1 /* ----------------------------------------------------------------------- *
3 * Copyright 1996-2009 The NASM Authors - All Rights Reserved
4 * See the file AUTHORS included with the NASM distribution for
5 * the specific copyright holders.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following
11 * * Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * * Redistributions in binary form must reproduce the above
14 * copyright notice, this list of conditions and the following
15 * disclaimer in the documentation and/or other materials provided
16 * with the distribution.
18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
19 * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
20 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
21 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
22 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
23 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
24 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
26 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
29 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
30 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32 * ----------------------------------------------------------------------- */
35 * nasmlib.h header file for nasmlib.c
38 #ifndef NASM_NASMLIB_H
39 #define NASM_NASMLIB_H
51 * tolower table -- avoids a function call on some platforms.
52 * NOTE: unlike the tolower() function in ctype, EOF is *NOT*
53 * a permitted value, for obvious reasons.
55 void tolower_init(void);
56 extern unsigned char nasm_tolower_tab
[256];
57 #define nasm_tolower(x) nasm_tolower_tab[(unsigned char)(x)]
59 /* Wrappers around <ctype.h> functions */
60 /* These are only valid for values that cannot include EOF */
61 #define nasm_isspace(x) isspace((unsigned char)(x))
62 #define nasm_isalpha(x) isalpha((unsigned char)(x))
63 #define nasm_isdigit(x) isdigit((unsigned char)(x))
64 #define nasm_isalnum(x) isalnum((unsigned char)(x))
65 #define nasm_isxdigit(x) isxdigit((unsigned char)(x))
68 * If this is defined, the wrappers around malloc et al will
69 * transform into logging variants, which will cause NASM to create
70 * a file called `malloc.log' when run, and spew details of all its
71 * memory management into that. That can then be analysed to detect
72 * memory leaks and potentially other problems too.
74 /* #define LOGALLOC */
77 * -------------------------
78 * Error reporting functions
79 * -------------------------
83 * An error reporting function should look like this.
85 typedef void (*efunc
) (int severity
, const char *fmt
, ...);
86 extern efunc nasm_malloc_error
;
89 * These are the error severity codes which get passed as the first
90 * argument to an efunc.
93 #define ERR_DEBUG 0x00000008 /* put out debugging message */
94 #define ERR_WARNING 0x00000000 /* warn only: no further action */
95 #define ERR_NONFATAL 0x00000001 /* terminate assembly after phase */
96 #define ERR_FATAL 0x00000002 /* instantly fatal: exit with error */
97 #define ERR_PANIC 0x00000003 /* internal error: panic instantly
98 * and dump core for reference */
99 #define ERR_MASK 0x0000000F /* mask off the above codes */
100 #define ERR_NOFILE 0x00000010 /* don't give source file name/line */
101 #define ERR_USAGE 0x00000020 /* print a usage message */
102 #define ERR_PASS1 0x00000040 /* only print this error on pass one */
103 #define ERR_PASS2 0x00000080
104 #define ERR_NO_SEVERITY 0x00000100 /* suppress printing severity */
107 * These codes define specific types of suppressible warning.
110 #define ERR_WARN_MASK 0xFFFFF000 /* the mask for this feature */
111 #define ERR_WARN_SHR 12 /* how far to shift right */
113 #define WARN(x) ((x) << ERR_WARN_SHR)
115 #define ERR_WARN_MNP WARN( 1) /* macro-num-parameters warning */
116 #define ERR_WARN_MSR WARN( 2) /* macro self-reference */
117 #define ERR_WARN_MDP WARN( 3) /* macro default parameters check */
118 #define ERR_WARN_OL WARN( 4) /* orphan label (no colon, and
120 #define ERR_WARN_NOV WARN( 5) /* numeric overflow */
121 #define ERR_WARN_GNUELF WARN( 6) /* using GNU ELF extensions */
122 #define ERR_WARN_FL_OVERFLOW WARN( 7) /* FP overflow */
123 #define ERR_WARN_FL_DENORM WARN( 8) /* FP denormal */
124 #define ERR_WARN_FL_UNDERFLOW WARN( 9) /* FP underflow */
125 #define ERR_WARN_FL_TOOLONG WARN(10) /* FP too many digits */
126 #define ERR_WARN_USER WARN(11) /* %warning directives */
127 #define ERR_WARN_MAX 11 /* the highest numbered one */
130 * Wrappers around malloc, realloc and free. nasm_malloc will
131 * fatal-error and die rather than return NULL; nasm_realloc will
132 * do likewise, and will also guarantee to work right on being
133 * passed a NULL pointer; nasm_free will do nothing if it is passed
136 void nasm_set_malloc_error(efunc
);
138 void *nasm_malloc(size_t);
139 void *nasm_zalloc(size_t);
140 void *nasm_realloc(void *, size_t);
141 void nasm_free(void *);
142 char *nasm_strdup(const char *);
143 char *nasm_strndup(const char *, size_t);
145 void *nasm_malloc_log(const char *, int, size_t);
146 void *nasm_zalloc_log(const char *, int, size_t);
147 void *nasm_realloc_log(const char *, int, void *, size_t);
148 void nasm_free_log(const char *, int, void *);
149 char *nasm_strdup_log(const char *, int, const char *);
150 char *nasm_strndup_log(const char *, int, const char *, size_t);
151 #define nasm_malloc(x) nasm_malloc_log(__FILE__,__LINE__,x)
152 #define nasm_zalloc(x) nasm_zalloc_log(__FILE__,__LINE__,x)
153 #define nasm_realloc(x,y) nasm_realloc_log(__FILE__,__LINE__,x,y)
154 #define nasm_free(x) nasm_free_log(__FILE__,__LINE__,x)
155 #define nasm_strdup(x) nasm_strdup_log(__FILE__,__LINE__,x)
156 #define nasm_strndup(x,y) nasm_strndup_log(__FILE__,__LINE__,x,y)
160 * NASM assert failure
162 no_return
nasm_assert_failed(const char *, int, const char *);
163 #define nasm_assert(x) \
165 if (unlikely(!(x))) \
166 nasm_assert_failed(__FILE__,__LINE__,#x); \
170 * ANSI doesn't guarantee the presence of `stricmp' or
173 #if defined(HAVE_STRCASECMP)
174 #define nasm_stricmp strcasecmp
175 #elif defined(HAVE_STRICMP)
176 #define nasm_stricmp stricmp
178 int nasm_stricmp(const char *, const char *);
181 #if defined(HAVE_STRNCASECMP)
182 #define nasm_strnicmp strncasecmp
183 #elif defined(HAVE_STRNICMP)
184 #define nasm_strnicmp strnicmp
186 int nasm_strnicmp(const char *, const char *, size_t);
189 int nasm_memicmp(const char *, const char *, size_t);
191 #if defined(HAVE_STRSEP)
192 #define nasm_strsep strsep
194 char *nasm_strsep(char **stringp
, const char *delim
);
199 * Convert a string into a number, using NASM number rules. Sets
200 * `*error' to true if an error occurs, and false otherwise.
202 int64_t readnum(char *str
, bool *error
);
205 * Convert a character constant into a number. Sets
206 * `*warn' to true if an overflow occurs, and false otherwise.
207 * str points to and length covers the middle of the string,
208 * without the quotes.
210 int64_t readstrnum(char *str
, int length
, bool *warn
);
213 * seg_init: Initialise the segment-number allocator.
214 * seg_alloc: allocate a hitherto unused segment number.
217 int32_t seg_alloc(void);
220 * many output formats will be able to make use of this: a standard
221 * function to add an extension to the name of the input file
224 void standard_extension(char *inname
, char *outname
, char *extension
,
231 * This is a useful #define which I keep meaning to use more often:
232 * the number of elements of a statically defined array.
235 #define elements(x) ( sizeof(x) / sizeof(*(x)) )
238 * some handy macros that will probably be of use in more than one
239 * output format: convert integers into little-endian byte packed
245 #define WRITECHAR(p,v) \
247 *(uint8_t *)(p) = (v); \
251 #define WRITESHORT(p,v) \
253 *(uint16_t *)(p) = (v); \
257 #define WRITELONG(p,v) \
259 *(uint32_t *)(p) = (v); \
263 #define WRITEDLONG(p,v) \
265 *(uint64_t *)(p) = (v); \
269 #define WRITEADDR(p,v,s) \
271 uint64_t _wa_v = (v); \
272 memcpy((p), &_wa_v, (s)); \
276 #else /* !X86_MEMORY */
278 #define WRITECHAR(p,v) \
280 uint8_t *_wc_p = (uint8_t *)(p); \
281 uint8_t _wc_v = (v); \
283 (p) = (void *)(_wc_p + 1); \
286 #define WRITESHORT(p,v) \
288 uint8_t *_ws_p = (uint8_t *)(p); \
289 uint16_t _ws_v = (v); \
291 _ws_p[1] = _ws_v >> 8; \
292 (p) = (void *)(_ws_p + 2); \
295 #define WRITELONG(p,v) \
297 uint8_t *_wl_p = (uint8_t *)(p); \
298 uint32_t _wl_v = (v); \
300 _wl_p[1] = _wl_v >> 8; \
301 _wl_p[2] = _wl_v >> 16; \
302 _wl_p[3] = _wl_v >> 24; \
303 (p) = (void *)(_wl_p + 4); \
306 #define WRITEDLONG(p,v) \
308 uint8_t *_wq_p = (uint8_t *)(p); \
309 uint64_t _wq_v = (v); \
311 _wq_p[1] = _wq_v >> 8; \
312 _wq_p[2] = _wq_v >> 16; \
313 _wq_p[3] = _wq_v >> 24; \
314 _wq_p[4] = _wq_v >> 32; \
315 _wq_p[5] = _wq_v >> 40; \
316 _wq_p[6] = _wq_v >> 48; \
317 _wq_p[7] = _wq_v >> 56; \
318 (p) = (void *)(_wq_p + 8); \
321 #define WRITEADDR(p,v,s) \
324 uint64_t _wa_v = (v); \
326 WRITECHAR(p,_wa_v); \
334 * and routines to do the same thing to a file
336 #define fwriteint8_t(d,f) putc(d,f)
337 void fwriteint16_t(uint16_t data
, FILE * fp
);
338 void fwriteint32_t(uint32_t data
, FILE * fp
);
339 void fwriteint64_t(uint64_t data
, FILE * fp
);
340 void fwriteaddr(uint64_t data
, int size
, FILE * fp
);
343 * Binary search routine. Returns index into `array' of an entry
344 * matching `string', or <0 if no match. `array' is taken to
345 * contain `size' elements.
347 * bsi() is case sensitive, bsii() is case insensitive.
349 int bsi(const char *string
, const char **array
, int size
);
350 int bsii(const char *string
, const char **array
, int size
);
352 char *src_set_fname(char *newname
);
353 int32_t src_set_linnum(int32_t newline
);
354 int32_t src_get_linnum(void);
356 * src_get may be used if you simply want to know the source file and line.
357 * It is also used if you maintain private status about the source location
358 * It return 0 if the information was the same as the last time you
359 * checked, -1 if the name changed and (new-old) if just the line changed.
361 int src_get(int32_t *xline
, char **xname
);
363 char *nasm_strcat(const char *one
, const char *two
);
365 const char *prefix_name(int);
367 #define ZERO_BUF_SIZE 4096
368 extern const uint8_t zero_buffer
[ZERO_BUF_SIZE
];
369 size_t fwritezero(size_t bytes
, FILE *fp
);