hw/riscv: Move sifive_u_otp model to hw/misc
[qemu/ar7.git] / hw / arm / tosa.c
blob90eef1f14dd67439eca73706c025455bf891756b
1 /* vim:set shiftwidth=4 ts=4 et: */
2 /*
3 * PXA255 Sharp Zaurus SL-6000 PDA platform
5 * Copyright (c) 2008 Dmitry Baryshkov
7 * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
8 * This code is licensed under the GNU GPL v2.
10 * Contributions after 2012-01-13 are licensed under the terms of the
11 * GNU GPL, version 2 or (at your option) any later version.
14 #include "qemu/osdep.h"
15 #include "qapi/error.h"
16 #include "sysemu/runstate.h"
17 #include "hw/arm/pxa.h"
18 #include "hw/arm/boot.h"
19 #include "hw/arm/sharpsl.h"
20 #include "hw/pcmcia.h"
21 #include "hw/boards.h"
22 #include "hw/display/tc6393xb.h"
23 #include "hw/i2c/i2c.h"
24 #include "hw/irq.h"
25 #include "hw/ssi/ssi.h"
26 #include "hw/sysbus.h"
27 #include "exec/address-spaces.h"
29 #define TOSA_RAM 0x04000000
30 #define TOSA_ROM 0x00800000
32 #define TOSA_GPIO_USB_IN (5)
33 #define TOSA_GPIO_nSD_DETECT (9)
34 #define TOSA_GPIO_ON_RESET (19)
35 #define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */
36 #define TOSA_GPIO_CF_CD (13)
37 #define TOSA_GPIO_TC6393XB_INT (15)
38 #define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */
40 #define TOSA_SCOOP_GPIO_BASE 1
41 #define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2)
42 #define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3)
43 #define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4)
45 #define TOSA_SCOOP_JC_GPIO_BASE 1
46 #define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0)
47 #define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1)
48 #define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2)
49 #define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5)
50 #define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7)
52 #define DAC_BASE 0x4e
53 #define DAC_CH1 0
54 #define DAC_CH2 1
56 static void tosa_microdrive_attach(PXA2xxState *cpu)
58 PCMCIACardState *md;
59 DriveInfo *dinfo;
61 dinfo = drive_get(IF_IDE, 0, 0);
62 if (!dinfo || dinfo->media_cd)
63 return;
64 md = dscm1xxxx_init(dinfo);
65 pxa2xx_pcmcia_attach(cpu->pcmcia[0], md);
69 * Encapsulation of some GPIO line behaviour for the Tosa board
71 * QEMU interface:
72 * + named GPIO inputs "leds[0..3]": assert to light LEDs
73 * + named GPIO input "reset": when asserted, resets the system
76 #define TYPE_TOSA_MISC_GPIO "tosa-misc-gpio"
77 #define TOSA_MISC_GPIO(obj) \
78 OBJECT_CHECK(TosaMiscGPIOState, (obj), TYPE_TOSA_MISC_GPIO)
80 typedef struct TosaMiscGPIOState {
81 SysBusDevice parent_obj;
82 } TosaMiscGPIOState;
84 static void tosa_gpio_leds(void *opaque, int line, int level)
86 switch (line) {
87 case 0:
88 fprintf(stderr, "blue LED %s.\n", level ? "on" : "off");
89 break;
90 case 1:
91 fprintf(stderr, "green LED %s.\n", level ? "on" : "off");
92 break;
93 case 2:
94 fprintf(stderr, "amber LED %s.\n", level ? "on" : "off");
95 break;
96 case 3:
97 fprintf(stderr, "wlan LED %s.\n", level ? "on" : "off");
98 break;
99 default:
100 g_assert_not_reached();
104 static void tosa_reset(void *opaque, int line, int level)
106 if (level) {
107 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
111 static void tosa_misc_gpio_init(Object *obj)
113 DeviceState *dev = DEVICE(obj);
115 qdev_init_gpio_in_named(dev, tosa_gpio_leds, "leds", 4);
116 qdev_init_gpio_in_named(dev, tosa_reset, "reset", 1);
119 static void tosa_gpio_setup(PXA2xxState *cpu,
120 DeviceState *scp0,
121 DeviceState *scp1,
122 TC6393xbState *tmio)
124 DeviceState *misc_gpio;
126 misc_gpio = sysbus_create_simple(TYPE_TOSA_MISC_GPIO, -1, NULL);
128 /* MMC/SD host */
129 pxa2xx_mmci_handlers(cpu->mmc,
130 qdev_get_gpio_in(scp0, TOSA_GPIO_SD_WP),
131 qemu_irq_invert(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_nSD_DETECT)));
133 /* Handle reset */
134 qdev_connect_gpio_out(cpu->gpio, TOSA_GPIO_ON_RESET,
135 qdev_get_gpio_in_named(misc_gpio, "reset", 0));
137 /* PCMCIA signals: card's IRQ and Card-Detect */
138 pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
139 qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_IRQ),
140 qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_CD));
142 pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
143 qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_JC_CF_IRQ),
144 NULL);
146 qdev_connect_gpio_out(scp1, TOSA_GPIO_BT_LED,
147 qdev_get_gpio_in_named(misc_gpio, "leds", 0));
148 qdev_connect_gpio_out(scp1, TOSA_GPIO_NOTE_LED,
149 qdev_get_gpio_in_named(misc_gpio, "leds", 1));
150 qdev_connect_gpio_out(scp1, TOSA_GPIO_CHRG_ERR_LED,
151 qdev_get_gpio_in_named(misc_gpio, "leds", 2));
152 qdev_connect_gpio_out(scp1, TOSA_GPIO_WLAN_LED,
153 qdev_get_gpio_in_named(misc_gpio, "leds", 3));
155 qdev_connect_gpio_out(scp1, TOSA_GPIO_TC6393XB_L3V_ON, tc6393xb_l3v_get(tmio));
157 /* UDC Vbus */
158 qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_USB_IN));
161 static uint32_t tosa_ssp_tansfer(SSISlave *dev, uint32_t value)
163 fprintf(stderr, "TG: %d %02x\n", value >> 5, value & 0x1f);
164 return 0;
167 static void tosa_ssp_realize(SSISlave *dev, Error **errp)
169 /* Nothing to do. */
172 #define TYPE_TOSA_DAC "tosa_dac"
173 #define TOSA_DAC(obj) OBJECT_CHECK(TosaDACState, (obj), TYPE_TOSA_DAC)
175 typedef struct {
176 I2CSlave parent_obj;
178 int len;
179 char buf[3];
180 } TosaDACState;
182 static int tosa_dac_send(I2CSlave *i2c, uint8_t data)
184 TosaDACState *s = TOSA_DAC(i2c);
186 s->buf[s->len] = data;
187 if (s->len ++ > 2) {
188 #ifdef VERBOSE
189 fprintf(stderr, "%s: message too long (%i bytes)\n", __func__, s->len);
190 #endif
191 return 1;
194 if (s->len == 2) {
195 fprintf(stderr, "dac: channel %d value 0x%02x\n",
196 s->buf[0], s->buf[1]);
199 return 0;
202 static int tosa_dac_event(I2CSlave *i2c, enum i2c_event event)
204 TosaDACState *s = TOSA_DAC(i2c);
206 s->len = 0;
207 switch (event) {
208 case I2C_START_SEND:
209 break;
210 case I2C_START_RECV:
211 printf("%s: recv not supported!!!\n", __func__);
212 break;
213 case I2C_FINISH:
214 #ifdef VERBOSE
215 if (s->len < 2)
216 printf("%s: message too short (%i bytes)\n", __func__, s->len);
217 if (s->len > 2)
218 printf("%s: message too long\n", __func__);
219 #endif
220 break;
221 default:
222 break;
225 return 0;
228 static uint8_t tosa_dac_recv(I2CSlave *s)
230 printf("%s: recv not supported!!!\n", __func__);
231 return 0xff;
234 static void tosa_tg_init(PXA2xxState *cpu)
236 I2CBus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
237 i2c_slave_create_simple(bus, TYPE_TOSA_DAC, DAC_BASE);
238 ssi_create_slave(cpu->ssp[1], "tosa-ssp");
242 static struct arm_boot_info tosa_binfo = {
243 .loader_start = PXA2XX_SDRAM_BASE,
244 .ram_size = 0x04000000,
247 static void tosa_init(MachineState *machine)
249 MemoryRegion *address_space_mem = get_system_memory();
250 MemoryRegion *rom = g_new(MemoryRegion, 1);
251 PXA2xxState *mpu;
252 TC6393xbState *tmio;
253 DeviceState *scp0, *scp1;
255 mpu = pxa255_init(address_space_mem, tosa_binfo.ram_size);
257 memory_region_init_rom(rom, NULL, "tosa.rom", TOSA_ROM, &error_fatal);
258 memory_region_add_subregion(address_space_mem, 0, rom);
260 tmio = tc6393xb_init(address_space_mem, 0x10000000,
261 qdev_get_gpio_in(mpu->gpio, TOSA_GPIO_TC6393XB_INT));
263 scp0 = sysbus_create_simple("scoop", 0x08800000, NULL);
264 scp1 = sysbus_create_simple("scoop", 0x14800040, NULL);
266 tosa_gpio_setup(mpu, scp0, scp1, tmio);
268 tosa_microdrive_attach(mpu);
270 tosa_tg_init(mpu);
272 tosa_binfo.board_id = 0x208;
273 arm_load_kernel(mpu->cpu, machine, &tosa_binfo);
274 sl_bootparam_write(SL_PXA_PARAM_BASE);
277 static void tosapda_machine_init(MachineClass *mc)
279 mc->desc = "Sharp SL-6000 (Tosa) PDA (PXA255)";
280 mc->init = tosa_init;
281 mc->block_default_type = IF_IDE;
282 mc->ignore_memory_transaction_failures = true;
285 DEFINE_MACHINE("tosa", tosapda_machine_init)
287 static void tosa_dac_class_init(ObjectClass *klass, void *data)
289 I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
291 k->event = tosa_dac_event;
292 k->recv = tosa_dac_recv;
293 k->send = tosa_dac_send;
296 static const TypeInfo tosa_dac_info = {
297 .name = TYPE_TOSA_DAC,
298 .parent = TYPE_I2C_SLAVE,
299 .instance_size = sizeof(TosaDACState),
300 .class_init = tosa_dac_class_init,
303 static void tosa_ssp_class_init(ObjectClass *klass, void *data)
305 SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
307 k->realize = tosa_ssp_realize;
308 k->transfer = tosa_ssp_tansfer;
311 static const TypeInfo tosa_ssp_info = {
312 .name = "tosa-ssp",
313 .parent = TYPE_SSI_SLAVE,
314 .instance_size = sizeof(SSISlave),
315 .class_init = tosa_ssp_class_init,
318 static const TypeInfo tosa_misc_gpio_info = {
319 .name = TYPE_TOSA_MISC_GPIO,
320 .parent = TYPE_SYS_BUS_DEVICE,
321 .instance_size = sizeof(TosaMiscGPIOState),
322 .instance_init = tosa_misc_gpio_init,
324 * No class init required: device has no internal state so does not
325 * need to set up reset or vmstate, and has no realize method.
329 static void tosa_register_types(void)
331 type_register_static(&tosa_dac_info);
332 type_register_static(&tosa_ssp_info);
333 type_register_static(&tosa_misc_gpio_info);
336 type_init(tosa_register_types)