firmware/export/config-fuze.h

   1 /*
   2  * This config file is for the Sandisk Sansa Fuze
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 43
   8 #define MODEL_NAME   "Sandisk Sansa Fuze"
   9
  10 #define HW_SAMPR_CAPS       SAMPR_CAP_ALL
  11
  12 /* define this if you have recording possibility */
  13 #define HAVE_RECORDING
  14
  15 #define REC_SAMPR_CAPS      SAMPR_CAP_ALL
  16
  17 /* Default recording levels */
  18 #define DEFAULT_REC_MIC_GAIN    23
  19 #define DEFAULT_REC_LEFT_GAIN   23
  20 #define DEFAULT_REC_RIGHT_GAIN  23
  21
  22 /* Define bitmask of input sources - recordable bitmask can be defined
  23    explicitly if different */
  24 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
  25
  26 /* define this if you have a bitmap LCD display */
  27 #define HAVE_LCD_BITMAP
  28 /* define this if you have a colour LCD */
  29 #define HAVE_LCD_COLOR
  30
  31 #ifndef BOOTLOADER/* define this if you want album art for this target */
  32 #define HAVE_ALBUMART
  33
  34 /* define this to enable bitmap scaling */
  35 #define HAVE_BMP_SCALING
  36
  37 /* define this to enable JPEG decoding */
  38 #define HAVE_JPEG
  39
  40 /* define this if you have a light associated with the buttons */
  41 #define HAVE_BUTTON_LIGHT
  42
  43 /* define this if you have access to the quickscreen */
  44 #define HAVE_QUICKSCREEN
  45
  46 /* define this if you have access to the pitchscreen */
  47 #define HAVE_PITCHSCREEN
  48
  49 /* define this if you would like tagcache to build on this target */
  50 #define HAVE_TAGCACHE
  51
  52 /* define this if you have LCD enable function */
  53 #define HAVE_LCD_ENABLE
  54
  55 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  56    should be defined as well.
  57 #define HAVE_LCD_SLEEP
  58 #define HAVE_LCD_SLEEP_SETTING
  59 */
  60
  61 /* define this if you can flip your LCD */
  62 //#define HAVE_LCD_FLIP
  63
  64 /* define this if you can invert the colours on your LCD */
  65 //#define HAVE_LCD_INVERT
  66
  67
  68 /* define this if you have a real-time clock */
  69 #define CONFIG_RTC RTC_AS3514
  70
  71 /* There is no hardware tone control */
  72 #define HAVE_SW_TONE_CONTROLS
  73
  74 #endif /* !BOOTLOADER */
  75
  76 /* put the lcd frame buffer in IRAM */
  77 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR
  78
  79 #define CONFIG_KEYPAD SANSA_FUZE_PAD
  80
  81 /* Define this to enable morse code input */
  82 #define HAVE_MORSE_INPUT
  83
  84 /* Define this if you do software codec */
  85 #define CONFIG_CODEC SWCODEC
  86
  87
  88 /* LCD dimensions */
  89 #define LCD_WIDTH  220
  90 #define LCD_HEIGHT 176
  91 #define LCD_DEPTH  16   /* 65536 colours */
  92 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  93
  94
  95 /* We're working on the assumption that the AS3525 has something
  96    similar to the AS3514 for audio codec etc */
  97 #define HAVE_AS3514
  98
  99 /* Define this if you have a software controlled poweroff */
 100 #define HAVE_SW_POWEROFF
 101
 102 /* Some Sansa Fuzes seem to be FAT16 formatted */
 103 #define HAVE_FAT16SUPPORT
 104
 105 /* The number of bytes reserved for loadable codecs */
 106 #define CODEC_SIZE 0x100000
 107
 108 /* The number of bytes reserved for loadable plugins */
 109 #define PLUGIN_BUFFER_SIZE 0x80000
 110
 111 #define AB_REPEAT_ENABLE 1
 112
 113 /* FM Tuner - suspected to be the SI4702 */
 114 #define CONFIG_TUNER SI4700
 115 /* #define HAVE_TUNER_PWR_CTRL */
 116
 117 /* Define this for LCD backlight available */
 118 #define HAVE_BACKLIGHT
 119 #define HAVE_BACKLIGHT_BRIGHTNESS
 120
 121 /* Main LCD backlight brightness range and defaults */
 122 #define MIN_BRIGHTNESS_SETTING      1
 123 #define MAX_BRIGHTNESS_SETTING     12
 124 #define DEFAULT_BRIGHTNESS_SETTING  6
 125
 126 /* Which backlight fading type? */
 127 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
 128
 129 /* define this if the unit uses a scrollwheel for navigation */
 130 #define HAVE_SCROLLWHEEL
 131 /* define to activate advanced wheel acceleration code */
 132 #define HAVE_WHEEL_ACCELERATION
 133 /* define from which rotation speed [degree/sec] on the acceleration starts */
 134 #define WHEEL_ACCEL_START 540
 135 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 136 #define WHEEL_ACCELERATION 1
 137
 138 /* define this if you have a flash memory storage */
 139 #define HAVE_FLASH_STORAGE
 140
 141 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
 142 #define CONFIG_STORAGE STORAGE_SD
 143
 144 #define BATTERY_CAPACITY_DEFAULT 550    /* default battery capacity */
 145 #define BATTERY_CAPACITY_MIN 550        /* min. capacity selectable */
 146 #define BATTERY_CAPACITY_MAX 550        /* max. capacity selectable */
 147 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 148 #define BATTERY_TYPES_COUNT  1          /* only one type */
 149
 150 /* Charging implemented in a target-specific algorithm */
 151 #define CONFIG_CHARGING CHARGING_TARGET
 152
 153 /* define this if the unit can be powered or charged via USB */
 154 #define HAVE_USB_POWER
 155
 156 /* Define this if you have an AMS AS3525*/
 157 #define CONFIG_CPU AS3525
 158
 159 /* Define how much SD sectors are reserved for OF */
 160 #define AMS_OF_SIZE 0xF000
 161
 162 /* Define this if you want to use the AS2525 i2c interface */
 163 #define CONFIG_I2C I2C_AS3525
 164
 165 /* Define this to the CPU frequency */
 166 #define CPU_FREQ      250000000
 167
 168 /* Type of LCD */
 169 #define CONFIG_LCD LCD_FUZE
 170
 171 /* Offset ( in the firmware file's header ) to the file CRC and data. These are
 172    only used when loading the old format rockbox.e200 file */
 173 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 174 #define FIRMWARE_OFFSET_FILE_DATA   0x8
 175
 176 #ifndef BOOTLOADER
 177 #define HAVE_MULTIDRIVE
 178 #define NUM_DRIVES 2
 179 #define HAVE_HOTSWAP
 180 #endif
 181
 182 #ifndef BOOTLOADER
 183
 184 #define USB_HANDLED_BY_OF
 185
 186 /* USB On-the-go */
 187 #define CONFIG_USBOTG USBOTG_AS3525
 188
 189 /* enable these for the experimental usb stack */
 190 #define HAVE_USBSTACK
 191 #define USB_VENDOR_ID 0x0781
 192 #define USB_PRODUCT_ID 0x7423
 193
 194 #endif /* !BOOTLOADER */
 195
 196 /* Define this if you have adjustable CPU frequency */
 197 #define HAVE_ADJUSTABLE_CPU_FREQ
 198
 199 #define BOOTFILE_EXT    "sansa"
 200 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 201 #define BOOTDIR "/.rockbox"
 202
 203 #define ICODE_ATTR_TREMOR_NOT_MDCT
 204
 205 #define INCLUDE_TIMEOUT_API
 206