codeview.c: register all filenames

[nasm.git] / nasm.h

/* ----------------------------------------------------------------------- *
 *   
 *   Copyright 1996-2016 The NASM Authors - All Rights Reserved
 *   See the file AUTHORS included with the NASM distribution for
 *   the specific copyright holders.
 *
 *   Redistribution and use in source and binary forms, with or without
 *   modification, are permitted provided that the following
 *   conditions are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above
 *     copyright notice, this list of conditions and the following
 *     disclaimer in the documentation and/or other materials provided
 *     with the distribution.
 *     
 *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
 *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
 *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * ----------------------------------------------------------------------- */

/* 
 * nasm.h   main header file for the Netwide Assembler: inter-module interface
 */

#ifndef NASM_NASM_H
#define NASM_NASM_H

#include "compiler.h"

#include <stdio.h>
#include <inttypes.h>
#include "nasmlib.h"
#include "preproc.h"
#include "insnsi.h"     /* For enum opcode */
#include "directiv.h"   /* For enum directive */
#include "opflags.h"
#include "regs.h"

#define NO_SEG -1L              /* null segment value */
#define SEG_ABS 0x40000000L     /* mask for far-absolute segments */

#ifndef FILENAME_MAX
#define FILENAME_MAX 256
#endif

#ifndef PREFIX_MAX
#define PREFIX_MAX 10
#endif

#ifndef POSTFIX_MAX
#define POSTFIX_MAX 10
#endif

#define IDLEN_MAX 4096
#define DECOLEN_MAX 32

/*
 * Name pollution problems: <time.h> on Digital UNIX pulls in some
 * strange hardware header file which sees fit to define R_SP. We
 * undefine it here so as not to break the enum below.
 */
#ifdef R_SP
#undef R_SP
#endif

/*
 * We must declare the existence of this structure type up here,
 * since we have to reference it before we define it...
 */
struct ofmt;

/*
 * Values for the `type' parameter to an output function.
 *
 * Exceptions are OUT_RELxADR, which denote an x-byte relocation
 * which will be a relative jump. For this we need to know the
 * distance in bytes from the start of the relocated record until
 * the end of the containing instruction. _This_ is what is stored
 * in the size part of the parameter, in this case.
 *
 * Also OUT_RESERVE denotes reservation of N bytes of BSS space,
 * and the contents of the "data" parameter is irrelevant.
 *
 * The "data" parameter for the output function points to a "int32_t",
 * containing the address in question, unless the type is
 * OUT_RAWDATA, in which case it points to an "uint8_t"
 * array.
 */
enum out_type {
    OUT_RAWDATA,    /* Plain bytes */
    OUT_ADDRESS,    /* An address (symbol value) */
    OUT_RESERVE,    /* Reserved bytes (RESB et al) */
    OUT_REL1ADR,    /* 1-byte relative address */
    OUT_REL2ADR,    /* 2-byte relative address */
    OUT_REL4ADR,    /* 4-byte relative address */
    OUT_REL8ADR     /* 8-byte relative address */
};

/*
 * A label-lookup function.
 */
typedef bool (*lfunc)(char *label, int32_t *segment, int64_t *offset);

/*
 * And a label-definition function. The boolean parameter
 * `is_norm' states whether the label is a `normal' label (which
 * should affect the local-label system), or something odder like
 * an EQU or a segment-base symbol, which shouldn't.
 */
typedef void (*ldfunc)(char *label, int32_t segment, int64_t offset,
                       char *special, bool is_norm, bool isextrn);

void define_label(char *label, int32_t segment, int64_t offset,
                  char *special, bool is_norm, bool isextrn);

/*
 * Token types returned by the scanner, in addition to ordinary
 * ASCII character values, and zero for end-of-string.
 */
enum token_type { /* token types, other than chars */
    TOKEN_INVALID = -1, /* a placeholder value */
    TOKEN_EOS = 0,      /* end of string */
    TOKEN_EQ = '=',
    TOKEN_GT = '>',
    TOKEN_LT = '<',     /* aliases */
    TOKEN_ID = 256,     /* identifier */
    TOKEN_NUM,          /* numeric constant */
    TOKEN_ERRNUM,       /* malformed numeric constant */
    TOKEN_STR,          /* string constant */
    TOKEN_ERRSTR,       /* unterminated string constant */
    TOKEN_FLOAT,        /* floating-point constant */
    TOKEN_REG,          /* register name */
    TOKEN_INSN,         /* instruction name */
    TOKEN_HERE,         /* $ */
    TOKEN_BASE,         /* $$ */
    TOKEN_SPECIAL,      /* BYTE, WORD, DWORD, QWORD, FAR, NEAR, etc */
    TOKEN_PREFIX,       /* A32, O16, LOCK, REPNZ, TIMES, etc */
    TOKEN_SHL,          /* << */
    TOKEN_SHR,          /* >> */
    TOKEN_SDIV,         /* // */
    TOKEN_SMOD,         /* %% */
    TOKEN_GE,           /* >= */
    TOKEN_LE,           /* <= */
    TOKEN_NE,           /* <> (!= is same as <>) */
    TOKEN_DBL_AND,      /* && */
    TOKEN_DBL_OR,       /* || */
    TOKEN_DBL_XOR,      /* ^^ */
    TOKEN_SEG,          /* SEG */
    TOKEN_WRT,          /* WRT */
    TOKEN_FLOATIZE,     /* __floatX__ */
    TOKEN_STRFUNC,      /* __utf16*__, __utf32*__ */
    TOKEN_IFUNC,        /* __ilog2*__ */
    TOKEN_DECORATOR,    /* decorators such as {...} */
    TOKEN_OPMASK        /* translated token for opmask registers */
};

enum floatize {
    FLOAT_8,
    FLOAT_16,
    FLOAT_32,
    FLOAT_64,
    FLOAT_80M,
    FLOAT_80E,
    FLOAT_128L,
    FLOAT_128H
};

/* Must match the list in string_transform(), in strfunc.c */
enum strfunc {
    STRFUNC_UTF16,
    STRFUNC_UTF16LE,
    STRFUNC_UTF16BE,
    STRFUNC_UTF32,
    STRFUNC_UTF32LE,
    STRFUNC_UTF32BE
};

enum ifunc {
    IFUNC_ILOG2E,
    IFUNC_ILOG2W,
    IFUNC_ILOG2F,
    IFUNC_ILOG2C
};

size_t string_transform(char *, size_t, char **, enum strfunc);

/*
 * The expression evaluator must be passed a scanner function; a
 * standard scanner is provided as part of nasmlib.c. The
 * preprocessor will use a different one. Scanners, and the
 * token-value structures they return, look like this.
 *
 * The return value from the scanner is always a copy of the
 * `t_type' field in the structure.
 */
struct tokenval {
    char                *t_charptr;
    int64_t             t_integer;
    int64_t             t_inttwo;
    enum token_type     t_type;
    int8_t              t_flag;
};
typedef int (*scanner)(void *private_data, struct tokenval *tv);

struct location {
    int64_t offset;
    int32_t segment;
    int     known;
};

/*
 * Expression-evaluator datatype. Expressions, within the
 * evaluator, are stored as an array of these beasts, terminated by
 * a record with type==0. Mostly, it's a vector type: each type
 * denotes some kind of a component, and the value denotes the
 * multiple of that component present in the expression. The
 * exception is the WRT type, whose `value' field denotes the
 * segment to which the expression is relative. These segments will
 * be segment-base types, i.e. either odd segment values or SEG_ABS
 * types. So it is still valid to assume that anything with a
 * `value' field of zero is insignificant.
 */
typedef struct {
    int32_t type;                  /* a register, or EXPR_xxx */
    int64_t value;                 /* must be >= 32 bits */
} expr;

/*
 * Library routines to manipulate expression data types.
 */
int is_reloc(expr *vect);
int is_simple(expr *vect);
int is_really_simple(expr *vect);
int is_unknown(expr *vect);
int is_just_unknown(expr *vect);
int64_t reloc_value(expr *vect);
int32_t reloc_seg(expr *vect);
int32_t reloc_wrt(expr *vect);

/*
 * The evaluator can also return hints about which of two registers
 * used in an expression should be the base register. See also the
 * `operand' structure.
 */
struct eval_hints {
    int64_t base;
    int     type;
};

/*
 * The actual expression evaluator function looks like this. When
 * called, it expects the first token of its expression to already
 * be in `*tv'; if it is not, set tv->t_type to TOKEN_INVALID and
 * it will start by calling the scanner.
 *
 * If a forward reference happens during evaluation, the evaluator
 * must set `*fwref' to true if `fwref' is non-NULL.
 *
 * `critical' is non-zero if the expression may not contain forward
 * references. The evaluator will report its own error if this
 * occurs; if `critical' is 1, the error will be "symbol not
 * defined before use", whereas if `critical' is 2, the error will
 * be "symbol undefined".
 *
 * If `critical' has bit 8 set (in addition to its main value: 0x101
 * and 0x102 correspond to 1 and 2) then an extended expression
 * syntax is recognised, in which relational operators such as =, <
 * and >= are accepted, as well as low-precedence logical operators
 * &&, ^^ and ||.
 *
 * If `hints' is non-NULL, it gets filled in with some hints as to
 * the base register in complex effective addresses.
 */
#define CRITICAL 0x100
typedef expr *(*evalfunc)(scanner sc, void *scprivate,
                          struct tokenval *tv, int *fwref, int critical,
                          struct eval_hints *hints);

/*
 * Special values for expr->type.
 * These come after EXPR_REG_END as defined in regs.h.
 * Expr types : 0 ~ EXPR_REG_END, EXPR_UNKNOWN, EXPR_...., EXPR_RDSAE,
 *              EXPR_SEGBASE ~ EXPR_SEGBASE + SEG_ABS, ...
 */
#define EXPR_UNKNOWN    (EXPR_REG_END+1) /* forward references */
#define EXPR_SIMPLE     (EXPR_REG_END+2)
#define EXPR_WRT        (EXPR_REG_END+3)
#define EXPR_RDSAE      (EXPR_REG_END+4)
#define EXPR_SEGBASE    (EXPR_REG_END+5)

/*
 * Linked list of strings
 */
typedef struct string_list {
    struct string_list  *next;
    char                str[1];
} StrList;

/*
 * preprocessors ought to look like this:
 */
struct preproc_ops {
    /*
     * Called at the start of a pass; given a file name, the number
     * of the pass, an error reporting function, an evaluator
     * function, and a listing generator to talk to.
     */
    void (*reset)(char *file, int pass, StrList **deplist);

    /*
     * Called to fetch a line of preprocessed source. The line
     * returned has been malloc'ed, and so should be freed after
     * use.
     */
    char *(*getline)(void);

    /* Called at the end of a pass */
    void (*cleanup)(int pass);

    /* Additional macros specific to output format */
    void (*extra_stdmac)(macros_t *macros);

    /* Early definitions and undefinitions for macros */
    void (*pre_define)(char *definition);
    void (*pre_undefine)(char *definition);

    /* Include file from command line */
    void (*pre_include)(char *fname);

    /* Include path from command line */
    void (*include_path)(char *path);

    /* Unwind the macro stack when printing an error message */
    void (*error_list_macros)(int severity);
};

extern const struct preproc_ops nasmpp;
extern const struct preproc_ops preproc_nop;

/*
 * Some lexical properties of the NASM source language, included
 * here because they are shared between the parser and preprocessor.
 */

/*
 * isidstart matches any character that may start an identifier, and isidchar
 * matches any character that may appear at places other than the start of an
 * identifier. E.g. a period may only appear at the start of an identifier
 * (for local labels), whereas a number may appear anywhere *but* at the
 * start.
 * isbrcchar matches any character that may placed inside curly braces as a
 * decorator. E.g. {rn-sae}, {1to8}, {k1}{z}
 */

#define isidstart(c) (nasm_isalpha(c)   ||  \
                      (c) == '_'        ||  \
                      (c) == '.'        ||  \
                      (c) == '?'        ||  \
                      (c) == '@')

#define isidchar(c) (isidstart(c)       ||  \
                     nasm_isdigit(c)    ||  \
                     (c) == '$'         ||  \
                     (c) == '#'         ||  \
                     (c) == '~')

#define isbrcchar(c) (isidchar(c)       ||  \
                      (c) == '-')

/* Ditto for numeric constants. */

#define isnumstart(c)  (nasm_isdigit(c) || (c) == '$')
#define isnumchar(c)   (nasm_isalnum(c) || (c) == '_')

/*
 * Data-type flags that get passed to listing-file routines.
 */
enum {
    LIST_READ,
    LIST_MACRO,
    LIST_MACRO_NOLIST,
    LIST_INCLUDE,
    LIST_INCBIN,
    LIST_TIMES
};

/*
 * -----------------------------------------------------------
 * Format of the `insn' structure returned from `parser.c' and
 * passed into `assemble.c'
 * -----------------------------------------------------------
 */

/* Verify value to be a valid register */
static inline bool is_register(int reg)
{
    return reg >= EXPR_REG_START && reg < REG_ENUM_LIMIT;
}

enum ccode { /* condition code names */
    C_A, C_AE, C_B, C_BE, C_C, C_E, C_G, C_GE, C_L, C_LE, C_NA, C_NAE,
    C_NB, C_NBE, C_NC, C_NE, C_NG, C_NGE, C_NL, C_NLE, C_NO, C_NP,
    C_NS, C_NZ, C_O, C_P, C_PE, C_PO, C_S, C_Z,
    C_none = -1
};

/*
 * token flags
 */
#define TFLAG_BRC       (1 << 0)    /* valid only with braces. {1to8}, {rd-sae}, ...*/
#define TFLAG_BRC_OPT   (1 << 1)    /* may or may not have braces. opmasks {k1} */
#define TFLAG_BRC_ANY   (TFLAG_BRC | TFLAG_BRC_OPT)
#define TFLAG_BRDCAST   (1 << 2)    /* broadcasting decorator */
#define TFLAG_WARN      (1 << 3)    /* warning only, treat as ID */

static inline uint8_t get_cond_opcode(enum ccode c)
{
    static const uint8_t ccode_opcodes[] = {
        0x7, 0x3, 0x2, 0x6, 0x2, 0x4, 0xf, 0xd, 0xc, 0xe, 0x6, 0x2,
        0x3, 0x7, 0x3, 0x5, 0xe, 0xc, 0xd, 0xf, 0x1, 0xb, 0x9, 0x5,
        0x0, 0xa, 0xa, 0xb, 0x8, 0x4
    };

        return ccode_opcodes[(int)c];
}

/*
 * REX flags
 */
#define REX_MASK    0x4f    /* Actual REX prefix bits */
#define REX_B       0x01    /* ModRM r/m extension */
#define REX_X       0x02    /* SIB index extension */
#define REX_R       0x04    /* ModRM reg extension */
#define REX_W       0x08    /* 64-bit operand size */
#define REX_L       0x20    /* Use LOCK prefix instead of REX.R */
#define REX_P       0x40    /* REX prefix present/required */
#define REX_H       0x80    /* High register present, REX forbidden */
#define REX_V       0x0100  /* Instruction uses VEX/XOP instead of REX */
#define REX_NH      0x0200  /* Instruction which doesn't use high regs */
#define REX_EV      0x0400  /* Instruction uses EVEX instead of REX */

/*
 * EVEX bit field
 */
#define EVEX_P0MM       0x03        /* EVEX P[1:0] : Legacy escape        */
#define EVEX_P0RP       0x10        /* EVEX P[4] : High-16 reg            */
#define EVEX_P0X        0x40        /* EVEX P[6] : High-16 rm             */
#define EVEX_P1PP       0x03        /* EVEX P[9:8] : Legacy prefix        */
#define EVEX_P1VVVV     0x78        /* EVEX P[14:11] : NDS register       */
#define EVEX_P1W        0x80        /* EVEX P[15] : Osize extension       */
#define EVEX_P2AAA      0x07        /* EVEX P[18:16] : Embedded opmask    */
#define EVEX_P2VP       0x08        /* EVEX P[19] : High-16 NDS reg       */
#define EVEX_P2B        0x10        /* EVEX P[20] : Broadcast / RC / SAE  */
#define EVEX_P2LL       0x60        /* EVEX P[22:21] : Vector length      */
#define EVEX_P2RC       EVEX_P2LL   /* EVEX P[22:21] : Rounding control   */
#define EVEX_P2Z        0x80        /* EVEX P[23] : Zeroing/Merging       */

/*
 * REX_V "classes" (prefixes which behave like VEX)
 */
enum vex_class {
    RV_VEX      = 0,    /* C4/C5 */
    RV_XOP      = 1,    /* 8F */
    RV_EVEX     = 2     /* 62 */
};

/*
 * Note that because segment registers may be used as instruction
 * prefixes, we must ensure the enumerations for prefixes and
 * register names do not overlap.
 */
enum prefixes { /* instruction prefixes */
    P_none = 0,
    PREFIX_ENUM_START = REG_ENUM_LIMIT,
    P_A16 = PREFIX_ENUM_START,
    P_A32,
    P_A64,
    P_ASP,
    P_LOCK,
    P_O16,
    P_O32,
    P_O64,
    P_OSP,
    P_REP,
    P_REPE,
    P_REPNE,
    P_REPNZ,
    P_REPZ,
    P_TIMES,
    P_WAIT,
    P_XACQUIRE,
    P_XRELEASE,
    P_BND,
    P_NOBND,
    P_EVEX,
    P_VEX3,
    P_VEX2,
    PREFIX_ENUM_LIMIT
};

enum extop_type { /* extended operand types */
    EOT_NOTHING,
    EOT_DB_STRING,      /* Byte string */
    EOT_DB_STRING_FREE, /* Byte string which should be nasm_free'd*/
    EOT_DB_NUMBER       /* Integer */
};

enum ea_flags { /* special EA flags */
    EAF_BYTEOFFS    =  1,   /* force offset part to byte size */
    EAF_WORDOFFS    =  2,   /* force offset part to [d]word size */
    EAF_TIMESTWO    =  4,   /* really do EAX*2 not EAX+EAX */
    EAF_REL         =  8,   /* IP-relative addressing */
    EAF_ABS         = 16,   /* non-IP-relative addressing */
    EAF_FSGS        = 32,   /* fs/gs segment override present */
    EAF_MIB         = 64    /* mib operand */
};

enum eval_hint { /* values for `hinttype' */
    EAH_NOHINT   = 0,       /* no hint at all - our discretion */
    EAH_MAKEBASE = 1,       /* try to make given reg the base */
    EAH_NOTBASE  = 2,       /* try _not_ to make reg the base */
    EAH_SUMMED   = 3        /* base and index are summed into index */
};

typedef struct operand { /* operand to an instruction */
    opflags_t       type;       /* type of operand */
    int             disp_size;  /* 0 means default; 16; 32; 64 */
    enum reg_enum   basereg;
    enum reg_enum   indexreg;   /* address registers */
    int             scale;      /* index scale */
    int             hintbase;
    enum eval_hint  hinttype;   /* hint as to real base register */
    int32_t         segment;    /* immediate segment, if needed */
    int64_t         offset;     /* any immediate number */
    int32_t         wrt;        /* segment base it's relative to */
    int             eaflags;    /* special EA flags */
    int             opflags;    /* see OPFLAG_* defines below */
    decoflags_t     decoflags;  /* decorator flags such as {...} */
} operand;

#define OPFLAG_FORWARD      1   /* operand is a forward reference */
#define OPFLAG_EXTERN       2   /* operand is an external reference */
#define OPFLAG_UNKNOWN      4   /* operand is an unknown reference 
                                 * (always a forward reference also)
                                 */

typedef struct extop { /* extended operand */
    struct extop    *next;      /* linked list */
    char            *stringval; /* if it's a string, then here it is */
    size_t          stringlen;  /* ... and here's how long it is */
    int64_t         offset;     /* ... it's given here ... */
    int32_t         segment;    /* if it's a number/address, then... */
    int32_t         wrt;        /* ... and here */
    enum extop_type type;       /* defined above */
} extop;

enum ea_type {
    EA_INVALID,     /* Not a valid EA at all */
    EA_SCALAR,      /* Scalar EA */
    EA_XMMVSIB,     /* XMM vector EA */
    EA_YMMVSIB,     /* YMM vector EA */
    EA_ZMMVSIB      /* ZMM vector EA */
};

/*
 * Prefix positions: each type of prefix goes in a specific slot.
 * This affects the final ordering of the assembled output, which
 * shouldn't matter to the processor, but if you have stylistic
 * preferences, you can change this.  REX prefixes are handled
 * differently for the time being.
 *
 * LOCK and REP used to be one slot; this is no longer the case since
 * the introduction of HLE.
 */
enum prefix_pos {
    PPS_WAIT,   /* WAIT (technically not a prefix!) */
    PPS_REP,    /* REP/HLE prefix */
    PPS_LOCK,   /* LOCK prefix */
    PPS_SEG,    /* Segment override prefix */
    PPS_OSIZE,  /* Operand size prefix */
    PPS_ASIZE,  /* Address size prefix */
    PPS_VEX,    /* VEX type */
    MAXPREFIX   /* Total number of prefix slots */
};

/*
 * Tuple types that are used when determining Disp8*N eligibility
 * The order must match with a hash %tuple_codes in insns.pl
 */
enum ttypes {
    FV    = 001,
    HV    = 002,
    FVM   = 003,
    T1S8  = 004,
    T1S16 = 005,
    T1S   = 006,
    T1F32 = 007,
    T1F64 = 010,
    T2    = 011,
    T4    = 012,
    T8    = 013,
    HVM   = 014,
    QVM   = 015,
    OVM   = 016,
    M128  = 017,
    DUP   = 020
};

/* EVEX.L'L : Vector length on vector insns */
enum vectlens {
    VL128 = 0,
    VL256 = 1,
    VL512 = 2,
    VLMAX = 3
};

/* If you need to change this, also change it in insns.pl */
#define MAX_OPERANDS 5

typedef struct insn { /* an instruction itself */
    char            *label;                 /* the label defined, or NULL */
    int             prefixes[MAXPREFIX];    /* instruction prefixes, if any */
    enum opcode     opcode;                 /* the opcode - not just the string */
    enum ccode      condition;              /* the condition code, if Jcc/SETcc */
    int             operands;               /* how many operands? 0-3 (more if db et al) */
    int             addr_size;              /* address size */
    operand         oprs[MAX_OPERANDS];     /* the operands, defined as above */
    extop           *eops;                  /* extended operands */
    int             eops_float;             /* true if DD and floating */
    int32_t         times;                  /* repeat count (TIMES prefix) */
    bool            forw_ref;               /* is there a forward reference? */
    bool            rex_done;               /* REX prefix emitted? */
    int             rex;                    /* Special REX Prefix */
    int             vexreg;                 /* Register encoded in VEX prefix */
    int             vex_cm;                 /* Class and M field for VEX prefix */
    int             vex_wlp;                /* W, P and L information for VEX prefix */
    uint8_t         evex_p[3];              /* EVEX.P0: [RXB,R',00,mm], P1: [W,vvvv,1,pp] */
                                            /* EVEX.P2: [z,L'L,b,V',aaa] */
    enum ttypes     evex_tuple;             /* Tuple type for compressed Disp8*N */
    int             evex_rm;                /* static rounding mode for AVX512 (EVEX) */
    int8_t          evex_brerop;            /* BR/ER/SAE operand position */
} insn;

enum geninfo { GI_SWITCH };

/* Instruction flags type: IF_* flags are defined in insns.h */
typedef uint64_t iflags_t;

/*
 * The data structure defining an output format driver, and the
 * interfaces to the functions therein.
 */
struct ofmt {
    /*
     * This is a short (one-liner) description of the type of
     * output generated by the driver.
     */
    const char *fullname;

    /*
     * This is a single keyword used to select the driver.
     */
    const char *shortname;

    /*
     * Output format flags.
     */
#define OFMT_TEXT   1           /* Text file format */
    unsigned int flags;

    int maxbits;                /* Maximum segment bits supported */

    /*
     * this is a pointer to the first element of the debug information
     */
    struct dfmt **debug_formats;

    /*
     * the default debugging format if -F is not specified
     */
    const struct dfmt *default_dfmt;

    /*
     * This, if non-NULL, is a NULL-terminated list of `char *'s
     * pointing to extra standard macros supplied by the object
     * format (e.g. a sensible initial default value of __SECT__,
     * and user-level equivalents for any format-specific
     * directives).
     */
    macros_t *stdmac;

    /*
     * This procedure is called at the start of an output session to set
     * up internal parameters.
     */
    void (*init)(void);

    /*
     * This procedure is called to pass generic information to the
     * object file.  The first parameter gives the information type
     * (currently only command line switches)
     * and the second parameter gives the value.  This function returns
     * 1 if recognized, 0 if unrecognized
     */
    int (*setinfo)(enum geninfo type, char **string);

    /*
     * This procedure is called by assemble() to write actual
     * generated code or data to the object file. Typically it
     * doesn't have to actually _write_ it, just store it for
     * later.
     *
     * The `type' argument specifies the type of output data, and
     * usually the size as well: its contents are described below.
     */
    void (*output)(int32_t segto, const void *data,
                   enum out_type type, uint64_t size,
                   int32_t segment, int32_t wrt);

    /*
     * This procedure is called once for every symbol defined in
     * the module being assembled. It gives the name and value of
     * the symbol, in NASM's terms, and indicates whether it has
     * been declared to be global. Note that the parameter "name",
     * when passed, will point to a piece of static storage
     * allocated inside the label manager - it's safe to keep using
     * that pointer, because the label manager doesn't clean up
     * until after the output driver has.
     *
     * Values of `is_global' are: 0 means the symbol is local; 1
     * means the symbol is global; 2 means the symbol is common (in
     * which case `offset' holds the _size_ of the variable).
     * Anything else is available for the output driver to use
     * internally.
     *
     * This routine explicitly _is_ allowed to call the label
     * manager to define further symbols, if it wants to, even
     * though it's been called _from_ the label manager. That much
     * re-entrancy is guaranteed in the label manager. However, the
     * label manager will in turn call this routine, so it should
     * be prepared to be re-entrant itself.
     *
     * The `special' parameter contains special information passed
     * through from the command that defined the label: it may have
     * been an EXTERN, a COMMON or a GLOBAL. The distinction should
     * be obvious to the output format from the other parameters.
     */
    void (*symdef)(char *name, int32_t segment, int64_t offset,
                   int is_global, char *special);

    /*
     * This procedure is called when the source code requests a
     * segment change. It should return the corresponding segment
     * _number_ for the name, or NO_SEG if the name is not a valid
     * segment name.
     *
     * It may also be called with NULL, in which case it is to
     * return the _default_ section number for starting assembly in.
     *
     * It is allowed to modify the string it is given a pointer to.
     *
     * It is also allowed to specify a default instruction size for
     * the segment, by setting `*bits' to 16 or 32. Or, if it
     * doesn't wish to define a default, it can leave `bits' alone.
     */
    int32_t (*section)(char *name, int pass, int *bits);

    /*
     * This procedure is called to modify section alignment,
     * note there is a trick, the alignment can only increase
     */
    void (*sectalign)(int32_t seg, unsigned int value);

    /*
     * This procedure is called to modify the segment base values
     * returned from the SEG operator. It is given a segment base
     * value (i.e. a segment value with the low bit set), and is
     * required to produce in return a segment value which may be
     * different. It can map segment bases to absolute numbers by
     * means of returning SEG_ABS types.
     *
     * It should return NO_SEG if the segment base cannot be
     * determined; the evaluator (which calls this routine) is
     * responsible for throwing an error condition if that occurs
     * in pass two or in a critical expression.
     */
    int32_t (*segbase)(int32_t segment);

    /*
     * This procedure is called to allow the output driver to
     * process its own specific directives. When called, it has the
     * directive word in `directive' and the parameter string in
     * `value'. It is called in both assembly passes, and `pass'
     * will be either 1 or 2.
     *
     * This procedure should return zero if it does not _recognise_
     * the directive, so that the main program can report an error.
     * If it recognises the directive but then has its own errors,
     * it should report them itself and then return non-zero. It
     * should also return non-zero if it correctly processes the
     * directive.
     */
    int (*directive)(enum directives directive, char *value, int pass);

    /*
     * This procedure is called before anything else - even before
     * the "init" routine - and is passed the name of the input
     * file from which this output file is being generated. It
     * should return its preferred name for the output file in
     * `outname', if outname[0] is not '\0', and do nothing to
     * `outname' otherwise. Since it is called before the driver is
     * properly initialized, it has to be passed its error handler
     * separately.
     *
     * This procedure may also take its own copy of the input file
     * name for use in writing the output file: it is _guaranteed_
     * that it will be called before the "init" routine.
     *
     * The parameter `outname' points to an area of storage
     * guaranteed to be at least FILENAME_MAX in size.
     */
    void (*filename)(char *inname, char *outname);

    /*
     * This procedure is called after assembly finishes, to allow
     * the output driver to clean itself up and free its memory.
     * Typically, it will also be the point at which the object
     * file actually gets _written_.
     *
     * One thing the cleanup routine should always do is to close
     * the output file pointer.
     */
    void (*cleanup)(void);
};

/*
 * Output format driver alias
 */
struct ofmt_alias {
    const char  *shortname;
    const char  *fullname;
    struct ofmt *ofmt;
};

extern struct ofmt *ofmt;
extern FILE *ofile;

/*
 * ------------------------------------------------------------
 * The data structure defining a debug format driver, and the
 * interfaces to the functions therein.
 * ------------------------------------------------------------
 */

struct dfmt {
    /*
     * This is a short (one-liner) description of the type of
     * output generated by the driver.
     */
    const char *fullname;

    /*
     * This is a single keyword used to select the driver.
     */
    const char *shortname;

    /*
     * init - called initially to set up local pointer to object format.
     */
    void (*init)(void);

    /*
     * linenum - called any time there is output with a change of
     * line number or file.
     */
    void (*linenum)(const char *filename, int32_t linenumber, int32_t segto);

    /*
     * debug_deflabel - called whenever a label is defined. Parameters
     * are the same as to 'symdef()' in the output format. This function
     * is called after the output format version.
     */

    void (*debug_deflabel)(char *name, int32_t segment, int64_t offset,
                           int is_global, char *special);
    /*
     * debug_directive - called whenever a DEBUG directive other than 'LINE'
     * is encountered. 'directive' contains the first parameter to the
     * DEBUG directive, and params contains the rest. For example,
     * 'DEBUG VAR _somevar:int' would translate to a call to this
     * function with 'directive' equal to "VAR" and 'params' equal to
     * "_somevar:int".
     */
    void (*debug_directive)(const char *directive, const char *params);

    /*
     * typevalue - called whenever the assembler wishes to register a type
     * for the last defined label.  This routine MUST detect if a type was
     * already registered and not re-register it.
     */
    void (*debug_typevalue)(int32_t type);

    /*
     * debug_output - called whenever output is required
     * 'type' is the type of info required, and this is format-specific
     */
    void (*debug_output)(int type, void *param);

    /*
     * cleanup - called after processing of file is complete
     */
    void (*cleanup)(void);
};

extern const struct dfmt *dfmt;

/*
 * The type definition macros
 * for debugging
 *
 * low 3 bits: reserved
 * next 5 bits: type
 * next 24 bits: number of elements for arrays (0 for labels)
 */

#define TY_UNKNOWN 0x00
#define TY_LABEL   0x08
#define TY_BYTE    0x10
#define TY_WORD    0x18
#define TY_DWORD   0x20
#define TY_FLOAT   0x28
#define TY_QWORD   0x30
#define TY_TBYTE   0x38
#define TY_OWORD   0x40
#define TY_YWORD   0x48
#define TY_COMMON  0xE0
#define TY_SEG     0xE8
#define TY_EXTERN  0xF0
#define TY_EQU     0xF8

#define TYM_TYPE(x)     ((x) & 0xF8)
#define TYM_ELEMENTS(x) (((x) & 0xFFFFFF00) >> 8)

#define TYS_ELEMENTS(x) ((x) << 8)

enum special_tokens {
    SPECIAL_ENUM_START  = PREFIX_ENUM_LIMIT,
    S_ABS               = SPECIAL_ENUM_START,
    S_BYTE,
    S_DWORD,
    S_FAR,
    S_LONG,
    S_NEAR,
    S_NOSPLIT,
    S_OWORD,
    S_QWORD,
    S_REL,
    S_SHORT,
    S_STRICT,
    S_TO,
    S_TWORD,
    S_WORD,
    S_YWORD,
    S_ZWORD,
    SPECIAL_ENUM_LIMIT
};

enum decorator_tokens {
    DECORATOR_ENUM_START    = SPECIAL_ENUM_LIMIT,
    BRC_1TO2                = DECORATOR_ENUM_START,
    BRC_1TO4,
    BRC_1TO8,
    BRC_1TO16,
    BRC_RN,
    BRC_RD,
    BRC_RU,
    BRC_RZ,
    BRC_SAE,
    BRC_Z,
    DECORATOR_ENUM_LIMIT
};

/*
 * AVX512 Decorator (decoflags_t) bits distribution (counted from 0)
 *  3         2         1
 * 10987654321098765432109876543210
 *                |
 *                | word boundary
 * ............................1111 opmask
 * ...........................1.... zeroing / merging
 * ..........................1..... broadcast
 * .........................1...... static rounding
 * ........................1....... SAE
 * ......................11........ broadcast element size
 * ....................11.......... number of broadcast elements
 */
#define OP_GENVAL(val, bits, shift)     (((val) & ((UINT64_C(1) << (bits)) - 1)) << (shift))

/*
 * Opmask register number
 * identical to EVEX.aaa
 *
 * Bits: 0 - 3
 */
#define OPMASK_SHIFT            (0)
#define OPMASK_BITS             (4)
#define OPMASK_MASK             OP_GENMASK(OPMASK_BITS, OPMASK_SHIFT)
#define GEN_OPMASK(bit)         OP_GENBIT(bit, OPMASK_SHIFT)
#define VAL_OPMASK(val)         OP_GENVAL(val, OPMASK_BITS, OPMASK_SHIFT)

/*
 * zeroing / merging control available
 * matching to EVEX.z
 *
 * Bits: 4
 */
#define Z_SHIFT                 (4)
#define Z_BITS                  (1)
#define Z_MASK                  OP_GENMASK(Z_BITS, Z_SHIFT)
#define GEN_Z(bit)              OP_GENBIT(bit, Z_SHIFT)

/*
 * broadcast - Whether this operand can be broadcasted
 *
 * Bits: 5
 */
#define BRDCAST_SHIFT           (5)
#define BRDCAST_BITS            (1)
#define BRDCAST_MASK            OP_GENMASK(BRDCAST_BITS, BRDCAST_SHIFT)
#define GEN_BRDCAST(bit)        OP_GENBIT(bit, BRDCAST_SHIFT)

/*
 * Whether this instruction can have a static rounding mode.
 * It goes with the last simd operand because the static rounding mode
 * decorator is located between the last simd operand and imm8 (if any).
 *
 * Bits: 6
 */
#define STATICRND_SHIFT         (6)
#define STATICRND_BITS          (1)
#define STATICRND_MASK          OP_GENMASK(STATICRND_BITS, STATICRND_SHIFT)
#define GEN_STATICRND(bit)      OP_GENBIT(bit, STATICRND_SHIFT)

/*
 * SAE(Suppress all exception) available
 *
 * Bits: 7
 */
#define SAE_SHIFT               (7)
#define SAE_BITS                (1)
#define SAE_MASK                OP_GENMASK(SAE_BITS, SAE_SHIFT)
#define GEN_SAE(bit)            OP_GENBIT(bit, SAE_SHIFT)

/*
 * Broadcasting element size.
 *
 * Bits: 8 - 9
 */
#define BRSIZE_SHIFT            (8)
#define BRSIZE_BITS             (2)
#define BRSIZE_MASK             OP_GENMASK(BRSIZE_BITS, BRSIZE_SHIFT)
#define GEN_BRSIZE(bit)         OP_GENBIT(bit, BRSIZE_SHIFT)

#define BR_BITS32               GEN_BRSIZE(0)
#define BR_BITS64               GEN_BRSIZE(1)

/*
 * Number of broadcasting elements
 *
 * Bits: 10 - 11
 */
#define BRNUM_SHIFT             (10)
#define BRNUM_BITS              (2)
#define BRNUM_MASK              OP_GENMASK(BRNUM_BITS, BRNUM_SHIFT)
#define VAL_BRNUM(val)          OP_GENVAL(val, BRNUM_BITS, BRNUM_SHIFT)

#define BR_1TO2                 VAL_BRNUM(0)
#define BR_1TO4                 VAL_BRNUM(1)
#define BR_1TO8                 VAL_BRNUM(2)
#define BR_1TO16                VAL_BRNUM(3)

#define MASK                    OPMASK_MASK             /* Opmask (k1 ~ 7) can be used */
#define Z                       Z_MASK
#define B32                     (BRDCAST_MASK|BR_BITS32) /* {1to16} : broadcast 32b * 16 to zmm(512b) */
#define B64                     (BRDCAST_MASK|BR_BITS64) /* {1to8}  : broadcast 64b *  8 to zmm(512b) */
#define ER                      STATICRND_MASK          /* ER(Embedded Rounding) == Static rounding mode */
#define SAE                     SAE_MASK                /* SAE(Suppress All Exception) */

/*
 * Global modes
 */

/*
 * This declaration passes the "pass" number to all other modules
 * "pass0" assumes the values: 0, 0, ..., 0, 1, 2
 * where 0 = optimizing pass
 *       1 = pass 1
 *       2 = pass 2
 */

extern int pass0;
extern int passn;               /* Actual pass number */

extern bool tasm_compatible_mode;
extern int optimizing;
extern int globalbits;          /* 16, 32 or 64-bit mode */
extern int globalrel;           /* default to relative addressing? */
extern int globalbnd;           /* default to using bnd prefix? */

/*
 * NASM version strings, defined in ver.c
 */
extern const char nasm_version[];
extern const char nasm_date[];
extern const char nasm_compile_options[];
extern const char nasm_comment[];
extern const char nasm_signature[];

#endif