60, s
->nb_sectors
);
102 put_le16(p
+ 61, s
->nb_sectors
>> 16);
103 put_le16(p
+ 100, s
->nb_sectors
);
104 put_le16(p
+ 101, s
->nb_sectors
>> 16);
105 put_le16(p
+ 102, s
->nb_sectors
>> 32);
106 put_le16(p
+ 103, s
->nb_sectors
>> 48);
109 static void ide_identify(IDEState
*s
)
112 unsigned int oldsize
;
113 IDEDevice
*dev
= s
->unit
? s
->bus
->slave
: s
->bus
->master
;
115 p
= (uint16_t *)s
->identify_data
;
116 if (s
->identify_set
) {
119 memset(p
, 0, sizeof(s
->identify_data
));
121 put_le16(p
+ 0, 0x0040);
122 put_le16(p
+ 1, s
->cylinders
);
123 put_le16(p
+ 3, s
->heads
);
124 put_le16(p
+ 4, 512 * s
->sectors
); /* XXX: retired, remove ? */
125 put_le16(p
+ 5, 512); /* XXX: retired, remove ? */
126 put_le16(p
+ 6, s
->sectors
);
127 padstr((char *)(p
+ 10), s
->drive_serial_str
, 20); /* serial number */
128 put_le16(p
+ 20, 3); /* XXX: retired, remove ? */
129 put_le16(p
+ 21, 512); /* cache size in sectors */
130 put_le16(p
+ 22, 4); /* ecc bytes */
131 padstr((char *)(p
+ 23), s
->version
, 8); /* firmware version */
132 padstr((char *)(p
+ 27), s
->drive_model_str
, 40); /* model */
133 #if MAX_MULT_SECTORS > 1
134 put_le16(p
+ 47, 0x8000 | MAX_MULT_SECTORS
);
136 put_le16(p
+ 48, 1); /* dword I/O */
137 put_le16(p
+ 49, (1 << 11) | (1 << 9) | (1 << 8)); /* DMA and LBA supported */
138 put_le16(p
+ 51, 0x200); /* PIO transfer cycle */
139 put_le16(p
+ 52, 0x200); /* DMA transfer cycle */
140 put_le16(p
+ 53, 1 | (1 << 1) | (1 << 2)); /* words 54-58,64-70,88 are valid */
141 put_le16(p
+ 54, s
->cylinders
);
142 put_le16(p
+ 55, s
->heads
);
143 put_le16(p
+ 56, s
->sectors
);
144 oldsize
= s
->cylinders
* s
->heads
* s
->sectors
;
145 put_le16(p
+ 57, oldsize
);
146 put_le16(p
+ 58, oldsize
>> 16);
148 put_le16(p
+ 59, 0x100 | s
->mult_sectors
);
149 /* *(p + 60) := nb_sectors -- see ide_identify_size */
150 /* *(p + 61) := nb_sectors >> 16 -- see ide_identify_size */
151 put_le16(p
+ 62, 0x07); /* single word dma0-2 supported */
152 put_le16(p
+ 63, 0x07); /* mdma0-2 supported */
153 put_le16(p
+ 64, 0x03); /* pio3-4 supported */
154 put_le16(p
+ 65, 120);
155 put_le16(p
+ 66, 120);
156 put_le16(p
+ 67, 120);
157 put_le16(p
+ 68, 120);
158 if (dev
&& dev
->conf
.discard_granularity
) {
159 put_le16(p
+ 69, (1 << 14)); /* determinate TRIM behavior */
163 put_le16(p
+ 75, s
->ncq_queues
- 1);
165 put_le16(p
+ 76, (1 << 8));
168 put_le16(p
+ 80, 0xf0); /* ata3 -> ata6 supported */
169 put_le16(p
+ 81, 0x16); /* conforms to ata5 */
170 /* 14=NOP supported, 5=WCACHE supported, 0=SMART supported */
171 put_le16(p
+ 82, (1 << 14) | (1 << 5) | 1);
172 /* 13=flush_cache_ext,12=flush_cache,10=lba48 */
173 put_le16(p
+ 83, (1 << 14) | (1 << 13) | (1 <<12) | (1 << 10));
174 /* 14=set to 1, 8=has WWN, 1=SMART self test, 0=SMART error logging */
176 put_le16(p
+ 84, (1 << 14) | (1 << 8) | 0);
178 put_le16(p
+ 84, (1 << 14) | 0);
180 /* 14 = NOP supported, 5=WCACHE enabled, 0=SMART feature set enabled */
181 if (blk_enable_write_cache(s
->blk
)) {
182 put_le16(p
+ 85, (1 << 14) | (1 << 5) | 1);
184 put_le16(p
+ 85, (1 << 14) | 1);
186 /* 13=flush_cache_ext,12=flush_cache,10=lba48 */
187 put_le16(p
+ 86, (1 << 13) | (1 <<12) | (1 << 10));
188 /* 14=set to 1, 8=has WWN, 1=SMART self test, 0=SMART error logging */
190 put_le16(p
+ 87, (1 << 14) | (1 << 8) | 0);
192 put_le16(p
+ 87, (1 << 14) | 0);
194 put_le16(p
+ 88, 0x3f | (1 << 13)); /* udma5 set and supported */
195 put_le16(p
+ 93, 1 | (1 << 14) | 0x2000);
196 /* *(p + 100) := nb_sectors -- see ide_identify_size */
197 /* *(p + 101) := nb_sectors >> 16 -- see ide_identify_size */
198 /* *(p + 102) := nb_sectors >> 32 -- see ide_identify_size */
199 /* *(p + 103) := nb_sectors >> 48 -- see ide_identify_size */
201 if (dev
&& dev
->conf
.physical_block_size
)
202 put_le16(p
+ 106, 0x6000 | get_physical_block_exp(&dev
->conf
));
204 /* LE 16-bit words 111-108 contain 64-bit World Wide Name */
205 put_le16(p
+ 108, s
->wwn
>> 48);
206 put_le16(p
+ 109, s
->wwn
>> 32);
207 put_le16(p
+ 110, s
->wwn
>> 16);
208 put_le16(p
+ 111, s
->wwn
);
210 if (dev
&& dev
->conf
.discard_granularity
) {
211 put_le16(p
+ 169, 1); /* TRIM support */
214 put_le16(p
+ 217, dev
->rotation_rate
); /* Nominal media rotation rate */
217 ide_identify_size(s
);
221 memcpy(s
->io_buffer
, p
, sizeof(s
->identify_data
));
224 static void ide_atapi_identify(IDEState
*s
)
228 p
= (uint16_t *)s
->identify_data
;
229 if (s
->identify_set
) {
232 memset(p
, 0, sizeof(s
->identify_data
));
234 /* Removable CDROM, 50us response, 12 byte packets */
235 put_le16(p
+ 0, (2 << 14) | (5 << 8) | (1 << 7) | (2 << 5) | (0 << 0));
236 padstr((char *)(p
+ 10), s
->drive_serial_str
, 20); /* serial number */
237 put_le16(p
+ 20, 3); /* buffer type */
238 put_le16(p
+ 21, 512); /* cache size in sectors */
239 put_le16(p
+ 22, 4); /* ecc bytes */
240 padstr((char *)(p
+ 23), s
->version
, 8); /* firmware version */
241 padstr((char *)(p
+ 27), s
->drive_model_str
, 40); /* model */
242 put_le16(p
+ 48, 1); /* dword I/O (XXX: should not be set on CDROM) */
244 put_le16(p
+ 49, 1 << 9 | 1 << 8); /* DMA and LBA supported */
245 put_le16(p
+ 53, 7); /* words 64-70, 54-58, 88 valid */
246 put_le16(p
+ 62, 7); /* single word dma0-2 supported */
247 put_le16(p
+ 63, 7); /* mdma0-2 supported */
249 put_le16(p
+ 49, 1 << 9); /* LBA supported, no DMA */
250 put_le16(p
+ 53, 3); /* words 64-70, 54-58 valid */
251 put_le16(p
+ 63, 0x103); /* DMA modes XXX: may be incorrect */
253 put_le16(p
+ 64, 3); /* pio3-4 supported */
254 put_le16(p
+ 65, 0xb4); /* minimum DMA multiword tx cycle time */
255 put_le16(p
+ 66, 0xb4); /* recommended DMA multiword tx cycle time */
256 put_le16(p
+ 67, 0x12c); /* minimum PIO cycle time without flow control */
257 put_le16(p
+ 68, 0xb4); /* minimum PIO cycle time with IORDY flow control */
259 put_le16(p
+ 71, 30); /* in ns */
260 put_le16(p
+ 72, 30); /* in ns */
263 put_le16(p
+ 75, s
->ncq_queues
- 1);
265 put_le16(p
+ 76, (1 << 8));
268 put_le16(p
+ 80, 0x1e); /* support up to ATA/ATAPI-4 */
270 put_le16(p
+ 84, (1 << 8)); /* supports WWN for words 108-111 */
271 put_le16(p
+ 87, (1 << 8)); /* WWN enabled */
275 put_le16(p
+ 88, 0x3f | (1 << 13)); /* udma5 set and supported */
279 /* LE 16-bit words 111-108 contain 64-bit World Wide Name */
280 put_le16(p
+ 108, s
->wwn
>> 48);
281 put_le16(p
+ 109, s
->wwn
>> 32);
282 put_le16(p
+ 110, s
->wwn
>> 16);
283 put_le16(p
+ 111, s
->wwn
);
289 memcpy(s
->io_buffer
, p
, sizeof(s
->identify_data
));
292 static void ide_cfata_identify_size(IDEState
*s
)
294 uint16_t *p
= (uint16_t *)s
->identify_data
;
295 put_le16(p
+ 7, s
->nb_sectors
>> 16); /* Sectors per card */
296 put_le16(p
+ 8, s
->nb_sectors
); /* Sectors per card */
297 put_le16(p
+ 60, s
->nb_sectors
); /* Total LBA sectors */
298 put_le16(p
+ 61, s
->nb_sectors
>> 16); /* Total LBA sectors */
301 static void ide_cfata_identify(IDEState
*s
)
306 p
= (uint16_t *)s
->identify_data
;
307 if (s
->identify_set
) {
310 memset(p
, 0, sizeof(s
->identify_data
));
312 cur_sec
= s
->cylinders
* s
->heads
* s
->sectors
;
314 put_le16(p
+ 0, 0x848a); /* CF Storage Card signature */
315 put_le16(p
+ 1, s
->cylinders
); /* Default cylinders */
316 put_le16(p
+ 3, s
->heads
); /* Default heads */
317 put_le16(p
+ 6, s
->sectors
); /* Default sectors per track */
318 /* *(p + 7) := nb_sectors >> 16 -- see ide_cfata_identify_size */
319 /* *(p + 8) := nb_sectors -- see ide_cfata_identify_size */
320 padstr((char *)(p
+ 10), s
->drive_serial_str
, 20); /* serial number */
321 put_le16(p
+ 22, 0x0004); /* ECC bytes */
322 padstr((char *) (p
+ 23), s
->version
, 8); /* Firmware Revision */
323 padstr((char *) (p
+ 27), s
->drive_model_str
, 40);/* Model number */
324 #if MAX_MULT_SECTORS > 1
325 put_le16(p
+ 47, 0x8000 | MAX_MULT_SECTORS
);
327 put_le16(p
+ 47, 0x0000);
329 put_le16(p
+ 49, 0x0f00); /* Capabilities */
330 put_le16(p
+ 51, 0x0002); /* PIO cycle timing mode */
331 put_le16(p
+ 52, 0x0001); /* DMA cycle timing mode */
332 put_le16(p
+ 53, 0x0003); /* Translation params valid */
333 put_le16(p
+ 54, s
->cylinders
); /* Current cylinders */
334 put_le16(p
+ 55, s
->heads
); /* Current heads */
335 put_le16(p
+ 56, s
->sectors
); /* Current sectors */
336 put_le16(p
+ 57, cur_sec
); /* Current capacity */
337 put_le16(p
+ 58, cur_sec
>> 16); /* Current capacity */
338 if (s
->mult_sectors
) /* Multiple sector setting */
339 put_le16(p
+ 59, 0x100 | s
->mult_sectors
);
340 /* *(p + 60) := nb_sectors -- see ide_cfata_identify_size */
341 /* *(p + 61) := nb_sectors >> 16 -- see ide_cfata_identify_size */
342 put_le16(p
+ 63, 0x0203); /* Multiword DMA capability */
343 put_le16(p
+ 64, 0x0001); /* Flow Control PIO support */
344 put_le16(p
+ 65, 0x0096); /* Min. Multiword DMA cycle */
345 put_le16(p
+ 66, 0x0096); /* Rec. Multiword DMA cycle */
346 put_le16(p
+ 68, 0x00b4); /* Min. PIO cycle time */
347 put_le16(p
+ 82, 0x400c); /* Command Set supported */
348 put_le16(p
+ 83, 0x7068); /* Command Set supported */
349 put_le16(p
+ 84, 0x4000); /* Features supported */
350 put_le16(p
+ 85, 0x000c); /* Command Set enabled */
351 put_le16(p
+ 86, 0x7044); /* Command Set enabled */
352 put_le16(p
+ 87, 0x4000); /* Features enabled */
353 put_le16(p
+ 91, 0x4060); /* Current APM level */
354 put_le16(p
+ 129, 0x0002); /* Current features option */
355 put_le16(p
+ 130, 0x0005); /* Reassigned sectors */
356 put_le16(p
+ 131, 0x0001); /* Initial power mode */
357 put_le16(p
+ 132, 0x0000); /* User signature */
358 put_le16(p
+ 160, 0x8100); /* Power requirement */
359 put_le16(p
+ 161, 0x8001); /* CF command set */
361 ide_cfata_identify_size(s
);
365 memcpy(s
->io_buffer
, p
, sizeof(s
->identify_data
));
368 static void ide_set_signature(IDEState
*s
)
370 s
->select
&= 0xf0; /* clear head */
374 if (s
->drive_kind
== IDE_CD
) {
386 static bool ide_sect_range_ok(IDEState
*s
,
387 uint64_t sector
, uint64_t nb_sectors
)
389 uint64_t total_sectors
;
391 blk_get_geometry(s
->blk
, &total_sectors
);
392 if (sector
> total_sectors
|| nb_sectors
> total_sectors
- sector
) {
398 typedef struct TrimAIOCB
{
408 static void trim_aio_cancel(BlockAIOCB
*acb
)
410 TrimAIOCB
*iocb
= container_of(acb
, TrimAIOCB
, common
);
412 /* Exit the loop so ide_issue_trim_cb will not continue */
413 iocb
->j
= iocb
->qiov
->niov
- 1;
414 iocb
->i
= (iocb
->qiov
->iov
[iocb
->j
].iov_len
/ 8) - 1;
416 iocb
->ret
= -ECANCELED
;
419 blk_aio_cancel_async(iocb
->aiocb
);
424 static const AIOCBInfo trim_aiocb_info
= {
425 .aiocb_size
= sizeof(TrimAIOCB
),
426 .cancel_async
= trim_aio_cancel
,
429 static void ide_trim_bh_cb(void *opaque
)
431 TrimAIOCB
*iocb
= opaque
;
433 iocb
->common
.cb(iocb
->common
.opaque
, iocb
->ret
);
435 qemu_bh_delete(iocb
->bh
);
437 qemu_aio_unref(iocb
);
440 static void ide_issue_trim_cb(void *opaque
, int ret
)
442 TrimAIOCB
*iocb
= opaque
;
443 IDEState
*s
= iocb
->s
;
447 block_acct_done(blk_get_stats(s
->blk
), &s
->acct
);
449 block_acct_failed(blk_get_stats(s
->blk
), &s
->acct
);
454 while (iocb
->j
< iocb
->qiov
->niov
) {
456 while (++iocb
->i
< iocb
->qiov
->iov
[j
].iov_len
/ 8) {
458 uint64_t *buffer
= iocb
->qiov
->iov
[j
].iov_base
;
460 /* 6-byte LBA + 2-byte range per entry */
461 uint64_t entry
= le64_to_cpu(buffer
[i
]);
462 uint64_t sector
= entry
& 0x0000ffffffffffffULL
;
463 uint16_t count
= entry
>> 48;
469 if (!ide_sect_range_ok(s
, sector
, count
)) {
470 block_acct_invalid(blk_get_stats(s
->blk
), BLOCK_ACCT_UNMAP
);
475 block_acct_start(blk_get_stats(s
->blk
), &s
->acct
,
476 count
<< BDRV_SECTOR_BITS
, BLOCK_ACCT_UNMAP
);
478 /* Got an entry! Submit and exit. */
479 iocb
->aiocb
= blk_aio_pdiscard(s
->blk
,
480 sector
<< BDRV_SECTOR_BITS
,
481 count
<< BDRV_SECTOR_BITS
,
482 ide_issue_trim_cb
, opaque
);
496 replay_bh_schedule_event(iocb
->bh
);
500 BlockAIOCB
*ide_issue_trim(
501 int64_t offset
, QEMUIOVector
*qiov
,
502 BlockCompletionFunc
*cb
, void *cb_opaque
, void *opaque
)
504 IDEState
*s
= opaque
;
507 iocb
= blk_aio_get(&trim_aiocb_info
, s
->blk
, cb
, cb_opaque
);
509 iocb
->bh
= qemu_bh_new(ide_trim_bh_cb
, iocb
);
514 ide_issue_trim_cb(iocb
, 0);
515 return &iocb
->common
;
518 void ide_abort_command(IDEState
*s
)
520 ide_transfer_stop(s
);
521 s
->status
= READY_STAT
| ERR_STAT
;
525 static void ide_set_retry(IDEState
*s
)
527 s
->bus
->retry_unit
= s
->unit
;
528 s
->bus
->retry_sector_num
= ide_get_sector(s
);
529 s
->bus
->retry_nsector
= s
->nsector
;
532 static void ide_clear_retry(IDEState
*s
)
534 s
->bus
->retry_unit
= -1;
535 s
->bus
->retry_sector_num
= 0;
536 s
->bus
->retry_nsector
= 0;
539 /* prepare data transfer and tell what to do after */
540 bool ide_transfer_start_norecurse(IDEState
*s
, uint8_t *buf
, int size
,
541 EndTransferFunc
*end_transfer_func
)
544 s
->data_end
= buf
+ size
;
546 if (!(s
->status
& ERR_STAT
)) {
547 s
->status
|= DRQ_STAT
;
549 if (!s
->bus
->dma
->ops
->pio_transfer
) {
550 s
->end_transfer_func
= end_transfer_func
;
553 s
->bus
->dma
->ops
->pio_transfer(s
->bus
->dma
);
557 void ide_transfer_start(IDEState
*s
, uint8_t *buf
, int size
,
558 EndTransferFunc
*end_transfer_func
)
560 if (ide_transfer_start_norecurse(s
, buf
, size
, end_transfer_func
)) {
561 end_transfer_func(s
);
565 static void ide_cmd_done(IDEState
*s
)
567 if (s
->bus
->dma
->ops
->cmd_done
) {
568 s
->bus
->dma
->ops
->cmd_done(s
->bus
->dma
);
572 static void ide_transfer_halt(IDEState
*s
)
574 s
->end_transfer_func
= ide_transfer_stop
;
575 s
->data_ptr
= s
->io_buffer
;
576 s
->data_end
= s
->io_buffer
;
577 s
->status
&= ~DRQ_STAT
;
580 void ide_transfer_stop(IDEState
*s
)
582 ide_transfer_halt(s
);
586 int64_t ide_get_sector(IDEState
*s
)
589 if (s
->select
& 0x40) {
592 sector_num
= ((s
->select
& 0x0f) << 24) | (s
->hcyl
<< 16) |
593 (s
->lcyl
<< 8) | s
->sector
;
595 sector_num
= ((int64_t)s
->hob_hcyl
<< 40) |
596 ((int64_t) s
->hob_lcyl
<< 32) |
597 ((int64_t) s
->hob_sector
<< 24) |
598 ((int64_t) s
->hcyl
<< 16) |
599 ((int64_t) s
->lcyl
<< 8) | s
->sector
;
602 sector_num
= ((s
->hcyl
<< 8) | s
->lcyl
) * s
->heads
* s
->sectors
+
603 (s
->select
& 0x0f) * s
->sectors
+ (s
->sector
- 1);
608 void ide_set_sector(IDEState
*s
, int64_t sector_num
)
611 if (s
->select
& 0x40) {
613 s
->select
= (s
->select
& 0xf0) | (sector_num
>> 24);
614 s
->hcyl
= (sector_num
>> 16);
615 s
->lcyl
= (sector_num
>> 8);
616 s
->sector
= (sector_num
);
618 s
->sector
= sector_num
;
619 s
->lcyl
= sector_num
>> 8;
620 s
->hcyl
= sector_num
>> 16;
621 s
->hob_sector
= sector_num
>> 24;
622 s
->hob_lcyl
= sector_num
>> 32;
623 s
->hob_hcyl
= sector_num
>> 40;
626 cyl
= sector_num
/ (s
->heads
* s
->sectors
);
627 r
= sector_num
% (s
->heads
* s
->sectors
);
630 s
->select
= (s
->select
& 0xf0) | ((r
/ s
->sectors
) & 0x0f);
631 s
->sector
= (r
% s
->sectors
) + 1;
635 static void ide_rw_error(IDEState
*s
) {
636 ide_abort_command(s
);
640 static void ide_buffered_readv_cb(void *opaque
, int ret
)
642 IDEBufferedRequest
*req
= opaque
;
643 if (!req
->orphaned
) {
645 assert(req
->qiov
.size
== req
->original_qiov
->size
);
646 qemu_iovec_from_buf(req
->original_qiov
, 0,
647 req
->qiov
.local_iov
.iov_base
,
648 req
->original_qiov
->size
);
650 req
->original_cb(req
->original_opaque
, ret
);
652 QLIST_REMOVE(req
, list
);
653 qemu_vfree(qemu_iovec_buf(&req
->qiov
));
657 #define MAX_BUFFERED_REQS 16
659 BlockAIOCB
*ide_buffered_readv(IDEState
*s
, int64_t sector_num
,
660 QEMUIOVector
*iov
, int nb_sectors
,
661 BlockCompletionFunc
*cb
, void *opaque
)
664 IDEBufferedRequest
*req
;
667 QLIST_FOREACH(req
, &s
->buffered_requests
, list
) {
670 if (c
> MAX_BUFFERED_REQS
) {
671 return blk_abort_aio_request(s
->blk
, cb
, opaque
, -EIO
);
674 req
= g_new0(IDEBufferedRequest
, 1);
675 req
->original_qiov
= iov
;
676 req
->original_cb
= cb
;
677 req
->original_opaque
= opaque
;
678 qemu_iovec_init_buf(&req
->qiov
, blk_blockalign(s
->blk
, iov
->size
),
681 aioreq
= blk_aio_preadv(s
->blk
, sector_num
<< BDRV_SECTOR_BITS
,
682 &req
->qiov
, 0, ide_buffered_readv_cb
, req
);
684 QLIST_INSERT_HEAD(&s
->buffered_requests
, req
, list
);
689 * Cancel all pending DMA requests.
690 * Any buffered DMA requests are instantly canceled,
691 * but any pending unbuffered DMA requests must be waited on.
693 void ide_cancel_dma_sync(IDEState
*s
)
695 IDEBufferedRequest
*req
;
697 /* First invoke the callbacks of all buffered requests
698 * and flag those requests as orphaned. Ideally there
699 * are no unbuffered (Scatter Gather DMA Requests or
700 * write requests) pending and we can avoid to drain. */
701 QLIST_FOREACH(req
, &s
->buffered_requests
, list
) {
702 if (!req
->orphaned
) {
703 trace_ide_cancel_dma_sync_buffered(req
->original_cb
, req
);
704 req
->original_cb(req
->original_opaque
, -ECANCELED
);
706 req
->orphaned
= true;
710 * We can't cancel Scatter Gather DMA in the middle of the
711 * operation or a partial (not full) DMA transfer would reach
712 * the storage so we wait for completion instead (we beahve
713 * like if the DMA was completed by the time the guest trying
714 * to cancel dma with bmdma_cmd_writeb with BM_CMD_START not
717 * In the future we'll be able to safely cancel the I/O if the
718 * whole DMA operation will be submitted to disk with a single
719 * aio operation with preadv/pwritev.
721 if (s
->bus
->dma
->aiocb
) {
722 trace_ide_cancel_dma_sync_remaining();
724 assert(s
->bus
->dma
->aiocb
== NULL
);
728 static void ide_sector_read(IDEState
*s
);
730 static void ide_sector_read_cb(void *opaque
, int ret
)
732 IDEState
*s
= opaque
;
736 s
->status
&= ~BUSY_STAT
;
739 if (ide_handle_rw_error(s
, -ret
, IDE_RETRY_PIO
|
745 block_acct_done(blk_get_stats(s
->blk
), &s
->acct
);
748 if (n
> s
->req_nb_sectors
) {
749 n
= s
->req_nb_sectors
;
752 ide_set_sector(s
, ide_get_sector(s
) + n
);
754 /* Allow the guest to read the io_buffer */
755 ide_transfer_start(s
, s
->io_buffer
, n
* BDRV_SECTOR_SIZE
, ide_sector_read
);
759 static void ide_sector_read(IDEState
*s
)
764 s
->status
= READY_STAT
| SEEK_STAT
;
765 s
->error
= 0; /* not needed by IDE spec, but needed by Windows */
766 sector_num
= ide_get_sector(s
);
770 ide_transfer_stop(s
);
774 s
->status
|= BUSY_STAT
;
776 if (n
> s
->req_nb_sectors
) {
777 n
= s
->req_nb_sectors
;
780 trace_ide_sector_read(sector_num
, n
);
782 if (!ide_sect_range_ok(s
, sector_num
, n
)) {
784 block_acct_invalid(blk_get_stats(s
->blk
), BLOCK_ACCT_READ
);
788 qemu_iovec_init_buf(&s
->qiov
, s
->io_buffer
, n
* BDRV_SECTOR_SIZE
);
790 block_acct_start(blk_get_stats(s
->blk
), &s
->acct
,
791 n
* BDRV_SECTOR_SIZE
, BLOCK_ACCT_READ
);
792 s
->pio_aiocb
= ide_buffered_readv(s
, sector_num
, &s
->qiov
, n
,
793 ide_sector_read_cb
, s
);
796 void dma_buf_commit(IDEState
*s
, uint32_t tx_bytes
)
798 if (s
->bus
->dma
->ops
->commit_buf
) {
799 s
->bus
->dma
->ops
->commit_buf(s
->bus
->dma
, tx_bytes
);
801 s
->io_buffer_offset
+= tx_bytes
;
802 qemu_sglist_destroy(&s
->sg
);
805 void ide_set_inactive(IDEState
*s
, bool more
)
807 s
->bus
->dma
->aiocb
= NULL
;
809 if (s
->bus
->dma
->ops
->set_inactive
) {
810 s
->bus
->dma
->ops
->set_inactive(s
->bus
->dma
, more
);
815 void ide_dma_error(IDEState
*s
)
817 dma_buf_commit(s
, 0);
818 ide_abort_command(s
);
819 ide_set_inactive(s
, false);
823 int ide_handle_rw_error(IDEState
*s
, int error
, int op
)
825 bool is_read
= (op
& IDE_RETRY_READ
) != 0;
826 BlockErrorAction action
= blk_get_error_action(s
->blk
, is_read
, error
);
828 if (action
== BLOCK_ERROR_ACTION_STOP
) {
829 assert(s
->bus
->retry_unit
== s
->unit
);
830 s
->bus
->error_status
= op
;
831 } else if (action
== BLOCK_ERROR_ACTION_REPORT
) {
832 block_acct_failed(blk_get_stats(s
->blk
), &s
->acct
);
833 if (IS_IDE_RETRY_DMA(op
)) {
835 } else if (IS_IDE_RETRY_ATAPI(op
)) {
836 ide_atapi_io_error(s
, -error
);
841 blk_error_action(s
->blk
, action
, is_read
, error
);
842 return action
!= BLOCK_ERROR_ACTION_IGNORE
;
845 static void ide_dma_cb(void *opaque
, int ret
)
847 IDEState
*s
= opaque
;
851 bool stay_active
= false;
852 int32_t prep_size
= 0;
854 if (ret
== -EINVAL
) {
860 if (ide_handle_rw_error(s
, -ret
, ide_dma_cmd_to_retry(s
->dma_cmd
))) {
861 s
->bus
->dma
->aiocb
= NULL
;
862 dma_buf_commit(s
, 0);
867 if (s
->io_buffer_size
> s
->nsector
* 512) {
869 * The PRDs were longer than needed for this request.
870 * The Active bit must remain set after the request completes.
875 n
= s
->io_buffer_size
>> 9;
878 sector_num
= ide_get_sector(s
);
880 assert(n
* 512 == s
->sg
.size
);
881 dma_buf_commit(s
, s
->sg
.size
);
883 ide_set_sector(s
, sector_num
);
887 /* end of transfer ? */
888 if (s
->nsector
== 0) {
889 s
->status
= READY_STAT
| SEEK_STAT
;
894 /* launch next transfer */
896 s
->io_buffer_index
= 0;
897 s
->io_buffer_size
= n
* 512;
898 prep_size
= s
->bus
->dma
->ops
->prepare_buf(s
->bus
->dma
, s
->io_buffer_size
);
899 /* prepare_buf() must succeed and respect the limit */
900 assert(prep_size
>= 0 && prep_size
<= n
* 512);
903 * Now prep_size stores the number of bytes in the sglist, and
904 * s->io_buffer_size stores the number of bytes described by the PRDs.
907 if (prep_size
< n
* 512) {
909 * The PRDs are too short for this request. Error condition!
910 * Reset the Active bit and don't raise the interrupt.
912 s
->status
= READY_STAT
| SEEK_STAT
;
913 dma_buf_commit(s
, 0);
917 trace_ide_dma_cb(s
, sector_num
, n
, IDE_DMA_CMD_str(s
->dma_cmd
));
919 if ((s
->dma_cmd
== IDE_DMA_READ
|| s
->dma_cmd
== IDE_DMA_WRITE
) &&
920 !ide_sect_range_ok(s
, sector_num
, n
)) {
922 block_acct_invalid(blk_get_stats(s
->blk
), s
->acct
.type
);
926 offset
= sector_num
<< BDRV_SECTOR_BITS
;
927 switch (s
->dma_cmd
) {
929 s
->bus
->dma
->aiocb
= dma_blk_read(s
->blk
, &s
->sg
, offset
,
930 BDRV_SECTOR_SIZE
, ide_dma_cb
, s
);
933 s
->bus
->dma
->aiocb
= dma_blk_write(s
->blk
, &s
->sg
, offset
,
934 BDRV_SECTOR_SIZE
, ide_dma_cb
, s
);
937 s
->bus
->dma
->aiocb
= dma_blk_io(blk_get_aio_context(s
->blk
),
938 &s
->sg
, offset
, BDRV_SECTOR_SIZE
,
939 ide_issue_trim
, s
, ide_dma_cb
, s
,
940 DMA_DIRECTION_TO_DEVICE
);
948 if (s
->dma_cmd
== IDE_DMA_READ
|| s
->dma_cmd
== IDE_DMA_WRITE
) {
949 block_acct_done(blk_get_stats(s
->blk
), &s
->acct
);
951 ide_set_inactive(s
, stay_active
);
954 static void ide_sector_start_dma(IDEState
*s
, enum ide_dma_cmd dma_cmd
)
956 s
->status
= READY_STAT
| SEEK_STAT
| DRQ_STAT
;
957 s
->io_buffer_size
= 0;
958 s
->dma_cmd
= dma_cmd
;
962 block_acct_start(blk_get_stats(s
->blk
), &s
->acct
,
963 s
->nsector
* BDRV_SECTOR_SIZE
, BLOCK_ACCT_READ
);
966 block_acct_start(blk_get_stats(s
->blk
), &s
->acct
,
967 s
->nsector
* BDRV_SECTOR_SIZE
, BLOCK_ACCT_WRITE
);
973 ide_start_dma(s
, ide_dma_cb
);
976 void ide_start_dma(IDEState
*s
, BlockCompletionFunc
*cb
)
978 s
->io_buffer_index
= 0;
980 if (s
->bus
->dma
->ops
->start_dma
) {
981 s
->bus
->dma
->ops
->start_dma(s
->bus
->dma
, s
, cb
);
985 static void ide_sector_write(IDEState
*s
);
987 static void ide_sector_write_timer_cb(void *opaque
)
989 IDEState
*s
= opaque
;
993 static void ide_sector_write_cb(void *opaque
, int ret
)
995 IDEState
*s
= opaque
;
999 s
->status
&= ~BUSY_STAT
;
1002 if (ide_handle_rw_error(s
, -ret
, IDE_RETRY_PIO
)) {
1007 block_acct_done(blk_get_stats(s
->blk
), &s
->acct
);
1010 if (n
> s
->req_nb_sectors
) {
1011 n
= s
->req_nb_sectors
;
1015 ide_set_sector(s
, ide_get_sector(s
) + n
);
1016 if (s
->nsector
== 0) {
1017 /* no more sectors to write */
1018 ide_transfer_stop(s
);
1020 int n1
= s
->nsector
;
1021 if (n1
> s
->req_nb_sectors
) {
1022 n1
= s
->req_nb_sectors
;
1024 ide_transfer_start(s
, s
->io_buffer
, n1
* BDRV_SECTOR_SIZE
,
1028 if (win2k_install_hack
&& ((++s
->irq_count
% 16) == 0)) {
1029 /* It seems there is a bug in the Windows 2000 installer HDD
1030 IDE driver which fills the disk with empty logs when the
1031 IDE write IRQ comes too early. This hack tries to correct
1032 that at the expense of slower write performances. Use this
1033 option _only_ to install Windows 2000. You must disable it
1035 timer_mod(s
->sector_write_timer
, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL
) +
1036 (NANOSECONDS_PER_SECOND
/ 1000));
1038 ide_set_irq(s
->bus
);
1042 static void ide_sector_write(IDEState
*s
)
1047 s
->status
= READY_STAT
| SEEK_STAT
| BUSY_STAT
;
1048 sector_num
= ide_get_sector(s
);
1051 if (n
> s
->req_nb_sectors
) {
1052 n
= s
->req_nb_sectors
;
1055 trace_ide_sector_write(sector_num
, n
);
1057 if (!ide_sect_range_ok(s
, sector_num
, n
)) {
1059 block_acct_invalid(blk_get_stats(s
->blk
), BLOCK_ACCT_WRITE
);
1063 qemu_iovec_init_buf(&s
->qiov
, s
->io_buffer
, n
* BDRV_SECTOR_SIZE
);
1065 block_acct_start(blk_get_stats(s
->blk
), &s
->acct
,
1066 n
* BDRV_SECTOR_SIZE
, BLOCK_ACCT_WRITE
);
1067 s
->pio_aiocb
= blk_aio_pwritev(s
->blk
, sector_num
<< BDRV_SECTOR_BITS
,
1068 &s
->qiov
, 0, ide_sector_write_cb
, s
);
1071 static void ide_flush_cb(void *opaque
, int ret
)
1073 IDEState
*s
= opaque
;
1075 s
->pio_aiocb
= NULL
;
1078 /* XXX: What sector number to set here? */
1079 if (ide_handle_rw_error(s
, -ret
, IDE_RETRY_FLUSH
)) {
1085 block_acct_done(blk_get_stats(s
->blk
), &s
->acct
);
1087 s
->status
= READY_STAT
| SEEK_STAT
;
1089 ide_set_irq(s
->bus
);
1092 static void ide_flush_cache(IDEState
*s
)
1094 if (s
->blk
== NULL
) {
1099 s
->status
|= BUSY_STAT
;
1101 block_acct_start(blk_get_stats(s
->blk
), &s
->acct
, 0, BLOCK_ACCT_FLUSH
);
1102 s
->pio_aiocb
= blk_aio_flush(s
->blk
, ide_flush_cb
, s
);
1105 static void ide_cfata_metadata_inquiry(IDEState
*s
)
1110 p
= (uint16_t *) s
->io_buffer
;
1111 memset(p
, 0, 0x200);
1112 spd
= ((s
->mdata_size
- 1) >> 9) + 1;
1114 put_le16(p
+ 0, 0x0001); /* Data format revision */
1115 put_le16(p
+ 1, 0x0000); /* Media property: silicon */
1116 put_le16(p
+ 2, s
->media_changed
); /* Media status */
1117 put_le16(p
+ 3, s
->mdata_size
& 0xffff); /* Capacity in bytes (low) */
1118 put_le16(p
+ 4, s
->mdata_size
>> 16); /* Capacity in bytes (high) */
1119 put_le16(p
+ 5, spd
& 0xffff); /* Sectors per device (low) */
1120 put_le16(p
+ 6, spd
>> 16); /* Sectors per device (high) */
1123 static void ide_cfata_metadata_read(IDEState
*s
)
1127 if (((s
->hcyl
<< 16) | s
->lcyl
) << 9 > s
->mdata_size
+ 2) {
1128 s
->status
= ERR_STAT
;
1129 s
->error
= ABRT_ERR
;
1133 p
= (uint16_t *) s
->io_buffer
;
1134 memset(p
, 0, 0x200);
1136 put_le16(p
+ 0, s
->media_changed
); /* Media status */
1137 memcpy(p
+ 1, s
->mdata_storage
+ (((s
->hcyl
<< 16) | s
->lcyl
) << 9),
1138 MIN(MIN(s
->mdata_size
- (((s
->hcyl
<< 16) | s
->lcyl
) << 9),
1139 s
->nsector
<< 9), 0x200 - 2));
1142 static void ide_cfata_metadata_write(IDEState
*s
)
1144 if (((s
->hcyl
<< 16) | s
->lcyl
) << 9 > s
->mdata_size
+ 2) {
1145 s
->status
= ERR_STAT
;
1146 s
->error
= ABRT_ERR
;
1150 s
->media_changed
= 0;
1152 memcpy(s
->mdata_storage
+ (((s
->hcyl
<< 16) | s
->lcyl
) << 9),
1154 MIN(MIN(s
->mdata_size
- (((s
->hcyl
<< 16) | s
->lcyl
) << 9),
1155 s
->nsector
<< 9), 0x200 - 2));
1158 /* called when the inserted state of the media has changed */
1159 static void ide_cd_change_cb(void *opaque
, bool load
, Error
**errp
)
1161 IDEState
*s
= opaque
;
1162 uint64_t nb_sectors
;
1164 s
->tray_open
= !load
;
1165 blk_get_geometry(s
->blk
, &nb_sectors
);
1166 s
->nb_sectors
= nb_sectors
;
1169 * First indicate to the guest that a CD has been removed. That's
1170 * done on the next command the guest sends us.
1172 * Then we set UNIT_ATTENTION, by which the guest will
1173 * detect a new CD in the drive. See ide_atapi_cmd() for details.
1175 s
->cdrom_changed
= 1;
1176 s
->events
.new_media
= true;
1177 s
->events
.eject_request
= false;
1178 ide_set_irq(s
->bus
);
1181 static void ide_cd_eject_request_cb(void *opaque
, bool force
)
1183 IDEState
*s
= opaque
;
1185 s
->events
.eject_request
= true;
1187 s
->tray_locked
= false;
1189 ide_set_irq(s
->bus
);
1192 static void ide_cmd_lba48_transform(IDEState
*s
, int lba48
)
1196 /* handle the 'magic' 0 nsector count conversion here. to avoid
1197 * fiddling with the rest of the read logic, we just store the
1198 * full sector count in ->nsector and ignore ->hob_nsector from now
1204 if (!s
->nsector
&& !s
->hob_nsector
)
1207 int lo
= s
->nsector
;
1208 int hi
= s
->hob_nsector
;
1210 s
->nsector
= (hi
<< 8) | lo
;
1215 static void ide_clear_hob(IDEBus
*bus
)
1217 /* any write clears HOB high bit of device control register */
1218 bus
->ifs
[0].select
&= ~(1 << 7);
1219 bus
->ifs
[1].select
&= ~(1 << 7);
1222 /* IOport [W]rite [R]egisters */
1223 enum ATA_IOPORT_WR
{
1224 ATA_IOPORT_WR_DATA
= 0,
1225 ATA_IOPORT_WR_FEATURES
= 1,
1226 ATA_IOPORT_WR_SECTOR_COUNT
= 2,
1227 ATA_IOPORT_WR_SECTOR_NUMBER
= 3,
1228 ATA_IOPORT_WR_CYLINDER_LOW
= 4,
1229 ATA_IOPORT_WR_CYLINDER_HIGH
= 5,
1230 ATA_IOPORT_WR_DEVICE_HEAD
= 6,
1231 ATA_IOPORT_WR_COMMAND
= 7,
1232 ATA_IOPORT_WR_NUM_REGISTERS
,
1235 const char *ATA_IOPORT_WR_lookup
[ATA_IOPORT_WR_NUM_REGISTERS
] = {
1236 [ATA_IOPORT_WR_DATA
] = "Data",
1237 [ATA_IOPORT_WR_FEATURES
] = "Features",
1238 [ATA_IOPORT_WR_SECTOR_COUNT
] = "Sector Count",
1239 [ATA_IOPORT_WR_SECTOR_NUMBER
] = "Sector Number",
1240 [ATA_IOPORT_WR_CYLINDER_LOW
] = "Cylinder Low",
1241 [ATA_IOPORT_WR_CYLINDER_HIGH
] = "Cylinder High",
1242 [ATA_IOPORT_WR_DEVICE_HEAD
] = "Device/Head",
1243 [ATA_IOPORT_WR_COMMAND
] = "Command"
1246 void ide_ioport_write(void *opaque
, uint32_t addr
, uint32_t val
)
1248 IDEBus
*bus
= opaque
;
1249 IDEState
*s
= idebus_active_if(bus
);
1250 int reg_num
= addr
& 7;
1252 trace_ide_ioport_write(addr
, ATA_IOPORT_WR_lookup
[reg_num
], val
, bus
, s
);
1254 /* ignore writes to command block while busy with previous command */
1255 if (reg_num
!= 7 && (s
->status
& (BUSY_STAT
|DRQ_STAT
))) {
1262 case ATA_IOPORT_WR_FEATURES
:
1264 /* NOTE: data is written to the two drives */
1265 bus
->ifs
[0].hob_feature
= bus
->ifs
[0].feature
;
1266 bus
->ifs
[1].hob_feature
= bus
->ifs
[1].feature
;
1267 bus
->ifs
[0].feature
= val
;
1268 bus
->ifs
[1].feature
= val
;
1270 case ATA_IOPORT_WR_SECTOR_COUNT
:
1272 bus
->ifs
[0].hob_nsector
= bus
->ifs
[0].nsector
;
1273 bus
->ifs
[1].hob_nsector
= bus
->ifs
[1].nsector
;
1274 bus
->ifs
[0].nsector
= val
;
1275 bus
->ifs
[1].nsector
= val
;
1277 case ATA_IOPORT_WR_SECTOR_NUMBER
:
1279 bus
->ifs
[0].hob_sector
= bus
->ifs
[0].sector
;
1280 bus
->ifs
[1].hob_sector
= bus
->ifs
[1].sector
;
1281 bus
->ifs
[0].sector
= val
;
1282 bus
->ifs
[1].sector
= val
;
1284 case ATA_IOPORT_WR_CYLINDER_LOW
:
1286 bus
->ifs
[0].hob_lcyl
= bus
->ifs
[0].lcyl
;
1287 bus
->ifs
[1].hob_lcyl
= bus
->ifs
[1].lcyl
;
1288 bus
->ifs
[0].lcyl
= val
;
1289 bus
->ifs
[1].lcyl
= val
;
1291 case ATA_IOPORT_WR_CYLINDER_HIGH
:
1293 bus
->ifs
[0].hob_hcyl
= bus
->ifs
[0].hcyl
;
1294 bus
->ifs
[1].hob_hcyl
= bus
->ifs
[1].hcyl
;
1295 bus
->ifs
[0].hcyl
= val
;
1296 bus
->ifs
[1].hcyl
= val
;
1298 case ATA_IOPORT_WR_DEVICE_HEAD
:
1299 /* FIXME: HOB readback uses bit 7 */
1300 bus
->ifs
[0].select
= (val
& ~0x10) | 0xa0;
1301 bus
->ifs
[1].select
= (val
| 0x10) | 0xa0;
1303 bus
->unit
= (val
>> 4) & 1;
1306 case ATA_IOPORT_WR_COMMAND
:
1308 ide_exec_cmd(bus
, val
);
1313 static void ide_reset(IDEState
*s
)
1318 blk_aio_cancel(s
->pio_aiocb
);
1319 s
->pio_aiocb
= NULL
;
1322 if (s
->drive_kind
== IDE_CFATA
)
1323 s
->mult_sectors
= 0;
1325 s
->mult_sectors
= MAX_MULT_SECTORS
;
1342 s
->status
= READY_STAT
| SEEK_STAT
;
1346 /* ATAPI specific */
1349 s
->cdrom_changed
= 0;
1350 s
->packet_transfer_size
= 0;
1351 s
->elementary_transfer_size
= 0;
1352 s
->io_buffer_index
= 0;
1353 s
->cd_sector_size
= 0;
1358 s
->io_buffer_size
= 0;
1359 s
->req_nb_sectors
= 0;
1361 ide_set_signature(s
);
1362 /* init the transfer handler so that 0xffff is returned on data
1364 s
->end_transfer_func
= ide_dummy_transfer_stop
;
1365 ide_dummy_transfer_stop(s
);
1366 s
->media_changed
= 0;
1369 static bool cmd_nop(IDEState
*s
, uint8_t cmd
)
1374 static bool cmd_device_reset(IDEState
*s
, uint8_t cmd
)
1376 /* Halt PIO (in the DRQ phase), then DMA */
1377 ide_transfer_halt(s
);
1378 ide_cancel_dma_sync(s
);
1380 /* Reset any PIO commands, reset signature, etc */
1383 /* RESET: ATA8-ACS3 7.10.4 "Normal Outputs";
1384 * ATA8-ACS3 Table 184 "Device Signatures for Normal Output" */
1387 /* Do not overwrite status register */
1391 static bool cmd_data_set_management(IDEState
*s
, uint8_t cmd
)
1393 switch (s
->feature
) {
1396 ide_sector_start_dma(s
, IDE_DMA_TRIM
);
1402 ide_abort_command(s
);
1406 static bool cmd_identify(IDEState
*s
, uint8_t cmd
)
1408 if (s
->blk
&& s
->drive_kind
!= IDE_CD
) {
1409 if (s
->drive_kind
!= IDE_CFATA
) {
1412 ide_cfata_identify(s
);
1414 s
->status
= READY_STAT
| SEEK_STAT
;
1415 ide_transfer_start(s
, s
->io_buffer
, 512, ide_transfer_stop
);
1416 ide_set_irq(s
->bus
);
1419 if (s
->drive_kind
== IDE_CD
) {
1420 ide_set_signature(s
);
1422 ide_abort_command(s
);
1428 static bool cmd_verify(IDEState
*s
, uint8_t cmd
)
1430 bool lba48
= (cmd
== WIN_VERIFY_EXT
);
1432 /* do sector number check ? */
1433 ide_cmd_lba48_transform(s
, lba48
);
1438 static bool cmd_set_multiple_mode(IDEState
*s
, uint8_t cmd
)
1440 if (s
->drive_kind
== IDE_CFATA
&& s
->nsector
== 0) {
1441 /* Disable Read and Write Multiple */
1442 s
->mult_sectors
= 0;
1443 } else if ((s
->nsector
& 0xff) != 0 &&
1444 ((s
->nsector
& 0xff) > MAX_MULT_SECTORS
||
1445 (s
->nsector
& (s
->nsector
- 1)) != 0)) {
1446 ide_abort_command(s
);
1448 s
->mult_sectors
= s
->nsector
& 0xff;
1454 static bool cmd_read_multiple(IDEState
*s
, uint8_t cmd
)
1456 bool lba48
= (cmd
== WIN_MULTREAD_EXT
);
1458 if (!s
->blk
|| !s
->mult_sectors
) {
1459 ide_abort_command(s
);
1463 ide_cmd_lba48_transform(s
, lba48
);
1464 s
->req_nb_sectors
= s
->mult_sectors
;
1469 static bool cmd_write_multiple(IDEState
*s
, uint8_t cmd
)
1471 bool lba48
= (cmd
== WIN_MULTWRITE_EXT
);
1474 if (!s
->blk
|| !s
->mult_sectors
) {
1475 ide_abort_command(s
);
1479 ide_cmd_lba48_transform(s
, lba48
);
1481 s
->req_nb_sectors
= s
->mult_sectors
;
1482 n
= MIN(s
->nsector
, s
->req_nb_sectors
);
1484 s
->status
= SEEK_STAT
| READY_STAT
;
1485 ide_transfer_start(s
, s
->io_buffer
, 512 * n
, ide_sector_write
);
1487 s
->media_changed
= 1;
1492 static bool cmd_read_pio(IDEState
*s
, uint8_t cmd
)
1494 bool lba48
= (cmd
== WIN_READ_EXT
);
1496 if (s
->drive_kind
== IDE_CD
) {
1497 ide_set_signature(s
); /* odd, but ATA4 8.27.5.2 requires it */
1498 ide_abort_command(s
);
1503 ide_abort_command(s
);
1507 ide_cmd_lba48_transform(s
, lba48
);
1508 s
->req_nb_sectors
= 1;
1514 static bool cmd_write_pio(IDEState
*s
, uint8_t cmd
)
1516 bool lba48
= (cmd
== WIN_WRITE_EXT
);
1519 ide_abort_command(s
);
1523 ide_cmd_lba48_transform(s
, lba48
);
1525 s
->req_nb_sectors
= 1;
1526 s
->status
= SEEK_STAT
| READY_STAT
;
1527 ide_transfer_start(s
, s
->io_buffer
, 512, ide_sector_write
);
1529 s
->media_changed
= 1;
1534 static bool cmd_read_dma(IDEState
*s
, uint8_t cmd
)
1536 bool lba48
= (cmd
== WIN_READDMA_EXT
);
1539 ide_abort_command(s
);
1543 ide_cmd_lba48_transform(s
, lba48
);
1544 ide_sector_start_dma(s
, IDE_DMA_READ
);
1549 static bool cmd_write_dma(IDEState
*s
, uint8_t cmd
)
1551 bool lba48
= (cmd
== WIN_WRITEDMA_EXT
);
1554 ide_abort_command(s
);
1558 ide_cmd_lba48_transform(s
, lba48
);
1559 ide_sector_start_dma(s
, IDE_DMA_WRITE
);
1561 s
->media_changed
= 1;
1566 static bool cmd_flush_cache(IDEState
*s
, uint8_t cmd
)
1572 static bool cmd_seek(IDEState
*s
, uint8_t cmd
)
1574 /* XXX: Check that seek is within bounds */
1578 static bool cmd_read_native_max(IDEState
*s
, uint8_t cmd
)
1580 bool lba48
= (cmd
== WIN_READ_NATIVE_MAX_EXT
);
1582 /* Refuse if no sectors are addressable (e.g. medium not inserted) */
1583 if (s
->nb_sectors
== 0) {
1584 ide_abort_command(s
);
1588 ide_cmd_lba48_transform(s
, lba48
);
1589 ide_set_sector(s
, s
->nb_sectors
- 1);
1594 static bool cmd_check_power_mode(IDEState
*s
, uint8_t cmd
)
1596 s
->nsector
= 0xff; /* device active or idle */
1600 static bool cmd_set_features(IDEState
*s
, uint8_t cmd
)
1602 uint16_t *identify_data
;
1605 ide_abort_command(s
);
1609 /* XXX: valid for CDROM ? */
1610 switch (s
->feature
) {
1611 case 0x02: /* write cache enable */
1612 blk_set_enable_write_cache(s
->blk
, true);
1613 identify_data
= (uint16_t *)s
->identify_data
;
1614 put_le16(identify_data
+ 85, (1 << 14) | (1 << 5) | 1);
1616 case 0x82: /* write cache disable */
1617 blk_set_enable_write_cache(s
->blk
, false);
1618 identify_data
= (uint16_t *)s
->identify_data
;
1619 put_le16(identify_data
+ 85, (1 << 14) | 1);
1622 case 0xcc: /* reverting to power-on defaults enable */
1623 case 0x66: /* reverting to power-on defaults disable */
1624 case 0xaa: /* read look-ahead enable */
1625 case 0x55: /* read look-ahead disable */
1626 case 0x05: /* set advanced power management mode */
1627 case 0x85: /* disable advanced power management mode */
1628 case 0x69: /* NOP */
1629 case 0x67: /* NOP */
1630 case 0x96: /* NOP */
1631 case 0x9a: /* NOP */
1632 case 0x42: /* enable Automatic Acoustic Mode */
1633 case 0xc2: /* disable Automatic Acoustic Mode */
1635 case 0x03: /* set transfer mode */
1637 uint8_t val
= s
->nsector
& 0x07;
1638 identify_data
= (uint16_t *)s
->identify_data
;
1640 switch (s
->nsector
>> 3) {
1641 case 0x00: /* pio default */
1642 case 0x01: /* pio mode */
1643 put_le16(identify_data
+ 62, 0x07);
1644 put_le16(identify_data
+ 63, 0x07);
1645 put_le16(identify_data
+ 88, 0x3f);
1647 case 0x02: /* sigle word dma mode*/
1648 put_le16(identify_data
+ 62, 0x07 | (1 << (val
+ 8)));
1649 put_le16(identify_data
+ 63, 0x07);
1650 put_le16(identify_data
+ 88, 0x3f);
1652 case 0x04: /* mdma mode */
1653 put_le16(identify_data
+ 62, 0x07);
1654 put_le16(identify_data
+ 63, 0x07 | (1 << (val
+ 8)));
1655 put_le16(identify_data
+ 88, 0x3f);
1657 case 0x08: /* udma mode */
1658 put_le16(identify_data
+ 62, 0x07);
1659 put_le16(identify_data
+ 63, 0x07);
1660 put_le16(identify_data
+ 88, 0x3f | (1 << (val
+ 8)));
1670 ide_abort_command(s
);
1675 /*** ATAPI commands ***/
1677 static bool cmd_identify_packet(IDEState
*s
, uint8_t cmd
)
1679 ide_atapi_identify(s
);
1680 s
->status
= READY_STAT
| SEEK_STAT
;
1681 ide_transfer_start(s
, s
->io_buffer
, 512, ide_transfer_stop
);
1682 ide_set_irq(s
->bus
);
1686 static bool cmd_exec_dev_diagnostic(IDEState
*s
, uint8_t cmd
)
1688 ide_set_signature(s
);
1690 if (s
->drive_kind
== IDE_CD
) {
1691 s
->status
= 0; /* ATAPI spec (v6) section 9.10 defines packet
1692 * devices to return a clear status register
1693 * with READY_STAT *not* set. */
1696 s
->status
= READY_STAT
| SEEK_STAT
;
1697 /* The bits of the error register are not as usual for this command!
1698 * They are part of the regular output (this is why ERR_STAT isn't set)
1699 * Device 0 passed, Device 1 passed or not present. */
1701 ide_set_irq(s
->bus
);
1707 static bool cmd_packet(IDEState
*s
, uint8_t cmd
)
1709 /* overlapping commands not supported */
1710 if (s
->feature
& 0x02) {
1711 ide_abort_command(s
);
1715 s
->status
= READY_STAT
| SEEK_STAT
;
1716 s
->atapi_dma
= s
->feature
& 1;
1718 s
->dma_cmd
= IDE_DMA_ATAPI
;
1721 ide_transfer_start(s
, s
->io_buffer
, ATAPI_PACKET_SIZE
,
1727 /*** CF-ATA commands ***/
1729 static bool cmd_cfa_req_ext_error_code(IDEState
*s
, uint8_t cmd
)
1731 s
->error
= 0x09; /* miscellaneous error */
1732 s
->status
= READY_STAT
| SEEK_STAT
;
1733 ide_set_irq(s
->bus
);
1738 static bool cmd_cfa_erase_sectors(IDEState
*s
, uint8_t cmd
)
1740 /* WIN_SECURITY_FREEZE_LOCK has the same ID as CFA_WEAR_LEVEL and is
1741 * required for Windows 8 to work with AHCI */
1743 if (cmd
== CFA_WEAR_LEVEL
) {
1747 if (cmd
== CFA_ERASE_SECTORS
) {
1748 s
->media_changed
= 1;
1754 static bool cmd_cfa_translate_sector(IDEState
*s
, uint8_t cmd
)
1756 s
->status
= READY_STAT
| SEEK_STAT
;
1758 memset(s
->io_buffer
, 0, 0x200);
1759 s
->io_buffer
[0x00] = s
->hcyl
; /* Cyl MSB */
1760 s
->io_buffer
[0x01] = s
->lcyl
; /* Cyl LSB */
1761 s
->io_buffer
[0x02] = s
->select
; /* Head */
1762 s
->io_buffer
[0x03] = s
->sector
; /* Sector */
1763 s
->io_buffer
[0x04] = ide_get_sector(s
) >> 16; /* LBA MSB */
1764 s
->io_buffer
[0x05] = ide_get_sector(s
) >> 8; /* LBA */
1765 s
->io_buffer
[0x06] = ide_get_sector(s
) >> 0; /* LBA LSB */
1766 s
->io_buffer
[0x13] = 0x00; /* Erase flag */
1767 s
->io_buffer
[0x18] = 0x00; /* Hot count */
1768 s
->io_buffer
[0x19] = 0x00; /* Hot count */
1769 s
->io_buffer
[0x1a] = 0x01; /* Hot count */
1771 ide_transfer_start(s
, s
->io_buffer
, 0x200, ide_transfer_stop
);
1772 ide_set_irq(s
->bus
);
1777 static bool cmd_cfa_access_metadata_storage(IDEState
*s
, uint8_t cmd
)
1779 switch (s
->feature
) {
1780 case 0x02: /* Inquiry Metadata Storage */
1781 ide_cfata_metadata_inquiry(s
);
1783 case 0x03: /* Read Metadata Storage */
1784 ide_cfata_metadata_read(s
);
1786 case 0x04: /* Write Metadata Storage */
1787 ide_cfata_metadata_write(s
);
1790 ide_abort_command(s
);
1794 ide_transfer_start(s
, s
->io_buffer
, 0x200, ide_transfer_stop
);
1795 s
->status
= 0x00; /* NOTE: READY is _not_ set */
1796 ide_set_irq(s
->bus
);
1801 static bool cmd_ibm_sense_condition(IDEState
*s
, uint8_t cmd
)
1803 switch (s
->feature
) {
1804 case 0x01: /* sense temperature in device */
1805 s
->nsector
= 0x50; /* +20 C */
1808 ide_abort_command(s
);
1816 /*** SMART commands ***/
1818 static bool cmd_smart(IDEState
*s
, uint8_t cmd
)
1822 if (s
->hcyl
!= 0xc2 || s
->lcyl
!= 0x4f) {
1826 if (!s
->smart_enabled
&& s
->feature
!= SMART_ENABLE
) {
1830 switch (s
->feature
) {
1832 s
->smart_enabled
= 0;
1836 s
->smart_enabled
= 1;
1839 case SMART_ATTR_AUTOSAVE
:
1840 switch (s
->sector
) {
1842 s
->smart_autosave
= 0;
1845 s
->smart_autosave
= 1;
1853 if (!s
->smart_errors
) {
1862 case SMART_READ_THRESH
:
1863 memset(s
->io_buffer
, 0, 0x200);
1864 s
->io_buffer
[0] = 0x01; /* smart struct version */
1866 for (n
= 0; n
< ARRAY_SIZE(smart_attributes
); n
++) {
1867 s
->io_buffer
[2 + 0 + (n
* 12)] = smart_attributes
[n
][0];
1868 s
->io_buffer
[2 + 1 + (n
* 12)] = smart_attributes
[n
][11];
1872 for (n
= 0; n
< 511; n
++) {
1873 s
->io_buffer
[511] += s
->io_buffer
[n
];
1875 s
->io_buffer
[511] = 0x100 - s
->io_buffer
[511];
1877 s
->status
= READY_STAT
| SEEK_STAT
;
1878 ide_transfer_start(s
, s
->io_buffer
, 0x200, ide_transfer_stop
);
1879 ide_set_irq(s
->bus
);
1882 case SMART_READ_DATA
:
1883 memset(s
->io_buffer
, 0, 0x200);
1884 s
->io_buffer
[0] = 0x01; /* smart struct version */
1886 for (n
= 0; n
< ARRAY_SIZE(smart_attributes
); n
++) {
1888 for (i
= 0; i
< 11; i
++) {
1889 s
->io_buffer
[2 + i
+ (n
* 12)] = smart_attributes
[n
][i
];
1893 s
->io_buffer
[362] = 0x02 | (s
->smart_autosave
? 0x80 : 0x00);
1894 if (s
->smart_selftest_count
== 0) {
1895 s
->io_buffer
[363] = 0;
1898 s
->smart_selftest_data
[3 +
1899 (s
->smart_selftest_count
- 1) *
1902 s
->io_buffer
[364] = 0x20;
1903 s
->io_buffer
[365] = 0x01;
1904 /* offline data collection capacity: execute + self-test*/
1905 s
->io_buffer
[367] = (1 << 4 | 1 << 3 | 1);
1906 s
->io_buffer
[368] = 0x03; /* smart capability (1) */
1907 s
->io_buffer
[369] = 0x00; /* smart capability (2) */
1908 s
->io_buffer
[370] = 0x01; /* error logging supported */
1909 s
->io_buffer
[372] = 0x02; /* minutes for poll short test */
1910 s
->io_buffer
[373] = 0x36; /* minutes for poll ext test */
1911 s
->io_buffer
[374] = 0x01; /* minutes for poll conveyance */
1913 for (n
= 0; n
< 511; n
++) {
1914 s
->io_buffer
[511] += s
->io_buffer
[n
];
1916 s
->io_buffer
[511] = 0x100 - s
->io_buffer
[511];
1918 s
->status
= READY_STAT
| SEEK_STAT
;
1919 ide_transfer_start(s
, s
->io_buffer
, 0x200, ide_transfer_stop
);
1920 ide_set_irq(s
->bus
);
1923 case SMART_READ_LOG
:
1924 switch (s
->sector
) {
1925 case 0x01: /* summary smart error log */
1926 memset(s
->io_buffer
, 0, 0x200);
1927 s
->io_buffer
[0] = 0x01;
1928 s
->io_buffer
[1] = 0x00; /* no error entries */
1929 s
->io_buffer
[452] = s
->smart_errors
& 0xff;
1930 s
->io_buffer
[453] = (s
->smart_errors
& 0xff00) >> 8;
1932 for (n
= 0; n
< 511; n
++) {
1933 s
->io_buffer
[511] += s
->io_buffer
[n
];
1935 s
->io_buffer
[511] = 0x100 - s
->io_buffer
[511];
1937 case 0x06: /* smart self test log */
1938 memset(s
->io_buffer
, 0, 0x200);
1939 s
->io_buffer
[0] = 0x01;
1940 if (s
->smart_selftest_count
== 0) {
1941 s
->io_buffer
[508] = 0;
1943 s
->io_buffer
[508] = s
->smart_selftest_count
;
1944 for (n
= 2; n
< 506; n
++) {
1945 s
->io_buffer
[n
] = s
->smart_selftest_data
[n
];
1949 for (n
= 0; n
< 511; n
++) {
1950 s
->io_buffer
[511] += s
->io_buffer
[n
];
1952 s
->io_buffer
[511] = 0x100 - s
->io_buffer
[511];
1957 s
->status
= READY_STAT
| SEEK_STAT
;
1958 ide_transfer_start(s
, s
->io_buffer
, 0x200, ide_transfer_stop
);
1959 ide_set_irq(s
->bus
);
1962 case SMART_EXECUTE_OFFLINE
:
1963 switch (s
->sector
) {
1964 case 0: /* off-line routine */
1965 case 1: /* short self test */
1966 case 2: /* extended self test */
1967 s
->smart_selftest_count
++;
1968 if (s
->smart_selftest_count
> 21) {
1969 s
->smart_selftest_count
= 1;
1971 n
= 2 + (s
->smart_selftest_count
- 1) * 24;
1972 s
->smart_selftest_data
[n
] = s
->sector
;
1973 s
->smart_selftest_data
[n
+ 1] = 0x00; /* OK and finished */
1974 s
->smart_selftest_data
[n
+ 2] = 0x34; /* hour count lsb */
1975 s
->smart_selftest_data
[n
+ 3] = 0x12; /* hour count msb */
1984 ide_abort_command(s
);
1988 #define HD_OK (1u << IDE_HD)
1989 #define CD_OK (1u << IDE_CD)
1990 #define CFA_OK (1u << IDE_CFATA)
1991 #define HD_CFA_OK (HD_OK | CFA_OK)
1992 #define ALL_OK (HD_OK | CD_OK | CFA_OK)
1994 /* Set the Disk Seek Completed status bit during completion */
1995 #define SET_DSC (1u << 8)
1997 /* See ACS-2 T13/2015-D Table B.2 Command codes */
1998 static const struct {
1999 /* Returns true if the completion code should be run */
2000 bool (*handler
)(IDEState
*s
, uint8_t cmd
);
2002 } ide_cmd_table
[0x100] = {
2003 /* NOP not implemented, mandatory for CD */
2004 [CFA_REQ_EXT_ERROR_CODE
] = { cmd_cfa_req_ext_error_code
, CFA_OK
},
2005 [WIN_DSM
] = { cmd_data_set_management
, HD_CFA_OK
},
2006 [WIN_DEVICE_RESET
] = { cmd_device_reset
, CD_OK
},
2007 [WIN_RECAL
] = { cmd_nop
, HD_CFA_OK
| SET_DSC
},
2008 [WIN_READ
] = { cmd_read_pio
, ALL_OK
},
2009 [WIN_READ_ONCE
] = { cmd_read_pio
, HD_CFA_OK
},
2010 [WIN_READ_EXT
] = { cmd_read_pio
, HD_CFA_OK
},
2011 [WIN_READDMA_EXT
] = { cmd_read_dma
, HD_CFA_OK
},
2012 [WIN_READ_NATIVE_MAX_EXT
] = { cmd_read_native_max
, HD_CFA_OK
| SET_DSC
},
2013 [WIN_MULTREAD_EXT
] = { cmd_read_multiple
, HD_CFA_OK
},
2014 [WIN_WRITE
] = { cmd_write_pio
, HD_CFA_OK
},
2015 [WIN_WRITE_ONCE
] = { cmd_write_pio
, HD_CFA_OK
},
2016 [WIN_WRITE_EXT
] = { cmd_write_pio
, HD_CFA_OK
},
2017 [WIN_WRITEDMA_EXT
] = { cmd_write_dma
, HD_CFA_OK
},
2018 [CFA_WRITE_SECT_WO_ERASE
] = { cmd_write_pio
, CFA_OK
},
2019 [WIN_MULTWRITE_EXT
] = { cmd_write_multiple
, HD_CFA_OK
},
2020 [WIN_WRITE_VERIFY
] = { cmd_write_pio
, HD_CFA_OK
},
2021 [WIN_VERIFY
] = { cmd_verify
, HD_CFA_OK
| SET_DSC
},
2022 [WIN_VERIFY_ONCE
] = { cmd_verify
, HD_CFA_OK
| SET_DSC
},
2023 [WIN_VERIFY_EXT
] = { cmd_verify
, HD_CFA_OK
| SET_DSC
},
2024 [WIN_SEEK
] = { cmd_seek
, HD_CFA_OK
| SET_DSC
},
2025 [CFA_TRANSLATE_SECTOR
] = { cmd_cfa_translate_sector
, CFA_OK
},
2026 [WIN_DIAGNOSE
] = { cmd_exec_dev_diagnostic
, ALL_OK
},
2027 [WIN_SPECIFY
] = { cmd_nop
, HD_CFA_OK
| SET_DSC
},
2028 [WIN_STANDBYNOW2
] = { cmd_nop
, HD_CFA_OK
},
2029 [WIN_IDLEIMMEDIATE2
] = { cmd_nop
, HD_CFA_OK
},
2030 [WIN_STANDBY2
] = { cmd_nop
, HD_CFA_OK
},
2031 [WIN_SETIDLE2
] = { cmd_nop
, HD_CFA_OK
},
2032 [WIN_CHECKPOWERMODE2
] = { cmd_check_power_mode
, HD_CFA_OK
| SET_DSC
},
2033 [WIN_SLEEPNOW2
] = { cmd_nop
, HD_CFA_OK
},
2034 [WIN_PACKETCMD
] = { cmd_packet
, CD_OK
},
2035 [WIN_PIDENTIFY
] = { cmd_identify_packet
, CD_OK
},
2036 [WIN_SMART
] = { cmd_smart
, HD_CFA_OK
| SET_DSC
},
2037 [CFA_ACCESS_METADATA_STORAGE
] = { cmd_cfa_access_metadata_storage
, CFA_OK
},
2038 [CFA_ERASE_SECTORS
] = { cmd_cfa_erase_sectors
, CFA_OK
| SET_DSC
},
2039 [WIN_MULTREAD
] = { cmd_read_multiple
, HD_CFA_OK
},
2040 [WIN_MULTWRITE
] = { cmd_write_multiple
, HD_CFA_OK
},
2041 [WIN_SETMULT
] = { cmd_set_multiple_mode
, HD_CFA_OK
| SET_DSC
},
2042 [WIN_READDMA
] = { cmd_read_dma
, HD_CFA_OK
},
2043 [WIN_READDMA_ONCE
] = { cmd_read_dma
, HD_CFA_OK
},
2044 [WIN_WRITEDMA
] = { cmd_write_dma
, HD_CFA_OK
},
2045 [WIN_WRITEDMA_ONCE
] = { cmd_write_dma
, HD_CFA_OK
},
2046 [CFA_WRITE_MULTI_WO_ERASE
] = { cmd_write_multiple
, CFA_OK
},
2047 [WIN_STANDBYNOW1
] = { cmd_nop
, HD_CFA_OK
},
2048 [WIN_IDLEIMMEDIATE
] = { cmd_nop
, HD_CFA_OK
},
2049 [WIN_STANDBY
] = { cmd_nop
, HD_CFA_OK
},
2050 [WIN_SETIDLE1
] = { cmd_nop
, HD_CFA_OK
},
2051 [WIN_CHECKPOWERMODE1
] = { cmd_check_power_mode
, HD_CFA_OK
| SET_DSC
},
2052 [WIN_SLEEPNOW1
] = { cmd_nop
, HD_CFA_OK
},
2053 [WIN_FLUSH_CACHE
] = { cmd_flush_cache
, ALL_OK
},
2054 [WIN_FLUSH_CACHE_EXT
] = { cmd_flush_cache
, HD_CFA_OK
},
2055 [WIN_IDENTIFY
] = { cmd_identify
, ALL_OK
},
2056 [WIN_SETFEATURES
] = { cmd_set_features
, ALL_OK
| SET_DSC
},
2057 [IBM_SENSE_CONDITION
] = { cmd_ibm_sense_condition
, CFA_OK
| SET_DSC
},
2058 [CFA_WEAR_LEVEL
] = { cmd_cfa_erase_sectors
, HD_CFA_OK
| SET_DSC
},
2059 [WIN_READ_NATIVE_MAX
] = { cmd_read_native_max
, HD_CFA_OK
| SET_DSC
},
2062 static bool ide_cmd_permitted(IDEState
*s
, uint32_t cmd
)
2064 return cmd
< ARRAY_SIZE(ide_cmd_table
)
2065 && (ide_cmd_table
[cmd
].flags
& (1u << s
->drive_kind
));
2068 void ide_exec_cmd(IDEBus
*bus
, uint32_t val
)
2073 s
= idebus_active_if(bus
);
2074 trace_ide_exec_cmd(bus
, s
, val
);
2076 /* ignore commands to non existent slave */
2077 if (s
!= bus
->ifs
&& !s
->blk
) {
2081 /* Only RESET is allowed while BSY and/or DRQ are set,
2082 * and only to ATAPI devices. */
2083 if (s
->status
& (BUSY_STAT
|DRQ_STAT
)) {
2084 if (val
!= WIN_DEVICE_RESET
|| s
->drive_kind
!= IDE_CD
) {
2089 if (!ide_cmd_permitted(s
, val
)) {
2090 ide_abort_command(s
);
2091 ide_set_irq(s
->bus
);
2095 s
->status
= READY_STAT
| BUSY_STAT
;
2097 s
->io_buffer_offset
= 0;
2099 complete
= ide_cmd_table
[val
].handler(s
, val
);
2101 s
->status
&= ~BUSY_STAT
;
2102 assert(!!s
->error
== !!(s
->status
& ERR_STAT
));
2104 if ((ide_cmd_table
[val
].flags
& SET_DSC
) && !s
->error
) {
2105 s
->status
|= SEEK_STAT
;
2109 ide_set_irq(s
->bus
);
2113 /* IOport [R]ead [R]egisters */
2114 enum ATA_IOPORT_RR
{
2115 ATA_IOPORT_RR_DATA
= 0,
2116 ATA_IOPORT_RR_ERROR
= 1,
2117 ATA_IOPORT_RR_SECTOR_COUNT
= 2,
2118 ATA_IOPORT_RR_SECTOR_NUMBER
= 3,
2119 ATA_IOPORT_RR_CYLINDER_LOW
= 4,
2120 ATA_IOPORT_RR_CYLINDER_HIGH
= 5,
2121 ATA_IOPORT_RR_DEVICE_HEAD
= 6,
2122 ATA_IOPORT_RR_STATUS
= 7,
2123 ATA_IOPORT_RR_NUM_REGISTERS
,
2126 const char *ATA_IOPORT_RR_lookup
[ATA_IOPORT_RR_NUM_REGISTERS
] = {
2127 [ATA_IOPORT_RR_DATA
] = "Data",
2128 [ATA_IOPORT_RR_ERROR
] = "Error",
2129 [ATA_IOPORT_RR_SECTOR_COUNT
] = "Sector Count",
2130 [ATA_IOPORT_RR_SECTOR_NUMBER
] = "Sector Number",
2131 [ATA_IOPORT_RR_CYLINDER_LOW
] = "Cylinder Low",
2132 [ATA_IOPORT_RR_CYLINDER_HIGH
] = "Cylinder High",
2133 [ATA_IOPORT_RR_DEVICE_HEAD
] = "Device/Head",
2134 [ATA_IOPORT_RR_STATUS
] = "Status"
2137 uint32_t ide_ioport_read(void *opaque
, uint32_t addr
)
2139 IDEBus
*bus
= opaque
;
2140 IDEState
*s
= idebus_active_if(bus
);
2145 /* FIXME: HOB readback uses bit 7, but it's always set right now */
2146 //hob = s->select & (1 << 7);
2149 case ATA_IOPORT_RR_DATA
:
2152 case ATA_IOPORT_RR_ERROR
:
2153 if ((!bus
->ifs
[0].blk
&& !bus
->ifs
[1].blk
) ||
2154 (s
!= bus
->ifs
&& !s
->blk
)) {
2159 ret
= s
->hob_feature
;
2162 case ATA_IOPORT_RR_SECTOR_COUNT
:
2163 if (!bus
->ifs
[0].blk
&& !bus
->ifs
[1].blk
) {
2166 ret
= s
->nsector
& 0xff;
2168 ret
= s
->hob_nsector
;
2171 case ATA_IOPORT_RR_SECTOR_NUMBER
:
2172 if (!bus
->ifs
[0].blk
&& !bus
->ifs
[1].blk
) {
2177 ret
= s
->hob_sector
;
2180 case ATA_IOPORT_RR_CYLINDER_LOW
:
2181 if (!bus
->ifs
[0].blk
&& !bus
->ifs
[1].blk
) {
2189 case ATA_IOPORT_RR_CYLINDER_HIGH
:
2190 if (!bus
->ifs
[0].blk
&& !bus
->ifs
[1].blk
) {
2198 case ATA_IOPORT_RR_DEVICE_HEAD
:
2199 if (!bus
->ifs
[0].blk
&& !bus
->ifs
[1].blk
) {
2206 case ATA_IOPORT_RR_STATUS
:
2207 if ((!bus
->ifs
[0].blk
&& !bus
->ifs
[1].blk
) ||
2208 (s
!= bus
->ifs
&& !s
->blk
)) {
2213 qemu_irq_lower(bus
->irq
);
2217 trace_ide_ioport_read(addr
, ATA_IOPORT_RR_lookup
[reg_num
], ret
, bus
, s
);
2221 uint32_t ide_status_read(void *opaque
, uint32_t addr
)
2223 IDEBus
*bus
= opaque
;
2224 IDEState
*s
= idebus_active_if(bus
);
2227 if ((!bus
->ifs
[0].blk
&& !bus
->ifs
[1].blk
) ||
2228 (s
!= bus
->ifs
&& !s
->blk
)) {
2234 trace_ide_status_read(addr
, ret
, bus
, s
);
2238 void ide_cmd_write(void *opaque
, uint32_t addr
, uint32_t val
)
2240 IDEBus
*bus
= opaque
;
2244 trace_ide_cmd_write(addr
, val
, bus
);
2246 /* common for both drives */
2247 if (!(bus
->cmd
& IDE_CMD_RESET
) &&
2248 (val
& IDE_CMD_RESET
)) {
2249 /* reset low to high */
2250 for(i
= 0;i
< 2; i
++) {
2252 s
->status
= BUSY_STAT
| SEEK_STAT
;
2255 } else if ((bus
->cmd
& IDE_CMD_RESET
) &&
2256 !(val
& IDE_CMD_RESET
)) {
2258 for(i
= 0;i
< 2; i
++) {
2260 if (s
->drive_kind
== IDE_CD
)
2261 s
->status
= 0x00; /* NOTE: READY is _not_ set */
2263 s
->status
= READY_STAT
| SEEK_STAT
;
2264 ide_set_signature(s
);
2272 * Returns true if the running PIO transfer is a PIO out (i.e. data is
2273 * transferred from the device to the guest), false if it's a PIO in
2275 static bool ide_is_pio_out(IDEState
*s
)
2277 if (s
->end_transfer_func
== ide_sector_write
||
2278 s
->end_transfer_func
== ide_atapi_cmd
) {
2280 } else if (s
->end_transfer_func
== ide_sector_read
||
2281 s
->end_transfer_func
== ide_transfer_stop
||
2282 s
->end_transfer_func
== ide_atapi_cmd_reply_end
||
2283 s
->end_transfer_func
== ide_dummy_transfer_stop
) {
2290 void ide_data_writew(void *opaque
, uint32_t addr
, uint32_t val
)
2292 IDEBus
*bus
= opaque
;
2293 IDEState
*s
= idebus_active_if(bus
);
2296 trace_ide_data_writew(addr
, val
, bus
, s
);
2298 /* PIO data access allowed only when DRQ bit is set. The result of a write
2299 * during PIO out is indeterminate, just ignore it. */
2300 if (!(s
->status
& DRQ_STAT
) || ide_is_pio_out(s
)) {
2305 if (p
+ 2 > s
->data_end
) {
2309 *(uint16_t *)p
= le16_to_cpu(val
);
2312 if (p
>= s
->data_end
) {
2313 s
->status
&= ~DRQ_STAT
;
2314 s
->end_transfer_func(s
);
2318 uint32_t ide_data_readw(void *opaque
, uint32_t addr
)
2320 IDEBus
*bus
= opaque
;
2321 IDEState
*s
= idebus_active_if(bus
);
2325 /* PIO data access allowed only when DRQ bit is set. The result of a read
2326 * during PIO in is indeterminate, return 0 and don't move forward. */
2327 if (!(s
->status
& DRQ_STAT
) || !ide_is_pio_out(s
)) {
2332 if (p
+ 2 > s
->data_end
) {
2336 ret
= cpu_to_le16(*(uint16_t *)p
);
2339 if (p
>= s
->data_end
) {
2340 s
->status
&= ~DRQ_STAT
;
2341 s
->end_transfer_func(s
);
2344 trace_ide_data_readw(addr
, ret
, bus
, s
);
2348 void ide_data_writel(void *opaque
, uint32_t addr
, uint32_t val
)
2350 IDEBus
*bus
= opaque
;
2351 IDEState
*s
= idebus_active_if(bus
);
2354 trace_ide_data_writel(addr
, val
, bus
, s
);
2356 /* PIO data access allowed only when DRQ bit is set. The result of a write
2357 * during PIO out is indeterminate, just ignore it. */
2358 if (!(s
->status
& DRQ_STAT
) || ide_is_pio_out(s
)) {
2363 if (p
+ 4 > s
->data_end
) {
2367 *(uint32_t *)p
= le32_to_cpu(val
);
2370 if (p
>= s
->data_end
) {
2371 s
->status
&= ~DRQ_STAT
;
2372 s
->end_transfer_func(s
);
2376 uint32_t ide_data_readl(void *opaque
, uint32_t addr
)
2378 IDEBus
*bus
= opaque
;
2379 IDEState
*s
= idebus_active_if(bus
);
2383 /* PIO data access allowed only when DRQ bit is set. The result of a read
2384 * during PIO in is indeterminate, return 0 and don't move forward. */
2385 if (!(s
->status
& DRQ_STAT
) || !ide_is_pio_out(s
)) {
2391 if (p
+ 4 > s
->data_end
) {
2395 ret
= cpu_to_le32(*(uint32_t *)p
);
2398 if (p
>= s
->data_end
) {
2399 s
->status
&= ~DRQ_STAT
;
2400 s
->end_transfer_func(s
);
2404 trace_ide_data_readl(addr
, ret
, bus
, s
);
2408 static void ide_dummy_transfer_stop(IDEState
*s
)
2410 s
->data_ptr
= s
->io_buffer
;
2411 s
->data_end
= s
->io_buffer
;
2412 s
->io_buffer
[0] = 0xff;
2413 s
->io_buffer
[1] = 0xff;
2414 s
->io_buffer
[2] = 0xff;
2415 s
->io_buffer
[3] = 0xff;
2418 void ide_bus_reset(IDEBus
*bus
)
2422 ide_reset(&bus
->ifs
[0]);
2423 ide_reset(&bus
->ifs
[1]);
2426 /* pending async DMA */
2427 if (bus
->dma
->aiocb
) {
2428 trace_ide_bus_reset_aio();
2429 blk_aio_cancel(bus
->dma
->aiocb
);
2430 bus
->dma
->aiocb
= NULL
;
2433 /* reset dma provider too */
2434 if (bus
->dma
->ops
->reset
) {
2435 bus
->dma
->ops
->reset(bus
->dma
);
2439 static bool ide_cd_is_tray_open(void *opaque
)
2441 return ((IDEState
*)opaque
)->tray_open
;
2444 static bool ide_cd_is_medium_locked(void *opaque
)
2446 return ((IDEState
*)opaque
)->tray_locked
;
2449 static void ide_resize_cb(void *opaque
)
2451 IDEState
*s
= opaque
;
2452 uint64_t nb_sectors
;
2454 if (!s
->identify_set
) {
2458 blk_get_geometry(s
->blk
, &nb_sectors
);
2459 s
->nb_sectors
= nb_sectors
;
2461 /* Update the identify data buffer. */
2462 if (s
->drive_kind
== IDE_CFATA
) {
2463 ide_cfata_identify_size(s
);
2465 /* IDE_CD uses a different set of callbacks entirely. */
2466 assert(s
->drive_kind
!= IDE_CD
);
2467 ide_identify_size(s
);
2471 static const BlockDevOps ide_cd_block_ops
= {
2472 .change_media_cb
= ide_cd_change_cb
,
2473 .eject_request_cb
= ide_cd_eject_request_cb
,
2474 .is_tray_open
= ide_cd_is_tray_open
,
2475 .is_medium_locked
= ide_cd_is_medium_locked
,
2478 static const BlockDevOps ide_hd_block_ops
= {
2479 .resize_cb
= ide_resize_cb
,
2482 int ide_init_drive(IDEState
*s
, BlockBackend
*blk
, IDEDriveKind kind
,
2483 const char *version
, const char *serial
, const char *model
,
2485 uint32_t cylinders
, uint32_t heads
, uint32_t secs
,
2486 int chs_trans
, Error
**errp
)
2488 uint64_t nb_sectors
;
2491 s
->drive_kind
= kind
;
2493 blk_get_geometry(blk
, &nb_sectors
);
2494 s
->cylinders
= cylinders
;
2497 s
->chs_trans
= chs_trans
;
2498 s
->nb_sectors
= nb_sectors
;
2500 /* The SMART values should be preserved across power cycles
2502 s
->smart_enabled
= 1;
2503 s
->smart_autosave
= 1;
2504 s
->smart_errors
= 0;
2505 s
->smart_selftest_count
= 0;
2506 if (kind
== IDE_CD
) {
2507 blk_set_dev_ops(blk
, &ide_cd_block_ops
, s
);
2508 blk_set_guest_block_size(blk
, 2048);
2510 if (!blk_is_inserted(s
->blk
)) {
2511 error_setg(errp
, "Device needs media, but drive is empty");
2514 if (blk_is_read_only(blk
)) {
2515 error_setg(errp
, "Can't use a read-only drive");
2518 blk_set_dev_ops(blk
, &ide_hd_block_ops
, s
);
2521 pstrcpy(s
->drive_serial_str
, sizeof(s
->drive_serial_str
), serial
);
2523 snprintf(s
->drive_serial_str
, sizeof(s
->drive_serial_str
),
2524 "QM%05d", s
->drive_serial
);
2527 pstrcpy(s
->drive_model_str
, sizeof(s
->drive_model_str
), model
);
2531 strcpy(s
->drive_model_str
, "QEMU DVD-ROM");
2534 strcpy(s
->drive_model_str
, "QEMU MICRODRIVE");
2537 strcpy(s
->drive_model_str
, "QEMU HARDDISK");
2543 pstrcpy(s
->version
, sizeof(s
->version
), version
);
2545 pstrcpy(s
->version
, sizeof(s
->version
), qemu_hw_version());
2549 blk_iostatus_enable(blk
);
2553 static void ide_init1(IDEBus
*bus
, int unit
)
2555 static int drive_serial
= 1;
2556 IDEState
*s
= &bus
->ifs
[unit
];
2560 s
->drive_serial
= drive_serial
++;
2561 /* we need at least 2k alignment for accessing CDROMs using O_DIRECT */
2562 s
->io_buffer_total_len
= IDE_DMA_BUF_SECTORS
*512 + 4;
2563 s
->io_buffer
= qemu_memalign(2048, s
->io_buffer_total_len
);
2564 memset(s
->io_buffer
, 0, s
->io_buffer_total_len
);
2566 s
->smart_selftest_data
= blk_blockalign(s
->blk
, 512);
2567 memset(s
->smart_selftest_data
, 0, 512);
2569 s
->sector_write_timer
= timer_new_ns(QEMU_CLOCK_VIRTUAL
,
2570 ide_sector_write_timer_cb
, s
);
2573 static int ide_nop_int(IDEDMA
*dma
, bool is_write
)
2578 static void ide_nop(IDEDMA
*dma
)
2582 static int32_t ide_nop_int32(IDEDMA
*dma
, int32_t l
)
2587 static const IDEDMAOps ide_dma_nop_ops
= {
2588 .prepare_buf
= ide_nop_int32
,
2589 .restart_dma
= ide_nop
,
2590 .rw_buf
= ide_nop_int
,
2593 static void ide_restart_dma(IDEState
*s
, enum ide_dma_cmd dma_cmd
)
2595 s
->unit
= s
->bus
->retry_unit
;
2596 ide_set_sector(s
, s
->bus
->retry_sector_num
);
2597 s
->nsector
= s
->bus
->retry_nsector
;
2598 s
->bus
->dma
->ops
->restart_dma(s
->bus
->dma
);
2599 s
->io_buffer_size
= 0;
2600 s
->dma_cmd
= dma_cmd
;
2601 ide_start_dma(s
, ide_dma_cb
);
2604 static void ide_restart_bh(void *opaque
)
2606 IDEBus
*bus
= opaque
;
2611 qemu_bh_delete(bus
->bh
);
2614 error_status
= bus
->error_status
;
2615 if (bus
->error_status
== 0) {
2619 s
= idebus_active_if(bus
);
2620 is_read
= (bus
->error_status
& IDE_RETRY_READ
) != 0;
2622 /* The error status must be cleared before resubmitting the request: The
2623 * request may fail again, and this case can only be distinguished if the
2624 * called function can set a new error status. */
2625 bus
->error_status
= 0;
2627 /* The HBA has generically asked to be kicked on retry */
2628 if (error_status
& IDE_RETRY_HBA
) {
2629 if (s
->bus
->dma
->ops
->restart
) {
2630 s
->bus
->dma
->ops
->restart(s
->bus
->dma
);
2632 } else if (IS_IDE_RETRY_DMA(error_status
)) {
2633 if (error_status
& IDE_RETRY_TRIM
) {
2634 ide_restart_dma(s
, IDE_DMA_TRIM
);
2636 ide_restart_dma(s
, is_read
? IDE_DMA_READ
: IDE_DMA_WRITE
);
2638 } else if (IS_IDE_RETRY_PIO(error_status
)) {
2642 ide_sector_write(s
);
2644 } else if (error_status
& IDE_RETRY_FLUSH
) {
2646 } else if (IS_IDE_RETRY_ATAPI(error_status
)) {
2647 assert(s
->end_transfer_func
== ide_atapi_cmd
);
2648 ide_atapi_dma_restart(s
);
2654 static void ide_restart_cb(void *opaque
, int running
, RunState state
)
2656 IDEBus
*bus
= opaque
;
2662 bus
->bh
= qemu_bh_new(ide_restart_bh
, bus
);
2663 qemu_bh_schedule(bus
->bh
);
2667 void ide_register_restart_cb(IDEBus
*bus
)
2669 if (bus
->dma
->ops
->restart_dma
) {
2670 bus
->vmstate
= qemu_add_vm_change_state_handler(ide_restart_cb
, bus
);
2674 static IDEDMA ide_dma_nop
= {
2675 .ops
= &ide_dma_nop_ops
,
2679 void ide_init2(IDEBus
*bus
, qemu_irq irq
)
2683 for(i
= 0; i
< 2; i
++) {
2685 ide_reset(&bus
->ifs
[i
]);
2688 bus
->dma
= &ide_dma_nop
;
2691 void ide_exit(IDEState
*s
)
2693 timer_del(s
->sector_write_timer
);
2694 timer_free(s
->sector_write_timer
);
2695 qemu_vfree(s
->smart_selftest_data
);
2696 qemu_vfree(s
->io_buffer
);
2699 static bool is_identify_set(void *opaque
, int version_id
)
2701 IDEState
*s
= opaque
;
2703 return s
->identify_set
!= 0;
2706 static EndTransferFunc
* transfer_end_table
[] = {
2710 ide_atapi_cmd_reply_end
,
2712 ide_dummy_transfer_stop
,
2715 static int transfer_end_table_idx(EndTransferFunc
*fn
)
2719 for (i
= 0; i
< ARRAY_SIZE(transfer_end_table
); i
++)
2720 if (transfer_end_table
[i
] == fn
)
2726 static int ide_drive_post_load(void *opaque
, int version_id
)
2728 IDEState
*s
= opaque
;
2730 if (s
->blk
&& s
->identify_set
) {
2731 blk_set_enable_write_cache(s
->blk
, !!(s
->identify_data
[85] & (1 << 5)));
2736 static int ide_drive_pio_post_load(void *opaque
, int version_id
)
2738 IDEState
*s
= opaque
;
2740 if (s
->end_transfer_fn_idx
>= ARRAY_SIZE(transfer_end_table
)) {
2743 s
->end_transfer_func
= transfer_end_table
[s
->end_transfer_fn_idx
];
2744 s
->data_ptr
= s
->io_buffer
+ s
->cur_io_buffer_offset
;
2745 s
->data_end
= s
->data_ptr
+ s
->cur_io_buffer_len
;
2746 s
->atapi_dma
= s
->feature
& 1; /* as per cmd_packet */
2751 static int ide_drive_pio_pre_save(void *opaque
)
2753 IDEState
*s
= opaque
;
2756 s
->cur_io_buffer_offset
= s
->data_ptr
- s
->io_buffer
;
2757 s
->cur_io_buffer_len
= s
->data_end
- s
->data_ptr
;
2759 idx
= transfer_end_table_idx(s
->end_transfer_func
);
2761 fprintf(stderr
, "%s: invalid end_transfer_func for DRQ_STAT\n",
2763 s
->end_transfer_fn_idx
= 2;
2765 s
->end_transfer_fn_idx
= idx
;
2771 static bool ide_drive_pio_state_needed(void *opaque
)
2773 IDEState
*s
= opaque
;
2775 return ((s
->status
& DRQ_STAT
) != 0)
2776 || (s
->bus
->error_status
& IDE_RETRY_PIO
);
2779 static bool ide_tray_state_needed(void *opaque
)
2781 IDEState
*s
= opaque
;
2783 return s
->tray_open
|| s
->tray_locked
;
2786 static bool ide_atapi_gesn_needed(void *opaque
)
2788 IDEState
*s
= opaque
;
2790 return s
->events
.new_media
|| s
->events
.eject_request
;
2793 static bool ide_error_needed(void *opaque
)
2795 IDEBus
*bus
= opaque
;
2797 return (bus
->error_status
!= 0);
2800 /* Fields for GET_EVENT_STATUS_NOTIFICATION ATAPI command */
2801 static const VMStateDescription vmstate_ide_atapi_gesn_state
= {
2802 .name
="ide_drive/atapi/gesn_state",
2804 .minimum_version_id
= 1,
2805 .needed
= ide_atapi_gesn_needed
,
2806 .fields
= (VMStateField
[]) {
2807 VMSTATE_BOOL(events
.new_media
, IDEState
),
2808 VMSTATE_BOOL(events
.eject_request
, IDEState
),
2809 VMSTATE_END_OF_LIST()
2813 static const VMStateDescription vmstate_ide_tray_state
= {
2814 .name
= "ide_drive/tray_state",
2816 .minimum_version_id
= 1,
2817 .needed
= ide_tray_state_needed
,
2818 .fields
= (VMStateField
[]) {
2819 VMSTATE_BOOL(tray_open
, IDEState
),
2820 VMSTATE_BOOL(tray_locked
, IDEState
),
2821 VMSTATE_END_OF_LIST()
2825 static const VMStateDescription vmstate_ide_drive_pio_state
= {
2826 .name
= "ide_drive/pio_state",
2828 .minimum_version_id
= 1,
2829 .pre_save
= ide_drive_pio_pre_save
,
2830 .post_load
= ide_drive_pio_post_load
,
2831 .needed
= ide_drive_pio_state_needed
,
2832 .fields
= (VMStateField
[]) {
2833 VMSTATE_INT32(req_nb_sectors
, IDEState
),
2834 VMSTATE_VARRAY_INT32(io_buffer
, IDEState
, io_buffer_total_len
, 1,
2835 vmstate_info_uint8
, uint8_t),
2836 VMSTATE_INT32(cur_io_buffer_offset
, IDEState
),
2837 VMSTATE_INT32(cur_io_buffer_len
, IDEState
),
2838 VMSTATE_UINT8(end_transfer_fn_idx
, IDEState
),
2839 VMSTATE_INT32(elementary_transfer_size
, IDEState
),
2840 VMSTATE_INT32(packet_transfer_size
, IDEState
),
2841 VMSTATE_END_OF_LIST()
2845 const VMStateDescription vmstate_ide_drive
= {
2846 .name
= "ide_drive",
2848 .minimum_version_id
= 0,
2849 .post_load
= ide_drive_post_load
,
2850 .fields
= (VMStateField
[]) {
2851 VMSTATE_INT32(mult_sectors
, IDEState
),
2852 VMSTATE_INT32(identify_set
, IDEState
),
2853 VMSTATE_BUFFER_TEST(identify_data
, IDEState
, is_identify_set
),
2854 VMSTATE_UINT8(feature
, IDEState
),
2855 VMSTATE_UINT8(error
, IDEState
),
2856 VMSTATE_UINT32(nsector
, IDEState
),
2857 VMSTATE_UINT8(sector
, IDEState
),
2858 VMSTATE_UINT8(lcyl
, IDEState
),
2859 VMSTATE_UINT8(hcyl
, IDEState
),
2860 VMSTATE_UINT8(hob_feature
, IDEState
),
2861 VMSTATE_UINT8(hob_sector
, IDEState
),
2862 VMSTATE_UINT8(hob_nsector
, IDEState
),
2863 VMSTATE_UINT8(hob_lcyl
, IDEState
),
2864 VMSTATE_UINT8(hob_hcyl
, IDEState
),
2865 VMSTATE_UINT8(select
, IDEState
),
2866 VMSTATE_UINT8(status
, IDEState
),
2867 VMSTATE_UINT8(lba48
, IDEState
),
2868 VMSTATE_UINT8(sense_key
, IDEState
),
2869 VMSTATE_UINT8(asc
, IDEState
),
2870 VMSTATE_UINT8_V(cdrom_changed
, IDEState
, 3),
2871 VMSTATE_END_OF_LIST()
2873 .subsections
= (const VMStateDescription
*[]) {
2874 &vmstate_ide_drive_pio_state
,
2875 &vmstate_ide_tray_state
,
2876 &vmstate_ide_atapi_gesn_state
,
2881 static const VMStateDescription vmstate_ide_error_status
= {
2882 .name
="ide_bus/error",
2884 .minimum_version_id
= 1,
2885 .needed
= ide_error_needed
,
2886 .fields
= (VMStateField
[]) {
2887 VMSTATE_INT32(error_status
, IDEBus
),
2888 VMSTATE_INT64_V(retry_sector_num
, IDEBus
, 2),
2889 VMSTATE_UINT32_V(retry_nsector
, IDEBus
, 2),
2890 VMSTATE_UINT8_V(retry_unit
, IDEBus
, 2),
2891 VMSTATE_END_OF_LIST()
2895 const VMStateDescription vmstate_ide_bus
= {
2898 .minimum_version_id
= 1,
2899 .fields
= (VMStateField
[]) {
2900 VMSTATE_UINT8(cmd
, IDEBus
),
2901 VMSTATE_UINT8(unit
, IDEBus
),
2902 VMSTATE_END_OF_LIST()
2904 .subsections
= (const VMStateDescription
*[]) {
2905 &vmstate_ide_error_status
,
2910 void ide_drive_get(DriveInfo
**hd
, int n
)
2914 for (i
= 0; i
< n
; i
++) {
2915 hd
[i
] = drive_get_by_index(IF_IDE
, i
);