ide-floppy: add a debug_mask module parameter
[linux-2.6/verdex.git] / drivers / ide / ide-floppy.c
bloba11ec86925a36a687e2e45fd74c1e0f777911bf3
1 /*
2 * IDE ATAPI floppy driver.
4 * Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il>
5 * Copyright (C) 2000-2002 Paul Bristow <paul@paulbristow.net>
6 * Copyright (C) 2005 Bartlomiej Zolnierkiewicz
8 * This driver supports the following IDE floppy drives:
10 * LS-120/240 SuperDisk
11 * Iomega Zip 100/250
12 * Iomega PC Card Clik!/PocketZip
14 * For a historical changelog see
15 * Documentation/ide/ChangeLog.ide-floppy.1996-2002
18 #define DRV_NAME "ide-floppy"
19 #define PFX DRV_NAME ": "
21 #define IDEFLOPPY_VERSION "1.00"
23 #include <linux/module.h>
24 #include <linux/types.h>
25 #include <linux/string.h>
26 #include <linux/kernel.h>
27 #include <linux/delay.h>
28 #include <linux/timer.h>
29 #include <linux/mm.h>
30 #include <linux/interrupt.h>
31 #include <linux/major.h>
32 #include <linux/errno.h>
33 #include <linux/genhd.h>
34 #include <linux/slab.h>
35 #include <linux/cdrom.h>
36 #include <linux/ide.h>
37 #include <linux/hdreg.h>
38 #include <linux/bitops.h>
39 #include <linux/mutex.h>
40 #include <linux/scatterlist.h>
42 #include <scsi/scsi_ioctl.h>
44 #include <asm/byteorder.h>
45 #include <linux/irq.h>
46 #include <linux/uaccess.h>
47 #include <linux/io.h>
48 #include <asm/unaligned.h>
50 #include "ide-floppy.h"
52 /* module parameters */
53 static unsigned long debug_mask;
54 module_param(debug_mask, ulong, 0644);
56 /* define to see debug info */
57 #define IDEFLOPPY_DEBUG_LOG 0
59 #if IDEFLOPPY_DEBUG_LOG
60 #define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
61 #else
62 #define ide_debug_log(lvl, fmt, args...) do {} while (0)
63 #endif
66 * After each failed packet command we issue a request sense command and retry
67 * the packet command IDEFLOPPY_MAX_PC_RETRIES times.
69 #define IDEFLOPPY_MAX_PC_RETRIES 3
71 /* format capacities descriptor codes */
72 #define CAPACITY_INVALID 0x00
73 #define CAPACITY_UNFORMATTED 0x01
74 #define CAPACITY_CURRENT 0x02
75 #define CAPACITY_NO_CARTRIDGE 0x03
78 * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit
79 * was apparently being deasserted before the unit was ready to receive data.
81 #define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */
83 /* Error code returned in rq->errors to the higher part of the driver. */
84 #define IDEFLOPPY_ERROR_GENERAL 101
86 static DEFINE_MUTEX(idefloppy_ref_mutex);
88 static void idefloppy_cleanup_obj(struct kref *);
90 static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
92 struct ide_floppy_obj *floppy = NULL;
94 mutex_lock(&idefloppy_ref_mutex);
95 floppy = ide_drv_g(disk, ide_floppy_obj);
96 if (floppy) {
97 if (ide_device_get(floppy->drive))
98 floppy = NULL;
99 else
100 kref_get(&floppy->kref);
102 mutex_unlock(&idefloppy_ref_mutex);
103 return floppy;
106 static void ide_floppy_put(struct ide_floppy_obj *floppy)
108 ide_drive_t *drive = floppy->drive;
110 mutex_lock(&idefloppy_ref_mutex);
111 kref_put(&floppy->kref, idefloppy_cleanup_obj);
112 ide_device_put(drive);
113 mutex_unlock(&idefloppy_ref_mutex);
117 * Used to finish servicing a request. For read/write requests, we will call
118 * ide_end_request to pass to the next buffer.
120 static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
122 idefloppy_floppy_t *floppy = drive->driver_data;
123 struct request *rq = HWGROUP(drive)->rq;
124 int error;
126 ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
128 switch (uptodate) {
129 case 0:
130 error = IDEFLOPPY_ERROR_GENERAL;
131 break;
133 case 1:
134 error = 0;
135 break;
137 default:
138 error = uptodate;
141 if (error)
142 floppy->failed_pc = NULL;
143 /* Why does this happen? */
144 if (!rq)
145 return 0;
146 if (!blk_special_request(rq)) {
147 /* our real local end request function */
148 ide_end_request(drive, uptodate, nsecs);
149 return 0;
151 rq->errors = error;
152 /* fixme: need to move this local also */
153 ide_end_drive_cmd(drive, 0, 0);
154 return 0;
157 static void idefloppy_update_buffers(ide_drive_t *drive,
158 struct ide_atapi_pc *pc)
160 struct request *rq = pc->rq;
161 struct bio *bio = rq->bio;
163 while ((bio = rq->bio) != NULL)
164 idefloppy_end_request(drive, 1, 0);
167 static void ide_floppy_callback(ide_drive_t *drive, int dsc)
169 idefloppy_floppy_t *floppy = drive->driver_data;
170 struct ide_atapi_pc *pc = drive->pc;
171 int uptodate = pc->error ? 0 : 1;
173 ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
175 if (floppy->failed_pc == pc)
176 floppy->failed_pc = NULL;
178 if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 ||
179 (pc->rq && blk_pc_request(pc->rq)))
180 uptodate = 1; /* FIXME */
181 else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
182 u8 *buf = pc->buf;
184 if (!pc->error) {
185 floppy->sense_key = buf[2] & 0x0F;
186 floppy->asc = buf[12];
187 floppy->ascq = buf[13];
188 floppy->progress_indication = buf[15] & 0x80 ?
189 (u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
191 if (floppy->failed_pc)
192 ide_debug_log(IDE_DBG_PC, "pc = %x, ",
193 floppy->failed_pc->c[0]);
195 ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x,"
196 "ascq = %x\n", floppy->sense_key,
197 floppy->asc, floppy->ascq);
198 } else
199 printk(KERN_ERR PFX "Error in REQUEST SENSE itself - "
200 "Aborting request!\n");
203 idefloppy_end_request(drive, uptodate, 0);
206 static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
207 struct ide_atapi_pc *pc)
209 /* supress error messages resulting from Medium not present */
210 if (floppy->sense_key == 0x02 &&
211 floppy->asc == 0x3a &&
212 floppy->ascq == 0x00)
213 return;
215 printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, "
216 "asc = %2x, ascq = %2x\n",
217 floppy->drive->name, pc->c[0], floppy->sense_key,
218 floppy->asc, floppy->ascq);
222 static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
223 struct ide_atapi_pc *pc)
225 idefloppy_floppy_t *floppy = drive->driver_data;
227 if (floppy->failed_pc == NULL &&
228 pc->c[0] != GPCMD_REQUEST_SENSE)
229 floppy->failed_pc = pc;
231 /* Set the current packet command */
232 drive->pc = pc;
234 if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
235 if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
236 ide_floppy_report_error(floppy, pc);
237 /* Giving up */
238 pc->error = IDEFLOPPY_ERROR_GENERAL;
240 floppy->failed_pc = NULL;
241 drive->pc_callback(drive, 0);
242 return ide_stopped;
245 ide_debug_log(IDE_DBG_FUNC, "%s: Retry #%d\n", __func__, pc->retries);
247 pc->retries++;
249 return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
252 void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
254 ide_init_pc(pc);
255 pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
256 pc->c[7] = 255;
257 pc->c[8] = 255;
258 pc->req_xfer = 255;
261 /* A mode sense command is used to "sense" floppy parameters. */
262 void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
264 u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
266 ide_init_pc(pc);
267 pc->c[0] = GPCMD_MODE_SENSE_10;
268 pc->c[1] = 0;
269 pc->c[2] = page_code;
271 switch (page_code) {
272 case IDEFLOPPY_CAPABILITIES_PAGE:
273 length += 12;
274 break;
275 case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
276 length += 32;
277 break;
278 default:
279 printk(KERN_ERR PFX "unsupported page code in %s\n", __func__);
281 put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
282 pc->req_xfer = length;
285 static void idefloppy_create_rw_cmd(ide_drive_t *drive,
286 struct ide_atapi_pc *pc, struct request *rq,
287 unsigned long sector)
289 idefloppy_floppy_t *floppy = drive->driver_data;
290 int block = sector / floppy->bs_factor;
291 int blocks = rq->nr_sectors / floppy->bs_factor;
292 int cmd = rq_data_dir(rq);
294 ide_debug_log(IDE_DBG_FUNC, "%s: block: %d, blocks: %d\n", __func__,
295 block, blocks);
297 ide_init_pc(pc);
298 pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
299 put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
300 put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
302 memcpy(rq->cmd, pc->c, 12);
304 pc->rq = rq;
305 pc->b_count = 0;
306 if (rq->cmd_flags & REQ_RW)
307 pc->flags |= PC_FLAG_WRITING;
308 pc->buf = NULL;
309 pc->req_xfer = pc->buf_size = blocks * floppy->block_size;
310 pc->flags |= PC_FLAG_DMA_OK;
313 static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
314 struct ide_atapi_pc *pc, struct request *rq)
316 ide_init_pc(pc);
317 memcpy(pc->c, rq->cmd, sizeof(pc->c));
318 pc->rq = rq;
319 pc->b_count = 0;
320 if (rq->data_len && rq_data_dir(rq) == WRITE)
321 pc->flags |= PC_FLAG_WRITING;
322 pc->buf = rq->data;
323 if (rq->bio)
324 pc->flags |= PC_FLAG_DMA_OK;
326 * possibly problematic, doesn't look like ide-floppy correctly
327 * handled scattered requests if dma fails...
329 pc->req_xfer = pc->buf_size = rq->data_len;
332 static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
333 struct request *rq, sector_t block_s)
335 idefloppy_floppy_t *floppy = drive->driver_data;
336 ide_hwif_t *hwif = drive->hwif;
337 struct ide_atapi_pc *pc;
338 unsigned long block = (unsigned long)block_s;
340 ide_debug_log(IDE_DBG_FUNC, "%s: dev: %s, cmd: 0x%x, cmd_type: %x, "
341 "errors: %d\n",
342 __func__, rq->rq_disk ? rq->rq_disk->disk_name : "?",
343 rq->cmd[0], rq->cmd_type, rq->errors);
345 ide_debug_log(IDE_DBG_FUNC, "%s: sector: %ld, nr_sectors: %ld, "
346 "current_nr_sectors: %d\n",
347 __func__, (long)rq->sector, rq->nr_sectors,
348 rq->current_nr_sectors);
350 if (rq->errors >= ERROR_MAX) {
351 if (floppy->failed_pc)
352 ide_floppy_report_error(floppy, floppy->failed_pc);
353 else
354 printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
356 idefloppy_end_request(drive, 0, 0);
357 return ide_stopped;
359 if (blk_fs_request(rq)) {
360 if (((long)rq->sector % floppy->bs_factor) ||
361 (rq->nr_sectors % floppy->bs_factor)) {
362 printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
363 drive->name);
364 idefloppy_end_request(drive, 0, 0);
365 return ide_stopped;
367 pc = &floppy->queued_pc;
368 idefloppy_create_rw_cmd(drive, pc, rq, block);
369 } else if (blk_special_request(rq)) {
370 pc = (struct ide_atapi_pc *) rq->buffer;
371 } else if (blk_pc_request(rq)) {
372 pc = &floppy->queued_pc;
373 idefloppy_blockpc_cmd(floppy, pc, rq);
374 } else {
375 blk_dump_rq_flags(rq, PFX "unsupported command in queue");
376 idefloppy_end_request(drive, 0, 0);
377 return ide_stopped;
380 ide_init_sg_cmd(drive, rq);
381 ide_map_sg(drive, rq);
383 pc->sg = hwif->sg_table;
384 pc->sg_cnt = hwif->sg_nents;
386 pc->rq = rq;
388 return idefloppy_issue_pc(drive, pc);
392 * Look at the flexible disk page parameters. We ignore the CHS capacity
393 * parameters and use the LBA parameters instead.
395 static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
397 idefloppy_floppy_t *floppy = drive->driver_data;
398 struct gendisk *disk = floppy->disk;
399 struct ide_atapi_pc pc;
400 u8 *page;
401 int capacity, lba_capacity;
402 u16 transfer_rate, sector_size, cyls, rpm;
403 u8 heads, sectors;
405 ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
407 if (ide_queue_pc_tail(drive, disk, &pc)) {
408 printk(KERN_ERR PFX "Can't get flexible disk page params\n");
409 return 1;
412 if (pc.buf[3] & 0x80)
413 drive->atapi_flags |= IDE_AFLAG_WP;
414 else
415 drive->atapi_flags &= ~IDE_AFLAG_WP;
417 set_disk_ro(disk, !!(drive->atapi_flags & IDE_AFLAG_WP));
419 page = &pc.buf[8];
421 transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]);
422 sector_size = be16_to_cpup((__be16 *)&pc.buf[8 + 6]);
423 cyls = be16_to_cpup((__be16 *)&pc.buf[8 + 8]);
424 rpm = be16_to_cpup((__be16 *)&pc.buf[8 + 28]);
425 heads = pc.buf[8 + 4];
426 sectors = pc.buf[8 + 5];
428 capacity = cyls * heads * sectors * sector_size;
430 if (memcmp(page, &floppy->flexible_disk_page, 32))
431 printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, "
432 "%d sector size, %d rpm\n",
433 drive->name, capacity / 1024, cyls, heads,
434 sectors, transfer_rate / 8, sector_size, rpm);
436 memcpy(&floppy->flexible_disk_page, page, 32);
437 drive->bios_cyl = cyls;
438 drive->bios_head = heads;
439 drive->bios_sect = sectors;
440 lba_capacity = floppy->blocks * floppy->block_size;
442 if (capacity < lba_capacity) {
443 printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d "
444 "bytes, but the drive only handles %d\n",
445 drive->name, lba_capacity, capacity);
446 floppy->blocks = floppy->block_size ?
447 capacity / floppy->block_size : 0;
449 return 0;
453 * Determine if a media is present in the floppy drive, and if so, its LBA
454 * capacity.
456 static int ide_floppy_get_capacity(ide_drive_t *drive)
458 idefloppy_floppy_t *floppy = drive->driver_data;
459 struct gendisk *disk = floppy->disk;
460 struct ide_atapi_pc pc;
461 u8 *cap_desc;
462 u8 header_len, desc_cnt;
463 int i, rc = 1, blocks, length;
465 drive->bios_cyl = 0;
466 drive->bios_head = drive->bios_sect = 0;
467 floppy->blocks = 0;
468 floppy->bs_factor = 1;
469 set_capacity(floppy->disk, 0);
471 ide_floppy_create_read_capacity_cmd(&pc);
472 if (ide_queue_pc_tail(drive, disk, &pc)) {
473 printk(KERN_ERR PFX "Can't get floppy parameters\n");
474 return 1;
476 header_len = pc.buf[3];
477 cap_desc = &pc.buf[4];
478 desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
480 for (i = 0; i < desc_cnt; i++) {
481 unsigned int desc_start = 4 + i*8;
483 blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
484 length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
486 ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, "
487 "%d sector size\n",
488 i, blocks * length / 1024, blocks, length);
490 if (i)
491 continue;
493 * the code below is valid only for the 1st descriptor, ie i=0
496 switch (pc.buf[desc_start + 4] & 0x03) {
497 /* Clik! drive returns this instead of CAPACITY_CURRENT */
498 case CAPACITY_UNFORMATTED:
499 if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
501 * If it is not a clik drive, break out
502 * (maintains previous driver behaviour)
504 break;
505 case CAPACITY_CURRENT:
506 /* Normal Zip/LS-120 disks */
507 if (memcmp(cap_desc, &floppy->cap_desc, 8))
508 printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d "
509 "sector size\n",
510 drive->name, blocks * length / 1024,
511 blocks, length);
512 memcpy(&floppy->cap_desc, cap_desc, 8);
514 if (!length || length % 512) {
515 printk(KERN_NOTICE PFX "%s: %d bytes block size"
516 " not supported\n", drive->name, length);
517 } else {
518 floppy->blocks = blocks;
519 floppy->block_size = length;
520 floppy->bs_factor = length / 512;
521 if (floppy->bs_factor != 1)
522 printk(KERN_NOTICE PFX "%s: Warning: "
523 "non 512 bytes block size not "
524 "fully supported\n",
525 drive->name);
526 rc = 0;
528 break;
529 case CAPACITY_NO_CARTRIDGE:
531 * This is a KERN_ERR so it appears on screen
532 * for the user to see
534 printk(KERN_ERR PFX "%s: No disk in drive\n",
535 drive->name);
536 break;
537 case CAPACITY_INVALID:
538 printk(KERN_ERR PFX "%s: Invalid capacity for disk "
539 "in drive\n", drive->name);
540 break;
542 ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d\n",
543 pc.buf[desc_start + 4] & 0x03);
546 /* Clik! disk does not support get_flexible_disk_page */
547 if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
548 (void) ide_floppy_get_flexible_disk_page(drive);
550 set_capacity(disk, floppy->blocks * floppy->bs_factor);
552 return rc;
555 static sector_t idefloppy_capacity(ide_drive_t *drive)
557 idefloppy_floppy_t *floppy = drive->driver_data;
558 unsigned long capacity = floppy->blocks * floppy->bs_factor;
560 return capacity;
563 #ifdef CONFIG_IDE_PROC_FS
564 ide_devset_rw_field(bios_cyl, bios_cyl);
565 ide_devset_rw_field(bios_head, bios_head);
566 ide_devset_rw_field(bios_sect, bios_sect);
567 ide_devset_rw_field(ticks, pc_delay);
569 static const struct ide_proc_devset idefloppy_settings[] = {
570 IDE_PROC_DEVSET(bios_cyl, 0, 1023),
571 IDE_PROC_DEVSET(bios_head, 0, 255),
572 IDE_PROC_DEVSET(bios_sect, 0, 63),
573 IDE_PROC_DEVSET(ticks, 0, 255),
574 { 0 },
576 #endif
578 static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
580 u16 *id = drive->id;
581 u8 gcw[2];
583 *((u16 *)&gcw) = id[ATA_ID_CONFIG];
585 drive->pc_callback = ide_floppy_callback;
586 drive->pc_update_buffers = idefloppy_update_buffers;
587 drive->pc_io_buffers = ide_io_buffers;
589 if (((gcw[0] & 0x60) >> 5) == 1)
590 drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
592 * We used to check revisions here. At this point however I'm giving up.
593 * Just assume they are all broken, its easier.
595 * The actual reason for the workarounds was likely a driver bug after
596 * all rather than a firmware bug, and the workaround below used to hide
597 * it. It should be fixed as of version 1.9, but to be on the safe side
598 * we'll leave the limitation below for the 2.2.x tree.
600 if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) {
601 drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
602 /* This value will be visible in the /proc/ide/hdx/settings */
603 drive->pc_delay = IDEFLOPPY_PC_DELAY;
604 blk_queue_max_sectors(drive->queue, 64);
608 * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes
609 * nasty clicking noises without it, so please don't remove this.
611 if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) {
612 blk_queue_max_sectors(drive->queue, 64);
613 drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE;
614 /* IOMEGA Clik! drives do not support lock/unlock commands */
615 drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
618 (void) ide_floppy_get_capacity(drive);
620 ide_proc_register_driver(drive, floppy->driver);
623 static void ide_floppy_remove(ide_drive_t *drive)
625 idefloppy_floppy_t *floppy = drive->driver_data;
626 struct gendisk *g = floppy->disk;
628 ide_proc_unregister_driver(drive, floppy->driver);
630 del_gendisk(g);
632 ide_floppy_put(floppy);
635 static void idefloppy_cleanup_obj(struct kref *kref)
637 struct ide_floppy_obj *floppy = to_ide_drv(kref, ide_floppy_obj);
638 ide_drive_t *drive = floppy->drive;
639 struct gendisk *g = floppy->disk;
641 drive->driver_data = NULL;
642 g->private_data = NULL;
643 put_disk(g);
644 kfree(floppy);
647 #ifdef CONFIG_IDE_PROC_FS
648 static int proc_idefloppy_read_capacity(char *page, char **start, off_t off,
649 int count, int *eof, void *data)
651 ide_drive_t*drive = (ide_drive_t *)data;
652 int len;
654 len = sprintf(page, "%llu\n", (long long)idefloppy_capacity(drive));
655 PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
658 static ide_proc_entry_t idefloppy_proc[] = {
659 { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL },
660 { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
661 { NULL, 0, NULL, NULL }
663 #endif /* CONFIG_IDE_PROC_FS */
665 static int ide_floppy_probe(ide_drive_t *);
667 static ide_driver_t idefloppy_driver = {
668 .gen_driver = {
669 .owner = THIS_MODULE,
670 .name = "ide-floppy",
671 .bus = &ide_bus_type,
673 .probe = ide_floppy_probe,
674 .remove = ide_floppy_remove,
675 .version = IDEFLOPPY_VERSION,
676 .media = ide_floppy,
677 .do_request = idefloppy_do_request,
678 .end_request = idefloppy_end_request,
679 .error = __ide_error,
680 #ifdef CONFIG_IDE_PROC_FS
681 .proc = idefloppy_proc,
682 .settings = idefloppy_settings,
683 #endif
686 static int idefloppy_open(struct inode *inode, struct file *filp)
688 struct gendisk *disk = inode->i_bdev->bd_disk;
689 struct ide_floppy_obj *floppy;
690 ide_drive_t *drive;
691 int ret = 0;
693 floppy = ide_floppy_get(disk);
694 if (!floppy)
695 return -ENXIO;
697 drive = floppy->drive;
699 ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
701 floppy->openers++;
703 if (floppy->openers == 1) {
704 drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
705 /* Just in case */
707 if (ide_do_test_unit_ready(drive, disk))
708 ide_do_start_stop(drive, disk, 1);
710 if (ide_floppy_get_capacity(drive)
711 && (filp->f_flags & O_NDELAY) == 0
713 * Allow O_NDELAY to open a drive without a disk, or with an
714 * unreadable disk, so that we can get the format capacity
715 * of the drive or begin the format - Sam
718 ret = -EIO;
719 goto out_put_floppy;
722 if ((drive->atapi_flags & IDE_AFLAG_WP) && (filp->f_mode & 2)) {
723 ret = -EROFS;
724 goto out_put_floppy;
727 drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED;
728 ide_set_media_lock(drive, disk, 1);
729 check_disk_change(inode->i_bdev);
730 } else if (drive->atapi_flags & IDE_AFLAG_FORMAT_IN_PROGRESS) {
731 ret = -EBUSY;
732 goto out_put_floppy;
734 return 0;
736 out_put_floppy:
737 floppy->openers--;
738 ide_floppy_put(floppy);
739 return ret;
742 static int idefloppy_release(struct inode *inode, struct file *filp)
744 struct gendisk *disk = inode->i_bdev->bd_disk;
745 struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
746 ide_drive_t *drive = floppy->drive;
748 ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
750 if (floppy->openers == 1) {
751 ide_set_media_lock(drive, disk, 0);
752 drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
755 floppy->openers--;
757 ide_floppy_put(floppy);
759 return 0;
762 static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo)
764 struct ide_floppy_obj *floppy = ide_drv_g(bdev->bd_disk,
765 ide_floppy_obj);
766 ide_drive_t *drive = floppy->drive;
768 geo->heads = drive->bios_head;
769 geo->sectors = drive->bios_sect;
770 geo->cylinders = (u16)drive->bios_cyl; /* truncate */
771 return 0;
774 static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
775 unsigned long arg, unsigned int cmd)
777 idefloppy_floppy_t *floppy = drive->driver_data;
778 struct gendisk *disk = floppy->disk;
779 int prevent = (arg && cmd != CDROMEJECT) ? 1 : 0;
781 if (floppy->openers > 1)
782 return -EBUSY;
784 ide_set_media_lock(drive, disk, prevent);
786 if (cmd == CDROMEJECT)
787 ide_do_start_stop(drive, disk, 2);
789 return 0;
792 static int idefloppy_ioctl(struct inode *inode, struct file *file,
793 unsigned int cmd, unsigned long arg)
795 struct block_device *bdev = inode->i_bdev;
796 struct ide_floppy_obj *floppy = ide_drv_g(bdev->bd_disk,
797 ide_floppy_obj);
798 ide_drive_t *drive = floppy->drive;
799 struct ide_atapi_pc pc;
800 void __user *argp = (void __user *)arg;
801 int err;
803 if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
804 return ide_floppy_lockdoor(drive, &pc, arg, cmd);
806 err = ide_floppy_format_ioctl(drive, file, cmd, argp);
807 if (err != -ENOTTY)
808 return err;
811 * skip SCSI_IOCTL_SEND_COMMAND (deprecated)
812 * and CDROM_SEND_PACKET (legacy) ioctls
814 if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
815 err = scsi_cmd_ioctl(file, bdev->bd_disk->queue,
816 bdev->bd_disk, cmd, argp);
818 if (err == -ENOTTY)
819 err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
821 return err;
824 static int idefloppy_media_changed(struct gendisk *disk)
826 struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
827 ide_drive_t *drive = floppy->drive;
828 int ret;
830 /* do not scan partitions twice if this is a removable device */
831 if (drive->attach) {
832 drive->attach = 0;
833 return 0;
835 ret = !!(drive->atapi_flags & IDE_AFLAG_MEDIA_CHANGED);
836 drive->atapi_flags &= ~IDE_AFLAG_MEDIA_CHANGED;
837 return ret;
840 static int idefloppy_revalidate_disk(struct gendisk *disk)
842 struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
843 set_capacity(disk, idefloppy_capacity(floppy->drive));
844 return 0;
847 static struct block_device_operations idefloppy_ops = {
848 .owner = THIS_MODULE,
849 .open = idefloppy_open,
850 .release = idefloppy_release,
851 .ioctl = idefloppy_ioctl,
852 .getgeo = idefloppy_getgeo,
853 .media_changed = idefloppy_media_changed,
854 .revalidate_disk = idefloppy_revalidate_disk
857 static int ide_floppy_probe(ide_drive_t *drive)
859 idefloppy_floppy_t *floppy;
860 struct gendisk *g;
862 if (!strstr("ide-floppy", drive->driver_req))
863 goto failed;
865 if (drive->media != ide_floppy)
866 goto failed;
868 if (!ide_check_atapi_device(drive, DRV_NAME)) {
869 printk(KERN_ERR PFX "%s: not supported by this version of "
870 DRV_NAME "\n", drive->name);
871 goto failed;
873 floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL);
874 if (!floppy) {
875 printk(KERN_ERR PFX "%s: Can't allocate a floppy structure\n",
876 drive->name);
877 goto failed;
880 g = alloc_disk(1 << PARTN_BITS);
881 if (!g)
882 goto out_free_floppy;
884 ide_init_disk(g, drive);
886 kref_init(&floppy->kref);
888 floppy->drive = drive;
889 floppy->driver = &idefloppy_driver;
890 floppy->disk = g;
892 g->private_data = &floppy->driver;
894 drive->driver_data = floppy;
896 drive->debug_mask = debug_mask;
898 idefloppy_setup(drive, floppy);
900 g->minors = 1 << PARTN_BITS;
901 g->driverfs_dev = &drive->gendev;
902 g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0;
903 g->fops = &idefloppy_ops;
904 drive->attach = 1;
905 add_disk(g);
906 return 0;
908 out_free_floppy:
909 kfree(floppy);
910 failed:
911 return -ENODEV;
914 static void __exit idefloppy_exit(void)
916 driver_unregister(&idefloppy_driver.gen_driver);
919 static int __init idefloppy_init(void)
921 printk(KERN_INFO DRV_NAME " driver " IDEFLOPPY_VERSION "\n");
922 return driver_register(&idefloppy_driver.gen_driver);
925 MODULE_ALIAS("ide:*m-floppy*");
926 MODULE_ALIAS("ide-floppy");
927 module_init(idefloppy_init);
928 module_exit(idefloppy_exit);
929 MODULE_LICENSE("GPL");
930 MODULE_DESCRIPTION("ATAPI FLOPPY Driver");