firmware/export/config-h10_5gb.h

   1 /*
   2  * This config file is for the iriver H10 5/6Gb model
   3  */
   4
   5 #define TARGET_TREE /* this target is using the target tree system */
   6
   7 /* For Rolo and boot loader */
   8 #define MODEL_NUMBER 14
   9 #define MODEL_NAME   "iriver H10 5/6GB"
  10
  11 /* define this if you have recording possibility */
  12 #define HAVE_RECORDING
  13 /* Define bitmask of input sources - recordable bitmask can be defined
  14    explicitly if different */
  15 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
  16
  17 /* define the bitmask of hardware sample rates */
  18 #define HW_SAMPR_CAPS   (SAMPR_CAP_44)
  19
  20 /* define the bitmask of recording sample rates */
  21 #define REC_SAMPR_CAPS  (SAMPR_CAP_44)
  22
  23 /* define this if you have a bitmap LCD display */
  24 #define HAVE_LCD_BITMAP
  25
  26 /* define this if you have a colour LCD */
  27 #define HAVE_LCD_COLOR
  28
  29 /* define this if you want album art for this target */
  30 #define HAVE_ALBUMART
  31
  32 /* define this if you have access to the quickscreen */
  33 #define HAVE_QUICKSCREEN
  34
  35 /* define this if you have access to the pitchscreen */
  36 #define HAVE_PITCHSCREEN
  37
  38 /* define this if you would like tagcache to build on this target */
  39 #define HAVE_TAGCACHE
  40
  41 /* LCD dimensions */
  42 #define LCD_WIDTH  128
  43 #define LCD_HEIGHT 128
  44 #define LCD_DEPTH  16   /* 65536 colours */
  45 #define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */
  46
  47 /*#define IRAM_LCDFRAMEBUFFER IDATA_ATTR*//* put the lcd frame buffer in IRAM */
  48
  49 #define CONFIG_KEYPAD IRIVER_H10_PAD
  50
  51 /* Define this if you do software codec */
  52 #define CONFIG_CODEC SWCODEC
  53
  54 /* define this if you have a real-time clock */
  55 #ifndef BOOTLOADER
  56 #define CONFIG_RTC RTC_E8564
  57 #define HAVE_RTC_ALARM
  58 #endif
  59
  60 /* Define this if you have a software controlled poweroff */
  61 #define HAVE_SW_POWEROFF
  62
  63 /* The number of bytes reserved for loadable codecs */
  64 #define CODEC_SIZE 0x80000
  65
  66 /* The number of bytes reserved for loadable plugins */
  67 #define PLUGIN_BUFFER_SIZE 0x80000
  68
  69 /* Define this if you have the WM8731 audio codec */
  70 #define HAVE_WM8731
  71
  72 /* WM8731 has no tone controls, so we use the software ones */
  73 #define HAVE_SW_TONE_CONTROLS
  74
  75 #define AB_REPEAT_ENABLE 1
  76
  77 /* FM Tuner */
  78 #define CONFIG_TUNER TEA5767
  79 #define CONFIG_TUNER_XTAL  32768
  80
  81 /* Define this for LCD backlight available */
  82 #define HAVE_BACKLIGHT
  83
  84 #define AB_REPEAT_ENABLE 1
  85
  86 #define BATTERY_CAPACITY_DEFAULT 820 /* default battery capacity */
  87 #define BATTERY_CAPACITY_MIN 700  /* min. capacity selectable */
  88 #define BATTERY_CAPACITY_MAX 900 /* max. capacity selectable */
  89 #define BATTERY_CAPACITY_INC 10   /* capacity increment */
  90 #define BATTERY_TYPES_COUNT  1    /* only one type */
  91
  92 /* Hardware controlled charging */
  93 #define CONFIG_CHARGING CHARGING_SIMPLE
  94
  95 /* define this if the unit can be powered or charged via USB */
  96 #define HAVE_USB_POWER
  97
  98 #ifndef SIMULATOR
  99
 100 /* Define this if you have a PortalPlayer PP5020 */
 101 #define CONFIG_CPU PP5020
 102
 103 /* Define this if you want to use the PP5020 i2c interface */
 104 #define CONFIG_I2C I2C_PP5020
 105
 106 /* define this if the hardware can be powered off while charging */
 107 #define HAVE_POWEROFF_WHILE_CHARGING
 108
 109 /* The start address index for ROM builds */
 110 #define ROM_START 0x00000000
 111
 112 /* The size of the flash ROM */
 113 #define FLASH_SIZE 0x100000
 114
 115 /* Define this to the CPU frequency */
 116 /* TODO: this is probably wrong */
 117 #define CPU_FREQ      75000000
 118
 119 /* Type of LCD */
 120 #define CONFIG_LCD LCD_H10_5GB
 121
 122 /* We're able to shut off power to the HDD */
 123 #define HAVE_ATA_POWER_OFF
 124
 125 /* Offset ( in the firmware file's header ) to the file length */
 126 #define FIRMWARE_OFFSET_FILE_LENGTH 0x8
 127
 128 /* Offset ( in the firmware file's header ) to the file CRC and data. These are
 129    only used when loading the old format rockbox.h10 file */
 130 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 131 #define FIRMWARE_OFFSET_FILE_DATA   0x8
 132
 133 /* #define USB_IPODSTYLE */
 134
 135 /* USB On-the-go */
 136 #define CONFIG_USBOTG USBOTG_ARC
 137
 138 /* enable these for the experimental usb stack */
 139 #define HAVE_USBSTACK
 140 #define USB_VENDOR_ID 0x0B70
 141 #define USB_PRODUCT_ID 0x00BA
 142
 143 /* Virtual LED (icon) */
 144 #define CONFIG_LED LED_VIRTUAL
 145
 146 /* Define this if you have adjustable CPU frequency */
 147 #define HAVE_ADJUSTABLE_CPU_FREQ
 148
 149 #define MI4_FORMAT
 150 #define BOOTFILE_EXT    "mi4"
 151 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 152 #define OLD_BOOTFILE    "rockbox.h10"
 153 #define BOOTDIR "/.rockbox"
 154
 155 #define ICODE_ATTR_TREMOR_NOT_MDCT
 156
 157 #endif