lilypond-1.1.49

[lilypond.git] / Documentation / faq.yo

article(FAQ - GNU LilyPond FAQs)()()()

DEFINEMACRO(question)(1)(subsect(ARG1))

sect(Miscellaneous)

question(HELP! I'm stuck!)

Please read this document carefully.  If you are still at loss,
send your questions to the bf(mailing list), and not to authors
directly.

Note: relative paths are meant to be relative to the source directory

sect(Installing)

question(If I install the .exe file on my DOS/windows 3.11 machine, it
doesn't work.)

The DOS port is done with the cygnus gnu/windows32 port of the GNU utils.
It does em(not) work with windows 3.x; you need Windows-NT (95/98?).  This
is not a recommendation, however.  We recommend you use Unix, in
particular, use GNU/Linux.  For further information see file(README-W32).

question(Where is guile-config)

RedHat RPMS don't include guile-config.  You need guile-config as it
was produced during the RPM build run.  Build the RPM from source
(file(.src.rpm)), and use the guile-config that is in
file(/usr/src/redhat/BUILD/guile-1.3/guile-config/).


question(I get all kinds of errors while  compiling file(parser.cc))

LilyPond uses features of bison version 1.25. Please confirm that
you are using a version 1.25 or better, that is bf(GNU) bison
bf(1.25). Don't forget to do "make clean" after installing it. Don't
forget to remove the stale file(bison.simple) as well.

If the problem persists, then please send a bug report to the mailing list.

question(I upgraded by applying a patch, and now my configure/build breaks.)

Patches don't include automatically generated files, i.e. 
file(configure) and files generated by file(configure).  Regenerate them 
yourself:
verb(
    autoconf
    configure
)
You might need to create some extra "out" directories.  Do this with
verb(
    make outdirs
)
question(Some of your neat scripts fail, what directories do you use:)

[This only applies if you don't do code(make install), and develop out
of the source directory]

I have a directory which contains all our development projects
verb(
    ~/usr/
)

which looks like file(/usr/)
verb(
    bin/
    share
    lib/
    share/
    src/

    etc....
)

The directory  file(~/usr/src/) contains something like
includefile(../stepmake/Documentation/layout.yo)
)       

~/usr/src/bin is in the PATH, and contains symbolic links to the
compiled executables.

question(Is there an emacs mode?)

Yes.  It is included with the source archive as mudela-mode.el.  If
you have an rpm it is in /usr/doc/lilypond-X/.  You have to install it
yourself.

question(How do i create the file(.tfm) files?)

You don't.  The file(.tfm) files should be generated automatically by
Metafont when you run TeX().  Check your TeX() installation, or ask
your local TeX() guru.  The supplied file(.afm) files are intended to
be used by LilyPond, not by any other programs.


sect(Documentation)

question(Why is the documentation/website/etc. so lousy?)

LilyPond development is moving quite fast, documentation will often
lag a bit behind.  We must always make a choice between writing more
doco, writing more code and answering email.

If you think you can make a correction, or devised a solution that 
should be documented, please do so and send in a patch.

sect(Language: mudela)

question(Why can't you type code(#c) in stead of code(cis) ?)

We think that code(#c) looks as if you are entering the symbols to
print (which you are not; remember, you're entering the musical
content in Mudela)


question(Why do I have to type the accidentals to the note if I specified them?)

Take this example
verb(
    cis cis
)
Independently of how it was written and what the current key was, you
would say that you are playing and reading "two C-sharp" notes.  We
have tried to make the language somewhat context-free.  Of course
sheet music is not context-free.  Unfortunately, sheet music is also 2
dimensional, and ASCII is not.

Technically it would be feasible to have the Interpreting phase do
tricky things to add (or leave out) the accidentals, but we think that
it is impractical: it hampers the readability and portability of your
source, since you need LilyPond to fill in the details and actually
make sense of it.


question(What is code(cis) anyway)

code(cis) is the dutch naming for C-sharp. The notes are named
a, b,.., g. The suffix -is means sharp, and -es flat. This system is
common in a number of languages (such as swedish, dutch, german.)
Certain other languages (such as English, French and Italian) just add
the word for "sharp" to the notename.

We chose the Dutch system, because we're dutch. You are free to chose
whatever names you like; they are user definable.


question(Why are [] around the notes, and () inbetween?)

[] designate beams, a note can only be in one beam at the same
time. () is a slur, which connects notes.  You need to be able to 
specify
verb(
    a()a()a
)

question(I want to insert some TeX commands.)

You shouldn't: it's against LilyPond philosophy to have typesetting
commands in the mudela source. Moreover, this would be difficult.
LilyPond uses TeX like a glorified output engine: the output consists
of (x,y) positions and symbols.  You can only sensibly do TeX stuff in
the symbol string.  You can access the symbol string easily for some
symbols (notably lyrics and code(^"text") commands).


sect(Do you support ...)

question(Do you support pop songs (chords, single staff, lyrics)?)

Yes, see the file(twinkle-pop) example.


question(Do you support guitar chord diagrams?)

No, not yet. We ourselves don't play guitar, and don't know the
fine points of this notation.  We would welcome anyone who could give
this a try.

question(Do you support TAB notation?)

No. The same as for the previous question goes, but TAB is a lot
more work than diagrams (TAB needs modification of Parser, Lexer,
Staff, Notehead, Stem code and all the code that creates these graphic
elements.)

question(Do you support multiple staff-sizes?)

Yes.  At this time you can choose between 11, 13, 16, 19, 20, 23 and
20 pt staff-size.  Use the staffLineLeading property for setting the
size of the staff, and fontSize for setting the size of the glyphs.

question(Do you support Gregorian chant notation?)

No.  There is no reason why LilyPond can't be extended to do so, but
we haven't done it yet (and there are currently no plans to do it).

question(Do you support grace notes?)

No.  But they can kludged.  See file(input/test/grace.ly)


sect(How do I ....)

question(How do I change the TeX layout?)

See file(lilyponddefs.tex), it has some comments.  Or use file(ly2dvi).

question(How do I place lyrics under em(each) of the staves in a
score, as choral music. I can work out how to put lyrics for each line
all under the top line, or at the bottom but not between!)

You change the order lyrics and staves.  You have to name all
staves (lyric and melodic), otherwise they will end up in the same
staff/lyricline
verb(   
        \score {
                < \melodic \type Staff = "treble" \trebleMelody
                  \lyric \type Lyrics = "tlyrics" \trebtext
                  \type Staff = "bass" \melodic \bassMelody        
                  \lyric \type Lyrics = "blyrics" \basstext      
                >
                \paper {  }
        }
)

question(How do I put more than one marking on a note.)

You can stack them 
verb(
        c4^"a"^"b"
)
or use spacing-notes to put markings at different horizontal positions 
verb(
        < c1
          { s4\ff s4^"text" s4-\marcato s4 }
        >
)
This also works for crescendi, eg,
verb(
        < c1
          { s4\< s2 \! s4 }
        >
)


question(How do I get bar numbers?)

See file(input/test/bar-scripts.ly).


sect(Development)

question(Could you implement feature XXXX? It is really easy, just extend
the syntax to allow YYYY!)

If it is reasonable, I'll add XXXX to the TODO list. In general
finding a cute syntax (such as YYYY) isn't very hard. The complicated
issue how to adapt the internals to do XXXX. The parser is really a
simple front end to the complicated internals. 


question(Can I join in on LilyPond development?  How do I do this?)

LilyPond development is open for anyone who wants to join.  We try
to use a Bazaar style development model for LilyPond, see
lurl(http://locke.ccil.org/~esr/writings/cathedral.html.)  This means:
frequent releases, everyone can send in a patch or do suggestions and
all development discussions are public.

To be precise, discussions take place on the gnu-music-discuss mailing
list, which is open for subscription to everyone.


question(I want to implement XXXX!  Should I do this?)

There might be better ways of doing XXXX, so it's a good thing to
ask about this before you start hacking.  If you want to keep in touch
with current developments, you should subscribe to the mailing list
(see the "links" section of the documentation).


question(Is there a GUI frontend?  Should I start building one?)

LilyPond currently has no graphical interface.  The authors seriously
doubt if a simple-minded approach (dragging and dropping notes) is any
easier or quicker to use than mudela.  But for composing a graphical
environment probably is indispensable.

In any case email(Derek Wyatt)(wyatt@scar.utoronto.edu) is working on
GTK based editor, but that is still in an embryonal stage (see
lurl(http://harmonia.scar.utoronto.ca).  There is also a GUI package
RoseGarden that could be extended to output mudela.

If you want to work on this, please send e-mail to the mailing list
email(gnu-music-discuss@gnu.org).


question(I want to implement XXXX!  How should I do this?)

Your best bet of getting us to include code, is to present it as a
"fait accompli", i.e., to send a patch to the mailing list.


question(I made some code, how do I get you to include it?)

Send in a patch:
verb(
        diff -urN old-file new-file > patch
)
or 
verb(
        diff -urN old-directory/ new-directory/ > patch 
)
Alternatively, you can use issue the command
verb(
        make diff
)

Don't forget to put your name and e-mail address
in the file(AUTHORS.pod) file, or you won't get credits :-]


em(Please) always send a bf(-u) diff, even if it is larger than the
whole file.

question(How do I learn the C++ code?)

The entry point is in code(main()). Good luck. :-)

Seriously, read, reread and reread internals and CodingStyle, and
just start anywhere. 

Anywhere? Well, most of the comment doco are in the header files, so
your best bet would be code(less lily/include/*.hh). Some of the most
important data-structures are to be found in:
verb(
        - *request.hh
        - engraver.hh
        - performer.hh
        - translator.hh
        - score-elem.hh
        - music.hh
        - music-list.hh
        - music-iterator.hh
        - item.hh
        - spanner.hh
)

question(Why GPL?)

Yes.


question(Your make system does not adhere to GNU coding standards, could you
please fix it?)

No.  We have evaluated the standard GNU combination for compiling
programs (autoconf, automake, libtool) and found to be inadequate in
several respects.  More detailed argumentation is included with
LilyPond's generic make package code(StepMake) 
(see file(stepmake-x.x.x/Documentation/automake.urgh))

LilyPond already compiles into a different directory ((the different
directory is called out/, there is one in every source directory).
make distclean essentially reduces to file(rm -f out/*) in every directory

question(gdb crashes when I debug!)

Upgrade to 4.17.

question(Why do I need g++ >= 2.8 / EGCS-1.1 ?)

Supporting more compilers than EGCS/G++ 2.8 is unlikely to make
LilyPond run on more platforms.  It would give us an enormous headache
in detecting and catering for every variant of every compiler: not
having to support other compilers saves us a em(lot) of trouble.


sect(Running)


question(I use dvilj4, and there are lots of warning messages for the
printing)

You should use dvips and ghostscript to print the code(dvi) output:
the slurs and beams are PS code(\special) commands.


question(My symbols are all messed up after I upgraded, I get the
wrong symbols and dvi-checksum errors!)

We obviously mucked with the fonts in the upgrade.  Remove em(all)
previous fonts, including the file(.pk) and file(.tfm) fonts in
file(/var/lib/texmf).  A script automating this has been included, see
file(buildscripts/clean-fonts.sh).

question(all the pk and tfm
fonts are created in the directory where the mudela file is, not in
"/var/spool/texmf" where I think they should be.)

Mats Bengtsson <mats.bengtsson@s3.kth.se> writes:

The simple solution used by Anthony Fok in the Debian distribution of
Lilypond is to link the mf/ directory to
/usr/lib/texmf/fonts/source/public/lilypond Depending on what
distribution of teTeX and Linux you have installed, there might also
be other places like /usr/local/lib/texmf/fonts/source/public/lilypond
or /var/spool/texmf//fonts/source/public/lilypond

Wherever you put it, don't forget to run mktexlsr (or texhash for
older installations) afterwards, so that TeX will find the files.
Also, don't forget to remove all old .tfm and .*pk files when the font
is updated (as it will be in version 1.1.40, for example).

question(Are there scalable versions of the font?)

Yes, they are type-3 fonts.  In the file(mf/) 
subdirectory, issue:
verb(
        make pfa
) in the mf/ subdirectory.  This will also  make file(mfplain) for metapost.
The file(pfa)s will be in the subdirectory file(out/).

question(How does PS output work?)

itemize(
 it()
Generate the PostScript Type-3 fonts. 
it()
Run lilypond with option tt(-f ps):
verb(
    lilypond -fps foo.ly
)
it() To view the file(.ps) output with GhostView, set GS_FONTPATH to the 
directory containing the file(pfa)s, and set GS_LIB to the directory containing the file(.ps) library files of LilyPond.  In the source tree, these are file(mf/out/) and file(ps/).


i.e. do something like:
verb(
   export GS_FONTPATH=$HOME/usr/src/lilypond/mf/out
   export GS_LIB=$HOME/usr/src/lilypond/ps
   gv foo.ps &
)
)

Direct PS output is still experimental.  For creating nice looking ps 
output, use TeX() and code(dvips).

  
question(The beams and slurs are gone if use the XDvi magnifying glass!?)

The beams and slurs are done in PostScript.  XDvi doesn't show
PostScript in the magnifying glass.  Complain to the XDvi maintainers.


question(I don't get midi-output, even if I use bf(-M)!)

Your \score should include a \midi block, eg.
verb(
        \score {
                \melodic { c4 c g g }
                \paper {}       
                \midi {
                        output = "myfile.midi";
                        \tempo 4=70;
                }
        }
)
The bf(-M) option was added to LilyPond because processing the \paper
block is so slow.

question(A lot of musical stuff doesn't make it to the MIDI file, eg.
dynamics, articulation, etc.)

The MIDI output was originally put in as a proof that MIDI could be
done, and as a method of proof"reading" the input.  The MIDI support
is by no means finished.  Patches appreciated.


sect(Copyright)

question(How does copyright for sheet music work? Can I enter and
spread my newly bought Bach urtext?)

Silas S. Brown <ssb22@hermes.cam.ac.uk>:

There are several aspects to sheet music copyright:

1.  The music itself - copyright for the composer's life plus 70 years (so
not applicable to Bach).

2.  If the music is an arrangement, then the arranger holds copyright on
that arrangement.  However, you can produce your own arrangement using
that arrangement as a reference point.  Obviously your arrangement must be
sufficently different to be called your own arrangement - you need to do
more than change one note!

3.  In some countries, the same applies for editions.  This could be
relevant to the Bach example.  If a modern person has edited the music,
then they hold the copyright on the edition.  This does not stop you from
removing the editorial features - remove all editorial slurs, phrasemarks,
ornaments etc and only leave those that you know to be original.  You can
then add some of your own if you want to be your own editor.

4.  If there are lyrics, then the lyricist also holds copyright.  This
does not stop you from using the music without the lyrics if it is
otherwise out of copyright.

5.  The copyright of the printed page is held by the publisher for 30
years after printing (25 in some countries).  This stops you from
photocopying (unless it's "fair use" eg. you're partially sighted and need
to enlarge the music) or otherwise reproducing the typesetting that is
used on it.  But the copyright is only held over the typesetting work, not
the music itself.  Since Mudela specifies the notes, independently of any
typesetting work that went into your reference copy, you are not
duplicating any of the publisher's work.

6.  If you want to violate copyright, there are two main cases where you
may do so: fair use, and with permission.  The former is rather fuzzily
defined, but it includes such things as including small extracts of a
score in a critique, and making a large print or Braille copy for a blind
or partially-sighted performer (many people argue that in this case it
should always be kept with the original copy and/or destroyed after it is
no longer needed).  The latter is obvious: You can always write to the
composer, arranger, editor, lyricist or publisher in question and ask if
you can do whatever it is you're trying to do.  Some will respond more
readily than others, but anything that they say will override any copying 
restrictions imposed on you.


References - best one I know is the UK-based Performing Right Society,
lurl(http://www.prs.co.uk/) (especially "membership") and their links to other
international equivalents.  



Juergen Reuter <reuterj@ira.uka.de>:

[More information can be had at: ]

lurl(http://lcweb.loc.gov/copyright/)
(USA copyright law)

lurl(http://fairuse.stanford.edu/)
(meta site about copyright with many links to other resources)

lurl(http://host.mpa.org/crc.html)
(copyright from the viewpoint of the USA music publishers' association)

lurl(http://www.wipo.int)
(World Intellectual Property Organization (a UNO agency); with
information about international copyright)


John Sankey:

See lurl(http://www.geocities.com/Vienna/Studio/1714/harpsichord.html)
for a summary of copyright relative to old music, also for the
expert forum for such questions.

Werner Lemberg <sx0005@sx2.HRZ.Uni-Dortmund.DE>:

This is not correct.  Urtext editions per se are em(not) copyrighted
-- if you print exactly what the composer has written, how can there
some copyright be added?  Copyrighted are usually only the `Critical
notes', the foreword, and the cadenzas some editors have added.

This means that the `Photocopying forbidden' sign in many scores is
not always correct for e.g. J.S. Bach -- you are allowed to copy the
pages which don't contain editorial stuff which is probably
copyrighted.

A very unfortunate situation for the publishers.



sect(Windows32)

question(I downloaded the windows32 port, and it doesn't match the website!)

The website is usually made from the latest snapshots.  Binary releases,
in particular the windows32 binaries, are only made every once in a while.
They may lag several versions behind the latest version. 

question(But i want a native DOS/Windows-NT/95 port)

Reconsider.  Try Linux.  It's fun!