spapr: Only report host/guest IOMMU page size mismatches on KVM
[qemu/ar7.git] / hw / vfio / pci.h
bloba8366bb2a74a888f9743a4f4c0294bbf47bd9afe
1 /*
2 * vfio based device assignment support - PCI devices
4 * Copyright Red Hat, Inc. 2012-2015
6 * Authors:
7 * Alex Williamson <alex.williamson@redhat.com>
9 * This work is licensed under the terms of the GNU GPL, version 2. See
10 * the COPYING file in the top-level directory.
12 #ifndef HW_VFIO_VFIO_PCI_H
13 #define HW_VFIO_VFIO_PCI_H
15 #include "qemu-common.h"
16 #include "exec/memory.h"
17 #include "hw/pci/pci.h"
18 #include "hw/vfio/vfio-common.h"
19 #include "qemu/event_notifier.h"
20 #include "qemu/queue.h"
21 #include "qemu/timer.h"
23 #define PCI_ANY_ID (~0)
25 struct VFIOPCIDevice;
27 typedef struct VFIOQuirk {
28 QLIST_ENTRY(VFIOQuirk) next;
29 void *data;
30 int nr_mem;
31 MemoryRegion *mem;
32 } VFIOQuirk;
34 typedef struct VFIOBAR {
35 VFIORegion region;
36 bool ioport;
37 bool mem64;
38 QLIST_HEAD(, VFIOQuirk) quirks;
39 } VFIOBAR;
41 typedef struct VFIOVGARegion {
42 MemoryRegion mem;
43 off_t offset;
44 int nr;
45 QLIST_HEAD(, VFIOQuirk) quirks;
46 } VFIOVGARegion;
48 typedef struct VFIOVGA {
49 off_t fd_offset;
50 int fd;
51 VFIOVGARegion region[QEMU_PCI_VGA_NUM_REGIONS];
52 } VFIOVGA;
54 typedef struct VFIOINTx {
55 bool pending; /* interrupt pending */
56 bool kvm_accel; /* set when QEMU bypass through KVM enabled */
57 uint8_t pin; /* which pin to pull for qemu_set_irq */
58 EventNotifier interrupt; /* eventfd triggered on interrupt */
59 EventNotifier unmask; /* eventfd for unmask on QEMU bypass */
60 PCIINTxRoute route; /* routing info for QEMU bypass */
61 uint32_t mmap_timeout; /* delay to re-enable mmaps after interrupt */
62 QEMUTimer *mmap_timer; /* enable mmaps after periods w/o interrupts */
63 } VFIOINTx;
65 typedef struct VFIOMSIVector {
67 * Two interrupt paths are configured per vector. The first, is only used
68 * for interrupts injected via QEMU. This is typically the non-accel path,
69 * but may also be used when we want QEMU to handle masking and pending
70 * bits. The KVM path bypasses QEMU and is therefore higher performance,
71 * but requires masking at the device. virq is used to track the MSI route
72 * through KVM, thus kvm_interrupt is only available when virq is set to a
73 * valid (>= 0) value.
75 EventNotifier interrupt;
76 EventNotifier kvm_interrupt;
77 struct VFIOPCIDevice *vdev; /* back pointer to device */
78 int virq;
79 bool use;
80 } VFIOMSIVector;
82 enum {
83 VFIO_INT_NONE = 0,
84 VFIO_INT_INTx = 1,
85 VFIO_INT_MSI = 2,
86 VFIO_INT_MSIX = 3,
89 /* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */
90 typedef struct VFIOMSIXInfo {
91 uint8_t table_bar;
92 uint8_t pba_bar;
93 uint16_t entries;
94 uint32_t table_offset;
95 uint32_t pba_offset;
96 MemoryRegion mmap_mem;
97 void *mmap;
98 unsigned long *pending;
99 } VFIOMSIXInfo;
101 typedef struct VFIOPCIDevice {
102 PCIDevice pdev;
103 VFIODevice vbasedev;
104 VFIOINTx intx;
105 unsigned int config_size;
106 uint8_t *emulated_config_bits; /* QEMU emulated bits, little-endian */
107 off_t config_offset; /* Offset of config space region within device fd */
108 unsigned int rom_size;
109 off_t rom_offset; /* Offset of ROM region within device fd */
110 void *rom;
111 int msi_cap_size;
112 VFIOMSIVector *msi_vectors;
113 VFIOMSIXInfo *msix;
114 int nr_vectors; /* Number of MSI/MSIX vectors currently in use */
115 int interrupt; /* Current interrupt type */
116 VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */
117 VFIOVGA *vga; /* 0xa0000, 0x3b0, 0x3c0 */
118 void *igd_opregion;
119 PCIHostDeviceAddress host;
120 EventNotifier err_notifier;
121 EventNotifier req_notifier;
122 int (*resetfn)(struct VFIOPCIDevice *);
123 uint32_t vendor_id;
124 uint32_t device_id;
125 uint32_t sub_vendor_id;
126 uint32_t sub_device_id;
127 uint32_t features;
128 #define VFIO_FEATURE_ENABLE_VGA_BIT 0
129 #define VFIO_FEATURE_ENABLE_VGA (1 << VFIO_FEATURE_ENABLE_VGA_BIT)
130 #define VFIO_FEATURE_ENABLE_REQ_BIT 1
131 #define VFIO_FEATURE_ENABLE_REQ (1 << VFIO_FEATURE_ENABLE_REQ_BIT)
132 #define VFIO_FEATURE_ENABLE_IGD_OPREGION_BIT 2
133 #define VFIO_FEATURE_ENABLE_IGD_OPREGION \
134 (1 << VFIO_FEATURE_ENABLE_IGD_OPREGION_BIT)
135 int32_t bootindex;
136 uint32_t igd_gms;
137 uint8_t pm_cap;
138 bool pci_aer;
139 bool req_enabled;
140 bool has_flr;
141 bool has_pm_reset;
142 bool rom_read_failed;
143 bool no_kvm_intx;
144 bool no_kvm_msi;
145 bool no_kvm_msix;
146 } VFIOPCIDevice;
148 uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
149 void vfio_pci_write_config(PCIDevice *pdev,
150 uint32_t addr, uint32_t val, int len);
152 uint64_t vfio_vga_read(void *opaque, hwaddr addr, unsigned size);
153 void vfio_vga_write(void *opaque, hwaddr addr, uint64_t data, unsigned size);
155 bool vfio_blacklist_opt_rom(VFIOPCIDevice *vdev);
156 void vfio_vga_quirk_setup(VFIOPCIDevice *vdev);
157 void vfio_vga_quirk_exit(VFIOPCIDevice *vdev);
158 void vfio_vga_quirk_finalize(VFIOPCIDevice *vdev);
159 void vfio_bar_quirk_setup(VFIOPCIDevice *vdev, int nr);
160 void vfio_bar_quirk_exit(VFIOPCIDevice *vdev, int nr);
161 void vfio_bar_quirk_finalize(VFIOPCIDevice *vdev, int nr);
162 void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev);
164 int vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp);
166 int vfio_pci_igd_opregion_init(VFIOPCIDevice *vdev,
167 struct vfio_region_info *info,
168 Error **errp);
170 #endif /* HW_VFIO_VFIO_PCI_H */