?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
r8169: remove erroneous processing of always set bit.
[linux-2.6.git] / drivers / tty / serial / imx.c
blob7e91b3d368cd1ddc26e07e5a6de42b6b94752121
1 /*
2 * Driver for Motorola IMX serial ports
3 *
4 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
5 *
6 * Author: Sascha Hauer <sascha@saschahauer.de>
7 * Copyright (C) 2004 Pengutronix
8 *
9 * Copyright (C) 2009 emlix GmbH
10 * Author: Fabian Godehardt (added IrDA support for iMX)
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25 *
26 * [29-Mar-2005] Mike Lee
27 * Added hardware handshake
28 */
29
30 #if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
31 #define SUPPORT_SYSRQ
32 #endif
33
34 #include <linux/module.h>
35 #include <linux/ioport.h>
36 #include <linux/init.h>
37 #include <linux/console.h>
38 #include <linux/sysrq.h>
39 #include <linux/platform_device.h>
40 #include <linux/tty.h>
41 #include <linux/tty_flip.h>
42 #include <linux/serial_core.h>
43 #include <linux/serial.h>
44 #include <linux/clk.h>
45 #include <linux/delay.h>
46 #include <linux/rational.h>
47 #include <linux/slab.h>
48 #include <linux/of.h>
49 #include <linux/of_device.h>
50
51 #include <asm/io.h>
52 #include <asm/irq.h>
53 #include <mach/imx-uart.h>
54
55 /* Register definitions */
56 #define URXD0 0x0 /* Receiver Register */
57 #define URTX0 0x40 /* Transmitter Register */
58 #define UCR1 0x80 /* Control Register 1 */
59 #define UCR2 0x84 /* Control Register 2 */
60 #define UCR3 0x88 /* Control Register 3 */
61 #define UCR4 0x8c /* Control Register 4 */
62 #define UFCR 0x90 /* FIFO Control Register */
63 #define USR1 0x94 /* Status Register 1 */
64 #define USR2 0x98 /* Status Register 2 */
65 #define UESC 0x9c /* Escape Character Register */
66 #define UTIM 0xa0 /* Escape Timer Register */
67 #define UBIR 0xa4 /* BRM Incremental Register */
68 #define UBMR 0xa8 /* BRM Modulator Register */
69 #define UBRC 0xac /* Baud Rate Count Register */
70 #define IMX21_ONEMS 0xb0 /* One Millisecond register */
71 #define IMX1_UTS 0xd0 /* UART Test Register on i.mx1 */
72 #define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/
73
74 /* UART Control Register Bit Fields.*/
75 #define URXD_CHARRDY (1<<15)
76 #define URXD_ERR (1<<14)
77 #define URXD_OVRRUN (1<<13)
78 #define URXD_FRMERR (1<<12)
79 #define URXD_BRK (1<<11)
80 #define URXD_PRERR (1<<10)
81 #define UCR1_ADEN (1<<15) /* Auto detect interrupt */
82 #define UCR1_ADBR (1<<14) /* Auto detect baud rate */
83 #define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
84 #define UCR1_IDEN (1<<12) /* Idle condition interrupt */
85 #define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
86 #define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
87 #define UCR1_IREN (1<<7) /* Infrared interface enable */
88 #define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
89 #define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
90 #define UCR1_SNDBRK (1<<4) /* Send break */
91 #define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
92 #define IMX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, i.mx1 only */
93 #define UCR1_DOZE (1<<1) /* Doze */
94 #define UCR1_UARTEN (1<<0) /* UART enabled */
95 #define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
96 #define UCR2_IRTS (1<<14) /* Ignore RTS pin */
97 #define UCR2_CTSC (1<<13) /* CTS pin control */
98 #define UCR2_CTS (1<<12) /* Clear to send */
99 #define UCR2_ESCEN (1<<11) /* Escape enable */
100 #define UCR2_PREN (1<<8) /* Parity enable */
101 #define UCR2_PROE (1<<7) /* Parity odd/even */
102 #define UCR2_STPB (1<<6) /* Stop */
103 #define UCR2_WS (1<<5) /* Word size */
104 #define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
105 #define UCR2_TXEN (1<<2) /* Transmitter enabled */
106 #define UCR2_RXEN (1<<1) /* Receiver enabled */
107 #define UCR2_SRST (1<<0) /* SW reset */
108 #define UCR3_DTREN (1<<13) /* DTR interrupt enable */
109 #define UCR3_PARERREN (1<<12) /* Parity enable */
110 #define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
111 #define UCR3_DSR (1<<10) /* Data set ready */
112 #define UCR3_DCD (1<<9) /* Data carrier detect */
113 #define UCR3_RI (1<<8) /* Ring indicator */
114 #define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
115 #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
116 #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
117 #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
118 #define IMX21_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select */
119 #define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
120 #define UCR3_BPEN (1<<0) /* Preset registers enable */
121 #define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */
122 #define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */
123 #define UCR4_INVR (1<<9) /* Inverted infrared reception */
124 #define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
125 #define UCR4_WKEN (1<<7) /* Wake interrupt enable */
126 #define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
127 #define UCR4_IRSC (1<<5) /* IR special case */
128 #define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
129 #define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
130 #define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
131 #define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
132 #define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
133 #define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
134 #define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7)
135 #define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
136 #define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
137 #define USR1_RTSS (1<<14) /* RTS pin status */
138 #define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
139 #define USR1_RTSD (1<<12) /* RTS delta */
140 #define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
141 #define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
142 #define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
143 #define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
144 #define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
145 #define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
146 #define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
147 #define USR2_ADET (1<<15) /* Auto baud rate detect complete */
148 #define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
149 #define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
150 #define USR2_IDLE (1<<12) /* Idle condition */
151 #define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
152 #define USR2_WAKE (1<<7) /* Wake */
153 #define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
154 #define USR2_TXDC (1<<3) /* Transmitter complete */
155 #define USR2_BRCD (1<<2) /* Break condition */
156 #define USR2_ORE (1<<1) /* Overrun error */
157 #define USR2_RDR (1<<0) /* Recv data ready */
158 #define UTS_FRCPERR (1<<13) /* Force parity error */
159 #define UTS_LOOP (1<<12) /* Loop tx and rx */
160 #define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
161 #define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
162 #define UTS_TXFULL (1<<4) /* TxFIFO full */
163 #define UTS_RXFULL (1<<3) /* RxFIFO full */
164 #define UTS_SOFTRST (1<<0) /* Software reset */
165
166 /* We've been assigned a range on the "Low-density serial ports" major */
167 #define SERIAL_IMX_MAJOR 207
168 #define MINOR_START 16
169 #define DEV_NAME "ttymxc"
170 #define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS
171
172 /*
173 * This determines how often we check the modem status signals
174 * for any change. They generally aren't connected to an IRQ
175 * so we have to poll them. We also check immediately before
176 * filling the TX fifo incase CTS has been dropped.
177 */
178 #define MCTRL_TIMEOUT (250*HZ/1000)
179
180 #define DRIVER_NAME "IMX-uart"
181
182 #define UART_NR 8
183
184 /* i.mx21 type uart runs on all i.mx except i.mx1 */
185 enum imx_uart_type {
186 IMX1_UART,
187 IMX21_UART,
188 };
189
190 /* device type dependent stuff */
191 struct imx_uart_data {
192 unsigned uts_reg;
193 enum imx_uart_type devtype;
194 };
195
196 struct imx_port {
197 struct uart_port port;
198 struct timer_list timer;
199 unsigned int old_status;
200 int txirq,rxirq,rtsirq;
201 unsigned int have_rtscts:1;
202 unsigned int use_irda:1;
203 unsigned int irda_inv_rx:1;
204 unsigned int irda_inv_tx:1;
205 unsigned short trcv_delay; /* transceiver delay */
206 struct clk *clk;
207 struct imx_uart_data *devdata;
208 };
209
210 #ifdef CONFIG_IRDA
211 #define USE_IRDA(sport) ((sport)->use_irda)
212 #else
213 #define USE_IRDA(sport) (0)
214 #endif
215
216 static struct imx_uart_data imx_uart_devdata[] = {
217 [IMX1_UART] = {
218 .uts_reg = IMX1_UTS,
219 .devtype = IMX1_UART,
220 },
221 [IMX21_UART] = {
222 .uts_reg = IMX21_UTS,
223 .devtype = IMX21_UART,
224 },
225 };
226
227 static struct platform_device_id imx_uart_devtype[] = {
228 {
229 .name = "imx1-uart",
230 .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX1_UART],
231 }, {
232 .name = "imx21-uart",
233 .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX21_UART],
234 }, {
235 /* sentinel */
236 }
237 };
238 MODULE_DEVICE_TABLE(platform, imx_uart_devtype);
239
240 static struct of_device_id imx_uart_dt_ids[] = {
241 { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
242 { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], },
243 { /* sentinel */ }
244 };
245 MODULE_DEVICE_TABLE(of, imx_uart_dt_ids);
246
247 static inline unsigned uts_reg(struct imx_port *sport)
248 {
249 return sport->devdata->uts_reg;
250 }
251
252 static inline int is_imx1_uart(struct imx_port *sport)
253 {
254 return sport->devdata->devtype == IMX1_UART;
255 }
256
257 static inline int is_imx21_uart(struct imx_port *sport)
258 {
259 return sport->devdata->devtype == IMX21_UART;
260 }
261
262 /*
263 * Handle any change of modem status signal since we were last called.
264 */
265 static void imx_mctrl_check(struct imx_port *sport)
266 {
267 unsigned int status, changed;
268
269 status = sport->port.ops->get_mctrl(&sport->port);
270 changed = status ^ sport->old_status;
271
272 if (changed == 0)
273 return;
274
275 sport->old_status = status;
276
277 if (changed & TIOCM_RI)
278 sport->port.icount.rng++;
279 if (changed & TIOCM_DSR)
280 sport->port.icount.dsr++;
281 if (changed & TIOCM_CAR)
282 uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
283 if (changed & TIOCM_CTS)
284 uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
285
286 wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
287 }
288
289 /*
290 * This is our per-port timeout handler, for checking the
291 * modem status signals.
292 */
293 static void imx_timeout(unsigned long data)
294 {
295 struct imx_port *sport = (struct imx_port *)data;
296 unsigned long flags;
297
298 if (sport->port.state) {
299 spin_lock_irqsave(&sport->port.lock, flags);
300 imx_mctrl_check(sport);
301 spin_unlock_irqrestore(&sport->port.lock, flags);
302
303 mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
304 }
305 }
306
307 /*
308 * interrupts disabled on entry
309 */
310 static void imx_stop_tx(struct uart_port *port)
311 {
312 struct imx_port *sport = (struct imx_port *)port;
313 unsigned long temp;
314
315 if (USE_IRDA(sport)) {
316 /* half duplex - wait for end of transmission */
317 int n = 256;
318 while ((--n > 0) &&
319 !(readl(sport->port.membase + USR2) & USR2_TXDC)) {
320 udelay(5);
321 barrier();
322 }
323 /*
324 * irda transceiver - wait a bit more to avoid
325 * cutoff, hardware dependent
326 */
327 udelay(sport->trcv_delay);
328
329 /*
330 * half duplex - reactivate receive mode,
331 * flush receive pipe echo crap
332 */
333 if (readl(sport->port.membase + USR2) & USR2_TXDC) {
334 temp = readl(sport->port.membase + UCR1);
335 temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN);
336 writel(temp, sport->port.membase + UCR1);
337
338 temp = readl(sport->port.membase + UCR4);
339 temp &= ~(UCR4_TCEN);
340 writel(temp, sport->port.membase + UCR4);
341
342 while (readl(sport->port.membase + URXD0) &
343 URXD_CHARRDY)
344 barrier();
345
346 temp = readl(sport->port.membase + UCR1);
347 temp |= UCR1_RRDYEN;
348 writel(temp, sport->port.membase + UCR1);
349
350 temp = readl(sport->port.membase + UCR4);
351 temp |= UCR4_DREN;
352 writel(temp, sport->port.membase + UCR4);
353 }
354 return;
355 }
356
357 temp = readl(sport->port.membase + UCR1);
358 writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1);
359 }
360
361 /*
362 * interrupts disabled on entry
363 */
364 static void imx_stop_rx(struct uart_port *port)
365 {
366 struct imx_port *sport = (struct imx_port *)port;
367 unsigned long temp;
368
369 temp = readl(sport->port.membase + UCR2);
370 writel(temp &~ UCR2_RXEN, sport->port.membase + UCR2);
371 }
372
373 /*
374 * Set the modem control timer to fire immediately.
375 */
376 static void imx_enable_ms(struct uart_port *port)
377 {
378 struct imx_port *sport = (struct imx_port *)port;
379
380 mod_timer(&sport->timer, jiffies);
381 }
382
383 static inline void imx_transmit_buffer(struct imx_port *sport)
384 {
385 struct circ_buf *xmit = &sport->port.state->xmit;
386
387 while (!uart_circ_empty(xmit) &&
388 !(readl(sport->port.membase + uts_reg(sport))
389 & UTS_TXFULL)) {
390 /* send xmit->buf[xmit->tail]
391 * out the port here */
392 writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
393 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
394 sport->port.icount.tx++;
395 }
396
397 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
398 uart_write_wakeup(&sport->port);
399
400 if (uart_circ_empty(xmit))
401 imx_stop_tx(&sport->port);
402 }
403
404 /*
405 * interrupts disabled on entry
406 */
407 static void imx_start_tx(struct uart_port *port)
408 {
409 struct imx_port *sport = (struct imx_port *)port;
410 unsigned long temp;
411
412 if (USE_IRDA(sport)) {
413 /* half duplex in IrDA mode; have to disable receive mode */
414 temp = readl(sport->port.membase + UCR4);
415 temp &= ~(UCR4_DREN);
416 writel(temp, sport->port.membase + UCR4);
417
418 temp = readl(sport->port.membase + UCR1);
419 temp &= ~(UCR1_RRDYEN);
420 writel(temp, sport->port.membase + UCR1);
421 }
422
423 temp = readl(sport->port.membase + UCR1);
424 writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
425
426 if (USE_IRDA(sport)) {
427 temp = readl(sport->port.membase + UCR1);
428 temp |= UCR1_TRDYEN;
429 writel(temp, sport->port.membase + UCR1);
430
431 temp = readl(sport->port.membase + UCR4);
432 temp |= UCR4_TCEN;
433 writel(temp, sport->port.membase + UCR4);
434 }
435
436 if (readl(sport->port.membase + uts_reg(sport)) & UTS_TXEMPTY)
437 imx_transmit_buffer(sport);
438 }
439
440 static irqreturn_t imx_rtsint(int irq, void *dev_id)
441 {
442 struct imx_port *sport = dev_id;
443 unsigned int val;
444 unsigned long flags;
445
446 spin_lock_irqsave(&sport->port.lock, flags);
447
448 writel(USR1_RTSD, sport->port.membase + USR1);
449 val = readl(sport->port.membase + USR1) & USR1_RTSS;
450 uart_handle_cts_change(&sport->port, !!val);
451 wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
452
453 spin_unlock_irqrestore(&sport->port.lock, flags);
454 return IRQ_HANDLED;
455 }
456
457 static irqreturn_t imx_txint(int irq, void *dev_id)
458 {
459 struct imx_port *sport = dev_id;
460 struct circ_buf *xmit = &sport->port.state->xmit;
461 unsigned long flags;
462
463 spin_lock_irqsave(&sport->port.lock,flags);
464 if (sport->port.x_char)
465 {
466 /* Send next char */
467 writel(sport->port.x_char, sport->port.membase + URTX0);
468 goto out;
469 }
470
471 if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
472 imx_stop_tx(&sport->port);
473 goto out;
474 }
475
476 imx_transmit_buffer(sport);
477
478 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
479 uart_write_wakeup(&sport->port);
480
481 out:
482 spin_unlock_irqrestore(&sport->port.lock,flags);
483 return IRQ_HANDLED;
484 }
485
486 static irqreturn_t imx_rxint(int irq, void *dev_id)
487 {
488 struct imx_port *sport = dev_id;
489 unsigned int rx,flg,ignored = 0;
490 struct tty_struct *tty = sport->port.state->port.tty;
491 unsigned long flags, temp;
492
493 spin_lock_irqsave(&sport->port.lock,flags);
494
495 while (readl(sport->port.membase + USR2) & USR2_RDR) {
496 flg = TTY_NORMAL;
497 sport->port.icount.rx++;
498
499 rx = readl(sport->port.membase + URXD0);
500
501 temp = readl(sport->port.membase + USR2);
502 if (temp & USR2_BRCD) {
503 writel(USR2_BRCD, sport->port.membase + USR2);
504 if (uart_handle_break(&sport->port))
505 continue;
506 }
507
508 if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
509 continue;
510
511 if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) {
512 if (rx & URXD_PRERR)
513 sport->port.icount.parity++;
514 else if (rx & URXD_FRMERR)
515 sport->port.icount.frame++;
516 if (rx & URXD_OVRRUN)
517 sport->port.icount.overrun++;
518
519 if (rx & sport->port.ignore_status_mask) {
520 if (++ignored > 100)
521 goto out;
522 continue;
523 }
524
525 rx &= sport->port.read_status_mask;
526
527 if (rx & URXD_PRERR)
528 flg = TTY_PARITY;
529 else if (rx & URXD_FRMERR)
530 flg = TTY_FRAME;
531 if (rx & URXD_OVRRUN)
532 flg = TTY_OVERRUN;
533
534 #ifdef SUPPORT_SYSRQ
535 sport->port.sysrq = 0;
536 #endif
537 }
538
539 tty_insert_flip_char(tty, rx, flg);
540 }
541
542 out:
543 spin_unlock_irqrestore(&sport->port.lock,flags);
544 tty_flip_buffer_push(tty);
545 return IRQ_HANDLED;
546 }
547
548 static irqreturn_t imx_int(int irq, void *dev_id)
549 {
550 struct imx_port *sport = dev_id;
551 unsigned int sts;
552
553 sts = readl(sport->port.membase + USR1);
554
555 if (sts & USR1_RRDY)
556 imx_rxint(irq, dev_id);
557
558 if (sts & USR1_TRDY &&
559 readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
560 imx_txint(irq, dev_id);
561
562 if (sts & USR1_RTSD)
563 imx_rtsint(irq, dev_id);
564
565 return IRQ_HANDLED;
566 }
567
568 /*
569 * Return TIOCSER_TEMT when transmitter is not busy.
570 */
571 static unsigned int imx_tx_empty(struct uart_port *port)
572 {
573 struct imx_port *sport = (struct imx_port *)port;
574
575 return (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0;
576 }
577
578 /*
579 * We have a modem side uart, so the meanings of RTS and CTS are inverted.
580 */
581 static unsigned int imx_get_mctrl(struct uart_port *port)
582 {
583 struct imx_port *sport = (struct imx_port *)port;
584 unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
585
586 if (readl(sport->port.membase + USR1) & USR1_RTSS)
587 tmp |= TIOCM_CTS;
588
589 if (readl(sport->port.membase + UCR2) & UCR2_CTS)
590 tmp |= TIOCM_RTS;
591
592 return tmp;
593 }
594
595 static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
596 {
597 struct imx_port *sport = (struct imx_port *)port;
598 unsigned long temp;
599
600 temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS;
601
602 if (mctrl & TIOCM_RTS)
603 temp |= UCR2_CTS;
604
605 writel(temp, sport->port.membase + UCR2);
606 }
607
608 /*
609 * Interrupts always disabled.
610 */
611 static void imx_break_ctl(struct uart_port *port, int break_state)
612 {
613 struct imx_port *sport = (struct imx_port *)port;
614 unsigned long flags, temp;
615
616 spin_lock_irqsave(&sport->port.lock, flags);
617
618 temp = readl(sport->port.membase + UCR1) & ~UCR1_SNDBRK;
619
620 if ( break_state != 0 )
621 temp |= UCR1_SNDBRK;
622
623 writel(temp, sport->port.membase + UCR1);
624
625 spin_unlock_irqrestore(&sport->port.lock, flags);
626 }
627
628 #define TXTL 2 /* reset default */
629 #define RXTL 1 /* reset default */
630
631 static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
632 {
633 unsigned int val;
634 unsigned int ufcr_rfdiv;
635
636 /* set receiver / transmitter trigger level.
637 * RFDIV is set such way to satisfy requested uartclk value
638 */
639 val = TXTL << 10 | RXTL;
640 ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2)
641 / sport->port.uartclk;
642
643 if(!ufcr_rfdiv)
644 ufcr_rfdiv = 1;
645
646 val |= UFCR_RFDIV_REG(ufcr_rfdiv);
647
648 writel(val, sport->port.membase + UFCR);
649
650 return 0;
651 }
652
653 /* half the RX buffer size */
654 #define CTSTL 16
655
656 static int imx_startup(struct uart_port *port)
657 {
658 struct imx_port *sport = (struct imx_port *)port;
659 int retval;
660 unsigned long flags, temp;
661
662 imx_setup_ufcr(sport, 0);
663
664 /* disable the DREN bit (Data Ready interrupt enable) before
665 * requesting IRQs
666 */
667 temp = readl(sport->port.membase + UCR4);
668
669 if (USE_IRDA(sport))
670 temp |= UCR4_IRSC;
671
672 /* set the trigger level for CTS */
673 temp &= ~(UCR4_CTSTL_MASK<< UCR4_CTSTL_SHF);
674 temp |= CTSTL<< UCR4_CTSTL_SHF;
675
676 writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
677
678 if (USE_IRDA(sport)) {
679 /* reset fifo's and state machines */
680 int i = 100;
681 temp = readl(sport->port.membase + UCR2);
682 temp &= ~UCR2_SRST;
683 writel(temp, sport->port.membase + UCR2);
684 while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) &&
685 (--i > 0)) {
686 udelay(1);
687 }
688 }
689
690 /*
691 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
692 * chips only have one interrupt.
693 */
694 if (sport->txirq > 0) {
695 retval = request_irq(sport->rxirq, imx_rxint, 0,
696 DRIVER_NAME, sport);
697 if (retval)
698 goto error_out1;
699
700 retval = request_irq(sport->txirq, imx_txint, 0,
701 DRIVER_NAME, sport);
702 if (retval)
703 goto error_out2;
704
705 /* do not use RTS IRQ on IrDA */
706 if (!USE_IRDA(sport)) {
707 retval = request_irq(sport->rtsirq, imx_rtsint,
708 (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
709 IRQF_TRIGGER_FALLING |
710 IRQF_TRIGGER_RISING,
711 DRIVER_NAME, sport);
712 if (retval)
713 goto error_out3;
714 }
715 } else {
716 retval = request_irq(sport->port.irq, imx_int, 0,
717 DRIVER_NAME, sport);
718 if (retval) {
719 free_irq(sport->port.irq, sport);
720 goto error_out1;
721 }
722 }
723
724 /*
725 * Finally, clear and enable interrupts
726 */
727 writel(USR1_RTSD, sport->port.membase + USR1);
728
729 temp = readl(sport->port.membase + UCR1);
730 temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
731
732 if (USE_IRDA(sport)) {
733 temp |= UCR1_IREN;
734 temp &= ~(UCR1_RTSDEN);
735 }
736
737 writel(temp, sport->port.membase + UCR1);
738
739 temp = readl(sport->port.membase + UCR2);
740 temp |= (UCR2_RXEN | UCR2_TXEN);
741 writel(temp, sport->port.membase + UCR2);
742
743 if (USE_IRDA(sport)) {
744 /* clear RX-FIFO */
745 int i = 64;
746 while ((--i > 0) &&
747 (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
748 barrier();
749 }
750 }
751
752 if (is_imx21_uart(sport)) {
753 temp = readl(sport->port.membase + UCR3);
754 temp |= IMX21_UCR3_RXDMUXSEL;
755 writel(temp, sport->port.membase + UCR3);
756 }
757
758 if (USE_IRDA(sport)) {
759 temp = readl(sport->port.membase + UCR4);
760 if (sport->irda_inv_rx)
761 temp |= UCR4_INVR;
762 else
763 temp &= ~(UCR4_INVR);
764 writel(temp | UCR4_DREN, sport->port.membase + UCR4);
765
766 temp = readl(sport->port.membase + UCR3);
767 if (sport->irda_inv_tx)
768 temp |= UCR3_INVT;
769 else
770 temp &= ~(UCR3_INVT);
771 writel(temp, sport->port.membase + UCR3);
772 }
773
774 /*
775 * Enable modem status interrupts
776 */
777 spin_lock_irqsave(&sport->port.lock,flags);
778 imx_enable_ms(&sport->port);
779 spin_unlock_irqrestore(&sport->port.lock,flags);
780
781 if (USE_IRDA(sport)) {
782 struct imxuart_platform_data *pdata;
783 pdata = sport->port.dev->platform_data;
784 sport->irda_inv_rx = pdata->irda_inv_rx;
785 sport->irda_inv_tx = pdata->irda_inv_tx;
786 sport->trcv_delay = pdata->transceiver_delay;
787 if (pdata->irda_enable)
788 pdata->irda_enable(1);
789 }
790
791 return 0;
792
793 error_out3:
794 if (sport->txirq)
795 free_irq(sport->txirq, sport);
796 error_out2:
797 if (sport->rxirq)
798 free_irq(sport->rxirq, sport);
799 error_out1:
800 return retval;
801 }
802
803 static void imx_shutdown(struct uart_port *port)
804 {
805 struct imx_port *sport = (struct imx_port *)port;
806 unsigned long temp;
807
808 temp = readl(sport->port.membase + UCR2);
809 temp &= ~(UCR2_TXEN);
810 writel(temp, sport->port.membase + UCR2);
811
812 if (USE_IRDA(sport)) {
813 struct imxuart_platform_data *pdata;
814 pdata = sport->port.dev->platform_data;
815 if (pdata->irda_enable)
816 pdata->irda_enable(0);
817 }
818
819 /*
820 * Stop our timer.
821 */
822 del_timer_sync(&sport->timer);
823
824 /*
825 * Free the interrupts
826 */
827 if (sport->txirq > 0) {
828 if (!USE_IRDA(sport))
829 free_irq(sport->rtsirq, sport);
830 free_irq(sport->txirq, sport);
831 free_irq(sport->rxirq, sport);
832 } else
833 free_irq(sport->port.irq, sport);
834
835 /*
836 * Disable all interrupts, port and break condition.
837 */
838
839 temp = readl(sport->port.membase + UCR1);
840 temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
841 if (USE_IRDA(sport))
842 temp &= ~(UCR1_IREN);
843
844 writel(temp, sport->port.membase + UCR1);
845 }
846
847 static void
848 imx_set_termios(struct uart_port *port, struct ktermios *termios,
849 struct ktermios *old)
850 {
851 struct imx_port *sport = (struct imx_port *)port;
852 unsigned long flags;
853 unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
854 unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
855 unsigned int div, ufcr;
856 unsigned long num, denom;
857 uint64_t tdiv64;
858
859 /*
860 * If we don't support modem control lines, don't allow
861 * these to be set.
862 */
863 if (0) {
864 termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR);
865 termios->c_cflag |= CLOCAL;
866 }
867
868 /*
869 * We only support CS7 and CS8.
870 */
871 while ((termios->c_cflag & CSIZE) != CS7 &&
872 (termios->c_cflag & CSIZE) != CS8) {
873 termios->c_cflag &= ~CSIZE;
874 termios->c_cflag |= old_csize;
875 old_csize = CS8;
876 }
877
878 if ((termios->c_cflag & CSIZE) == CS8)
879 ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS;
880 else
881 ucr2 = UCR2_SRST | UCR2_IRTS;
882
883 if (termios->c_cflag & CRTSCTS) {
884 if( sport->have_rtscts ) {
885 ucr2 &= ~UCR2_IRTS;
886 ucr2 |= UCR2_CTSC;
887 } else {
888 termios->c_cflag &= ~CRTSCTS;
889 }
890 }
891
892 if (termios->c_cflag & CSTOPB)
893 ucr2 |= UCR2_STPB;
894 if (termios->c_cflag & PARENB) {
895 ucr2 |= UCR2_PREN;
896 if (termios->c_cflag & PARODD)
897 ucr2 |= UCR2_PROE;
898 }
899
900 /*
901 * Ask the core to calculate the divisor for us.
902 */
903 baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
904 quot = uart_get_divisor(port, baud);
905
906 spin_lock_irqsave(&sport->port.lock, flags);
907
908 sport->port.read_status_mask = 0;
909 if (termios->c_iflag & INPCK)
910 sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR);
911 if (termios->c_iflag & (BRKINT | PARMRK))
912 sport->port.read_status_mask |= URXD_BRK;
913
914 /*
915 * Characters to ignore
916 */
917 sport->port.ignore_status_mask = 0;
918 if (termios->c_iflag & IGNPAR)
919 sport->port.ignore_status_mask |= URXD_PRERR;
920 if (termios->c_iflag & IGNBRK) {
921 sport->port.ignore_status_mask |= URXD_BRK;
922 /*
923 * If we're ignoring parity and break indicators,
924 * ignore overruns too (for real raw support).
925 */
926 if (termios->c_iflag & IGNPAR)
927 sport->port.ignore_status_mask |= URXD_OVRRUN;
928 }
929
930 del_timer_sync(&sport->timer);
931
932 /*
933 * Update the per-port timeout.
934 */
935 uart_update_timeout(port, termios->c_cflag, baud);
936
937 /*
938 * disable interrupts and drain transmitter
939 */
940 old_ucr1 = readl(sport->port.membase + UCR1);
941 writel(old_ucr1 & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN),
942 sport->port.membase + UCR1);
943
944 while ( !(readl(sport->port.membase + USR2) & USR2_TXDC))
945 barrier();
946
947 /* then, disable everything */
948 old_txrxen = readl(sport->port.membase + UCR2);
949 writel(old_txrxen & ~( UCR2_TXEN | UCR2_RXEN),
950 sport->port.membase + UCR2);
951 old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
952
953 if (USE_IRDA(sport)) {
954 /*
955 * use maximum available submodule frequency to
956 * avoid missing short pulses due to low sampling rate
957 */
958 div = 1;
959 } else {
960 div = sport->port.uartclk / (baud * 16);
961 if (div > 7)
962 div = 7;
963 if (!div)
964 div = 1;
965 }
966
967 rational_best_approximation(16 * div * baud, sport->port.uartclk,
968 1 << 16, 1 << 16, &num, &denom);
969
970 tdiv64 = sport->port.uartclk;
971 tdiv64 *= num;
972 do_div(tdiv64, denom * 16 * div);
973 tty_termios_encode_baud_rate(termios,
974 (speed_t)tdiv64, (speed_t)tdiv64);
975
976 num -= 1;
977 denom -= 1;
978
979 ufcr = readl(sport->port.membase + UFCR);
980 ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
981 writel(ufcr, sport->port.membase + UFCR);
982
983 writel(num, sport->port.membase + UBIR);
984 writel(denom, sport->port.membase + UBMR);
985
986 if (is_imx21_uart(sport))
987 writel(sport->port.uartclk / div / 1000,
988 sport->port.membase + IMX21_ONEMS);
989
990 writel(old_ucr1, sport->port.membase + UCR1);
991
992 /* set the parity, stop bits and data size */
993 writel(ucr2 | old_txrxen, sport->port.membase + UCR2);
994
995 if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
996 imx_enable_ms(&sport->port);
997
998 spin_unlock_irqrestore(&sport->port.lock, flags);
999 }
1000
1001 static const char *imx_type(struct uart_port *port)
1002 {
1003 struct imx_port *sport = (struct imx_port *)port;
1004
1005 return sport->port.type == PORT_IMX ? "IMX" : NULL;
1006 }
1007
1008 /*
1009 * Release the memory region(s) being used by 'port'.
1010 */
1011 static void imx_release_port(struct uart_port *port)
1012 {
1013 struct platform_device *pdev = to_platform_device(port->dev);
1014 struct resource *mmres;
1015
1016 mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1017 release_mem_region(mmres->start, resource_size(mmres));
1018 }
1019
1020 /*
1021 * Request the memory region(s) being used by 'port'.
1022 */
1023 static int imx_request_port(struct uart_port *port)
1024 {
1025 struct platform_device *pdev = to_platform_device(port->dev);
1026 struct resource *mmres;
1027 void *ret;
1028
1029 mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1030 if (!mmres)
1031 return -ENODEV;
1032
1033 ret = request_mem_region(mmres->start, resource_size(mmres), "imx-uart");
1034
1035 return ret ? 0 : -EBUSY;
1036 }
1037
1038 /*
1039 * Configure/autoconfigure the port.
1040 */
1041 static void imx_config_port(struct uart_port *port, int flags)
1042 {
1043 struct imx_port *sport = (struct imx_port *)port;
1044
1045 if (flags & UART_CONFIG_TYPE &&
1046 imx_request_port(&sport->port) == 0)
1047 sport->port.type = PORT_IMX;
1048 }
1049
1050 /*
1051 * Verify the new serial_struct (for TIOCSSERIAL).
1052 * The only change we allow are to the flags and type, and
1053 * even then only between PORT_IMX and PORT_UNKNOWN
1054 */
1055 static int
1056 imx_verify_port(struct uart_port *port, struct serial_struct *ser)
1057 {
1058 struct imx_port *sport = (struct imx_port *)port;
1059 int ret = 0;
1060
1061 if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX)
1062 ret = -EINVAL;
1063 if (sport->port.irq != ser->irq)
1064 ret = -EINVAL;
1065 if (ser->io_type != UPIO_MEM)
1066 ret = -EINVAL;
1067 if (sport->port.uartclk / 16 != ser->baud_base)
1068 ret = -EINVAL;
1069 if ((void *)sport->port.mapbase != ser->iomem_base)
1070 ret = -EINVAL;
1071 if (sport->port.iobase != ser->port)
1072 ret = -EINVAL;
1073 if (ser->hub6 != 0)
1074 ret = -EINVAL;
1075 return ret;
1076 }
1077
1078 static struct uart_ops imx_pops = {
1079 .tx_empty = imx_tx_empty,
1080 .set_mctrl = imx_set_mctrl,
1081 .get_mctrl = imx_get_mctrl,
1082 .stop_tx = imx_stop_tx,
1083 .start_tx = imx_start_tx,
1084 .stop_rx = imx_stop_rx,
1085 .enable_ms = imx_enable_ms,
1086 .break_ctl = imx_break_ctl,
1087 .startup = imx_startup,
1088 .shutdown = imx_shutdown,
1089 .set_termios = imx_set_termios,
1090 .type = imx_type,
1091 .release_port = imx_release_port,
1092 .request_port = imx_request_port,
1093 .config_port = imx_config_port,
1094 .verify_port = imx_verify_port,
1095 };
1096
1097 static struct imx_port *imx_ports[UART_NR];
1098
1099 #ifdef CONFIG_SERIAL_IMX_CONSOLE
1100 static void imx_console_putchar(struct uart_port *port, int ch)
1101 {
1102 struct imx_port *sport = (struct imx_port *)port;
1103
1104 while (readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)
1105 barrier();
1106
1107 writel(ch, sport->port.membase + URTX0);
1108 }
1109
1110 /*
1111 * Interrupts are disabled on entering
1112 */
1113 static void
1114 imx_console_write(struct console *co, const char *s, unsigned int count)
1115 {
1116 struct imx_port *sport = imx_ports[co->index];
1117 unsigned int old_ucr1, old_ucr2, ucr1;
1118
1119 /*
1120 * First, save UCR1/2 and then disable interrupts
1121 */
1122 ucr1 = old_ucr1 = readl(sport->port.membase + UCR1);
1123 old_ucr2 = readl(sport->port.membase + UCR2);
1124
1125 if (is_imx1_uart(sport))
1126 ucr1 |= IMX1_UCR1_UARTCLKEN;
1127 ucr1 |= UCR1_UARTEN;
1128 ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
1129
1130 writel(ucr1, sport->port.membase + UCR1);
1131
1132 writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2);
1133
1134 uart_console_write(&sport->port, s, count, imx_console_putchar);
1135
1136 /*
1137 * Finally, wait for transmitter to become empty
1138 * and restore UCR1/2
1139 */
1140 while (!(readl(sport->port.membase + USR2) & USR2_TXDC));
1141
1142 writel(old_ucr1, sport->port.membase + UCR1);
1143 writel(old_ucr2, sport->port.membase + UCR2);
1144 }
1145
1146 /*
1147 * If the port was already initialised (eg, by a boot loader),
1148 * try to determine the current setup.
1149 */
1150 static void __init
1151 imx_console_get_options(struct imx_port *sport, int *baud,
1152 int *parity, int *bits)
1153 {
1154
1155 if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) {
1156 /* ok, the port was enabled */
1157 unsigned int ucr2, ubir,ubmr, uartclk;
1158 unsigned int baud_raw;
1159 unsigned int ucfr_rfdiv;
1160
1161 ucr2 = readl(sport->port.membase + UCR2);
1162
1163 *parity = 'n';
1164 if (ucr2 & UCR2_PREN) {
1165 if (ucr2 & UCR2_PROE)
1166 *parity = 'o';
1167 else
1168 *parity = 'e';
1169 }
1170
1171 if (ucr2 & UCR2_WS)
1172 *bits = 8;
1173 else
1174 *bits = 7;
1175
1176 ubir = readl(sport->port.membase + UBIR) & 0xffff;
1177 ubmr = readl(sport->port.membase + UBMR) & 0xffff;
1178
1179 ucfr_rfdiv = (readl(sport->port.membase + UFCR) & UFCR_RFDIV) >> 7;
1180 if (ucfr_rfdiv == 6)
1181 ucfr_rfdiv = 7;
1182 else
1183 ucfr_rfdiv = 6 - ucfr_rfdiv;
1184
1185 uartclk = clk_get_rate(sport->clk);
1186 uartclk /= ucfr_rfdiv;
1187
1188 { /*
1189 * The next code provides exact computation of
1190 * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1))
1191 * without need of float support or long long division,
1192 * which would be required to prevent 32bit arithmetic overflow
1193 */
1194 unsigned int mul = ubir + 1;
1195 unsigned int div = 16 * (ubmr + 1);
1196 unsigned int rem = uartclk % div;
1197
1198 baud_raw = (uartclk / div) * mul;
1199 baud_raw += (rem * mul + div / 2) / div;
1200 *baud = (baud_raw + 50) / 100 * 100;
1201 }
1202
1203 if(*baud != baud_raw)
1204 printk(KERN_INFO "Serial: Console IMX rounded baud rate from %d to %d\n",
1205 baud_raw, *baud);
1206 }
1207 }
1208
1209 static int __init
1210 imx_console_setup(struct console *co, char *options)
1211 {
1212 struct imx_port *sport;
1213 int baud = 9600;
1214 int bits = 8;
1215 int parity = 'n';
1216 int flow = 'n';
1217
1218 /*
1219 * Check whether an invalid uart number has been specified, and
1220 * if so, search for the first available port that does have
1221 * console support.
1222 */
1223 if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
1224 co->index = 0;
1225 sport = imx_ports[co->index];
1226 if(sport == NULL)
1227 return -ENODEV;
1228
1229 if (options)
1230 uart_parse_options(options, &baud, &parity, &bits, &flow);
1231 else
1232 imx_console_get_options(sport, &baud, &parity, &bits);
1233
1234 imx_setup_ufcr(sport, 0);
1235
1236 return uart_set_options(&sport->port, co, baud, parity, bits, flow);
1237 }
1238
1239 static struct uart_driver imx_reg;
1240 static struct console imx_console = {
1241 .name = DEV_NAME,
1242 .write = imx_console_write,
1243 .device = uart_console_device,
1244 .setup = imx_console_setup,
1245 .flags = CON_PRINTBUFFER,
1246 .index = -1,
1247 .data = &imx_reg,
1248 };
1249
1250 #define IMX_CONSOLE &imx_console
1251 #else
1252 #define IMX_CONSOLE NULL
1253 #endif
1254
1255 static struct uart_driver imx_reg = {
1256 .owner = THIS_MODULE,
1257 .driver_name = DRIVER_NAME,
1258 .dev_name = DEV_NAME,
1259 .major = SERIAL_IMX_MAJOR,
1260 .minor = MINOR_START,
1261 .nr = ARRAY_SIZE(imx_ports),
1262 .cons = IMX_CONSOLE,
1263 };
1264
1265 static int serial_imx_suspend(struct platform_device *dev, pm_message_t state)
1266 {
1267 struct imx_port *sport = platform_get_drvdata(dev);
1268
1269 if (sport)
1270 uart_suspend_port(&imx_reg, &sport->port);
1271
1272 return 0;
1273 }
1274
1275 static int serial_imx_resume(struct platform_device *dev)
1276 {
1277 struct imx_port *sport = platform_get_drvdata(dev);
1278
1279 if (sport)
1280 uart_resume_port(&imx_reg, &sport->port);
1281
1282 return 0;
1283 }
1284
1285 #ifdef CONFIG_OF
1286 static int serial_imx_probe_dt(struct imx_port *sport,
1287 struct platform_device *pdev)
1288 {
1289 static int portnum = 0;
1290 struct device_node *np = pdev->dev.of_node;
1291 const struct of_device_id *of_id =
1292 of_match_device(imx_uart_dt_ids, &pdev->dev);
1293
1294 if (!np)
1295 return -ENODEV;
1296
1297 sport->port.line = portnum++;
1298 if (sport->port.line >= UART_NR)
1299 return -EINVAL;
1300
1301 if (of_get_property(np, "fsl,uart-has-rtscts", NULL))
1302 sport->have_rtscts = 1;
1303
1304 if (of_get_property(np, "fsl,irda-mode", NULL))
1305 sport->use_irda = 1;
1306
1307 sport->devdata = of_id->data;
1308
1309 return 0;
1310 }
1311 #else
1312 static inline int serial_imx_probe_dt(struct imx_port *sport,
1313 struct platform_device *pdev)
1314 {
1315 return -ENODEV;
1316 }
1317 #endif
1318
1319 static void serial_imx_probe_pdata(struct imx_port *sport,
1320 struct platform_device *pdev)
1321 {
1322 struct imxuart_platform_data *pdata = pdev->dev.platform_data;
1323
1324 sport->port.line = pdev->id;
1325 sport->devdata = (struct imx_uart_data *) pdev->id_entry->driver_data;
1326
1327 if (!pdata)
1328 return;
1329
1330 if (pdata->flags & IMXUART_HAVE_RTSCTS)
1331 sport->have_rtscts = 1;
1332
1333 if (pdata->flags & IMXUART_IRDA)
1334 sport->use_irda = 1;
1335 }
1336
1337 static int serial_imx_probe(struct platform_device *pdev)
1338 {
1339 struct imx_port *sport;
1340 struct imxuart_platform_data *pdata;
1341 void __iomem *base;
1342 int ret = 0;
1343 struct resource *res;
1344
1345 sport = kzalloc(sizeof(*sport), GFP_KERNEL);
1346 if (!sport)
1347 return -ENOMEM;
1348
1349 ret = serial_imx_probe_dt(sport, pdev);
1350 if (ret == -ENODEV)
1351 serial_imx_probe_pdata(sport, pdev);
1352
1353 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1354 if (!res) {
1355 ret = -ENODEV;
1356 goto free;
1357 }
1358
1359 base = ioremap(res->start, PAGE_SIZE);
1360 if (!base) {
1361 ret = -ENOMEM;
1362 goto free;
1363 }
1364
1365 sport->port.dev = &pdev->dev;
1366 sport->port.mapbase = res->start;
1367 sport->port.membase = base;
1368 sport->port.type = PORT_IMX,
1369 sport->port.iotype = UPIO_MEM;
1370 sport->port.irq = platform_get_irq(pdev, 0);
1371 sport->rxirq = platform_get_irq(pdev, 0);
1372 sport->txirq = platform_get_irq(pdev, 1);
1373 sport->rtsirq = platform_get_irq(pdev, 2);
1374 sport->port.fifosize = 32;
1375 sport->port.ops = &imx_pops;
1376 sport->port.flags = UPF_BOOT_AUTOCONF;
1377 init_timer(&sport->timer);
1378 sport->timer.function = imx_timeout;
1379 sport->timer.data = (unsigned long)sport;
1380
1381 sport->clk = clk_get(&pdev->dev, "uart");
1382 if (IS_ERR(sport->clk)) {
1383 ret = PTR_ERR(sport->clk);
1384 goto unmap;
1385 }
1386 clk_enable(sport->clk);
1387
1388 sport->port.uartclk = clk_get_rate(sport->clk);
1389
1390 imx_ports[sport->port.line] = sport;
1391
1392 pdata = pdev->dev.platform_data;
1393 if (pdata && pdata->init) {
1394 ret = pdata->init(pdev);
1395 if (ret)
1396 goto clkput;
1397 }
1398
1399 ret = uart_add_one_port(&imx_reg, &sport->port);
1400 if (ret)
1401 goto deinit;
1402 platform_set_drvdata(pdev, &sport->port);
1403
1404 return 0;
1405 deinit:
1406 if (pdata && pdata->exit)
1407 pdata->exit(pdev);
1408 clkput:
1409 clk_put(sport->clk);
1410 clk_disable(sport->clk);
1411 unmap:
1412 iounmap(sport->port.membase);
1413 free:
1414 kfree(sport);
1415
1416 return ret;
1417 }
1418
1419 static int serial_imx_remove(struct platform_device *pdev)
1420 {
1421 struct imxuart_platform_data *pdata;
1422 struct imx_port *sport = platform_get_drvdata(pdev);
1423
1424 pdata = pdev->dev.platform_data;
1425
1426 platform_set_drvdata(pdev, NULL);
1427
1428 if (sport) {
1429 uart_remove_one_port(&imx_reg, &sport->port);
1430 clk_put(sport->clk);
1431 }
1432
1433 clk_disable(sport->clk);
1434
1435 if (pdata && pdata->exit)
1436 pdata->exit(pdev);
1437
1438 iounmap(sport->port.membase);
1439 kfree(sport);
1440
1441 return 0;
1442 }
1443
1444 static struct platform_driver serial_imx_driver = {
1445 .probe = serial_imx_probe,
1446 .remove = serial_imx_remove,
1447
1448 .suspend = serial_imx_suspend,
1449 .resume = serial_imx_resume,
1450 .id_table = imx_uart_devtype,
1451 .driver = {
1452 .name = "imx-uart",
1453 .owner = THIS_MODULE,
1454 .of_match_table = imx_uart_dt_ids,
1455 },
1456 };
1457
1458 static int __init imx_serial_init(void)
1459 {
1460 int ret;
1461
1462 printk(KERN_INFO "Serial: IMX driver\n");
1463
1464 ret = uart_register_driver(&imx_reg);
1465 if (ret)
1466 return ret;
1467
1468 ret = platform_driver_register(&serial_imx_driver);
1469 if (ret != 0)
1470 uart_unregister_driver(&imx_reg);
1471
1472 return 0;
1473 }
1474
1475 static void __exit imx_serial_exit(void)
1476 {
1477 platform_driver_unregister(&serial_imx_driver);
1478 uart_unregister_driver(&imx_reg);
1479 }
1480
1481 module_init(imx_serial_init);
1482 module_exit(imx_serial_exit);
1483
1484 MODULE_AUTHOR("Sascha Hauer");
1485 MODULE_DESCRIPTION("IMX generic serial port driver");
1486 MODULE_LICENSE("GPL");
1487 MODULE_ALIAS("platform:imx-uart");
Linus' kernel tree