inotify: fix race
[linux-2.6.22.y-op.git] / include / asm-powerpc / ptrace.h
blob4ad77a13f8652ebdf69aa2225ceea03346916212
1 #ifndef _ASM_POWERPC_PTRACE_H
2 #define _ASM_POWERPC_PTRACE_H
4 /*
5 * Copyright (C) 2001 PPC64 Team, IBM Corp
7 * This struct defines the way the registers are stored on the
8 * kernel stack during a system call or other kernel entry.
10 * this should only contain volatile regs
11 * since we can keep non-volatile in the thread_struct
12 * should set this up when only volatiles are saved
13 * by intr code.
15 * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
16 * that the overall structure is a multiple of 16 bytes in length.
18 * Note that the offsets of the fields in this struct correspond with
19 * the PT_* values below. This simplifies arch/powerpc/kernel/ptrace.c.
21 * This program is free software; you can redistribute it and/or
22 * modify it under the terms of the GNU General Public License
23 * as published by the Free Software Foundation; either version
24 * 2 of the License, or (at your option) any later version.
27 #ifndef __ASSEMBLY__
29 struct pt_regs {
30 unsigned long gpr[32];
31 unsigned long nip;
32 unsigned long msr;
33 unsigned long orig_gpr3; /* Used for restarting system calls */
34 unsigned long ctr;
35 unsigned long link;
36 unsigned long xer;
37 unsigned long ccr;
38 #ifdef __powerpc64__
39 unsigned long softe; /* Soft enabled/disabled */
40 #else
41 unsigned long mq; /* 601 only (not used at present) */
42 /* Used on APUS to hold IPL value. */
43 #endif
44 unsigned long trap; /* Reason for being here */
45 /* N.B. for critical exceptions on 4xx, the dar and dsisr
46 fields are overloaded to hold srr0 and srr1. */
47 unsigned long dar; /* Fault registers */
48 unsigned long dsisr; /* on 4xx/Book-E used for ESR */
49 unsigned long result; /* Result of a system call */
52 #endif /* __ASSEMBLY__ */
54 #ifdef __KERNEL__
56 #ifdef __powerpc64__
58 #define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */
60 /* Size of dummy stack frame allocated when calling signal handler. */
61 #define __SIGNAL_FRAMESIZE 128
62 #define __SIGNAL_FRAMESIZE32 64
64 #else /* __powerpc64__ */
66 #define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */
68 /* Size of stack frame allocated when calling signal handler. */
69 #define __SIGNAL_FRAMESIZE 64
71 #endif /* __powerpc64__ */
73 #ifndef __ASSEMBLY__
75 #define instruction_pointer(regs) ((regs)->nip)
76 #define regs_return_value(regs) ((regs)->gpr[3])
78 #ifdef CONFIG_SMP
79 extern unsigned long profile_pc(struct pt_regs *regs);
80 #else
81 #define profile_pc(regs) instruction_pointer(regs)
82 #endif
84 #ifdef __powerpc64__
85 #define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
86 #else
87 #define user_mode(regs) (((regs)->msr & MSR_PR) != 0)
88 #endif
90 #define force_successful_syscall_return() \
91 do { \
92 set_thread_flag(TIF_NOERROR); \
93 } while(0)
96 * We use the least-significant bit of the trap field to indicate
97 * whether we have saved the full set of registers, or only a
98 * partial set. A 1 there means the partial set.
99 * On 4xx we use the next bit to indicate whether the exception
100 * is a critical exception (1 means it is).
102 #define FULL_REGS(regs) (((regs)->trap & 1) == 0)
103 #ifndef __powerpc64__
104 #define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) == 0)
105 #endif /* ! __powerpc64__ */
106 #define TRAP(regs) ((regs)->trap & ~0xF)
107 #ifdef __powerpc64__
108 #define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1)
109 #else
110 #define CHECK_FULL_REGS(regs) \
111 do { \
112 if ((regs)->trap & 1) \
113 printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \
114 } while (0)
115 #endif /* __powerpc64__ */
117 #endif /* __ASSEMBLY__ */
119 #endif /* __KERNEL__ */
122 * Offsets used by 'ptrace' system call interface.
123 * These can't be changed without breaking binary compatibility
124 * with MkLinux, etc.
126 #define PT_R0 0
127 #define PT_R1 1
128 #define PT_R2 2
129 #define PT_R3 3
130 #define PT_R4 4
131 #define PT_R5 5
132 #define PT_R6 6
133 #define PT_R7 7
134 #define PT_R8 8
135 #define PT_R9 9
136 #define PT_R10 10
137 #define PT_R11 11
138 #define PT_R12 12
139 #define PT_R13 13
140 #define PT_R14 14
141 #define PT_R15 15
142 #define PT_R16 16
143 #define PT_R17 17
144 #define PT_R18 18
145 #define PT_R19 19
146 #define PT_R20 20
147 #define PT_R21 21
148 #define PT_R22 22
149 #define PT_R23 23
150 #define PT_R24 24
151 #define PT_R25 25
152 #define PT_R26 26
153 #define PT_R27 27
154 #define PT_R28 28
155 #define PT_R29 29
156 #define PT_R30 30
157 #define PT_R31 31
159 #define PT_NIP 32
160 #define PT_MSR 33
161 #ifdef __KERNEL__
162 #define PT_ORIG_R3 34
163 #endif
164 #define PT_CTR 35
165 #define PT_LNK 36
166 #define PT_XER 37
167 #define PT_CCR 38
168 #ifndef __powerpc64__
169 #define PT_MQ 39
170 #else
171 #define PT_SOFTE 39
172 #define PT_TRAP 40
173 #define PT_DAR 41
174 #define PT_DSISR 42
175 #define PT_RESULT 43
176 #endif
178 #define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */
180 #ifndef __powerpc64__
182 #define PT_FPR31 (PT_FPR0 + 2*31)
183 #define PT_FPSCR (PT_FPR0 + 2*32 + 1)
185 #else /* __powerpc64__ */
187 #define PT_FPSCR (PT_FPR0 + 32) /* each FP reg occupies 1 slot in 64-bit space */
189 #ifdef __KERNEL__
190 #define PT_FPSCR32 (PT_FPR0 + 2*32 + 1) /* each FP reg occupies 2 32-bit userspace slots */
191 #endif
193 #define PT_VR0 82 /* each Vector reg occupies 2 slots in 64-bit */
194 #define PT_VSCR (PT_VR0 + 32*2 + 1)
195 #define PT_VRSAVE (PT_VR0 + 33*2)
197 #ifdef __KERNEL__
198 #define PT_VR0_32 164 /* each Vector reg occupies 4 slots in 32-bit */
199 #define PT_VSCR_32 (PT_VR0 + 32*4 + 3)
200 #define PT_VRSAVE_32 (PT_VR0 + 33*4)
201 #endif
203 #endif /* __powerpc64__ */
206 * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
207 * The transfer totals 34 quadword. Quadwords 0-31 contain the
208 * corresponding vector registers. Quadword 32 contains the vscr as the
209 * last word (offset 12) within that quadword. Quadword 33 contains the
210 * vrsave as the first word (offset 0) within the quadword.
212 * This definition of the VMX state is compatible with the current PPC32
213 * ptrace interface. This allows signal handling and ptrace to use the same
214 * structures. This also simplifies the implementation of a bi-arch
215 * (combined (32- and 64-bit) gdb.
217 #define PTRACE_GETVRREGS 18
218 #define PTRACE_SETVRREGS 19
220 /* Get/set all the upper 32-bits of the SPE registers, accumulator, and
221 * spefscr, in one go */
222 #define PTRACE_GETEVRREGS 20
223 #define PTRACE_SETEVRREGS 21
226 * Get or set a debug register. The first 16 are DABR registers and the
227 * second 16 are IABR registers.
229 #define PTRACE_GET_DEBUGREG 25
230 #define PTRACE_SET_DEBUGREG 26
232 /* Additional PTRACE requests implemented on PowerPC. */
233 #define PPC_PTRACE_GETREGS 0x99 /* Get GPRs 0 - 31 */
234 #define PPC_PTRACE_SETREGS 0x98 /* Set GPRs 0 - 31 */
235 #define PPC_PTRACE_GETFPREGS 0x97 /* Get FPRs 0 - 31 */
236 #define PPC_PTRACE_SETFPREGS 0x96 /* Set FPRs 0 - 31 */
238 /* Calls to trace a 64bit program from a 32bit program */
239 #define PPC_PTRACE_PEEKTEXT_3264 0x95
240 #define PPC_PTRACE_PEEKDATA_3264 0x94
241 #define PPC_PTRACE_POKETEXT_3264 0x93
242 #define PPC_PTRACE_POKEDATA_3264 0x92
243 #define PPC_PTRACE_PEEKUSR_3264 0x91
244 #define PPC_PTRACE_POKEUSR_3264 0x90
246 #endif /* _ASM_POWERPC_PTRACE_H */