firmware/export/config-mrobe100.h

   1 /*
   2  * This config file is for the Olympus m:robe MR-100
   3  */
   4
   5 #define TARGET_TREE
   6
   7 /* For Rolo and boot loader */
   8 #define MODEL_NUMBER 23
   9 #define MODEL_NAME   "Olympus m:robe MR-100"
  10
  11 /* define this if you use an ATA controller */
  12 #define CONFIG_STORAGE STORAGE_ATA
  13
  14 /* define this if you have a bitmap LCD display */
  15 #define HAVE_LCD_BITMAP
  16
  17 /* define this if you have access to the quickscreen */
  18 #define HAVE_QUICKSCREEN
  19
  20 /* define this if you have access to the pitchscreen */
  21 #define HAVE_PITCHSCREEN
  22
  23 /* define this if you would like tagcache to build on this target */
  24 #define HAVE_TAGCACHE
  25
  26 /* LCD dimensions */
  27 #define LCD_WIDTH  160
  28 #define LCD_HEIGHT 128
  29 #define LCD_DEPTH  1
  30
  31 #define LCD_PIXELFORMAT VERTICAL_PACKING
  32 #define HAVE_NEGATIVE_LCD /* bright on dark */
  33
  34 /* Display colours, for screenshots and sim (0xRRGGBB) */
  35 #define LCD_DARKCOLOR       0x000000
  36 #define LCD_BRIGHTCOLOR     0x323232
  37 #define LCD_BL_DARKCOLOR    0x5e0202
  38 #define LCD_BL_BRIGHTCOLOR  0xf10603
  39
  40 /* define this if you can flip your LCD */
  41 #define HAVE_LCD_FLIP
  42
  43 /* define this if you can invert the colours on your LCD */
  44 #define HAVE_LCD_INVERT
  45
  46 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
  47
  48 #ifndef BOOTLOADER
  49 /* Define this if you have an remote lcd */
  50 #define HAVE_REMOTE_LCD
  51
  52 #define LCD_REMOTE_WIDTH  79
  53 #define LCD_REMOTE_HEIGHT 16
  54 #define LCD_REMOTE_DEPTH        1
  55 #define LCD_REMOTE_PIXELFORMAT  VERTICAL_PACKING
  56
  57 /* Remote display colours, for screenshots and sim (0xRRGGBB) */
  58 #define LCD_REMOTE_DARKCOLOR       0x000000
  59 #define LCD_REMOTE_BRIGHTCOLOR     0x5a915a
  60 #define LCD_REMOTE_BL_DARKCOLOR    0x000000
  61 #define LCD_REMOTE_BL_BRIGHTCOLOR  0x82b4fa
  62 #endif /* BOOTLOADER */
  63
  64 #define CONFIG_KEYPAD        MROBE100_PAD
  65 #define CONFIG_REMOTE_KEYPAD MROBE_REMOTE
  66
  67 /* Define this to enable morse code input */
  68 #define HAVE_MORSE_INPUT
  69
  70 /* Define this if you do software codec */
  71 #define CONFIG_CODEC SWCODEC
  72
  73 /* define this if you have a real-time clock */
  74 #ifndef BOOTLOADER
  75 #define CONFIG_RTC RTC_MR100
  76 #endif
  77
  78 /* Define this if you have a software controlled poweroff */
  79 #define HAVE_SW_POWEROFF
  80
  81 /* The number of bytes reserved for loadable codecs */
  82 #define CODEC_SIZE 0x100000
  83
  84 /* The number of bytes reserved for loadable plugins */
  85 #define PLUGIN_BUFFER_SIZE 0x80000
  86
  87 /* Wolfsom audio codec */
  88 #define HAVE_WM8751
  89 #define CODEC_SRCTRL_44100HZ     (0x40|(0x11 << 1)|1)
  90
  91 #define AB_REPEAT_ENABLE 1
  92
  93 /* define this if you have a disk storage, i.e. something
  94    that needs spinups and can cause skips when shaked */
  95 #define HAVE_DISK_STORAGE
  96
  97 /* Define this for LCD backlight available */
  98 #define HAVE_BACKLIGHT
  99
 100 /* We can fade the backlight by using PWM */
 101 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
 102
 103 /* Main LCD backlight brightness range and defaults */
 104 #define MIN_BRIGHTNESS_SETTING      1
 105 #define MAX_BRIGHTNESS_SETTING     12
 106 #define DEFAULT_BRIGHTNESS_SETTING  6
 107
 108 /* define this if you have a light associated with the buttons */
 109 #define HAVE_BUTTON_LIGHT
 110
 111 #define HAVE_BUTTONLIGHT_BRIGHTNESS
 112
 113 /* Remote LCD contrast range and defaults */
 114 #define MIN_REMOTE_CONTRAST_SETTING     0
 115 #define MAX_REMOTE_CONTRAST_SETTING     15
 116 #define DEFAULT_REMOTE_CONTRAST_SETTING 8
 117
 118 /* Define this if your LCD can be enabled/disabled */
 119 /* TODO: #define HAVE_LCD_ENABLE */
 120
 121 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
 122  * should be defined as well.
 123  * We can currently put the lcd to sleep but it won't wake up properly */
 124 /*TODO: #define HAVE_LCD_SLEEP*/
 125 /*TODO: #define HAVE_LCD_SLEEP_SETTING <= optional */
 126
 127 #define BATTERY_CAPACITY_DEFAULT 720 /* default battery capacity */
 128
 129 /* Define this if you have a PortalPlayer PP5020 */
 130 #define CONFIG_CPU PP5020
 131
 132 /* Define this if you want to use the PP5020 i2c interface */
 133 #define CONFIG_I2C I2C_PP5020
 134
 135 /* Type of mobile power */
 136 #define CONFIG_BATTERY BATT_LIION750
 137 #define BATTERY_CAPACITY_MIN 750        /* min. capacity selectable */
 138 #define BATTERY_CAPACITY_MAX 750        /* max. capacity selectable */
 139 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 140 #define BATTERY_TYPES_COUNT  1          /* only one type */
 141
 142 /* Hardware controlled charging */
 143 #define CONFIG_CHARGING CHARGING_SIMPLE
 144
 145 /* define this if the hardware can be powered off while charging */
 146 #define HAVE_POWEROFF_WHILE_CHARGING
 147
 148 /* The start address index for ROM builds */
 149 #define ROM_START   0x00000000
 150
 151 /* The size of the flash ROM */
 152 #define FLASH_SIZE  0x100000
 153
 154 /* Define this to the CPU frequency */
 155 #define CPU_FREQ    75000000
 156
 157 /* Type of LCD */
 158 #define CONFIG_LCD  LCD_MROBE100
 159
 160 /* Define this if your LCD can set contrast */
 161 #define HAVE_LCD_CONTRAST
 162
 163 #define MIN_CONTRAST_SETTING        0
 164 #define MAX_CONTRAST_SETTING        40
 165 #define DEFAULT_CONTRAST_SETTING    20
 166
 167
 168 /* We're able to shut off power to the HDD */
 169 #define HAVE_ATA_POWER_OFF
 170
 171 /* USB On-the-go */
 172 #define CONFIG_USBOTG USBOTG_ARC
 173
 174 /* define this if the unit can be powered or charged via USB */
 175 #define HAVE_USB_POWER
 176
 177 /* enable these for the experimental usb stack */
 178 #define HAVE_USBSTACK
 179 #define USE_ROCKBOX_USB
 180 #define USB_VENDOR_ID 0x07B4
 181 #define USB_PRODUCT_ID 0x0280
 182 #define HAVE_USB_HID_MOUSE
 183
 184 /* Define this if you have adjustable CPU frequency */
 185 #define HAVE_ADJUSTABLE_CPU_FREQ
 186
 187 /* Define this if you can detect headphones */
 188 #define HAVE_HEADPHONE_DETECTION
 189
 190 #define MI4_FORMAT
 191 #define BOOTFILE_EXT    "mi4"
 192 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 193 #define BOOTDIR         "/.rockbox"
 194
 195 /* Offset ( in the firmware file's header ) to the file CRC and data.
 196    Not used for the mrobe 100, since it boots an mi4 file, but needed
 197    for compatibility. */
 198 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 199 #define FIRMWARE_OFFSET_FILE_DATA   0x0
 200
 201 #define ICODE_ATTR_TREMOR_NOT_MDCT
 202