Fix mingw32 build warnings
[qemu-kvm/fedora.git] / hw / mips_r4k.c
blob71832d576a7b90422df2d7c9763383b2c69e26cb
1 /*
2 * QEMU/MIPS pseudo-board
4 * emulates a simple machine with ISA-like bus.
5 * ISA IO space mapped to the 0x14000000 (PHYS) and
6 * ISA memory at the 0x10000000 (PHYS, 16Mb in size).
7 * All peripherial devices are attached to this "bus" with
8 * the standard PC ISA addresses.
9 */
10 #include "hw.h"
11 #include "mips.h"
12 #include "pc.h"
13 #include "isa.h"
14 #include "net.h"
15 #include "sysemu.h"
16 #include "boards.h"
17 #include "flash.h"
18 #include "qemu-log.h"
19 #include "mips-bios.h"
21 #define PHYS_TO_VIRT(x) ((x) | ~(target_ulong)0x7fffffff)
23 #define VIRT_TO_PHYS_ADDEND (-((int64_t)(int32_t)0x80000000))
25 #define MAX_IDE_BUS 2
27 static const int ide_iobase[2] = { 0x1f0, 0x170 };
28 static const int ide_iobase2[2] = { 0x3f6, 0x376 };
29 static const int ide_irq[2] = { 14, 15 };
31 static int serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
32 static int serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 };
34 static PITState *pit; /* PIT i8254 */
36 /* i8254 PIT is attached to the IRQ0 at PIC i8259 */
38 static struct _loaderparams {
39 int ram_size;
40 const char *kernel_filename;
41 const char *kernel_cmdline;
42 const char *initrd_filename;
43 } loaderparams;
45 static void mips_qemu_writel (void *opaque, target_phys_addr_t addr,
46 uint32_t val)
48 if ((addr & 0xffff) == 0 && val == 42)
49 qemu_system_reset_request ();
50 else if ((addr & 0xffff) == 4 && val == 42)
51 qemu_system_shutdown_request ();
54 static uint32_t mips_qemu_readl (void *opaque, target_phys_addr_t addr)
56 return 0;
59 static CPUWriteMemoryFunc *mips_qemu_write[] = {
60 &mips_qemu_writel,
61 &mips_qemu_writel,
62 &mips_qemu_writel,
65 static CPUReadMemoryFunc *mips_qemu_read[] = {
66 &mips_qemu_readl,
67 &mips_qemu_readl,
68 &mips_qemu_readl,
71 static int mips_qemu_iomemtype = 0;
73 static void load_kernel (CPUState *env)
75 int64_t entry, kernel_low, kernel_high;
76 long kernel_size, initrd_size;
77 ram_addr_t initrd_offset;
78 int ret;
80 kernel_size = load_elf(loaderparams.kernel_filename, VIRT_TO_PHYS_ADDEND,
81 (uint64_t *)&entry, (uint64_t *)&kernel_low,
82 (uint64_t *)&kernel_high);
83 if (kernel_size >= 0) {
84 if ((entry & ~0x7fffffffULL) == 0x80000000)
85 entry = (int32_t)entry;
86 env->active_tc.PC = entry;
87 } else {
88 fprintf(stderr, "qemu: could not load kernel '%s'\n",
89 loaderparams.kernel_filename);
90 exit(1);
93 /* load initrd */
94 initrd_size = 0;
95 initrd_offset = 0;
96 if (loaderparams.initrd_filename) {
97 initrd_size = get_image_size (loaderparams.initrd_filename);
98 if (initrd_size > 0) {
99 initrd_offset = (kernel_high + ~TARGET_PAGE_MASK) & TARGET_PAGE_MASK;
100 if (initrd_offset + initrd_size > ram_size) {
101 fprintf(stderr,
102 "qemu: memory too small for initial ram disk '%s'\n",
103 loaderparams.initrd_filename);
104 exit(1);
106 initrd_size = load_image_targphys(loaderparams.initrd_filename,
107 initrd_offset,
108 ram_size - initrd_offset);
110 if (initrd_size == (target_ulong) -1) {
111 fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
112 loaderparams.initrd_filename);
113 exit(1);
117 /* Store command line. */
118 if (initrd_size > 0) {
119 char buf[64];
120 ret = snprintf(buf, 64, "rd_start=0x" TARGET_FMT_lx " rd_size=%li ",
121 PHYS_TO_VIRT((uint32_t)initrd_offset),
122 initrd_size);
123 cpu_physical_memory_write((16 << 20) - 256, (void *)buf, 64);
124 } else {
125 ret = 0;
127 pstrcpy_targphys((16 << 20) - 256 + ret, 256,
128 loaderparams.kernel_cmdline);
130 stl_phys((16 << 20) - 260, 0x12345678);
131 stl_phys((16 << 20) - 264, ram_size);
134 static void main_cpu_reset(void *opaque)
136 CPUState *env = opaque;
137 cpu_reset(env);
139 if (loaderparams.kernel_filename)
140 load_kernel (env);
143 static const int sector_len = 32 * 1024;
144 static
145 void mips_r4k_init (ram_addr_t ram_size,
146 const char *boot_device,
147 const char *kernel_filename, const char *kernel_cmdline,
148 const char *initrd_filename, const char *cpu_model)
150 char *filename;
151 ram_addr_t ram_offset;
152 ram_addr_t bios_offset;
153 int bios_size;
154 CPUState *env;
155 RTCState *rtc_state;
156 int i;
157 qemu_irq *i8259;
158 int index;
159 BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
161 /* init CPUs */
162 if (cpu_model == NULL) {
163 #ifdef TARGET_MIPS64
164 cpu_model = "R4000";
165 #else
166 cpu_model = "24Kf";
167 #endif
169 env = cpu_init(cpu_model);
170 if (!env) {
171 fprintf(stderr, "Unable to find CPU definition\n");
172 exit(1);
174 qemu_register_reset(main_cpu_reset, 0, env);
176 /* allocate RAM */
177 if (ram_size > (256 << 20)) {
178 fprintf(stderr,
179 "qemu: Too much memory for this machine: %d MB, maximum 256 MB\n",
180 ((unsigned int)ram_size / (1 << 20)));
181 exit(1);
183 ram_offset = qemu_ram_alloc(ram_size);
185 cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
187 if (!mips_qemu_iomemtype) {
188 mips_qemu_iomemtype = cpu_register_io_memory(0, mips_qemu_read,
189 mips_qemu_write, NULL);
191 cpu_register_physical_memory(0x1fbf0000, 0x10000, mips_qemu_iomemtype);
193 /* Try to load a BIOS image. If this fails, we continue regardless,
194 but initialize the hardware ourselves. When a kernel gets
195 preloaded we also initialize the hardware, since the BIOS wasn't
196 run. */
197 if (bios_name == NULL)
198 bios_name = BIOS_FILENAME;
199 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
200 if (filename) {
201 bios_size = get_image_size(filename);
202 } else {
203 bios_size = -1;
205 if ((bios_size > 0) && (bios_size <= BIOS_SIZE)) {
206 bios_offset = qemu_ram_alloc(BIOS_SIZE);
207 cpu_register_physical_memory(0x1fc00000, BIOS_SIZE,
208 bios_offset | IO_MEM_ROM);
210 load_image_targphys(filename, 0x1fc00000, BIOS_SIZE);
211 } else if ((index = drive_get_index(IF_PFLASH, 0, 0)) > -1) {
212 uint32_t mips_rom = 0x00400000;
213 bios_offset = qemu_ram_alloc(mips_rom);
214 if (!pflash_cfi01_register(0x1fc00000, bios_offset,
215 drives_table[index].bdrv, sector_len, mips_rom / sector_len,
216 4, 0, 0, 0, 0)) {
217 fprintf(stderr, "qemu: Error registering flash memory.\n");
220 else {
221 /* not fatal */
222 fprintf(stderr, "qemu: Warning, could not load MIPS bios '%s'\n",
223 bios_name);
225 if (filename) {
226 qemu_free(filename);
229 if (kernel_filename) {
230 loaderparams.ram_size = ram_size;
231 loaderparams.kernel_filename = kernel_filename;
232 loaderparams.kernel_cmdline = kernel_cmdline;
233 loaderparams.initrd_filename = initrd_filename;
234 load_kernel (env);
237 /* Init CPU internal devices */
238 cpu_mips_irq_init_cpu(env);
239 cpu_mips_clock_init(env);
241 /* The PIC is attached to the MIPS CPU INT0 pin */
242 i8259 = i8259_init(env->irq[2]);
244 rtc_state = rtc_init(0x70, i8259[8], 2000);
246 /* Register 64 KB of ISA IO space at 0x14000000 */
247 isa_mmio_init(0x14000000, 0x00010000);
248 isa_mem_base = 0x10000000;
250 pit = pit_init(0x40, i8259[0]);
252 for(i = 0; i < MAX_SERIAL_PORTS; i++) {
253 if (serial_hds[i]) {
254 serial_init(serial_io[i], i8259[serial_irq[i]], 115200,
255 serial_hds[i]);
259 isa_vga_init();
261 if (nd_table[0].vlan)
262 isa_ne2000_init(0x300, i8259[9], &nd_table[0]);
264 if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
265 fprintf(stderr, "qemu: too many IDE bus\n");
266 exit(1);
269 for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
270 index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
271 if (index != -1)
272 hd[i] = drives_table[index].bdrv;
273 else
274 hd[i] = NULL;
277 for(i = 0; i < MAX_IDE_BUS; i++)
278 isa_ide_init(ide_iobase[i], ide_iobase2[i], i8259[ide_irq[i]],
279 hd[MAX_IDE_DEVS * i],
280 hd[MAX_IDE_DEVS * i + 1]);
282 i8042_init(i8259[1], i8259[12], 0x60);
285 static QEMUMachine mips_machine = {
286 .name = "mips",
287 .desc = "mips r4k platform",
288 .init = mips_r4k_init,
291 static void mips_machine_init(void)
293 qemu_register_machine(&mips_machine);
296 machine_init(mips_machine_init);