hw/pflash_cfi02.c

   1 /*
   2  *  CFI parallel flash with AMD command set emulation
   3  *
   4  *  Copyright (c) 2005 Jocelyn Mayer
   5  *
   6  * This library is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU Lesser General Public
   8  * License as published by the Free Software Foundation; either
   9  * version 2 of the License, or (at your option) any later version.
  10  *
  11  * This library is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  14  * Lesser General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU Lesser General Public
  17  * License along with this library; if not, write to the Free Software
  18  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA  02110-1301 USA
  19  */
  20
  21 /*
  22  * For now, this code can emulate flashes of 1, 2 or 4 bytes width.
  23  * Supported commands/modes are:
  24  * - flash read
  25  * - flash write
  26  * - flash ID read
  27  * - sector erase
  28  * - chip erase
  29  * - unlock bypass command
  30  * - CFI queries
  31  *
  32  * It does not support flash interleaving.
  33  * It does not implement boot blocs with reduced size
  34  * It does not implement software data protection as found in many real chips
  35  * It does not implement erase suspend/resume commands
  36  * It does not implement multiple sectors erase
  37  */
  38
  39 #include "hw.h"
  40 #include "flash.h"
  41 #include "qemu-timer.h"
  42 #include "block.h"
  43
  44 //#define PFLASH_DEBUG
  45 #ifdef PFLASH_DEBUG
  46 #define DPRINTF(fmt, args...)                      \
  47 do {                                               \
  48         printf("PFLASH: " fmt , ##args);           \
  49 } while (0)
  50 #else
  51 #define DPRINTF(fmt, args...) do { } while (0)
  52 #endif
  53
  54 struct pflash_t {
  55     BlockDriverState *bs;
  56     target_phys_addr_t base;
  57     uint32_t sector_len;
  58     uint32_t chip_len;
  59     int mappings;
  60     int width;
  61     int wcycle; /* if 0, the flash is read normally */
  62     int bypass;
  63     int ro;
  64     uint8_t cmd;
  65     uint8_t status;
  66     uint16_t ident[4];
  67     uint16_t unlock_addr[2];
  68     uint8_t cfi_len;
  69     uint8_t cfi_table[0x52];
  70     QEMUTimer *timer;
  71     ram_addr_t off;
  72     int fl_mem;
  73     int rom_mode;
  74     void *storage;
  75 };
  76
  77 static void pflash_register_memory(pflash_t *pfl, int rom_mode)
  78 {
  79     unsigned long phys_offset = pfl->fl_mem;
  80     int i;
  81
  82     if (rom_mode)
  83         phys_offset |= pfl->off | IO_MEM_ROMD;
  84     pfl->rom_mode = rom_mode;
  85
  86     for (i = 0; i < pfl->mappings; i++)
  87         cpu_register_physical_memory(pfl->base + i * pfl->chip_len,
  88                                      pfl->chip_len, phys_offset);
  89 }
  90
  91 static void pflash_timer (void *opaque)
  92 {
  93     pflash_t *pfl = opaque;
  94
  95     DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
  96     /* Reset flash */
  97     pfl->status ^= 0x80;
  98     if (pfl->bypass) {
  99         pfl->wcycle = 2;
 100     } else {
 101         pflash_register_memory(pfl, 1);
 102         pfl->wcycle = 0;
 103     }
 104     pfl->cmd = 0;
 105 }
 106
 107 static uint32_t pflash_read (pflash_t *pfl, uint32_t offset, int width)
 108 {
 109     uint32_t boff;
 110     uint32_t ret;
 111     uint8_t *p;
 112
 113     DPRINTF("%s: offset " TARGET_FMT_lx "\n", __func__, offset);
 114     ret = -1;
 115     if (pfl->rom_mode) {
 116         /* Lazy reset of to ROMD mode */
 117         if (pfl->wcycle == 0)
 118             pflash_register_memory(pfl, 1);
 119     }
 120     offset &= pfl->chip_len - 1;
 121     boff = offset & 0xFF;
 122     if (pfl->width == 2)
 123         boff = boff >> 1;
 124     else if (pfl->width == 4)
 125         boff = boff >> 2;
 126     switch (pfl->cmd) {
 127     default:
 128         /* This should never happen : reset state & treat it as a read*/
 129         DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
 130         pfl->wcycle = 0;
 131         pfl->cmd = 0;
 132     case 0x80:
 133         /* We accept reads during second unlock sequence... */
 134     case 0x00:
 135     flash_read:
 136         /* Flash area read */
 137         p = pfl->storage;
 138         switch (width) {
 139         case 1:
 140             ret = p[offset];
 141 //            DPRINTF("%s: data offset %08x %02x\n", __func__, offset, ret);
 142             break;
 143         case 2:
 144 #if defined(TARGET_WORDS_BIGENDIAN)
 145             ret = p[offset] << 8;
 146             ret |= p[offset + 1];
 147 #else
 148             ret = p[offset];
 149             ret |= p[offset + 1] << 8;
 150 #endif
 151 //            DPRINTF("%s: data offset %08x %04x\n", __func__, offset, ret);
 152             break;
 153         case 4:
 154 #if defined(TARGET_WORDS_BIGENDIAN)
 155             ret = p[offset] << 24;
 156             ret |= p[offset + 1] << 16;
 157             ret |= p[offset + 2] << 8;
 158             ret |= p[offset + 3];
 159 #else
 160             ret = p[offset];
 161             ret |= p[offset + 1] << 8;
 162             ret |= p[offset + 2] << 16;
 163             ret |= p[offset + 3] << 24;
 164 #endif
 165 //            DPRINTF("%s: data offset %08x %08x\n", __func__, offset, ret);
 166             break;
 167         }
 168         break;
 169     case 0x90:
 170         /* flash ID read */
 171         switch (boff) {
 172         case 0x00:
 173         case 0x01:
 174             ret = pfl->ident[boff & 0x01];
 175             break;
 176         case 0x02:
 177             ret = 0x00; /* Pretend all sectors are unprotected */
 178             break;
 179         case 0x0E:
 180         case 0x0F:
 181             if (pfl->ident[2 + (boff & 0x01)] == (uint8_t)-1)
 182                 goto flash_read;
 183             ret = pfl->ident[2 + (boff & 0x01)];
 184             break;
 185         default:
 186             goto flash_read;
 187         }
 188         DPRINTF("%s: ID " TARGET_FMT_ld " %x\n", __func__, boff, ret);
 189         break;
 190     case 0xA0:
 191     case 0x10:
 192     case 0x30:
 193         /* Status register read */
 194         ret = pfl->status;
 195         DPRINTF("%s: status %x\n", __func__, ret);
 196         /* Toggle bit 6 */
 197         pfl->status ^= 0x40;
 198         break;
 199     case 0x98:
 200         /* CFI query mode */
 201         if (boff > pfl->cfi_len)
 202             ret = 0;
 203         else
 204             ret = pfl->cfi_table[boff];
 205         break;
 206     }
 207
 208     return ret;
 209 }
 210
 211 /* update flash content on disk */
 212 static void pflash_update(pflash_t *pfl, int offset,
 213                           int size)
 214 {
 215     int offset_end;
 216     if (pfl->bs) {
 217         offset_end = offset + size;
 218         /* round to sectors */
 219         offset = offset >> 9;
 220         offset_end = (offset_end + 511) >> 9;
 221         bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
 222                    offset_end - offset);
 223     }
 224 }
 225
 226 static void pflash_write (pflash_t *pfl, uint32_t offset, uint32_t value,
 227                           int width)
 228 {
 229     uint32_t boff;
 230     uint8_t *p;
 231     uint8_t cmd;
 232
 233     cmd = value;
 234     if (pfl->cmd != 0xA0 && cmd == 0xF0) {
 235 #if 0
 236         DPRINTF("%s: flash reset asked (%02x %02x)\n",
 237                 __func__, pfl->cmd, cmd);
 238 #endif
 239         goto reset_flash;
 240     }
 241     DPRINTF("%s: offset " TARGET_FMT_lx " %08x %d %d\n", __func__,
 242             offset, value, width, pfl->wcycle);
 243     offset &= pfl->chip_len - 1;
 244
 245     DPRINTF("%s: offset " TARGET_FMT_lx " %08x %d\n", __func__,
 246             offset, value, width);
 247     boff = offset & (pfl->sector_len - 1);
 248     if (pfl->width == 2)
 249         boff = boff >> 1;
 250     else if (pfl->width == 4)
 251         boff = boff >> 2;
 252     switch (pfl->wcycle) {
 253     case 0:
 254         /* Set the device in I/O access mode if required */
 255         if (pfl->rom_mode)
 256             pflash_register_memory(pfl, 0);
 257         /* We're in read mode */
 258     check_unlock0:
 259         if (boff == 0x55 && cmd == 0x98) {
 260         enter_CFI_mode:
 261             /* Enter CFI query mode */
 262             pfl->wcycle = 7;
 263             pfl->cmd = 0x98;
 264             return;
 265         }
 266         if (boff != pfl->unlock_addr[0] || cmd != 0xAA) {
 267             DPRINTF("%s: unlock0 failed " TARGET_FMT_lx " %02x %04x\n",
 268                     __func__, boff, cmd, pfl->unlock_addr[0]);
 269             goto reset_flash;
 270         }
 271         DPRINTF("%s: unlock sequence started\n", __func__);
 272         break;
 273     case 1:
 274         /* We started an unlock sequence */
 275     check_unlock1:
 276         if (boff != pfl->unlock_addr[1] || cmd != 0x55) {
 277             DPRINTF("%s: unlock1 failed " TARGET_FMT_lx " %02x\n", __func__,
 278                     boff, cmd);
 279             goto reset_flash;
 280         }
 281         DPRINTF("%s: unlock sequence done\n", __func__);
 282         break;
 283     case 2:
 284         /* We finished an unlock sequence */
 285         if (!pfl->bypass && boff != pfl->unlock_addr[0]) {
 286             DPRINTF("%s: command failed " TARGET_FMT_lx " %02x\n", __func__,
 287                     boff, cmd);
 288             goto reset_flash;
 289         }
 290         switch (cmd) {
 291         case 0x20:
 292             pfl->bypass = 1;
 293             goto do_bypass;
 294         case 0x80:
 295         case 0x90:
 296         case 0xA0:
 297             pfl->cmd = cmd;
 298             DPRINTF("%s: starting command %02x\n", __func__, cmd);
 299             break;
 300         default:
 301             DPRINTF("%s: unknown command %02x\n", __func__, cmd);
 302             goto reset_flash;
 303         }
 304         break;
 305     case 3:
 306         switch (pfl->cmd) {
 307         case 0x80:
 308             /* We need another unlock sequence */
 309             goto check_unlock0;
 310         case 0xA0:
 311             DPRINTF("%s: write data offset " TARGET_FMT_lx " %08x %d\n",
 312                     __func__, offset, value, width);
 313             p = pfl->storage;
 314             switch (width) {
 315             case 1:
 316                 p[offset] &= value;
 317                 pflash_update(pfl, offset, 1);
 318                 break;
 319             case 2:
 320 #if defined(TARGET_WORDS_BIGENDIAN)
 321                 p[offset] &= value >> 8;
 322                 p[offset + 1] &= value;
 323 #else
 324                 p[offset] &= value;
 325                 p[offset + 1] &= value >> 8;
 326 #endif
 327                 pflash_update(pfl, offset, 2);
 328                 break;
 329             case 4:
 330 #if defined(TARGET_WORDS_BIGENDIAN)
 331                 p[offset] &= value >> 24;
 332                 p[offset + 1] &= value >> 16;
 333                 p[offset + 2] &= value >> 8;
 334                 p[offset + 3] &= value;
 335 #else
 336                 p[offset] &= value;
 337                 p[offset + 1] &= value >> 8;
 338                 p[offset + 2] &= value >> 16;
 339                 p[offset + 3] &= value >> 24;
 340 #endif
 341                 pflash_update(pfl, offset, 4);
 342                 break;
 343             }
 344             pfl->status = 0x00 | ~(value & 0x80);
 345             /* Let's pretend write is immediate */
 346             if (pfl->bypass)
 347                 goto do_bypass;
 348             goto reset_flash;
 349         case 0x90:
 350             if (pfl->bypass && cmd == 0x00) {
 351                 /* Unlock bypass reset */
 352                 goto reset_flash;
 353             }
 354             /* We can enter CFI query mode from autoselect mode */
 355             if (boff == 0x55 && cmd == 0x98)
 356                 goto enter_CFI_mode;
 357             /* No break here */
 358         default:
 359             DPRINTF("%s: invalid write for command %02x\n",
 360                     __func__, pfl->cmd);
 361             goto reset_flash;
 362         }
 363     case 4:
 364         switch (pfl->cmd) {
 365         case 0xA0:
 366             /* Ignore writes while flash data write is occuring */
 367             /* As we suppose write is immediate, this should never happen */
 368             return;
 369         case 0x80:
 370             goto check_unlock1;
 371         default:
 372             /* Should never happen */
 373             DPRINTF("%s: invalid command state %02x (wc 4)\n",
 374                     __func__, pfl->cmd);
 375             goto reset_flash;
 376         }
 377         break;
 378     case 5:
 379         switch (cmd) {
 380         case 0x10:
 381             if (boff != pfl->unlock_addr[0]) {
 382                 DPRINTF("%s: chip erase: invalid address " TARGET_FMT_lx "\n",
 383                         __func__, offset);
 384                 goto reset_flash;
 385             }
 386             /* Chip erase */
 387             DPRINTF("%s: start chip erase\n", __func__);
 388             memset(pfl->storage, 0xFF, pfl->chip_len);
 389             pfl->status = 0x00;
 390             pflash_update(pfl, 0, pfl->chip_len);
 391             /* Let's wait 5 seconds before chip erase is done */
 392             qemu_mod_timer(pfl->timer,
 393                            qemu_get_clock(vm_clock) + (ticks_per_sec * 5));
 394             break;
 395         case 0x30:
 396             /* Sector erase */
 397             p = pfl->storage;
 398             offset &= ~(pfl->sector_len - 1);
 399             DPRINTF("%s: start sector erase at " TARGET_FMT_lx "\n", __func__,
 400                     offset);
 401             memset(p + offset, 0xFF, pfl->sector_len);
 402             pflash_update(pfl, offset, pfl->sector_len);
 403             pfl->status = 0x00;
 404             /* Let's wait 1/2 second before sector erase is done */
 405             qemu_mod_timer(pfl->timer,
 406                            qemu_get_clock(vm_clock) + (ticks_per_sec / 2));
 407             break;
 408         default:
 409             DPRINTF("%s: invalid command %02x (wc 5)\n", __func__, cmd);
 410             goto reset_flash;
 411         }
 412         pfl->cmd = cmd;
 413         break;
 414     case 6:
 415         switch (pfl->cmd) {
 416         case 0x10:
 417             /* Ignore writes during chip erase */
 418             return;
 419         case 0x30:
 420             /* Ignore writes during sector erase */
 421             return;
 422         default:
 423             /* Should never happen */
 424             DPRINTF("%s: invalid command state %02x (wc 6)\n",
 425                     __func__, pfl->cmd);
 426             goto reset_flash;
 427         }
 428         break;
 429     case 7: /* Special value for CFI queries */
 430         DPRINTF("%s: invalid write in CFI query mode\n", __func__);
 431         goto reset_flash;
 432     default:
 433         /* Should never happen */
 434         DPRINTF("%s: invalid write state (wc 7)\n",  __func__);
 435         goto reset_flash;
 436     }
 437     pfl->wcycle++;
 438
 439     return;
 440
 441     /* Reset flash */
 442  reset_flash:
 443     pfl->bypass = 0;
 444     pfl->wcycle = 0;
 445     pfl->cmd = 0;
 446     return;
 447
 448  do_bypass:
 449     pfl->wcycle = 2;
 450     pfl->cmd = 0;
 451     return;
 452 }
 453
 454
 455 static uint32_t pflash_readb (void *opaque, target_phys_addr_t addr)
 456 {
 457     return pflash_read(opaque, addr, 1);
 458 }
 459
 460 static uint32_t pflash_readw (void *opaque, target_phys_addr_t addr)
 461 {
 462     pflash_t *pfl = opaque;
 463
 464     return pflash_read(pfl, addr, 2);
 465 }
 466
 467 static uint32_t pflash_readl (void *opaque, target_phys_addr_t addr)
 468 {
 469     pflash_t *pfl = opaque;
 470
 471     return pflash_read(pfl, addr, 4);
 472 }
 473
 474 static void pflash_writeb (void *opaque, target_phys_addr_t addr,
 475                            uint32_t value)
 476 {
 477     pflash_write(opaque, addr, value, 1);
 478 }
 479
 480 static void pflash_writew (void *opaque, target_phys_addr_t addr,
 481                            uint32_t value)
 482 {
 483     pflash_t *pfl = opaque;
 484
 485     pflash_write(pfl, addr, value, 2);
 486 }
 487
 488 static void pflash_writel (void *opaque, target_phys_addr_t addr,
 489                            uint32_t value)
 490 {
 491     pflash_t *pfl = opaque;
 492
 493     pflash_write(pfl, addr, value, 4);
 494 }
 495
 496 static CPUWriteMemoryFunc *pflash_write_ops[] = {
 497     &pflash_writeb,
 498     &pflash_writew,
 499     &pflash_writel,
 500 };
 501
 502 static CPUReadMemoryFunc *pflash_read_ops[] = {
 503     &pflash_readb,
 504     &pflash_readw,
 505     &pflash_readl,
 506 };
 507
 508 /* Count trailing zeroes of a 32 bits quantity */
 509 static int ctz32 (uint32_t n)
 510 {
 511     int ret;
 512
 513     ret = 0;
 514     if (!(n & 0xFFFF)) {
 515         ret += 16;
 516         n = n >> 16;
 517     }
 518     if (!(n & 0xFF)) {
 519         ret += 8;
 520         n = n >> 8;
 521     }
 522     if (!(n & 0xF)) {
 523         ret += 4;
 524         n = n >> 4;
 525     }
 526     if (!(n & 0x3)) {
 527         ret += 2;
 528         n = n >> 2;
 529     }
 530     if (!(n & 0x1)) {
 531         ret++;
 532         n = n >> 1;
 533     }
 534 #if 0 /* This is not necessary as n is never 0 */
 535     if (!n)
 536         ret++;
 537 #endif
 538
 539     return ret;
 540 }
 541
 542 pflash_t *pflash_cfi02_register(target_phys_addr_t base, ram_addr_t off,
 543                                 BlockDriverState *bs, uint32_t sector_len,
 544                                 int nb_blocs, int nb_mappings, int width,
 545                                 uint16_t id0, uint16_t id1,
 546                                 uint16_t id2, uint16_t id3,
 547                                 uint16_t unlock_addr0, uint16_t unlock_addr1)
 548 {
 549     pflash_t *pfl;
 550     int32_t chip_len;
 551
 552     chip_len = sector_len * nb_blocs;
 553     /* XXX: to be fixed */
 554 #if 0
 555     if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
 556         total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
 557         return NULL;
 558 #endif
 559     pfl = qemu_mallocz(sizeof(pflash_t));
 560     /* FIXME: Allocate ram ourselves.  */
 561     pfl->storage = qemu_get_ram_ptr(off);
 562     pfl->fl_mem = cpu_register_io_memory(0, pflash_read_ops, pflash_write_ops,
 563                                          pfl);
 564     pfl->off = off;
 565     pfl->base = base;
 566     pfl->chip_len = chip_len;
 567     pfl->mappings = nb_mappings;
 568     pflash_register_memory(pfl, 1);
 569     pfl->bs = bs;
 570     if (pfl->bs) {
 571         /* read the initial flash content */
 572         bdrv_read(pfl->bs, 0, pfl->storage, chip_len >> 9);
 573     }
 574 #if 0 /* XXX: there should be a bit to set up read-only,
 575        *      the same way the hardware does (with WP pin).
 576        */
 577     pfl->ro = 1;
 578 #else
 579     pfl->ro = 0;
 580 #endif
 581     pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl);
 582     pfl->sector_len = sector_len;
 583     pfl->width = width;
 584     pfl->wcycle = 0;
 585     pfl->cmd = 0;
 586     pfl->status = 0;
 587     pfl->ident[0] = id0;
 588     pfl->ident[1] = id1;
 589     pfl->ident[2] = id2;
 590     pfl->ident[3] = id3;
 591     pfl->unlock_addr[0] = unlock_addr0;
 592     pfl->unlock_addr[1] = unlock_addr1;
 593     /* Hardcoded CFI table (mostly from SG29 Spansion flash) */
 594     pfl->cfi_len = 0x52;
 595     /* Standard "QRY" string */
 596     pfl->cfi_table[0x10] = 'Q';
 597     pfl->cfi_table[0x11] = 'R';
 598     pfl->cfi_table[0x12] = 'Y';
 599     /* Command set (AMD/Fujitsu) */
 600     pfl->cfi_table[0x13] = 0x02;
 601     pfl->cfi_table[0x14] = 0x00;
 602     /* Primary extended table address */
 603     pfl->cfi_table[0x15] = 0x31;
 604     pfl->cfi_table[0x16] = 0x00;
 605     /* Alternate command set (none) */
 606     pfl->cfi_table[0x17] = 0x00;
 607     pfl->cfi_table[0x18] = 0x00;
 608     /* Alternate extended table (none) */
 609     pfl->cfi_table[0x19] = 0x00;
 610     pfl->cfi_table[0x1A] = 0x00;
 611     /* Vcc min */
 612     pfl->cfi_table[0x1B] = 0x27;
 613     /* Vcc max */
 614     pfl->cfi_table[0x1C] = 0x36;
 615     /* Vpp min (no Vpp pin) */
 616     pfl->cfi_table[0x1D] = 0x00;
 617     /* Vpp max (no Vpp pin) */
 618     pfl->cfi_table[0x1E] = 0x00;
 619     /* Reserved */
 620     pfl->cfi_table[0x1F] = 0x07;
 621     /* Timeout for min size buffer write (NA) */
 622     pfl->cfi_table[0x20] = 0x00;
 623     /* Typical timeout for block erase (512 ms) */
 624     pfl->cfi_table[0x21] = 0x09;
 625     /* Typical timeout for full chip erase (4096 ms) */
 626     pfl->cfi_table[0x22] = 0x0C;
 627     /* Reserved */
 628     pfl->cfi_table[0x23] = 0x01;
 629     /* Max timeout for buffer write (NA) */
 630     pfl->cfi_table[0x24] = 0x00;
 631     /* Max timeout for block erase */
 632     pfl->cfi_table[0x25] = 0x0A;
 633     /* Max timeout for chip erase */
 634     pfl->cfi_table[0x26] = 0x0D;
 635     /* Device size */
 636     pfl->cfi_table[0x27] = ctz32(chip_len);
 637     /* Flash device interface (8 & 16 bits) */
 638     pfl->cfi_table[0x28] = 0x02;
 639     pfl->cfi_table[0x29] = 0x00;
 640     /* Max number of bytes in multi-bytes write */
 641     /* XXX: disable buffered write as it's not supported */
 642     //    pfl->cfi_table[0x2A] = 0x05;
 643     pfl->cfi_table[0x2A] = 0x00;
 644     pfl->cfi_table[0x2B] = 0x00;
 645     /* Number of erase block regions (uniform) */
 646     pfl->cfi_table[0x2C] = 0x01;
 647     /* Erase block region 1 */
 648     pfl->cfi_table[0x2D] = nb_blocs - 1;
 649     pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8;
 650     pfl->cfi_table[0x2F] = sector_len >> 8;
 651     pfl->cfi_table[0x30] = sector_len >> 16;
 652
 653     /* Extended */
 654     pfl->cfi_table[0x31] = 'P';
 655     pfl->cfi_table[0x32] = 'R';
 656     pfl->cfi_table[0x33] = 'I';
 657
 658     pfl->cfi_table[0x34] = '1';
 659     pfl->cfi_table[0x35] = '0';
 660
 661     pfl->cfi_table[0x36] = 0x00;
 662     pfl->cfi_table[0x37] = 0x00;
 663     pfl->cfi_table[0x38] = 0x00;
 664     pfl->cfi_table[0x39] = 0x00;
 665
 666     pfl->cfi_table[0x3a] = 0x00;
 667
 668     pfl->cfi_table[0x3b] = 0x00;
 669     pfl->cfi_table[0x3c] = 0x00;
 670
 671     return pfl;
 672 }