firmware/export/config-ipodnano.h

   1 /*
   2  * This config file is for the Apple iPod Nano
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 #define MODEL_NAME   "Apple iPod Nano 1g"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 4
  12
  13 /* define this if you use an ATA controller */
  14 #define CONFIG_STORAGE STORAGE_ATA
  15
  16 /* define this if you have recording possibility */
  17 #define HAVE_RECORDING
  18
  19 /* Define bitmask of input sources - recordable bitmask can be defined
  20    explicitly if different */
  21 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN)
  22
  23 /* define the bitmask of hardware sample rates */
  24 #define HW_SAMPR_CAPS   (SAMPR_CAP_44)
  25
  26 /* define the bitmask of recording sample rates */
  27 #define REC_SAMPR_CAPS  (SAMPR_CAP_44)
  28
  29 /* define this if you have a bitmap LCD display */
  30 #define HAVE_LCD_BITMAP
  31
  32 /* define this if you have a colour LCD */
  33 #define HAVE_LCD_COLOR
  34
  35 /* define this if you want album art for this target */
  36 #define HAVE_ALBUMART
  37
  38 /* define this if you have access to the quickscreen */
  39 #define HAVE_QUICKSCREEN
  40 /* define this if you have access to the pitchscreen */
  41 #define HAVE_PITCHSCREEN
  42
  43 /* define this if you would like tagcache to build on this target */
  44 #define HAVE_TAGCACHE
  45
  46 /* LCD dimensions */
  47 #define LCD_WIDTH  176
  48 #define LCD_HEIGHT 132
  49 #define LCD_DEPTH  16   /* 65536 colours */
  50 #define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */
  51
  52 #define CONFIG_KEYPAD IPOD_4G_PAD
  53
  54 /* Define this if you do software codec */
  55 #define CONFIG_CODEC SWCODEC
  56
  57 /* define this if you have a real-time clock */
  58 #define CONFIG_RTC RTC_PCF50605
  59
  60 /* Define if the device can wake from an RTC alarm */
  61 #define HAVE_RTC_ALARM
  62
  63 /* Define this if you can switch on/off the accessory power supply */
  64 #define HAVE_ACCESSORY_SUPPLY
  65
  66 /* Define this if you have a software controlled poweroff */
  67 #define HAVE_SW_POWEROFF
  68
  69 /* The number of bytes reserved for loadable codecs */
  70 #define CODEC_SIZE 0x100000
  71
  72 /* The number of bytes reserved for loadable plugins */
  73 #define PLUGIN_BUFFER_SIZE 0x80000
  74
  75 /* Define this if you have the WM8975 audio codec */
  76 #define HAVE_WM8975
  77
  78 #define AB_REPEAT_ENABLE 1
  79 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
  80
  81 /* Define this for LCD backlight available */
  82 #define HAVE_BACKLIGHT
  83 #define HAVE_BACKLIGHT_BRIGHTNESS
  84 /* We can fade the backlight by using PWM */
  85 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
  86
  87 /* Main LCD backlight brightness range and defaults */
  88 #define MIN_BRIGHTNESS_SETTING      1
  89 #define MAX_BRIGHTNESS_SETTING      32
  90 #define DEFAULT_BRIGHTNESS_SETTING  16
  91
  92 /* define this if the unit uses a scrollwheel for navigation */
  93 #define HAVE_SCROLLWHEEL
  94 /* define from which rotation speed [degree/sec] on the acceleration starts */
  95 #define WHEEL_ACCEL_START 270
  96 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
  97 #define WHEEL_ACCELERATION 3
  98
  99 /* Define this if you can detect headphones */
 100 #define HAVE_HEADPHONE_DETECTION
 101
 102 /* define this if you have a flash memory storage */
 103 #define HAVE_FLASH_STORAGE
 104
 105 #define BATTERY_CAPACITY_DEFAULT 300   /* default battery capacity */
 106 #define BATTERY_CAPACITY_MIN     200   /* min. capacity selectable */
 107 #define BATTERY_CAPACITY_MAX     600   /* max. capacity selectable */
 108 #define BATTERY_CAPACITY_INC      20    /* capacity increment */
 109 #define BATTERY_TYPES_COUNT        1   /* only one type */
 110
 111 /* Hardware controlled charging? FIXME */
 112 //#define CONFIG_CHARGING CHARGING_SIMPLE
 113
 114 /* define this if the unit can be powered or charged via USB */
 115 #define HAVE_USB_POWER
 116
 117 #define CURRENT_NORMAL     32  /* MP3: ~9h playback out of 300mAh battery */
 118 #define CURRENT_BACKLIGHT  20  /* FIXME: this needs adjusting */
 119 #if defined(HAVE_RECORDING)
 120 #define CURRENT_RECORD     35  /* FIXME: this needs adjusting */
 121 #endif
 122
 123 #ifndef SIMULATOR
 124
 125 /* Define this if you have a PortalPlayer PP5022 */
 126 #define CONFIG_CPU PP5022
 127
 128 /* Define this if you want to use the PP5020 i2c interface */
 129 #define CONFIG_I2C I2C_PP5020
 130
 131 /* define this if the hardware can be powered off while charging */
 132 //#define HAVE_POWEROFF_WHILE_CHARGING
 133
 134 /* The start address index for ROM builds */
 135 #define ROM_START 0x00000000
 136
 137 /* The size of the flash ROM */
 138 #define FLASH_SIZE 0x100000
 139
 140 /* Define this to the CPU frequency */
 141 #define CPU_FREQ      24000000
 142
 143 #define CONFIG_LCD LCD_IPODNANO
 144
 145 /* Offset ( in the firmware file's header ) to the file length */
 146 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 147
 148 /* Offset ( in the firmware file's header ) to the file CRC */
 149 #define FIRMWARE_OFFSET_FILE_CRC 0
 150
 151 /* Offset ( in the firmware file's header ) to the real data */
 152 #define FIRMWARE_OFFSET_FILE_DATA 8
 153
 154 #define USB_IPODSTYLE
 155
 156 /* USB On-the-go */
 157 #define CONFIG_USBOTG USBOTG_ARC
 158
 159 /* enable these for the experimental usb stack */
 160 #define HAVE_USBSTACK
 161 #define USB_VENDOR_ID 0x05ac
 162 #define USB_PRODUCT_ID 0x120a
 163
 164 /* Virtual LED (icon) */
 165 #define CONFIG_LED LED_VIRTUAL
 166
 167 /* Define this if you have adjustable CPU frequency */
 168 #define HAVE_ADJUSTABLE_CPU_FREQ
 169
 170 /* Define this if you can read an absolute wheel position */
 171 #define HAVE_WHEEL_POSITION
 172
 173 #define BOOTFILE_EXT "ipod"
 174 #define BOOTFILE "rockbox." BOOTFILE_EXT
 175 #define BOOTDIR "/.rockbox"
 176
 177 #define ICODE_ATTR_TREMOR_NOT_MDCT
 178
 179 #define IPOD_ACCESSORY_PROTOCOL
 180
 181 #endif