tex/lilyponddefs.tex

   1 %%% lilyponddefs.tex -- TeX macros for LilyPond output.
   2 %%%
   3 %%%  source file of the GNU LilyPond music typesetter
   4 %%%
   5 %%% (c) 1998--2005 Jan Nieuwenhuizen <janneke@gnu.org>
   6 %%%                 Han-Wen Nienhuys <hanwen@cs.uu.nl>
   7 %%%                 Mats Bengtsson <mats.bengtsson@s3.kth.se>
   8 %%%
   9 %%
  10 %% Avoid \par while reading this file.
  11 %%
  12 \edef\lilyponddefsELC{\the\endlinechar}%
  13 \endlinechar -1\relax
  14
  15 %% This runs with plain TeX, LaTeX, pdftex, and texinfo.
  16 %%
  17 %% To avoid interferences, lilyponddefs.tex must be loaded within a group.
  18 %% It is loaded only once, so the definitions must be global.
  19 %%
  20 %% The overall structure of a file created by LilyPond is as follows:
  21 %%
  22 %%   <lilypond parameter definitions>
  23 %%   <font setup>
  24 %%   \ifx\lilypondstart \undefined
  25 %%     \input lilyponddefs
  26 %%   \fi
  27 %%   \lilypondstart
  28 %%   <note output>
  29 %%   \lilypondend
  30
  31 %% A temporary variable.
  32 %%
  33 \newdimen\lytempdim
  34
  35 %% The scaling factor for all dimensions.
  36 %%
  37 \newdimen\outputscale
  38
  39 \long\gdef\lilypondfirst#1#2{#1}
  40 \long\gdef\lilypondsecond#1#2{#2}
  41
  42 %% \lilypondundefined{xxx}{foo}{bar}
  43 %%
  44 %%   If `xxx' (without the leading backslash) is an undefined macro,
  45 %%   execute block `foo'.  Otherwise, execute block `bar'.  Based on
  46 %%   a similar macro from the LaTeX kernel.
  47 %%
  48 \gdef\lilypondifundefined#1{
  49   \expandafter\ifx\csname#1\endcsname\relax
  50     \expandafter\lilypondfirst
  51   \else
  52     \expandafter\lilypondsecond
  53   \fi
  54 }
  55
  56 %% Urgh.  LilyPond uses EC fonts, but texinfo is based on CM.  We thus
  57 %% have to handle T1 font encoding by ourselves; all manipulations are
  58 %% collected in the macro \lilypondECencoding.  Note that the following
  59 %% code only provides the texinfo interface, not complete access to all
  60 %% EC glyphs.
  61 %%
  62 %% All definitions are taken from texinfo or LaTeX (with modifications
  63 %% if necessary).
  64 %%
  65 \begingroup
  66 \catcode `\@=11\relax
  67 \gdef\lilypondECencoding{
  68   \def\"##1{
  69     {\accent4 ##1}}
  70   \def\'##1{
  71     {\accent1 ##1}}
  72   \def\,##1{
  73     {\leavevmode
  74      \setbox\z@\hbox{##1}
  75      \ifdim\ht\z@=1ex
  76        \accent11 ##1
  77      \else
  78        {\ooalign{
  79           \unhbox\z@
  80           \crcr
  81           \hidewidth
  82           \char11
  83           \hidewidth}}
  84      \fi}}
  85   \def\=##1{
  86     {\accent9 ##1}}
  87   \def\^##1{
  88     {\accent2 ##1}}
  89   \def\`##1{
  90     {\accent0 ##1}}
  91   \def\~##1{
  92     {\accent3 ##1}}
  93   \def\dotaccent##1{
  94     {\accent10 ##1}}
  95   \def\H##1{
  96     {\accent5 ##1}}
  97   \def\ringaccent##1{
  98     {\accent6 ##1}}
  99 % \def\tieaccent##1{}        % unsupported: this is TS1
 100   \def\u##1{
 101     {\accent8 ##1}}
 102   \def\ubaraccent##1{
 103     {\o@lign{
 104        \relax
 105        ##1
 106        \crcr
 107        \hidewidth
 108        \sh@ft{29}\vbox to.2ex{
 109          \hbox{\char9}
 110          \vss}
 111        \hidewidth}}}
 112   \def\udotaccent##1{
 113     {\o@lign{
 114        \relax
 115        ##1
 116        \crcr
 117        \hidewidth
 118        \sh@ft{10}.
 119        \hidewidth}}}
 120   \def\v##1{
 121     {\accent7 ##1}}
 122
 123   \chardef\exclamdown=189
 124   \chardef\questiondown=190
 125
 126   \def\aa{
 127     \ringaccent{a}}
 128   \def\AA{
 129     \ringaccent{A}}
 130   \chardef\AE=198
 131   \chardef\ae=230
 132   \chardef\ptexi=25
 133   \chardef\j=26
 134   \chardef\L=138
 135   \chardef\l=170
 136   \chardef\O=216
 137   \chardef\o=248
 138   \chardef\OE=215
 139   \chardef\oe=247
 140   \chardef\ss=255
 141 }
 142 \endgroup
 143
 144 %% This macro provides the necessary setup to make the lilypond data
 145 %% work with plain TeX, LaTeX, and texinfo.
 146 %%
 147 %% The reason of using \begingroup and \endgroup is to make the macro \x
 148 %% immediately disappear after it has been executed.  Since we have \def
 149 %% within \def within \gdef, four hash signs (`#') are needed for
 150 %% parameters.
 151 %%
 152 %% \lilypondfontencoding is emitted by LilyPond to set the encoding of
 153 %% text strings.
 154 %%
 155 \gdef\lilypondstart{
 156   \frenchspacing
 157   \outputscale \lilypondpaperoutputscale\lilypondpaperunit
 158
 159   \begingroup
 160   \catcode `\@=11\relax
 161
 162   %% \@nodocument is defined as \relax after `\begin{document}'
 163   \lilypondifundefined{@nodocument}
 164     {%% Either plain TeX or texinfo or not at the beginning of LaTeX input.
 165      \def\x{
 166        \endgroup
 167
 168        \def\lilypondfontencoding####1{
 169          \lilypondECencoding}
 170        \def\lilypondpagebreak{
 171          \eject}
 172        \def\lilypondnopagebreak{
 173          \ifvmode
 174            \penalty 10000\relax
 175          \fi}}}
 176
 177     {%% LaTeX mode: Provide a complete preamble.
 178      \def\x{
 179        \endgroup
 180
 181        %% Indicate that we shall emit `\end{document}' while executing
 182        %% \lilypondend.
 183        \def\lilyponddocument{}
 184
 185        \def\lilypondfontencoding####1{
 186          \fontencoding{####1}
 187          \selectfont}
 188        \def\lilypondpagebreak{
 189          \newpage}
 190        \def\lilypondnopagebreak{
 191          \nopagebreak}
 192
 193        \documentclass[\lilyponddocumentclassoptions]{article}
 194
 195        %% As a safety guard, don't produce auxiliary files.
 196        \nofiles
 197
 198        %% FIXME: workaround non-existent TeX.def.
 199        \def\TeXdef{TeX}\ifx\TeXdef\lilypondpaperinputencoding
 200          \usepackage[latin1]{inputenc}
 201        \else
 202          \usepackage[\lilypondpaperinputencoding]{inputenc}
 203        \fi
 204        \pagestyle{empty}
 205
 206        \usepackage{color}
 207
 208        \lilypondifundefined{lilypondclassic}
 209          {%% If not in `classic' mode, undo LaTeX's page layout settings
 210           %% since LilyPond does the layout by itself.
 211           \topmargin-1in
 212           \headheight0pt\headsep0pt
 213           \oddsidemargin-1in
 214           \evensidemargin\oddsidemargin}
 215
 216          {%% Otherwise center output horizontally, without changing the
 217           %% vertical positioning.
 218           \hsize\lilypondpaperlinewidth\lilypondpaperunit
 219           \lytempdim \paperwidth
 220           \advance\lytempdim -\the\hsize
 221           \lytempdim 0.5\lytempdim
 222           \advance\lytempdim -1in
 223           \oddsidemargin \lytempdim
 224           \evensidemargin \lytempdim}
 225
 226        \parindent 0pt
 227
 228        %% We can't directly say `\begin{document}' in this macro since
 229        %% older versions of texinfo.tex define \begin as \outer; this
 230        %% means that it causes an error if \begin is found within another
 231        %% macro (even if the corresponding code will never be executed).
 232        %% As a workaround we use \csname to call \begin.
 233        \csname begin\endcsname{document}}}
 234   \x}
 235
 236 %% The opposite of \lilypondstart.
 237 %%
 238 \gdef\lilypondend{
 239   %% Handle the `lastpagefill' parameter from the \layout block.
 240   %% Ignore it if \lilypondbook is defined.
 241   \lilypondifundefined{lilypondbook}
 242     {\lilypondifundefined{lilypondpaperlastpagefill}
 243        {\vskip 0pt plus\lilypondpaperinterscorelinefill00 fill}
 244        {}}
 245     {}
 246
 247   \begingroup
 248   \lilypondifundefined{lilyponddocument}
 249     {\def\x{
 250        \endgroup}}
 251     {\def\x{
 252        \endgroup
 253        \csname end\endcsname{document}}}
 254   \x}
 255
 256 %% Load the PostScript drawing routines.  This is done using \special.
 257 %% To avoid multiple inclusions, redefine \lilypondspecial to a no-op
 258 %% afterwards.
 259 %%
 260 \gdef\lilypondspecial{
 261   \special{header=music-drawing-routines.ps}
 262   \gdef\lilypondspecial{}}
 263
 264 %% The most used macro in LilyPond output.  Put #3 into a zero-width box
 265 %% which is moved to the right by #1 (scaled by \outputscale) and moved
 266 %% up by #2 (also scaled by \outputscale).
 267 %%
 268 \gdef\lyitem#1#2#3{
 269   \raise #2\outputscale \hbox to 0pt {
 270     \kern #1\outputscale
 271     #3
 272     \hss}}
 273
 274 %% All LilyPond music data is enclosed in this macro (as third argument).
 275 %% The data (which consists of boxes with zero width) gets an artificial
 276 %% width of #1 and a height of #2.  The resulting box is then centered
 277 %% vertically along the x-height of the current font.
 278 %%
 279 %% Parameters #1 and #2 are scaled by \outputscale.
 280 %%
 281 \gdef\lybox#1#2#3{
 282   \lytempdim #2\outputscale
 283   \lytempdim -0.5\lytempdim
 284   \advance\lytempdim 1ex
 285   \leavevmode
 286   \raise \lytempdim \hbox to #1\outputscale {
 287     %% Convert depth of #3 into height only.
 288     \vbox to #2\outputscale {\hbox{#3}\vss}
 289     \hss}}
 290
 291 %% Produce a black bar (width #2, depth #3, height #4) with a vertical
 292 %% offset #1.  Everything is scaled by \outputscale.
 293 %%
 294 \gdef\lyvrule#1#2#3#4{
 295   \kern#1\outputscale
 296   \vrule width #2\outputscale depth #3\outputscale height #4\outputscale}
 297
 298 %% FIXME: 'interscoreline' and 'lilypondPAPERinterscoreline
 299 %%
 300 \lilypondifundefined{lilypondpaperinterscorelinefill}
 301   {\gdef\lilypondpaperinterscorelinefill{0}}
 302   {\gdef\lilypondpaperinterscorelinefill{1}}
 303
 304 %% Allow overriding of interscoreline, e.g., for LilyPond's --preview
 305 %%
 306 \lilypondifundefined{interscoreline}
 307   {\lilypondifundefined{lilypondclassic}
 308      {\gdef\interscoreline{}}
 309      {\gdef\interscoreline{
 310         \vskip\lilypondpaperinterscoreline\lilypondpaperunit
 311         plus \lilypondpaperinterscorelinefill fill}}}
 312   {}
 313
 314 %% Include PostScript definitions (which are differently defined for
 315 %% TeX and pdfTeX).  This is loaded once only because the inputted files
 316 %% define \lilypondpostscript.
 317 %%
 318 %% (Don't remove the spaces after the arguments to \input!)
 319 %%
 320 %
 321 %% In teTeX-3.0, latex is actually pdfetex, and we need
 322 %% ifpdf.sty to determinine if we are really *tex or pdf*tex.
 323 %
 324 %% \input ifpdf.sty
 325 %
 326 %% However, ifpfd.sty is too smart for LilyPond, so we copy the
 327 %% logic here.  Using \input ifpdf.sty is a no-op when using latex,
 328 %% and the \ifpdf switch is needed before \documentclass, using
 329 %% \usepackage{ifpdf} is not an option.
 330 %
 331 \input lily-ps-defs
 332
 333 % barfs with texi
 334 % Runaway argument?
 335 %{
 336 %! Forbidden control sequence found while scanning use of \lilypondfirst.
 337 %<inserted text>
 338 %                \par
 339 %<to be read again>
 340 %                   \newif
 341 %l.330   {\newif
 342 %               \ifpdf
 343 %?
 344 %
 345 %%
 346 %\lilypondifundefined{lilypondpostscript}
 347 %  {\newif\ifpdf
 348 %   \ifx\pdfoutput\undefined
 349 %   \else
 350 %     \ifx\pdfoutput\relax
 351 %     \else
 352 %       \ifcase\pdfoutput
 353 %       \else
 354 %         \pdftrue
 355 %       \fi
 356 %     \fi
 357 %   \fi
 358 %   \ifpdf
 359 %     {\input lily-pdf-defs }
 360 %   \else
 361 %     {\input lily-ps-defs }
 362 %   \fi}
 363 %  {}
 364 %
 365 %% Restore newline functionality (disabled to avoid \par).
 366 %%
 367 \endlinechar \lilyponddefsELC
 368 \endinput
 369
 370 %% end lilyponddefs.tex