hw/arm_gic.c

   1 /*
   2  * ARM Generic/Distributed Interrupt Controller
   3  *
   4  * Copyright (c) 2006-2007 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licenced under the GPL.
   8  */
   9
  10 /* This file contains implementation code for the RealView EB interrupt
  11    controller, MPCore distributed interrupt controller and ARMv7-M
  12    Nested Vectored Interrupt Controller.  */
  13
  14 //#define DEBUG_GIC
  15
  16 #ifdef DEBUG_GIC
  17 #define DPRINTF(fmt, ...) \
  18 do { printf("arm_gic: " fmt , ## __VA_ARGS__); } while (0)
  19 #else
  20 #define DPRINTF(fmt, ...) do {} while(0)
  21 #endif
  22
  23 #ifdef NVIC
  24 static const uint8_t gic_id[] =
  25 { 0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1 };
  26 /* The NVIC has 16 internal vectors.  However these are not exposed
  27    through the normal GIC interface.  */
  28 #define GIC_BASE_IRQ    32
  29 #else
  30 static const uint8_t gic_id[] =
  31 { 0x90, 0x13, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
  32 #define GIC_BASE_IRQ    0
  33 #endif
  34
  35 #define FROM_SYSBUSGIC(type, dev) \
  36     DO_UPCAST(type, gic, FROM_SYSBUS(gic_state, dev))
  37
  38 typedef struct gic_irq_state
  39 {
  40     /* ??? The documentation seems to imply the enable bits are global, even
  41        for per-cpu interrupts.  This seems strange.  */
  42     unsigned enabled:1;
  43     unsigned pending:NCPU;
  44     unsigned active:NCPU;
  45     unsigned level:NCPU;
  46     unsigned model:1; /* 0 = N:N, 1 = 1:N */
  47     unsigned trigger:1; /* nonzero = edge triggered.  */
  48 } gic_irq_state;
  49
  50 #define ALL_CPU_MASK ((1 << NCPU) - 1)
  51
  52 #define GIC_SET_ENABLED(irq) s->irq_state[irq].enabled = 1
  53 #define GIC_CLEAR_ENABLED(irq) s->irq_state[irq].enabled = 0
  54 #define GIC_TEST_ENABLED(irq) s->irq_state[irq].enabled
  55 #define GIC_SET_PENDING(irq, cm) s->irq_state[irq].pending |= (cm)
  56 #define GIC_CLEAR_PENDING(irq, cm) s->irq_state[irq].pending &= ~(cm)
  57 #define GIC_TEST_PENDING(irq, cm) ((s->irq_state[irq].pending & (cm)) != 0)
  58 #define GIC_SET_ACTIVE(irq, cm) s->irq_state[irq].active |= (cm)
  59 #define GIC_CLEAR_ACTIVE(irq, cm) s->irq_state[irq].active &= ~(cm)
  60 #define GIC_TEST_ACTIVE(irq, cm) ((s->irq_state[irq].active & (cm)) != 0)
  61 #define GIC_SET_MODEL(irq) s->irq_state[irq].model = 1
  62 #define GIC_CLEAR_MODEL(irq) s->irq_state[irq].model = 0
  63 #define GIC_TEST_MODEL(irq) s->irq_state[irq].model
  64 #define GIC_SET_LEVEL(irq, cm) s->irq_state[irq].level = (cm)
  65 #define GIC_CLEAR_LEVEL(irq, cm) s->irq_state[irq].level &= ~(cm)
  66 #define GIC_TEST_LEVEL(irq, cm) ((s->irq_state[irq].level & (cm)) != 0)
  67 #define GIC_SET_TRIGGER(irq) s->irq_state[irq].trigger = 1
  68 #define GIC_CLEAR_TRIGGER(irq) s->irq_state[irq].trigger = 0
  69 #define GIC_TEST_TRIGGER(irq) s->irq_state[irq].trigger
  70 #define GIC_GET_PRIORITY(irq, cpu) \
  71   (((irq) < 32) ? s->priority1[irq][cpu] : s->priority2[(irq) - 32])
  72 #ifdef NVIC
  73 #define GIC_TARGET(irq) 1
  74 #else
  75 #define GIC_TARGET(irq) s->irq_target[irq]
  76 #endif
  77
  78 typedef struct gic_state
  79 {
  80     SysBusDevice busdev;
  81     qemu_irq parent_irq[NCPU];
  82     int enabled;
  83     int cpu_enabled[NCPU];
  84
  85     gic_irq_state irq_state[GIC_NIRQ];
  86 #ifndef NVIC
  87     int irq_target[GIC_NIRQ];
  88 #endif
  89     int priority1[32][NCPU];
  90     int priority2[GIC_NIRQ - 32];
  91     int last_active[GIC_NIRQ][NCPU];
  92
  93     int priority_mask[NCPU];
  94     int running_irq[NCPU];
  95     int running_priority[NCPU];
  96     int current_pending[NCPU];
  97
  98     int iomemtype;
  99 } gic_state;
 100
 101 /* TODO: Many places that call this routine could be optimized.  */
 102 /* Update interrupt status after enabled or pending bits have been changed.  */
 103 static void gic_update(gic_state *s)
 104 {
 105     int best_irq;
 106     int best_prio;
 107     int irq;
 108     int level;
 109     int cpu;
 110     int cm;
 111
 112     for (cpu = 0; cpu < NCPU; cpu++) {
 113         cm = 1 << cpu;
 114         s->current_pending[cpu] = 1023;
 115         if (!s->enabled || !s->cpu_enabled[cpu]) {
 116             qemu_irq_lower(s->parent_irq[cpu]);
 117             return;
 118         }
 119         best_prio = 0x100;
 120         best_irq = 1023;
 121         for (irq = 0; irq < GIC_NIRQ; irq++) {
 122             if (GIC_TEST_ENABLED(irq) && GIC_TEST_PENDING(irq, cm)) {
 123                 if (GIC_GET_PRIORITY(irq, cpu) < best_prio) {
 124                     best_prio = GIC_GET_PRIORITY(irq, cpu);
 125                     best_irq = irq;
 126                 }
 127             }
 128         }
 129         level = 0;
 130         if (best_prio <= s->priority_mask[cpu]) {
 131             s->current_pending[cpu] = best_irq;
 132             if (best_prio < s->running_priority[cpu]) {
 133                 DPRINTF("Raised pending IRQ %d\n", best_irq);
 134                 level = 1;
 135             }
 136         }
 137         qemu_set_irq(s->parent_irq[cpu], level);
 138     }
 139 }
 140
 141 static void __attribute__((unused))
 142 gic_set_pending_private(gic_state *s, int cpu, int irq)
 143 {
 144     int cm = 1 << cpu;
 145
 146     if (GIC_TEST_PENDING(irq, cm))
 147         return;
 148
 149     DPRINTF("Set %d pending cpu %d\n", irq, cpu);
 150     GIC_SET_PENDING(irq, cm);
 151     gic_update(s);
 152 }
 153
 154 /* Process a change in an external IRQ input.  */
 155 static void gic_set_irq(void *opaque, int irq, int level)
 156 {
 157     gic_state *s = (gic_state *)opaque;
 158     /* The first external input line is internal interrupt 32.  */
 159     irq += 32;
 160     if (level == GIC_TEST_LEVEL(irq, ALL_CPU_MASK))
 161         return;
 162
 163     if (level) {
 164         GIC_SET_LEVEL(irq, ALL_CPU_MASK);
 165         if (GIC_TEST_TRIGGER(irq) || GIC_TEST_ENABLED(irq)) {
 166             DPRINTF("Set %d pending mask %x\n", irq, GIC_TARGET(irq));
 167             GIC_SET_PENDING(irq, GIC_TARGET(irq));
 168         }
 169     } else {
 170         GIC_CLEAR_LEVEL(irq, ALL_CPU_MASK);
 171     }
 172     gic_update(s);
 173 }
 174
 175 static void gic_set_running_irq(gic_state *s, int cpu, int irq)
 176 {
 177     s->running_irq[cpu] = irq;
 178     if (irq == 1023) {
 179         s->running_priority[cpu] = 0x100;
 180     } else {
 181         s->running_priority[cpu] = GIC_GET_PRIORITY(irq, cpu);
 182     }
 183     gic_update(s);
 184 }
 185
 186 static uint32_t gic_acknowledge_irq(gic_state *s, int cpu)
 187 {
 188     int new_irq;
 189     int cm = 1 << cpu;
 190     new_irq = s->current_pending[cpu];
 191     if (new_irq == 1023
 192             || GIC_GET_PRIORITY(new_irq, cpu) >= s->running_priority[cpu]) {
 193         DPRINTF("ACK no pending IRQ\n");
 194         return 1023;
 195     }
 196     s->last_active[new_irq][cpu] = s->running_irq[cpu];
 197     /* Clear pending flags for both level and edge triggered interrupts.
 198        Level triggered IRQs will be reasserted once they become inactive.  */
 199     GIC_CLEAR_PENDING(new_irq, GIC_TEST_MODEL(new_irq) ? ALL_CPU_MASK : cm);
 200     gic_set_running_irq(s, cpu, new_irq);
 201     DPRINTF("ACK %d\n", new_irq);
 202     return new_irq;
 203 }
 204
 205 static void gic_complete_irq(gic_state * s, int cpu, int irq)
 206 {
 207     int update = 0;
 208     int cm = 1 << cpu;
 209     DPRINTF("EOI %d\n", irq);
 210     if (s->running_irq[cpu] == 1023)
 211         return; /* No active IRQ.  */
 212     if (irq != 1023) {
 213         /* Mark level triggered interrupts as pending if they are still
 214            raised.  */
 215         if (!GIC_TEST_TRIGGER(irq) && GIC_TEST_ENABLED(irq)
 216                 && GIC_TEST_LEVEL(irq, cm) && (GIC_TARGET(irq) & cm) != 0) {
 217             DPRINTF("Set %d pending mask %x\n", irq, cm);
 218             GIC_SET_PENDING(irq, cm);
 219             update = 1;
 220         }
 221     }
 222     if (irq != s->running_irq[cpu]) {
 223         /* Complete an IRQ that is not currently running.  */
 224         int tmp = s->running_irq[cpu];
 225         while (s->last_active[tmp][cpu] != 1023) {
 226             if (s->last_active[tmp][cpu] == irq) {
 227                 s->last_active[tmp][cpu] = s->last_active[irq][cpu];
 228                 break;
 229             }
 230             tmp = s->last_active[tmp][cpu];
 231         }
 232         if (update) {
 233             gic_update(s);
 234         }
 235     } else {
 236         /* Complete the current running IRQ.  */
 237         gic_set_running_irq(s, cpu, s->last_active[s->running_irq[cpu]][cpu]);
 238     }
 239 }
 240
 241 static uint32_t gic_dist_readb(void *opaque, target_phys_addr_t offset)
 242 {
 243     gic_state *s = (gic_state *)opaque;
 244     uint32_t res;
 245     int irq;
 246     int i;
 247     int cpu;
 248     int cm;
 249     int mask;
 250
 251     cpu = gic_get_current_cpu();
 252     cm = 1 << cpu;
 253     if (offset < 0x100) {
 254 #ifndef NVIC
 255         if (offset == 0)
 256             return s->enabled;
 257         if (offset == 4)
 258             return ((GIC_NIRQ / 32) - 1) | ((NCPU - 1) << 5);
 259         if (offset < 0x08)
 260             return 0;
 261 #endif
 262         goto bad_reg;
 263     } else if (offset < 0x200) {
 264         /* Interrupt Set/Clear Enable.  */
 265         if (offset < 0x180)
 266             irq = (offset - 0x100) * 8;
 267         else
 268             irq = (offset - 0x180) * 8;
 269         irq += GIC_BASE_IRQ;
 270         if (irq >= GIC_NIRQ)
 271             goto bad_reg;
 272         res = 0;
 273         for (i = 0; i < 8; i++) {
 274             if (GIC_TEST_ENABLED(irq + i)) {
 275                 res |= (1 << i);
 276             }
 277         }
 278     } else if (offset < 0x300) {
 279         /* Interrupt Set/Clear Pending.  */
 280         if (offset < 0x280)
 281             irq = (offset - 0x200) * 8;
 282         else
 283             irq = (offset - 0x280) * 8;
 284         irq += GIC_BASE_IRQ;
 285         if (irq >= GIC_NIRQ)
 286             goto bad_reg;
 287         res = 0;
 288         mask = (irq < 32) ?  cm : ALL_CPU_MASK;
 289         for (i = 0; i < 8; i++) {
 290             if (GIC_TEST_PENDING(irq + i, mask)) {
 291                 res |= (1 << i);
 292             }
 293         }
 294     } else if (offset < 0x400) {
 295         /* Interrupt Active.  */
 296         irq = (offset - 0x300) * 8 + GIC_BASE_IRQ;
 297         if (irq >= GIC_NIRQ)
 298             goto bad_reg;
 299         res = 0;
 300         mask = (irq < 32) ?  cm : ALL_CPU_MASK;
 301         for (i = 0; i < 8; i++) {
 302             if (GIC_TEST_ACTIVE(irq + i, mask)) {
 303                 res |= (1 << i);
 304             }
 305         }
 306     } else if (offset < 0x800) {
 307         /* Interrupt Priority.  */
 308         irq = (offset - 0x400) + GIC_BASE_IRQ;
 309         if (irq >= GIC_NIRQ)
 310             goto bad_reg;
 311         res = GIC_GET_PRIORITY(irq, cpu);
 312 #ifndef NVIC
 313     } else if (offset < 0xc00) {
 314         /* Interrupt CPU Target.  */
 315         irq = (offset - 0x800) + GIC_BASE_IRQ;
 316         if (irq >= GIC_NIRQ)
 317             goto bad_reg;
 318         if (irq >= 29 && irq <= 31) {
 319             res = cm;
 320         } else {
 321             res = GIC_TARGET(irq);
 322         }
 323     } else if (offset < 0xf00) {
 324         /* Interrupt Configuration.  */
 325         irq = (offset - 0xc00) * 2 + GIC_BASE_IRQ;
 326         if (irq >= GIC_NIRQ)
 327             goto bad_reg;
 328         res = 0;
 329         for (i = 0; i < 4; i++) {
 330             if (GIC_TEST_MODEL(irq + i))
 331                 res |= (1 << (i * 2));
 332             if (GIC_TEST_TRIGGER(irq + i))
 333                 res |= (2 << (i * 2));
 334         }
 335 #endif
 336     } else if (offset < 0xfe0) {
 337         goto bad_reg;
 338     } else /* offset >= 0xfe0 */ {
 339         if (offset & 3) {
 340             res = 0;
 341         } else {
 342             res = gic_id[(offset - 0xfe0) >> 2];
 343         }
 344     }
 345     return res;
 346 bad_reg:
 347     hw_error("gic_dist_readb: Bad offset %x\n", (int)offset);
 348     return 0;
 349 }
 350
 351 static uint32_t gic_dist_readw(void *opaque, target_phys_addr_t offset)
 352 {
 353     uint32_t val;
 354     val = gic_dist_readb(opaque, offset);
 355     val |= gic_dist_readb(opaque, offset + 1) << 8;
 356     return val;
 357 }
 358
 359 static uint32_t gic_dist_readl(void *opaque, target_phys_addr_t offset)
 360 {
 361     uint32_t val;
 362 #ifdef NVIC
 363     gic_state *s = (gic_state *)opaque;
 364     uint32_t addr;
 365     addr = offset;
 366     if (addr < 0x100 || addr > 0xd00)
 367         return nvic_readl(s, addr);
 368 #endif
 369     val = gic_dist_readw(opaque, offset);
 370     val |= gic_dist_readw(opaque, offset + 2) << 16;
 371     return val;
 372 }
 373
 374 static void gic_dist_writeb(void *opaque, target_phys_addr_t offset,
 375                             uint32_t value)
 376 {
 377     gic_state *s = (gic_state *)opaque;
 378     int irq;
 379     int i;
 380     int cpu;
 381
 382     cpu = gic_get_current_cpu();
 383     if (offset < 0x100) {
 384 #ifdef NVIC
 385         goto bad_reg;
 386 #else
 387         if (offset == 0) {
 388             s->enabled = (value & 1);
 389             DPRINTF("Distribution %sabled\n", s->enabled ? "En" : "Dis");
 390         } else if (offset < 4) {
 391             /* ignored.  */
 392         } else {
 393             goto bad_reg;
 394         }
 395 #endif
 396     } else if (offset < 0x180) {
 397         /* Interrupt Set Enable.  */
 398         irq = (offset - 0x100) * 8 + GIC_BASE_IRQ;
 399         if (irq >= GIC_NIRQ)
 400             goto bad_reg;
 401         if (irq < 16)
 402           value = 0xff;
 403         for (i = 0; i < 8; i++) {
 404             if (value & (1 << i)) {
 405                 int mask = (irq < 32) ? (1 << cpu) : GIC_TARGET(irq);
 406                 if (!GIC_TEST_ENABLED(irq + i))
 407                     DPRINTF("Enabled IRQ %d\n", irq + i);
 408                 GIC_SET_ENABLED(irq + i);
 409                 /* If a raised level triggered IRQ enabled then mark
 410                    is as pending.  */
 411                 if (GIC_TEST_LEVEL(irq + i, mask)
 412                         && !GIC_TEST_TRIGGER(irq + i)) {
 413                     DPRINTF("Set %d pending mask %x\n", irq + i, mask);
 414                     GIC_SET_PENDING(irq + i, mask);
 415                 }
 416             }
 417         }
 418     } else if (offset < 0x200) {
 419         /* Interrupt Clear Enable.  */
 420         irq = (offset - 0x180) * 8 + GIC_BASE_IRQ;
 421         if (irq >= GIC_NIRQ)
 422             goto bad_reg;
 423         if (irq < 16)
 424           value = 0;
 425         for (i = 0; i < 8; i++) {
 426             if (value & (1 << i)) {
 427                 if (GIC_TEST_ENABLED(irq + i))
 428                     DPRINTF("Disabled IRQ %d\n", irq + i);
 429                 GIC_CLEAR_ENABLED(irq + i);
 430             }
 431         }
 432     } else if (offset < 0x280) {
 433         /* Interrupt Set Pending.  */
 434         irq = (offset - 0x200) * 8 + GIC_BASE_IRQ;
 435         if (irq >= GIC_NIRQ)
 436             goto bad_reg;
 437         if (irq < 16)
 438           irq = 0;
 439
 440         for (i = 0; i < 8; i++) {
 441             if (value & (1 << i)) {
 442                 GIC_SET_PENDING(irq + i, GIC_TARGET(irq));
 443             }
 444         }
 445     } else if (offset < 0x300) {
 446         /* Interrupt Clear Pending.  */
 447         irq = (offset - 0x280) * 8 + GIC_BASE_IRQ;
 448         if (irq >= GIC_NIRQ)
 449             goto bad_reg;
 450         for (i = 0; i < 8; i++) {
 451             /* ??? This currently clears the pending bit for all CPUs, even
 452                for per-CPU interrupts.  It's unclear whether this is the
 453                corect behavior.  */
 454             if (value & (1 << i)) {
 455                 GIC_CLEAR_PENDING(irq + i, ALL_CPU_MASK);
 456             }
 457         }
 458     } else if (offset < 0x400) {
 459         /* Interrupt Active.  */
 460         goto bad_reg;
 461     } else if (offset < 0x800) {
 462         /* Interrupt Priority.  */
 463         irq = (offset - 0x400) + GIC_BASE_IRQ;
 464         if (irq >= GIC_NIRQ)
 465             goto bad_reg;
 466         if (irq < 32) {
 467             s->priority1[irq][cpu] = value;
 468         } else {
 469             s->priority2[irq - 32] = value;
 470         }
 471 #ifndef NVIC
 472     } else if (offset < 0xc00) {
 473         /* Interrupt CPU Target.  */
 474         irq = (offset - 0x800) + GIC_BASE_IRQ;
 475         if (irq >= GIC_NIRQ)
 476             goto bad_reg;
 477         if (irq < 29)
 478             value = 0;
 479         else if (irq < 32)
 480             value = ALL_CPU_MASK;
 481         s->irq_target[irq] = value & ALL_CPU_MASK;
 482     } else if (offset < 0xf00) {
 483         /* Interrupt Configuration.  */
 484         irq = (offset - 0xc00) * 4 + GIC_BASE_IRQ;
 485         if (irq >= GIC_NIRQ)
 486             goto bad_reg;
 487         if (irq < 32)
 488             value |= 0xaa;
 489         for (i = 0; i < 4; i++) {
 490             if (value & (1 << (i * 2))) {
 491                 GIC_SET_MODEL(irq + i);
 492             } else {
 493                 GIC_CLEAR_MODEL(irq + i);
 494             }
 495             if (value & (2 << (i * 2))) {
 496                 GIC_SET_TRIGGER(irq + i);
 497             } else {
 498                 GIC_CLEAR_TRIGGER(irq + i);
 499             }
 500         }
 501 #endif
 502     } else {
 503         /* 0xf00 is only handled for 32-bit writes.  */
 504         goto bad_reg;
 505     }
 506     gic_update(s);
 507     return;
 508 bad_reg:
 509     hw_error("gic_dist_writeb: Bad offset %x\n", (int)offset);
 510 }
 511
 512 static void gic_dist_writew(void *opaque, target_phys_addr_t offset,
 513                             uint32_t value)
 514 {
 515     gic_dist_writeb(opaque, offset, value & 0xff);
 516     gic_dist_writeb(opaque, offset + 1, value >> 8);
 517 }
 518
 519 static void gic_dist_writel(void *opaque, target_phys_addr_t offset,
 520                             uint32_t value)
 521 {
 522     gic_state *s = (gic_state *)opaque;
 523 #ifdef NVIC
 524     uint32_t addr;
 525     addr = offset;
 526     if (addr < 0x100 || (addr > 0xd00 && addr != 0xf00)) {
 527         nvic_writel(s, addr, value);
 528         return;
 529     }
 530 #endif
 531     if (offset == 0xf00) {
 532         int cpu;
 533         int irq;
 534         int mask;
 535
 536         cpu = gic_get_current_cpu();
 537         irq = value & 0x3ff;
 538         switch ((value >> 24) & 3) {
 539         case 0:
 540             mask = (value >> 16) & ALL_CPU_MASK;
 541             break;
 542         case 1:
 543             mask = 1 << cpu;
 544             break;
 545         case 2:
 546             mask = ALL_CPU_MASK ^ (1 << cpu);
 547             break;
 548         default:
 549             DPRINTF("Bad Soft Int target filter\n");
 550             mask = ALL_CPU_MASK;
 551             break;
 552         }
 553         GIC_SET_PENDING(irq, mask);
 554         gic_update(s);
 555         return;
 556     }
 557     gic_dist_writew(opaque, offset, value & 0xffff);
 558     gic_dist_writew(opaque, offset + 2, value >> 16);
 559 }
 560
 561 static CPUReadMemoryFunc *gic_dist_readfn[] = {
 562    gic_dist_readb,
 563    gic_dist_readw,
 564    gic_dist_readl
 565 };
 566
 567 static CPUWriteMemoryFunc *gic_dist_writefn[] = {
 568    gic_dist_writeb,
 569    gic_dist_writew,
 570    gic_dist_writel
 571 };
 572
 573 #ifndef NVIC
 574 static uint32_t gic_cpu_read(gic_state *s, int cpu, int offset)
 575 {
 576     switch (offset) {
 577     case 0x00: /* Control */
 578         return s->cpu_enabled[cpu];
 579     case 0x04: /* Priority mask */
 580         return s->priority_mask[cpu];
 581     case 0x08: /* Binary Point */
 582         /* ??? Not implemented.  */
 583         return 0;
 584     case 0x0c: /* Acknowledge */
 585         return gic_acknowledge_irq(s, cpu);
 586     case 0x14: /* Runing Priority */
 587         return s->running_priority[cpu];
 588     case 0x18: /* Highest Pending Interrupt */
 589         return s->current_pending[cpu];
 590     default:
 591         hw_error("gic_cpu_read: Bad offset %x\n", (int)offset);
 592         return 0;
 593     }
 594 }
 595
 596 static void gic_cpu_write(gic_state *s, int cpu, int offset, uint32_t value)
 597 {
 598     switch (offset) {
 599     case 0x00: /* Control */
 600         s->cpu_enabled[cpu] = (value & 1);
 601         DPRINTF("CPU %sabled\n", s->cpu_enabled ? "En" : "Dis");
 602         break;
 603     case 0x04: /* Priority mask */
 604         s->priority_mask[cpu] = (value & 0xff);
 605         break;
 606     case 0x08: /* Binary Point */
 607         /* ??? Not implemented.  */
 608         break;
 609     case 0x10: /* End Of Interrupt */
 610         return gic_complete_irq(s, cpu, value & 0x3ff);
 611     default:
 612         hw_error("gic_cpu_write: Bad offset %x\n", (int)offset);
 613         return;
 614     }
 615     gic_update(s);
 616 }
 617 #endif
 618
 619 static void gic_reset(gic_state *s)
 620 {
 621     int i;
 622     memset(s->irq_state, 0, GIC_NIRQ * sizeof(gic_irq_state));
 623     for (i = 0 ; i < NCPU; i++) {
 624         s->priority_mask[i] = 0xf0;
 625         s->current_pending[i] = 1023;
 626         s->running_irq[i] = 1023;
 627         s->running_priority[i] = 0x100;
 628 #ifdef NVIC
 629         /* The NVIC doesn't have per-cpu interfaces, so enable by default.  */
 630         s->cpu_enabled[i] = 1;
 631 #else
 632         s->cpu_enabled[i] = 0;
 633 #endif
 634     }
 635     for (i = 0; i < 16; i++) {
 636         GIC_SET_ENABLED(i);
 637         GIC_SET_TRIGGER(i);
 638     }
 639 #ifdef NVIC
 640     /* The NVIC is always enabled.  */
 641     s->enabled = 1;
 642 #else
 643     s->enabled = 0;
 644 #endif
 645 }
 646
 647 static void gic_save(QEMUFile *f, void *opaque)
 648 {
 649     gic_state *s = (gic_state *)opaque;
 650     int i;
 651     int j;
 652
 653     qemu_put_be32(f, s->enabled);
 654     for (i = 0; i < NCPU; i++) {
 655         qemu_put_be32(f, s->cpu_enabled[i]);
 656 #ifndef NVIC
 657         qemu_put_be32(f, s->irq_target[i]);
 658 #endif
 659         for (j = 0; j < 32; j++)
 660             qemu_put_be32(f, s->priority1[j][i]);
 661         for (j = 0; j < GIC_NIRQ; j++)
 662             qemu_put_be32(f, s->last_active[j][i]);
 663         qemu_put_be32(f, s->priority_mask[i]);
 664         qemu_put_be32(f, s->running_irq[i]);
 665         qemu_put_be32(f, s->running_priority[i]);
 666         qemu_put_be32(f, s->current_pending[i]);
 667     }
 668     for (i = 0; i < GIC_NIRQ - 32; i++) {
 669         qemu_put_be32(f, s->priority2[i]);
 670     }
 671     for (i = 0; i < GIC_NIRQ; i++) {
 672         qemu_put_byte(f, s->irq_state[i].enabled);
 673         qemu_put_byte(f, s->irq_state[i].pending);
 674         qemu_put_byte(f, s->irq_state[i].active);
 675         qemu_put_byte(f, s->irq_state[i].level);
 676         qemu_put_byte(f, s->irq_state[i].model);
 677         qemu_put_byte(f, s->irq_state[i].trigger);
 678     }
 679 }
 680
 681 static int gic_load(QEMUFile *f, void *opaque, int version_id)
 682 {
 683     gic_state *s = (gic_state *)opaque;
 684     int i;
 685     int j;
 686
 687     if (version_id != 1)
 688         return -EINVAL;
 689
 690     s->enabled = qemu_get_be32(f);
 691     for (i = 0; i < NCPU; i++) {
 692         s->cpu_enabled[i] = qemu_get_be32(f);
 693 #ifndef NVIC
 694         s->irq_target[i] = qemu_get_be32(f);
 695 #endif
 696         for (j = 0; j < 32; j++)
 697             s->priority1[j][i] = qemu_get_be32(f);
 698         for (j = 0; j < GIC_NIRQ; j++)
 699             s->last_active[j][i] = qemu_get_be32(f);
 700         s->priority_mask[i] = qemu_get_be32(f);
 701         s->running_irq[i] = qemu_get_be32(f);
 702         s->running_priority[i] = qemu_get_be32(f);
 703         s->current_pending[i] = qemu_get_be32(f);
 704     }
 705     for (i = 0; i < GIC_NIRQ - 32; i++) {
 706         s->priority2[i] = qemu_get_be32(f);
 707     }
 708     for (i = 0; i < GIC_NIRQ; i++) {
 709         s->irq_state[i].enabled = qemu_get_byte(f);
 710         s->irq_state[i].pending = qemu_get_byte(f);
 711         s->irq_state[i].active = qemu_get_byte(f);
 712         s->irq_state[i].level = qemu_get_byte(f);
 713         s->irq_state[i].model = qemu_get_byte(f);
 714         s->irq_state[i].trigger = qemu_get_byte(f);
 715     }
 716
 717     return 0;
 718 }
 719
 720 static void gic_init(gic_state *s)
 721 {
 722     int i;
 723
 724     qdev_init_gpio_in(&s->busdev.qdev, gic_set_irq, GIC_NIRQ - 32);
 725     for (i = 0; i < NCPU; i++) {
 726         sysbus_init_irq(&s->busdev, &s->parent_irq[i]);
 727     }
 728     s->iomemtype = cpu_register_io_memory(0, gic_dist_readfn,
 729                                           gic_dist_writefn, s);
 730     gic_reset(s);
 731     register_savevm("arm_gic", -1, 1, gic_save, gic_load, s);
 732 }