2 * QEMU NE2000 emulation
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
29 /* debug NE2000 card */
30 //#define DEBUG_NE2000
32 #define MAX_ETH_FRAME_SIZE 1514
34 #define E8390_CMD 0x00 /* The command register (for all pages) */
35 /* Page 0 register offsets. */
36 #define EN0_CLDALO 0x01 /* Low byte of current local dma addr RD */
37 #define EN0_STARTPG 0x01 /* Starting page of ring bfr WR */
38 #define EN0_CLDAHI 0x02 /* High byte of current local dma addr RD */
39 #define EN0_STOPPG 0x02 /* Ending page +1 of ring bfr WR */
40 #define EN0_BOUNDARY 0x03 /* Boundary page of ring bfr RD WR */
41 #define EN0_TSR 0x04 /* Transmit status reg RD */
42 #define EN0_TPSR 0x04 /* Transmit starting page WR */
43 #define EN0_NCR 0x05 /* Number of collision reg RD */
44 #define EN0_TCNTLO 0x05 /* Low byte of tx byte count WR */
45 #define EN0_FIFO 0x06 /* FIFO RD */
46 #define EN0_TCNTHI 0x06 /* High byte of tx byte count WR */
47 #define EN0_ISR 0x07 /* Interrupt status reg RD WR */
48 #define EN0_CRDALO 0x08 /* low byte of current remote dma address RD */
49 #define EN0_RSARLO 0x08 /* Remote start address reg 0 */
50 #define EN0_CRDAHI 0x09 /* high byte, current remote dma address RD */
51 #define EN0_RSARHI 0x09 /* Remote start address reg 1 */
52 #define EN0_RCNTLO 0x0a /* Remote byte count reg WR */
53 #define EN0_RTL8029ID0 0x0a /* Realtek ID byte #1 RD */
54 #define EN0_RCNTHI 0x0b /* Remote byte count reg WR */
55 #define EN0_RTL8029ID1 0x0b /* Realtek ID byte #2 RD */
56 #define EN0_RSR 0x0c /* rx status reg RD */
57 #define EN0_RXCR 0x0c /* RX configuration reg WR */
58 #define EN0_TXCR 0x0d /* TX configuration reg WR */
59 #define EN0_COUNTER0 0x0d /* Rcv alignment error counter RD */
60 #define EN0_DCFG 0x0e /* Data configuration reg WR */
61 #define EN0_COUNTER1 0x0e /* Rcv CRC error counter RD */
62 #define EN0_IMR 0x0f /* Interrupt mask reg WR */
63 #define EN0_COUNTER2 0x0f /* Rcv missed frame error counter RD */
66 #define EN1_CURPAG 0x17
69 #define EN2_STARTPG 0x21 /* Starting page of ring bfr RD */
70 #define EN2_STOPPG 0x22 /* Ending page +1 of ring bfr RD */
72 #define EN3_CONFIG0 0x33
73 #define EN3_CONFIG1 0x34
74 #define EN3_CONFIG2 0x35
75 #define EN3_CONFIG3 0x36
77 /* Register accessed at EN_CMD, the 8390 base addr. */
78 #define E8390_STOP 0x01 /* Stop and reset the chip */
79 #define E8390_START 0x02 /* Start the chip, clear reset */
80 #define E8390_TRANS 0x04 /* Transmit a frame */
81 #define E8390_RREAD 0x08 /* Remote read */
82 #define E8390_RWRITE 0x10 /* Remote write */
83 #define E8390_NODMA 0x20 /* Remote DMA */
84 #define E8390_PAGE0 0x00 /* Select page chip registers */
85 #define E8390_PAGE1 0x40 /* using the two high-order bits */
86 #define E8390_PAGE2 0x80 /* Page 3 is invalid. */
88 /* Bits in EN0_ISR - Interrupt status register */
89 #define ENISR_RX 0x01 /* Receiver, no error */
90 #define ENISR_TX 0x02 /* Transmitter, no error */
91 #define ENISR_RX_ERR 0x04 /* Receiver, with error */
92 #define ENISR_TX_ERR 0x08 /* Transmitter, with error */
93 #define ENISR_OVER 0x10 /* Receiver overwrote the ring */
94 #define ENISR_COUNTERS 0x20 /* Counters need emptying */
95 #define ENISR_RDC 0x40 /* remote dma complete */
96 #define ENISR_RESET 0x80 /* Reset completed */
97 #define ENISR_ALL 0x3f /* Interrupts we will enable */
99 /* Bits in received packet status byte and EN0_RSR*/
100 #define ENRSR_RXOK 0x01 /* Received a good packet */
101 #define ENRSR_CRC 0x02 /* CRC error */
102 #define ENRSR_FAE 0x04 /* frame alignment error */
103 #define ENRSR_FO 0x08 /* FIFO overrun */
104 #define ENRSR_MPA 0x10 /* missed pkt */
105 #define ENRSR_PHY 0x20 /* physical/multicast address */
106 #define ENRSR_DIS 0x40 /* receiver disable. set in monitor mode */
107 #define ENRSR_DEF 0x80 /* deferring */
109 /* Transmitted packet status, EN0_TSR. */
110 #define ENTSR_PTX 0x01 /* Packet transmitted without error */
111 #define ENTSR_ND 0x02 /* The transmit wasn't deferred. */
112 #define ENTSR_COL 0x04 /* The transmit collided at least once. */
113 #define ENTSR_ABT 0x08 /* The transmit collided 16 times, and was deferred. */
114 #define ENTSR_CRS 0x10 /* The carrier sense was lost. */
115 #define ENTSR_FU 0x20 /* A "FIFO underrun" occurred during transmit. */
116 #define ENTSR_CDH 0x40 /* The collision detect "heartbeat" signal was lost. */
117 #define ENTSR_OWC 0x80 /* There was an out-of-window collision. */
119 #define NE2000_PMEM_SIZE (32*1024)
120 #define NE2000_PMEM_START (16*1024)
121 #define NE2000_PMEM_END (NE2000_PMEM_SIZE+NE2000_PMEM_START)
122 #define NE2000_MEM_SIZE NE2000_PMEM_END
124 typedef struct NE2000State
{
139 uint8_t phys
[6]; /* mac address */
141 uint8_t mult
[8]; /* multicast mask array */
147 uint8_t mem
[NE2000_MEM_SIZE
];
150 static void ne2000_reset(NE2000State
*s
)
154 s
->isr
= ENISR_RESET
;
155 memcpy(s
->mem
, s
->macaddr
, 6);
159 /* duplicate prom data */
160 for(i
= 15;i
>= 0; i
--) {
161 s
->mem
[2 * i
] = s
->mem
[i
];
162 s
->mem
[2 * i
+ 1] = s
->mem
[i
];
166 static void ne2000_update_irq(NE2000State
*s
)
169 isr
= (s
->isr
& s
->imr
) & 0x7f;
170 #if defined(DEBUG_NE2000)
171 printf("NE2000: Set IRQ to %d (%02x %02x)\n",
172 isr
? 1 : 0, s
->isr
, s
->imr
);
174 qemu_set_irq(s
->irq
, (isr
!= 0));
177 #define POLYNOMIAL 0x04c11db6
181 static int compute_mcast_idx(const uint8_t *ep
)
188 for (i
= 0; i
< 6; i
++) {
190 for (j
= 0; j
< 8; j
++) {
191 carry
= ((crc
& 0x80000000L
) ? 1 : 0) ^ (b
& 0x01);
195 crc
= ((crc
^ POLYNOMIAL
) | carry
);
201 static int ne2000_buffer_full(NE2000State
*s
)
203 int avail
, index
, boundary
;
205 index
= s
->curpag
<< 8;
206 boundary
= s
->boundary
<< 8;
207 if (index
< boundary
)
208 avail
= boundary
- index
;
210 avail
= (s
->stop
- s
->start
) - (index
- boundary
);
211 if (avail
< (MAX_ETH_FRAME_SIZE
+ 4))
216 static int ne2000_can_receive(void *opaque
)
218 NE2000State
*s
= opaque
;
220 if (s
->cmd
& E8390_STOP
)
222 return !ne2000_buffer_full(s
);
225 #define MIN_BUF_SIZE 60
227 static void ne2000_receive(void *opaque
, const uint8_t *buf
, int size
)
229 NE2000State
*s
= opaque
;
231 unsigned int total_len
, next
, avail
, len
, index
, mcast_idx
;
233 static const uint8_t broadcast_macaddr
[6] =
234 { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
236 #if defined(DEBUG_NE2000)
237 printf("NE2000: received len=%d\n", size
);
240 if (s
->cmd
& E8390_STOP
|| ne2000_buffer_full(s
))
243 /* XXX: check this */
244 if (s
->rxcr
& 0x10) {
245 /* promiscuous: receive all */
247 if (!memcmp(buf
, broadcast_macaddr
, 6)) {
248 /* broadcast address */
249 if (!(s
->rxcr
& 0x04))
251 } else if (buf
[0] & 0x01) {
253 if (!(s
->rxcr
& 0x08))
255 mcast_idx
= compute_mcast_idx(buf
);
256 if (!(s
->mult
[mcast_idx
>> 3] & (1 << (mcast_idx
& 7))))
258 } else if (s
->mem
[0] == buf
[0] &&
259 s
->mem
[2] == buf
[1] &&
260 s
->mem
[4] == buf
[2] &&
261 s
->mem
[6] == buf
[3] &&
262 s
->mem
[8] == buf
[4] &&
263 s
->mem
[10] == buf
[5]) {
271 /* if too small buffer, then expand it */
272 if (size
< MIN_BUF_SIZE
) {
273 memcpy(buf1
, buf
, size
);
274 memset(buf1
+ size
, 0, MIN_BUF_SIZE
- size
);
279 index
= s
->curpag
<< 8;
280 /* 4 bytes for header */
281 total_len
= size
+ 4;
282 /* address for next packet (4 bytes for CRC) */
283 next
= index
+ ((total_len
+ 4 + 255) & ~0xff);
285 next
-= (s
->stop
- s
->start
);
286 /* prepare packet header */
288 s
->rsr
= ENRSR_RXOK
; /* receive status */
289 /* XXX: check this */
295 p
[3] = total_len
>> 8;
298 /* write packet data */
300 if (index
<= s
->stop
)
301 avail
= s
->stop
- index
;
307 memcpy(s
->mem
+ index
, buf
, len
);
310 if (index
== s
->stop
)
314 s
->curpag
= next
>> 8;
316 /* now we can signal we have received something */
318 ne2000_update_irq(s
);
321 static void ne2000_ioport_write(void *opaque
, uint32_t addr
, uint32_t val
)
323 NE2000State
*s
= opaque
;
324 int offset
, page
, index
;
328 printf("NE2000: write addr=0x%x val=0x%02x\n", addr
, val
);
330 if (addr
== E8390_CMD
) {
331 /* control register */
333 if (!(val
& E8390_STOP
)) { /* START bit makes no sense on RTL8029... */
334 s
->isr
&= ~ENISR_RESET
;
335 /* test specific case: zero length transfer */
336 if ((val
& (E8390_RREAD
| E8390_RWRITE
)) &&
339 ne2000_update_irq(s
);
341 if (val
& E8390_TRANS
) {
342 index
= (s
->tpsr
<< 8);
343 /* XXX: next 2 lines are a hack to make netware 3.11 work */
344 if (index
>= NE2000_PMEM_END
)
345 index
-= NE2000_PMEM_SIZE
;
346 /* fail safe: check range on the transmitted length */
347 if (index
+ s
->tcnt
<= NE2000_PMEM_END
) {
348 qemu_send_packet(s
->vc
, s
->mem
+ index
, s
->tcnt
);
350 /* signal end of transfer */
353 s
->cmd
&= ~E8390_TRANS
;
354 ne2000_update_irq(s
);
359 offset
= addr
| (page
<< 4);
372 ne2000_update_irq(s
);
378 s
->tcnt
= (s
->tcnt
& 0xff00) | val
;
381 s
->tcnt
= (s
->tcnt
& 0x00ff) | (val
<< 8);
384 s
->rsar
= (s
->rsar
& 0xff00) | val
;
387 s
->rsar
= (s
->rsar
& 0x00ff) | (val
<< 8);
390 s
->rcnt
= (s
->rcnt
& 0xff00) | val
;
393 s
->rcnt
= (s
->rcnt
& 0x00ff) | (val
<< 8);
402 s
->isr
&= ~(val
& 0x7f);
403 ne2000_update_irq(s
);
405 case EN1_PHYS
... EN1_PHYS
+ 5:
406 s
->phys
[offset
- EN1_PHYS
] = val
;
411 case EN1_MULT
... EN1_MULT
+ 7:
412 s
->mult
[offset
- EN1_MULT
] = val
;
418 static uint32_t ne2000_ioport_read(void *opaque
, uint32_t addr
)
420 NE2000State
*s
= opaque
;
421 int offset
, page
, ret
;
424 if (addr
== E8390_CMD
) {
428 offset
= addr
| (page
<< 4);
440 ret
= s
->rsar
& 0x00ff;
445 case EN1_PHYS
... EN1_PHYS
+ 5:
446 ret
= s
->phys
[offset
- EN1_PHYS
];
451 case EN1_MULT
... EN1_MULT
+ 7:
452 ret
= s
->mult
[offset
- EN1_MULT
];
470 ret
= 0; /* 10baseT media */
473 ret
= 0x40; /* 10baseT active */
476 ret
= 0x40; /* Full duplex */
484 printf("NE2000: read addr=0x%x val=%02x\n", addr
, ret
);
489 static inline void ne2000_mem_writeb(NE2000State
*s
, uint32_t addr
,
493 (addr
>= NE2000_PMEM_START
&& addr
< NE2000_MEM_SIZE
)) {
498 static inline void ne2000_mem_writew(NE2000State
*s
, uint32_t addr
,
501 addr
&= ~1; /* XXX: check exact behaviour if not even */
503 (addr
>= NE2000_PMEM_START
&& addr
< NE2000_MEM_SIZE
)) {
504 *(uint16_t *)(s
->mem
+ addr
) = cpu_to_le16(val
);
508 static inline void ne2000_mem_writel(NE2000State
*s
, uint32_t addr
,
511 addr
&= ~1; /* XXX: check exact behaviour if not even */
513 (addr
>= NE2000_PMEM_START
&& addr
< NE2000_MEM_SIZE
)) {
514 cpu_to_le32wu((uint32_t *)(s
->mem
+ addr
), val
);
518 static inline uint32_t ne2000_mem_readb(NE2000State
*s
, uint32_t addr
)
521 (addr
>= NE2000_PMEM_START
&& addr
< NE2000_MEM_SIZE
)) {
528 static inline uint32_t ne2000_mem_readw(NE2000State
*s
, uint32_t addr
)
530 addr
&= ~1; /* XXX: check exact behaviour if not even */
532 (addr
>= NE2000_PMEM_START
&& addr
< NE2000_MEM_SIZE
)) {
533 return le16_to_cpu(*(uint16_t *)(s
->mem
+ addr
));
539 static inline uint32_t ne2000_mem_readl(NE2000State
*s
, uint32_t addr
)
541 addr
&= ~1; /* XXX: check exact behaviour if not even */
543 (addr
>= NE2000_PMEM_START
&& addr
< NE2000_MEM_SIZE
)) {
544 return le32_to_cpupu((uint32_t *)(s
->mem
+ addr
));
550 static inline void ne2000_dma_update(NE2000State
*s
, int len
)
554 /* XXX: check what to do if rsar > stop */
555 if (s
->rsar
== s
->stop
)
558 if (s
->rcnt
<= len
) {
560 /* signal end of transfer */
562 ne2000_update_irq(s
);
568 static void ne2000_asic_ioport_write(void *opaque
, uint32_t addr
, uint32_t val
)
570 NE2000State
*s
= opaque
;
573 printf("NE2000: asic write val=0x%04x\n", val
);
577 if (s
->dcfg
& 0x01) {
579 ne2000_mem_writew(s
, s
->rsar
, val
);
580 ne2000_dma_update(s
, 2);
583 ne2000_mem_writeb(s
, s
->rsar
, val
);
584 ne2000_dma_update(s
, 1);
588 static uint32_t ne2000_asic_ioport_read(void *opaque
, uint32_t addr
)
590 NE2000State
*s
= opaque
;
593 if (s
->dcfg
& 0x01) {
595 ret
= ne2000_mem_readw(s
, s
->rsar
);
596 ne2000_dma_update(s
, 2);
599 ret
= ne2000_mem_readb(s
, s
->rsar
);
600 ne2000_dma_update(s
, 1);
603 printf("NE2000: asic read val=0x%04x\n", ret
);
608 static void ne2000_asic_ioport_writel(void *opaque
, uint32_t addr
, uint32_t val
)
610 NE2000State
*s
= opaque
;
613 printf("NE2000: asic writel val=0x%04x\n", val
);
618 ne2000_mem_writel(s
, s
->rsar
, val
);
619 ne2000_dma_update(s
, 4);
622 static uint32_t ne2000_asic_ioport_readl(void *opaque
, uint32_t addr
)
624 NE2000State
*s
= opaque
;
628 ret
= ne2000_mem_readl(s
, s
->rsar
);
629 ne2000_dma_update(s
, 4);
631 printf("NE2000: asic readl val=0x%04x\n", ret
);
636 static void ne2000_reset_ioport_write(void *opaque
, uint32_t addr
, uint32_t val
)
638 /* nothing to do (end of reset pulse) */
641 static uint32_t ne2000_reset_ioport_read(void *opaque
, uint32_t addr
)
643 NE2000State
*s
= opaque
;
648 static void ne2000_save(QEMUFile
* f
,void* opaque
)
650 NE2000State
* s
=(NE2000State
*)opaque
;
654 pci_device_save(s
->pci_dev
, f
);
656 qemu_put_8s(f
, &s
->rxcr
);
658 qemu_put_8s(f
, &s
->cmd
);
659 qemu_put_be32s(f
, &s
->start
);
660 qemu_put_be32s(f
, &s
->stop
);
661 qemu_put_8s(f
, &s
->boundary
);
662 qemu_put_8s(f
, &s
->tsr
);
663 qemu_put_8s(f
, &s
->tpsr
);
664 qemu_put_be16s(f
, &s
->tcnt
);
665 qemu_put_be16s(f
, &s
->rcnt
);
666 qemu_put_be32s(f
, &s
->rsar
);
667 qemu_put_8s(f
, &s
->rsr
);
668 qemu_put_8s(f
, &s
->isr
);
669 qemu_put_8s(f
, &s
->dcfg
);
670 qemu_put_8s(f
, &s
->imr
);
671 qemu_put_buffer(f
, s
->phys
, 6);
672 qemu_put_8s(f
, &s
->curpag
);
673 qemu_put_buffer(f
, s
->mult
, 8);
675 qemu_put_be32s(f
, &tmp
); /* ignored, was irq */
676 qemu_put_buffer(f
, s
->mem
, NE2000_MEM_SIZE
);
679 static int ne2000_load(QEMUFile
* f
,void* opaque
,int version_id
)
681 NE2000State
* s
=(NE2000State
*)opaque
;
688 if (s
->pci_dev
&& version_id
>= 3) {
689 ret
= pci_device_load(s
->pci_dev
, f
);
694 if (version_id
>= 2) {
695 qemu_get_8s(f
, &s
->rxcr
);
700 qemu_get_8s(f
, &s
->cmd
);
701 qemu_get_be32s(f
, &s
->start
);
702 qemu_get_be32s(f
, &s
->stop
);
703 qemu_get_8s(f
, &s
->boundary
);
704 qemu_get_8s(f
, &s
->tsr
);
705 qemu_get_8s(f
, &s
->tpsr
);
706 qemu_get_be16s(f
, &s
->tcnt
);
707 qemu_get_be16s(f
, &s
->rcnt
);
708 qemu_get_be32s(f
, &s
->rsar
);
709 qemu_get_8s(f
, &s
->rsr
);
710 qemu_get_8s(f
, &s
->isr
);
711 qemu_get_8s(f
, &s
->dcfg
);
712 qemu_get_8s(f
, &s
->imr
);
713 qemu_get_buffer(f
, s
->phys
, 6);
714 qemu_get_8s(f
, &s
->curpag
);
715 qemu_get_buffer(f
, s
->mult
, 8);
716 qemu_get_be32s(f
, &tmp
); /* ignored */
717 qemu_get_buffer(f
, s
->mem
, NE2000_MEM_SIZE
);
722 static void isa_ne2000_cleanup(VLANClientState
*vc
)
724 NE2000State
*s
= vc
->opaque
;
726 unregister_savevm("ne2000", s
);
728 isa_unassign_ioport(s
->isa_io_base
, 16);
729 isa_unassign_ioport(s
->isa_io_base
+ 0x10, 2);
730 isa_unassign_ioport(s
->isa_io_base
+ 0x1f, 1);
735 void isa_ne2000_init(int base
, qemu_irq irq
, NICInfo
*nd
)
739 qemu_check_nic_model(nd
, "ne2k_isa");
741 s
= qemu_mallocz(sizeof(NE2000State
));
743 register_ioport_write(base
, 16, 1, ne2000_ioport_write
, s
);
744 register_ioport_read(base
, 16, 1, ne2000_ioport_read
, s
);
746 register_ioport_write(base
+ 0x10, 1, 1, ne2000_asic_ioport_write
, s
);
747 register_ioport_read(base
+ 0x10, 1, 1, ne2000_asic_ioport_read
, s
);
748 register_ioport_write(base
+ 0x10, 2, 2, ne2000_asic_ioport_write
, s
);
749 register_ioport_read(base
+ 0x10, 2, 2, ne2000_asic_ioport_read
, s
);
751 register_ioport_write(base
+ 0x1f, 1, 1, ne2000_reset_ioport_write
, s
);
752 register_ioport_read(base
+ 0x1f, 1, 1, ne2000_reset_ioport_read
, s
);
753 s
->isa_io_base
= base
;
755 memcpy(s
->macaddr
, nd
->macaddr
, 6);
759 s
->vc
= qemu_new_vlan_client(nd
->vlan
, nd
->model
, nd
->name
,
760 ne2000_receive
, ne2000_can_receive
,
761 isa_ne2000_cleanup
, s
);
763 qemu_format_nic_info_str(s
->vc
, s
->macaddr
);
765 register_savevm("ne2000", -1, 2, ne2000_save
, ne2000_load
, s
);
768 /***********************************************************/
769 /* PCI NE2000 definitions */
771 typedef struct PCINE2000State
{
776 static void ne2000_map(PCIDevice
*pci_dev
, int region_num
,
777 uint32_t addr
, uint32_t size
, int type
)
779 PCINE2000State
*d
= (PCINE2000State
*)pci_dev
;
780 NE2000State
*s
= &d
->ne2000
;
782 register_ioport_write(addr
, 16, 1, ne2000_ioport_write
, s
);
783 register_ioport_read(addr
, 16, 1, ne2000_ioport_read
, s
);
785 register_ioport_write(addr
+ 0x10, 1, 1, ne2000_asic_ioport_write
, s
);
786 register_ioport_read(addr
+ 0x10, 1, 1, ne2000_asic_ioport_read
, s
);
787 register_ioport_write(addr
+ 0x10, 2, 2, ne2000_asic_ioport_write
, s
);
788 register_ioport_read(addr
+ 0x10, 2, 2, ne2000_asic_ioport_read
, s
);
789 register_ioport_write(addr
+ 0x10, 4, 4, ne2000_asic_ioport_writel
, s
);
790 register_ioport_read(addr
+ 0x10, 4, 4, ne2000_asic_ioport_readl
, s
);
792 register_ioport_write(addr
+ 0x1f, 1, 1, ne2000_reset_ioport_write
, s
);
793 register_ioport_read(addr
+ 0x1f, 1, 1, ne2000_reset_ioport_read
, s
);
796 static void ne2000_cleanup(VLANClientState
*vc
)
798 NE2000State
*s
= vc
->opaque
;
800 unregister_savevm("ne2000", s
);
803 PCIDevice
*pci_ne2000_init(PCIBus
*bus
, NICInfo
*nd
, int devfn
)
809 d
= (PCINE2000State
*)pci_register_device(bus
,
810 "NE2000", sizeof(PCINE2000State
),
816 pci_conf
= d
->dev
.config
;
817 pci_config_set_vendor_id(pci_conf
, PCI_VENDOR_ID_REALTEK
);
818 pci_config_set_device_id(pci_conf
, PCI_DEVICE_ID_REALTEK_RTL8029
);
819 pci_config_set_class(pci_conf
, PCI_CLASS_NETWORK_ETHERNET
);
820 pci_conf
[0x0e] = 0x00; // header_type
821 pci_conf
[0x3d] = 1; // interrupt pin 0
823 pci_register_io_region(&d
->dev
, 0, 0x100,
824 PCI_ADDRESS_SPACE_IO
, ne2000_map
);
826 s
->irq
= d
->dev
.irq
[0];
827 s
->pci_dev
= (PCIDevice
*)d
;
828 memcpy(s
->macaddr
, nd
->macaddr
, 6);
830 s
->vc
= qemu_new_vlan_client(nd
->vlan
, nd
->model
, nd
->name
,
831 ne2000_receive
, ne2000_can_receive
,
834 qemu_format_nic_info_str(s
->vc
, s
->macaddr
);
836 register_savevm("ne2000", -1, 3, ne2000_save
, ne2000_load
, s
);
838 return (PCIDevice
*)d
;