firmware/usbstack/usb_serial.c

   1 /***************************************************************************
   2  *             __________               __   ___.
   3  *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
   4  *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
   5  *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
   6  *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
   7  *                     \/            \/     \/    \/            \/
   8  * $Id$
   9  *
  10  * Copyright (C) 2007 by Christian Gmeiner
  11  *
  12  * This program is free software; you can redistribute it and/or
  13  * modify it under the terms of the GNU General Public License
  14  * as published by the Free Software Foundation; either version 2
  15  * of the License, or (at your option) any later version.
  16  *
  17  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  18  * KIND, either express or implied.
  19  *
  20  ****************************************************************************/
  21 #include "string.h"
  22 #include "system.h"
  23 #include "usb_core.h"
  24 #include "usb_drv.h"
  25 #include "kernel.h"
  26 #include "usb_serial.h"
  27 #include "usb_class_driver.h"
  28 //#define LOGF_ENABLE
  29 #include "logf.h"
  30
  31 #ifdef USB_SERIAL
  32
  33 /* serial interface */
  34 static struct usb_interface_descriptor __attribute__((aligned(2)))
  35     interface_descriptor =
  36 {
  37     .bLength            = sizeof(struct usb_interface_descriptor),
  38     .bDescriptorType    = USB_DT_INTERFACE,
  39     .bInterfaceNumber   = 0,
  40     .bAlternateSetting  = 0,
  41     .bNumEndpoints      = 2,
  42     .bInterfaceClass    = USB_CLASS_CDC_DATA,
  43     .bInterfaceSubClass = 0,
  44     .bInterfaceProtocol = 0,
  45     .iInterface         = 0
  46 };
  47
  48
  49 static struct usb_endpoint_descriptor __attribute__((aligned(2)))
  50     endpoint_descriptor =
  51 {
  52     .bLength          = sizeof(struct usb_endpoint_descriptor),
  53     .bDescriptorType  = USB_DT_ENDPOINT,
  54     .bEndpointAddress = 0,
  55     .bmAttributes     = USB_ENDPOINT_XFER_BULK,
  56     .wMaxPacketSize   = 0,
  57     .bInterval        = 0
  58 };
  59
  60 #define BUFFER_SIZE 512
  61 static unsigned char send_buffer[BUFFER_SIZE]
  62     USB_DEVBSS_ATTR __attribute__((aligned(32)));
  63 static unsigned char receive_buffer[32]
  64     USB_DEVBSS_ATTR __attribute__((aligned(32)));
  65
  66 static void sendout(void);
  67
  68 static int buffer_start;
  69 /* The number of bytes to transfer that haven't been given to the USB stack yet */
  70 static int buffer_length;
  71 /* The number of bytes to transfer that have been given to the USB stack */
  72 static int buffer_transitlength;
  73 static bool active = false;
  74
  75 static int ep_in, ep_out;
  76 static int usb_interface;
  77
  78 int usb_serial_request_endpoints(struct usb_class_driver *drv)
  79 {
  80     ep_in = usb_core_request_endpoint(USB_ENDPOINT_XFER_BULK, USB_DIR_IN, drv);
  81     if (ep_in < 0)
  82         return -1;
  83
  84     ep_out = usb_core_request_endpoint(USB_ENDPOINT_XFER_BULK, USB_DIR_OUT,
  85             drv);
  86     if (ep_out < 0) {
  87         usb_core_release_endpoint(ep_in);
  88         return -1;
  89     }
  90
  91     return 0;
  92 }
  93
  94 int usb_serial_set_first_interface(int interface)
  95 {
  96     usb_interface = interface;
  97     return interface + 1;
  98 }
  99
 100 int usb_serial_get_config_descriptor(unsigned char *dest, int max_packet_size)
 101 {
 102     unsigned char *orig_dest = dest;
 103
 104     interface_descriptor.bInterfaceNumber = usb_interface;
 105     PACK_DATA(dest, interface_descriptor);
 106
 107     endpoint_descriptor.wMaxPacketSize = max_packet_size;
 108
 109     endpoint_descriptor.bEndpointAddress = ep_in;
 110     PACK_DATA(dest, endpoint_descriptor);
 111
 112     endpoint_descriptor.bEndpointAddress = ep_out;
 113     PACK_DATA(dest, endpoint_descriptor);
 114
 115     return (dest - orig_dest);
 116 }
 117
 118 /* called by usb_core_control_request() */
 119 bool usb_serial_control_request(struct usb_ctrlrequest* req, unsigned char* dest)
 120 {
 121     bool handled = false;
 122
 123     (void)dest;
 124     switch (req->bRequest) {
 125         default:
 126             logf("serial: unhandeld req %d", req->bRequest);
 127     }
 128     return handled;
 129 }
 130
 131 void usb_serial_init_connection(void)
 132 {
 133     /* prime rx endpoint */
 134     usb_drv_recv(ep_out, receive_buffer, sizeof receive_buffer);
 135
 136     /* we come here too after a bus reset, so reset some data */
 137     buffer_transitlength = 0;
 138     if(buffer_length>0)
 139     {
 140         sendout();
 141     }
 142     active=true;
 143 }
 144
 145 /* called by usb_code_init() */
 146 void usb_serial_init(void)
 147 {
 148     logf("serial: init");
 149     buffer_start = 0;
 150     buffer_length = 0;
 151     buffer_transitlength = 0;
 152     active = true;
 153 }
 154
 155 void usb_serial_disconnect(void)
 156 {
 157     active = false;
 158 }
 159
 160 static void sendout(void)
 161 {
 162     buffer_transitlength = MIN(buffer_length,BUFFER_SIZE-buffer_start);
 163     if(buffer_transitlength > 0)
 164     {
 165         buffer_length -= buffer_transitlength;
 166         usb_drv_send_nonblocking(ep_in, &send_buffer[buffer_start],
 167                 buffer_transitlength);
 168     }
 169 }
 170
 171 void usb_serial_send(unsigned char *data,int length)
 172 {
 173     int freestart, available_end_space, i;
 174
 175     if (!active||length<=0)
 176         return;
 177
 178     i=buffer_start+buffer_length+buffer_transitlength;
 179     freestart=i%BUFFER_SIZE;
 180     available_end_space=BUFFER_SIZE-i;
 181
 182     if (0>=available_end_space)
 183     {
 184         /* current buffer wraps, so new data can't wrap */
 185         int available_space = BUFFER_SIZE -
 186             (buffer_length + buffer_transitlength);
 187
 188         length = MIN(length,available_space);
 189         memcpy(&send_buffer[freestart],data,length);
 190         buffer_length+=length;
 191     }
 192     else
 193     {
 194         /* current buffer doesn't wrap, so new data might */
 195         int first_chunk = MIN(length,available_end_space);
 196
 197         memcpy(&send_buffer[freestart],data,first_chunk);
 198         length-=first_chunk;
 199         buffer_length+=first_chunk;
 200         if(length>0)
 201         {
 202             /* wrap */
 203             memcpy(&send_buffer[0],&data[first_chunk],MIN(length,buffer_start));
 204             buffer_length+=MIN(length,buffer_start);
 205         }
 206     }
 207
 208     if (buffer_transitlength==0)
 209         sendout();
 210     /* else do nothing. The transfer completion handler will pick it up */
 211 }
 212
 213 /* called by usb_core_transfer_complete() */
 214 void usb_serial_transfer_complete(int ep,int dir, int status, int length)
 215 {
 216     (void)ep;
 217     (void)length;
 218
 219     switch (dir) {
 220         case USB_DIR_OUT:
 221             logf("serial: %s", receive_buffer);
 222             /* Data received. TODO : Do something with it ? */
 223
 224             /* Get the next bit */
 225             usb_drv_recv(ep_out, receive_buffer, sizeof receive_buffer);
 226             break;
 227
 228         case USB_DIR_IN:
 229             /* Data sent out. Update circular buffer */
 230             if(status == 0)
 231             {
 232                 /* TODO: Handle (length != buffer_transitlength) */
 233
 234                 buffer_start=(buffer_start+buffer_transitlength)%BUFFER_SIZE;
 235                 buffer_transitlength = 0;
 236             }
 237
 238             if(buffer_length>0)
 239                 sendout();
 240             break;
 241     }
 242 }
 243
 244 #endif /*USB_SERIAL*/