hw/slavio_serial.c

   1 /*
   2  * QEMU Sparc SLAVIO serial port emulation
   3  *
   4  * Copyright (c) 2003-2005 Fabrice Bellard
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24 #include "hw.h"
  25 #include "sun4m.h"
  26 #include "qemu-char.h"
  27 #include "console.h"
  28
  29 /* debug serial */
  30 //#define DEBUG_SERIAL
  31
  32 /* debug keyboard */
  33 //#define DEBUG_KBD
  34
  35 /* debug mouse */
  36 //#define DEBUG_MOUSE
  37
  38 /*
  39  * This is the serial port, mouse and keyboard part of chip STP2001
  40  * (Slave I/O), also produced as NCR89C105. See
  41  * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt
  42  *
  43  * The serial ports implement full AMD AM8530 or Zilog Z8530 chips,
  44  * mouse and keyboard ports don't implement all functions and they are
  45  * only asynchronous. There is no DMA.
  46  *
  47  */
  48
  49 /*
  50  * Modifications:
  51  *  2006-Aug-10  Igor Kovalenko :   Renamed KBDQueue to SERIOQueue, implemented
  52  *                                  serial mouse queue.
  53  *                                  Implemented serial mouse protocol.
  54  */
  55
  56 #ifdef DEBUG_SERIAL
  57 #define SER_DPRINTF(fmt, args...) \
  58 do { printf("SER: " fmt , ##args); } while (0)
  59 #else
  60 #define SER_DPRINTF(fmt, args...)
  61 #endif
  62 #ifdef DEBUG_KBD
  63 #define KBD_DPRINTF(fmt, args...) \
  64 do { printf("KBD: " fmt , ##args); } while (0)
  65 #else
  66 #define KBD_DPRINTF(fmt, args...)
  67 #endif
  68 #ifdef DEBUG_MOUSE
  69 #define MS_DPRINTF(fmt, args...) \
  70 do { printf("MSC: " fmt , ##args); } while (0)
  71 #else
  72 #define MS_DPRINTF(fmt, args...)
  73 #endif
  74
  75 typedef enum {
  76     chn_a, chn_b,
  77 } chn_id_t;
  78
  79 #define CHN_C(s) ((s)->chn == chn_b? 'b' : 'a')
  80
  81 typedef enum {
  82     ser, kbd, mouse,
  83 } chn_type_t;
  84
  85 #define SERIO_QUEUE_SIZE 256
  86
  87 typedef struct {
  88     uint8_t data[SERIO_QUEUE_SIZE];
  89     int rptr, wptr, count;
  90 } SERIOQueue;
  91
  92 #define SERIAL_REGS 16
  93 typedef struct ChannelState {
  94     qemu_irq irq;
  95     int reg;
  96     int rxint, txint, rxint_under_svc, txint_under_svc;
  97     chn_id_t chn; // this channel, A (base+4) or B (base+0)
  98     chn_type_t type;
  99     struct ChannelState *otherchn;
 100     uint8_t rx, tx, wregs[SERIAL_REGS], rregs[SERIAL_REGS];
 101     SERIOQueue queue;
 102     CharDriverState *chr;
 103     int e0_mode, led_mode, caps_lock_mode, num_lock_mode;
 104     int disabled;
 105 } ChannelState;
 106
 107 struct SerialState {
 108     struct ChannelState chn[2];
 109 };
 110
 111 #define SERIAL_MAXADDR 7
 112 #define SERIAL_SIZE (SERIAL_MAXADDR + 1)
 113 #define SERIAL_CTRL 0
 114 #define SERIAL_DATA 1
 115
 116 #define W_CMD     0
 117 #define CMD_PTR_MASK   0x07
 118 #define CMD_CMD_MASK   0x38
 119 #define CMD_HI         0x08
 120 #define CMD_CLR_TXINT  0x28
 121 #define CMD_CLR_IUS    0x38
 122 #define W_INTR    1
 123 #define INTR_INTALL    0x01
 124 #define INTR_TXINT     0x02
 125 #define INTR_RXMODEMSK 0x18
 126 #define INTR_RXINT1ST  0x08
 127 #define INTR_RXINTALL  0x10
 128 #define W_IVEC    2
 129 #define W_RXCTRL  3
 130 #define RXCTRL_RXEN    0x01
 131 #define W_TXCTRL1 4
 132 #define TXCTRL1_PAREN  0x01
 133 #define TXCTRL1_PAREV  0x02
 134 #define TXCTRL1_1STOP  0x04
 135 #define TXCTRL1_1HSTOP 0x08
 136 #define TXCTRL1_2STOP  0x0c
 137 #define TXCTRL1_STPMSK 0x0c
 138 #define TXCTRL1_CLK1X  0x00
 139 #define TXCTRL1_CLK16X 0x40
 140 #define TXCTRL1_CLK32X 0x80
 141 #define TXCTRL1_CLK64X 0xc0
 142 #define TXCTRL1_CLKMSK 0xc0
 143 #define W_TXCTRL2 5
 144 #define TXCTRL2_TXEN   0x08
 145 #define TXCTRL2_BITMSK 0x60
 146 #define TXCTRL2_5BITS  0x00
 147 #define TXCTRL2_7BITS  0x20
 148 #define TXCTRL2_6BITS  0x40
 149 #define TXCTRL2_8BITS  0x60
 150 #define W_SYNC1   6
 151 #define W_SYNC2   7
 152 #define W_TXBUF   8
 153 #define W_MINTR   9
 154 #define MINTR_STATUSHI 0x10
 155 #define MINTR_RST_MASK 0xc0
 156 #define MINTR_RST_B    0x40
 157 #define MINTR_RST_A    0x80
 158 #define MINTR_RST_ALL  0xc0
 159 #define W_MISC1  10
 160 #define W_CLOCK  11
 161 #define CLOCK_TRXC     0x08
 162 #define W_BRGLO  12
 163 #define W_BRGHI  13
 164 #define W_MISC2  14
 165 #define MISC2_PLLDIS   0x30
 166 #define W_EXTINT 15
 167 #define EXTINT_DCD     0x08
 168 #define EXTINT_SYNCINT 0x10
 169 #define EXTINT_CTSINT  0x20
 170 #define EXTINT_TXUNDRN 0x40
 171 #define EXTINT_BRKINT  0x80
 172
 173 #define R_STATUS  0
 174 #define STATUS_RXAV    0x01
 175 #define STATUS_ZERO    0x02
 176 #define STATUS_TXEMPTY 0x04
 177 #define STATUS_DCD     0x08
 178 #define STATUS_SYNC    0x10
 179 #define STATUS_CTS     0x20
 180 #define STATUS_TXUNDRN 0x40
 181 #define STATUS_BRK     0x80
 182 #define R_SPEC    1
 183 #define SPEC_ALLSENT   0x01
 184 #define SPEC_BITS8     0x06
 185 #define R_IVEC    2
 186 #define IVEC_TXINTB    0x00
 187 #define IVEC_LONOINT   0x06
 188 #define IVEC_LORXINTA  0x0c
 189 #define IVEC_LORXINTB  0x04
 190 #define IVEC_LOTXINTA  0x08
 191 #define IVEC_HINOINT   0x60
 192 #define IVEC_HIRXINTA  0x30
 193 #define IVEC_HIRXINTB  0x20
 194 #define IVEC_HITXINTA  0x10
 195 #define R_INTR    3
 196 #define INTR_EXTINTB   0x01
 197 #define INTR_TXINTB    0x02
 198 #define INTR_RXINTB    0x04
 199 #define INTR_EXTINTA   0x08
 200 #define INTR_TXINTA    0x10
 201 #define INTR_RXINTA    0x20
 202 #define R_IPEN    4
 203 #define R_TXCTRL1 5
 204 #define R_TXCTRL2 6
 205 #define R_BC      7
 206 #define R_RXBUF   8
 207 #define R_RXCTRL  9
 208 #define R_MISC   10
 209 #define R_MISC1  11
 210 #define R_BRGLO  12
 211 #define R_BRGHI  13
 212 #define R_MISC1I 14
 213 #define R_EXTINT 15
 214
 215 static void handle_kbd_command(ChannelState *s, int val);
 216 static int serial_can_receive(void *opaque);
 217 static void serial_receive_byte(ChannelState *s, int ch);
 218
 219 static void clear_queue(void *opaque)
 220 {
 221     ChannelState *s = opaque;
 222     SERIOQueue *q = &s->queue;
 223     q->rptr = q->wptr = q->count = 0;
 224 }
 225
 226 static void put_queue(void *opaque, int b)
 227 {
 228     ChannelState *s = opaque;
 229     SERIOQueue *q = &s->queue;
 230
 231     SER_DPRINTF("channel %c put: 0x%02x\n", CHN_C(s), b);
 232     if (q->count >= SERIO_QUEUE_SIZE)
 233         return;
 234     q->data[q->wptr] = b;
 235     if (++q->wptr == SERIO_QUEUE_SIZE)
 236         q->wptr = 0;
 237     q->count++;
 238     serial_receive_byte(s, 0);
 239 }
 240
 241 static uint32_t get_queue(void *opaque)
 242 {
 243     ChannelState *s = opaque;
 244     SERIOQueue *q = &s->queue;
 245     int val;
 246
 247     if (q->count == 0) {
 248         return 0;
 249     } else {
 250         val = q->data[q->rptr];
 251         if (++q->rptr == SERIO_QUEUE_SIZE)
 252             q->rptr = 0;
 253         q->count--;
 254     }
 255     SER_DPRINTF("channel %c get 0x%02x\n", CHN_C(s), val);
 256     if (q->count > 0)
 257         serial_receive_byte(s, 0);
 258     return val;
 259 }
 260
 261 static int slavio_serial_update_irq_chn(ChannelState *s)
 262 {
 263     if ((s->wregs[W_INTR] & INTR_INTALL) && // interrupts enabled
 264         (((s->wregs[W_INTR] & INTR_TXINT) && s->txint == 1) ||
 265          // tx ints enabled, pending
 266          ((((s->wregs[W_INTR] & INTR_RXMODEMSK) == INTR_RXINT1ST) ||
 267            ((s->wregs[W_INTR] & INTR_RXMODEMSK) == INTR_RXINTALL)) &&
 268           s->rxint == 1) || // rx ints enabled, pending
 269          ((s->wregs[W_EXTINT] & EXTINT_BRKINT) &&
 270           (s->rregs[R_STATUS] & STATUS_BRK)))) { // break int e&p
 271         return 1;
 272     }
 273     return 0;
 274 }
 275
 276 static void slavio_serial_update_irq(ChannelState *s)
 277 {
 278     int irq;
 279
 280     irq = slavio_serial_update_irq_chn(s);
 281     irq |= slavio_serial_update_irq_chn(s->otherchn);
 282
 283     SER_DPRINTF("IRQ = %d\n", irq);
 284     qemu_set_irq(s->irq, irq);
 285 }
 286
 287 static void slavio_serial_reset_chn(ChannelState *s)
 288 {
 289     int i;
 290
 291     s->reg = 0;
 292     for (i = 0; i < SERIAL_SIZE; i++) {
 293         s->rregs[i] = 0;
 294         s->wregs[i] = 0;
 295     }
 296     s->wregs[W_TXCTRL1] = TXCTRL1_1STOP; // 1X divisor, 1 stop bit, no parity
 297     s->wregs[W_MINTR] = MINTR_RST_ALL;
 298     s->wregs[W_CLOCK] = CLOCK_TRXC; // Synch mode tx clock = TRxC
 299     s->wregs[W_MISC2] = MISC2_PLLDIS; // PLL disabled
 300     s->wregs[W_EXTINT] = EXTINT_DCD | EXTINT_SYNCINT | EXTINT_CTSINT |
 301         EXTINT_TXUNDRN | EXTINT_BRKINT; // Enable most interrupts
 302     if (s->disabled)
 303         s->rregs[R_STATUS] = STATUS_TXEMPTY | STATUS_DCD | STATUS_SYNC |
 304             STATUS_CTS | STATUS_TXUNDRN;
 305     else
 306         s->rregs[R_STATUS] = STATUS_TXEMPTY | STATUS_TXUNDRN;
 307     s->rregs[R_SPEC] = SPEC_BITS8 | SPEC_ALLSENT;
 308
 309     s->rx = s->tx = 0;
 310     s->rxint = s->txint = 0;
 311     s->rxint_under_svc = s->txint_under_svc = 0;
 312     s->e0_mode = s->led_mode = s->caps_lock_mode = s->num_lock_mode = 0;
 313     clear_queue(s);
 314 }
 315
 316 static void slavio_serial_reset(void *opaque)
 317 {
 318     SerialState *s = opaque;
 319     slavio_serial_reset_chn(&s->chn[0]);
 320     slavio_serial_reset_chn(&s->chn[1]);
 321 }
 322
 323 static inline void set_rxint(ChannelState *s)
 324 {
 325     s->rxint = 1;
 326     if (!s->txint_under_svc) {
 327         s->rxint_under_svc = 1;
 328         if (s->chn == chn_a) {
 329             if (s->wregs[W_MINTR] & MINTR_STATUSHI)
 330                 s->otherchn->rregs[R_IVEC] = IVEC_HIRXINTA;
 331             else
 332                 s->otherchn->rregs[R_IVEC] = IVEC_LORXINTA;
 333         } else {
 334             if (s->wregs[W_MINTR] & MINTR_STATUSHI)
 335                 s->rregs[R_IVEC] = IVEC_HIRXINTB;
 336             else
 337                 s->rregs[R_IVEC] = IVEC_LORXINTB;
 338         }
 339     }
 340     if (s->chn == chn_a)
 341         s->rregs[R_INTR] |= INTR_RXINTA;
 342     else
 343         s->otherchn->rregs[R_INTR] |= INTR_RXINTB;
 344     slavio_serial_update_irq(s);
 345 }
 346
 347 static inline void set_txint(ChannelState *s)
 348 {
 349     s->txint = 1;
 350     if (!s->rxint_under_svc) {
 351         s->txint_under_svc = 1;
 352         if (s->chn == chn_a) {
 353             if (s->wregs[W_MINTR] & MINTR_STATUSHI)
 354                 s->otherchn->rregs[R_IVEC] = IVEC_HITXINTA;
 355             else
 356                 s->otherchn->rregs[R_IVEC] = IVEC_LOTXINTA;
 357         } else {
 358             s->rregs[R_IVEC] = IVEC_TXINTB;
 359         }
 360     }
 361     if (s->chn == chn_a)
 362         s->rregs[R_INTR] |= INTR_TXINTA;
 363     else
 364         s->otherchn->rregs[R_INTR] |= INTR_TXINTB;
 365     slavio_serial_update_irq(s);
 366 }
 367
 368 static inline void clr_rxint(ChannelState *s)
 369 {
 370     s->rxint = 0;
 371     s->rxint_under_svc = 0;
 372     if (s->chn == chn_a) {
 373         if (s->wregs[W_MINTR] & MINTR_STATUSHI)
 374             s->otherchn->rregs[R_IVEC] = IVEC_HINOINT;
 375         else
 376             s->otherchn->rregs[R_IVEC] = IVEC_LONOINT;
 377         s->rregs[R_INTR] &= ~INTR_RXINTA;
 378     } else {
 379         if (s->wregs[W_MINTR] & MINTR_STATUSHI)
 380             s->rregs[R_IVEC] = IVEC_HINOINT;
 381         else
 382             s->rregs[R_IVEC] = IVEC_LONOINT;
 383         s->otherchn->rregs[R_INTR] &= ~INTR_RXINTB;
 384     }
 385     if (s->txint)
 386         set_txint(s);
 387     slavio_serial_update_irq(s);
 388 }
 389
 390 static inline void clr_txint(ChannelState *s)
 391 {
 392     s->txint = 0;
 393     s->txint_under_svc = 0;
 394     if (s->chn == chn_a) {
 395         if (s->wregs[W_MINTR] & MINTR_STATUSHI)
 396             s->otherchn->rregs[R_IVEC] = IVEC_HINOINT;
 397         else
 398             s->otherchn->rregs[R_IVEC] = IVEC_LONOINT;
 399         s->rregs[R_INTR] &= ~INTR_TXINTA;
 400     } else {
 401         if (s->wregs[W_MINTR] & MINTR_STATUSHI)
 402             s->rregs[R_IVEC] = IVEC_HINOINT;
 403         else
 404             s->rregs[R_IVEC] = IVEC_LONOINT;
 405         s->otherchn->rregs[R_INTR] &= ~INTR_TXINTB;
 406     }
 407     if (s->rxint)
 408         set_rxint(s);
 409     slavio_serial_update_irq(s);
 410 }
 411
 412 static void slavio_serial_update_parameters(ChannelState *s)
 413 {
 414     int speed, parity, data_bits, stop_bits;
 415     QEMUSerialSetParams ssp;
 416
 417     if (!s->chr || s->type != ser)
 418         return;
 419
 420     if (s->wregs[W_TXCTRL1] & TXCTRL1_PAREN) {
 421         if (s->wregs[W_TXCTRL1] & TXCTRL1_PAREV)
 422             parity = 'E';
 423         else
 424             parity = 'O';
 425     } else {
 426         parity = 'N';
 427     }
 428     if ((s->wregs[W_TXCTRL1] & TXCTRL1_STPMSK) == TXCTRL1_2STOP)
 429         stop_bits = 2;
 430     else
 431         stop_bits = 1;
 432     switch (s->wregs[W_TXCTRL2] & TXCTRL2_BITMSK) {
 433     case TXCTRL2_5BITS:
 434         data_bits = 5;
 435         break;
 436     case TXCTRL2_7BITS:
 437         data_bits = 7;
 438         break;
 439     case TXCTRL2_6BITS:
 440         data_bits = 6;
 441         break;
 442     default:
 443     case TXCTRL2_8BITS:
 444         data_bits = 8;
 445         break;
 446     }
 447     speed = 2457600 / ((s->wregs[W_BRGLO] | (s->wregs[W_BRGHI] << 8)) + 2);
 448     switch (s->wregs[W_TXCTRL1] & TXCTRL1_CLKMSK) {
 449     case TXCTRL1_CLK1X:
 450         break;
 451     case TXCTRL1_CLK16X:
 452         speed /= 16;
 453         break;
 454     case TXCTRL1_CLK32X:
 455         speed /= 32;
 456         break;
 457     default:
 458     case TXCTRL1_CLK64X:
 459         speed /= 64;
 460         break;
 461     }
 462     ssp.speed = speed;
 463     ssp.parity = parity;
 464     ssp.data_bits = data_bits;
 465     ssp.stop_bits = stop_bits;
 466     SER_DPRINTF("channel %c: speed=%d parity=%c data=%d stop=%d\n", CHN_C(s),
 467                 speed, parity, data_bits, stop_bits);
 468     qemu_chr_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
 469 }
 470
 471 static void slavio_serial_mem_writeb(void *opaque, target_phys_addr_t addr,
 472                                      uint32_t val)
 473 {
 474     SerialState *serial = opaque;
 475     ChannelState *s;
 476     uint32_t saddr;
 477     int newreg, channel;
 478
 479     val &= 0xff;
 480     saddr = (addr & 3) >> 1;
 481     channel = (addr & SERIAL_MAXADDR) >> 2;
 482     s = &serial->chn[channel];
 483     switch (saddr) {
 484     case SERIAL_CTRL:
 485         SER_DPRINTF("Write channel %c, reg[%d] = %2.2x\n", CHN_C(s), s->reg,
 486                     val & 0xff);
 487         newreg = 0;
 488         switch (s->reg) {
 489         case W_CMD:
 490             newreg = val & CMD_PTR_MASK;
 491             val &= CMD_CMD_MASK;
 492             switch (val) {
 493             case CMD_HI:
 494                 newreg |= CMD_HI;
 495                 break;
 496             case CMD_CLR_TXINT:
 497                 clr_txint(s);
 498                 break;
 499             case CMD_CLR_IUS:
 500                 if (s->rxint_under_svc)
 501                     clr_rxint(s);
 502                 else if (s->txint_under_svc)
 503                     clr_txint(s);
 504                 break;
 505             default:
 506                 break;
 507             }
 508             break;
 509         case W_INTR ... W_RXCTRL:
 510         case W_SYNC1 ... W_TXBUF:
 511         case W_MISC1 ... W_CLOCK:
 512         case W_MISC2 ... W_EXTINT:
 513             s->wregs[s->reg] = val;
 514             break;
 515         case W_TXCTRL1:
 516         case W_TXCTRL2:
 517         case W_BRGLO:
 518         case W_BRGHI:
 519             s->wregs[s->reg] = val;
 520             slavio_serial_update_parameters(s);
 521             break;
 522         case W_MINTR:
 523             switch (val & MINTR_RST_MASK) {
 524             case 0:
 525             default:
 526                 break;
 527             case MINTR_RST_B:
 528                 slavio_serial_reset_chn(&serial->chn[1]);
 529                 return;
 530             case MINTR_RST_A:
 531                 slavio_serial_reset_chn(&serial->chn[0]);
 532                 return;
 533             case MINTR_RST_ALL:
 534                 slavio_serial_reset(serial);
 535                 return;
 536             }
 537             break;
 538         default:
 539             break;
 540         }
 541         if (s->reg == 0)
 542             s->reg = newreg;
 543         else
 544             s->reg = 0;
 545         break;
 546     case SERIAL_DATA:
 547         SER_DPRINTF("Write channel %c, ch %d\n", CHN_C(s), val);
 548         s->tx = val;
 549         if (s->wregs[W_TXCTRL2] & TXCTRL2_TXEN) { // tx enabled
 550             if (s->chr)
 551                 qemu_chr_write(s->chr, &s->tx, 1);
 552             else if (s->type == kbd && !s->disabled) {
 553                 handle_kbd_command(s, val);
 554             }
 555         }
 556         s->rregs[R_STATUS] |= STATUS_TXEMPTY; // Tx buffer empty
 557         s->rregs[R_SPEC] |= SPEC_ALLSENT; // All sent
 558         set_txint(s);
 559         break;
 560     default:
 561         break;
 562     }
 563 }
 564
 565 static uint32_t slavio_serial_mem_readb(void *opaque, target_phys_addr_t addr)
 566 {
 567     SerialState *serial = opaque;
 568     ChannelState *s;
 569     uint32_t saddr;
 570     uint32_t ret;
 571     int channel;
 572
 573     saddr = (addr & 3) >> 1;
 574     channel = (addr & SERIAL_MAXADDR) >> 2;
 575     s = &serial->chn[channel];
 576     switch (saddr) {
 577     case SERIAL_CTRL:
 578         SER_DPRINTF("Read channel %c, reg[%d] = %2.2x\n", CHN_C(s), s->reg,
 579                     s->rregs[s->reg]);
 580         ret = s->rregs[s->reg];
 581         s->reg = 0;
 582         return ret;
 583     case SERIAL_DATA:
 584         s->rregs[R_STATUS] &= ~STATUS_RXAV;
 585         clr_rxint(s);
 586         if (s->type == kbd || s->type == mouse)
 587             ret = get_queue(s);
 588         else
 589             ret = s->rx;
 590         SER_DPRINTF("Read channel %c, ch %d\n", CHN_C(s), ret);
 591         if (s->chr)
 592             qemu_chr_accept_input(s->chr);
 593         return ret;
 594     default:
 595         break;
 596     }
 597     return 0;
 598 }
 599
 600 static int serial_can_receive(void *opaque)
 601 {
 602     ChannelState *s = opaque;
 603     int ret;
 604
 605     if (((s->wregs[W_RXCTRL] & RXCTRL_RXEN) == 0) // Rx not enabled
 606         || ((s->rregs[R_STATUS] & STATUS_RXAV) == STATUS_RXAV))
 607         // char already available
 608         ret = 0;
 609     else
 610         ret = 1;
 611     return ret;
 612 }
 613
 614 static void serial_receive_byte(ChannelState *s, int ch)
 615 {
 616     SER_DPRINTF("channel %c put ch %d\n", CHN_C(s), ch);
 617     s->rregs[R_STATUS] |= STATUS_RXAV;
 618     s->rx = ch;
 619     set_rxint(s);
 620 }
 621
 622 static void serial_receive_break(ChannelState *s)
 623 {
 624     s->rregs[R_STATUS] |= STATUS_BRK;
 625     slavio_serial_update_irq(s);
 626 }
 627
 628 static void serial_receive1(void *opaque, const uint8_t *buf, int size)
 629 {
 630     ChannelState *s = opaque;
 631     serial_receive_byte(s, buf[0]);
 632 }
 633
 634 static void serial_event(void *opaque, int event)
 635 {
 636     ChannelState *s = opaque;
 637     if (event == CHR_EVENT_BREAK)
 638         serial_receive_break(s);
 639 }
 640
 641 static CPUReadMemoryFunc *slavio_serial_mem_read[3] = {
 642     slavio_serial_mem_readb,
 643     NULL,
 644     NULL,
 645 };
 646
 647 static CPUWriteMemoryFunc *slavio_serial_mem_write[3] = {
 648     slavio_serial_mem_writeb,
 649     NULL,
 650     NULL,
 651 };
 652
 653 static void slavio_serial_save_chn(QEMUFile *f, ChannelState *s)
 654 {
 655     int tmp;
 656     tmp = 0;
 657     qemu_put_be32s(f, &tmp); /* unused, was IRQ.  */
 658     qemu_put_be32s(f, &s->reg);
 659     qemu_put_be32s(f, &s->rxint);
 660     qemu_put_be32s(f, &s->txint);
 661     qemu_put_be32s(f, &s->rxint_under_svc);
 662     qemu_put_be32s(f, &s->txint_under_svc);
 663     qemu_put_8s(f, &s->rx);
 664     qemu_put_8s(f, &s->tx);
 665     qemu_put_buffer(f, s->wregs, SERIAL_REGS);
 666     qemu_put_buffer(f, s->rregs, SERIAL_REGS);
 667 }
 668
 669 static void slavio_serial_save(QEMUFile *f, void *opaque)
 670 {
 671     SerialState *s = opaque;
 672
 673     slavio_serial_save_chn(f, &s->chn[0]);
 674     slavio_serial_save_chn(f, &s->chn[1]);
 675 }
 676
 677 static int slavio_serial_load_chn(QEMUFile *f, ChannelState *s, int version_id)
 678 {
 679     int tmp;
 680
 681     if (version_id > 2)
 682         return -EINVAL;
 683
 684     qemu_get_be32s(f, &tmp); /* unused */
 685     qemu_get_be32s(f, &s->reg);
 686     qemu_get_be32s(f, &s->rxint);
 687     qemu_get_be32s(f, &s->txint);
 688     if (version_id >= 2) {
 689         qemu_get_be32s(f, &s->rxint_under_svc);
 690         qemu_get_be32s(f, &s->txint_under_svc);
 691     }
 692     qemu_get_8s(f, &s->rx);
 693     qemu_get_8s(f, &s->tx);
 694     qemu_get_buffer(f, s->wregs, SERIAL_REGS);
 695     qemu_get_buffer(f, s->rregs, SERIAL_REGS);
 696     return 0;
 697 }
 698
 699 static int slavio_serial_load(QEMUFile *f, void *opaque, int version_id)
 700 {
 701     SerialState *s = opaque;
 702     int ret;
 703
 704     ret = slavio_serial_load_chn(f, &s->chn[0], version_id);
 705     if (ret != 0)
 706         return ret;
 707     ret = slavio_serial_load_chn(f, &s->chn[1], version_id);
 708     return ret;
 709
 710 }
 711
 712 SerialState *slavio_serial_init(target_phys_addr_t base, qemu_irq irq,
 713                                 CharDriverState *chr1, CharDriverState *chr2)
 714 {
 715     int slavio_serial_io_memory, i;
 716     SerialState *s;
 717
 718     s = qemu_mallocz(sizeof(SerialState));
 719     if (!s)
 720         return NULL;
 721
 722     slavio_serial_io_memory = cpu_register_io_memory(0, slavio_serial_mem_read,
 723                                                      slavio_serial_mem_write,
 724                                                      s);
 725     cpu_register_physical_memory(base, SERIAL_SIZE, slavio_serial_io_memory);
 726
 727     s->chn[0].chr = chr1;
 728     s->chn[1].chr = chr2;
 729     s->chn[0].disabled = 0;
 730     s->chn[1].disabled = 0;
 731
 732     for (i = 0; i < 2; i++) {
 733         s->chn[i].irq = irq;
 734         s->chn[i].chn = 1 - i;
 735         s->chn[i].type = ser;
 736         if (s->chn[i].chr) {
 737             qemu_chr_add_handlers(s->chn[i].chr, serial_can_receive,
 738                                   serial_receive1, serial_event, &s->chn[i]);
 739         }
 740     }
 741     s->chn[0].otherchn = &s->chn[1];
 742     s->chn[1].otherchn = &s->chn[0];
 743     register_savevm("slavio_serial", base, 2, slavio_serial_save,
 744                     slavio_serial_load, s);
 745     qemu_register_reset(slavio_serial_reset, s);
 746     slavio_serial_reset(s);
 747     return s;
 748 }
 749
 750 static const uint8_t keycodes[128] = {
 751     127, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 43, 53,
 752     54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 89, 76, 77, 78,
 753     79, 80, 81, 82, 83, 84, 85, 86, 87, 42, 99, 88, 100, 101, 102, 103,
 754     104, 105, 106, 107, 108, 109, 110, 47, 19, 121, 119, 5, 6, 8, 10, 12,
 755     14, 16, 17, 18, 7, 98, 23, 68, 69, 70, 71, 91, 92, 93, 125, 112,
 756     113, 114, 94, 50, 0, 0, 124, 9, 11, 0, 0, 0, 0, 0, 0, 0,
 757     90, 0, 46, 22, 13, 111, 52, 20, 96, 24, 28, 74, 27, 123, 44, 66,
 758     0, 45, 2, 4, 48, 0, 0, 21, 0, 0, 0, 0, 0, 120, 122, 67,
 759 };
 760
 761 static const uint8_t e0_keycodes[128] = {
 762     0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 763     0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 90, 76, 0, 0,
 764     0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 765     0, 0, 0, 0, 0, 109, 0, 0, 13, 0, 0, 0, 0, 0, 0, 0,
 766     0, 0, 0, 0, 0, 0, 0, 68, 69, 70, 0, 91, 0, 93, 0, 112,
 767     113, 114, 94, 50, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 768     0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 769     0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 770 };
 771
 772 static void sunkbd_event(void *opaque, int ch)
 773 {
 774     ChannelState *s = opaque;
 775     int release = ch & 0x80;
 776
 777     KBD_DPRINTF("Untranslated keycode %2.2x (%s)\n", ch, release? "release" :
 778                 "press");
 779     switch (ch) {
 780     case 58: // Caps lock press
 781         s->caps_lock_mode ^= 1;
 782         if (s->caps_lock_mode == 2)
 783             return; // Drop second press
 784         break;
 785     case 69: // Num lock press
 786         s->num_lock_mode ^= 1;
 787         if (s->num_lock_mode == 2)
 788             return; // Drop second press
 789         break;
 790     case 186: // Caps lock release
 791         s->caps_lock_mode ^= 2;
 792         if (s->caps_lock_mode == 3)
 793             return; // Drop first release
 794         break;
 795     case 197: // Num lock release
 796         s->num_lock_mode ^= 2;
 797         if (s->num_lock_mode == 3)
 798             return; // Drop first release
 799         break;
 800     case 0xe0:
 801         s->e0_mode = 1;
 802         return;
 803     default:
 804         break;
 805     }
 806     if (s->e0_mode) {
 807         s->e0_mode = 0;
 808         ch = e0_keycodes[ch & 0x7f];
 809     } else {
 810         ch = keycodes[ch & 0x7f];
 811     }
 812     KBD_DPRINTF("Translated keycode %2.2x\n", ch);
 813     put_queue(s, ch | release);
 814 }
 815
 816 static void handle_kbd_command(ChannelState *s, int val)
 817 {
 818     KBD_DPRINTF("Command %d\n", val);
 819     if (s->led_mode) { // Ignore led byte
 820         s->led_mode = 0;
 821         return;
 822     }
 823     switch (val) {
 824     case 1: // Reset, return type code
 825         clear_queue(s);
 826         put_queue(s, 0xff);
 827         put_queue(s, 4); // Type 4
 828         put_queue(s, 0x7f);
 829         break;
 830     case 0xe: // Set leds
 831         s->led_mode = 1;
 832         break;
 833     case 7: // Query layout
 834     case 0xf:
 835         clear_queue(s);
 836         put_queue(s, 0xfe);
 837         put_queue(s, 0); // XXX, layout?
 838         break;
 839     default:
 840         break;
 841     }
 842 }
 843
 844 static void sunmouse_event(void *opaque,
 845                                int dx, int dy, int dz, int buttons_state)
 846 {
 847     ChannelState *s = opaque;
 848     int ch;
 849
 850     MS_DPRINTF("dx=%d dy=%d buttons=%01x\n", dx, dy, buttons_state);
 851
 852     ch = 0x80 | 0x7; /* protocol start byte, no buttons pressed */
 853
 854     if (buttons_state & MOUSE_EVENT_LBUTTON)
 855         ch ^= 0x4;
 856     if (buttons_state & MOUSE_EVENT_MBUTTON)
 857         ch ^= 0x2;
 858     if (buttons_state & MOUSE_EVENT_RBUTTON)
 859         ch ^= 0x1;
 860
 861     put_queue(s, ch);
 862
 863     ch = dx;
 864
 865     if (ch > 127)
 866         ch=127;
 867     else if (ch < -127)
 868         ch=-127;
 869
 870     put_queue(s, ch & 0xff);
 871
 872     ch = -dy;
 873
 874     if (ch > 127)
 875         ch=127;
 876     else if (ch < -127)
 877         ch=-127;
 878
 879     put_queue(s, ch & 0xff);
 880
 881     // MSC protocol specify two extra motion bytes
 882
 883     put_queue(s, 0);
 884     put_queue(s, 0);
 885 }
 886
 887 void slavio_serial_ms_kbd_init(target_phys_addr_t base, qemu_irq irq,
 888                                int disabled)
 889 {
 890     int slavio_serial_io_memory, i;
 891     SerialState *s;
 892
 893     s = qemu_mallocz(sizeof(SerialState));
 894     if (!s)
 895         return;
 896     for (i = 0; i < 2; i++) {
 897         s->chn[i].irq = irq;
 898         s->chn[i].chn = 1 - i;
 899         s->chn[i].chr = NULL;
 900     }
 901     s->chn[0].otherchn = &s->chn[1];
 902     s->chn[1].otherchn = &s->chn[0];
 903     s->chn[0].type = mouse;
 904     s->chn[1].type = kbd;
 905     s->chn[0].disabled = disabled;
 906     s->chn[1].disabled = disabled;
 907
 908     slavio_serial_io_memory = cpu_register_io_memory(0, slavio_serial_mem_read,
 909                                                      slavio_serial_mem_write,
 910                                                      s);
 911     cpu_register_physical_memory(base, SERIAL_SIZE, slavio_serial_io_memory);
 912
 913     qemu_add_mouse_event_handler(sunmouse_event, &s->chn[0], 0,
 914                                  "QEMU Sun Mouse");
 915     qemu_add_kbd_event_handler(sunkbd_event, &s->chn[1]);
 916     register_savevm("slavio_serial_mouse", base, 2, slavio_serial_save,
 917                     slavio_serial_load, s);
 918     qemu_register_reset(slavio_serial_reset, s);
 919     slavio_serial_reset(s);
 920 }