firmware/export/config-ipodmini.h

   1 /*
   2  * This config file is for the Apple iPod Mini (1st Gen)
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 #define MODEL_NAME   "Apple iPod Mini 1g"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 9
  12
  13 /* define this if you use an ATA controller */
  14 #define CONFIG_STORAGE STORAGE_ATA
  15
  16 /* define this if you have recording possibility */
  17 /*#define HAVE_RECORDING*/
  18
  19 /* define the bitmask of hardware sample rates */
  20 #define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  21                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
  22
  23 /* define the bitmask of recording sample rates
  24 #define REC_SAMPR_CAPS  (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  25                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */
  26
  27 /* define this if you have a bitmap LCD display */
  28 #define HAVE_LCD_BITMAP
  29
  30 /* define this if you want album art for this target */
  31 #define HAVE_ALBUMART
  32
  33 /* define this if you can invert the colours on your LCD */
  34 #define HAVE_LCD_INVERT
  35
  36 /* define this if the LCD needs to be shutdown */
  37 #define HAVE_LCD_SHUTDOWN
  38
  39 /* define this if you have access to the quickscreen */
  40 #define HAVE_QUICKSCREEN
  41 /* define this if you have access to the pitchscreen */
  42 #define HAVE_PITCHSCREEN
  43
  44 /* define this if you would like tagcache to build on this target */
  45 #define HAVE_TAGCACHE
  46
  47 /* LCD dimensions */
  48 #define LCD_WIDTH  138
  49 #define LCD_HEIGHT 110
  50 #define LCD_DEPTH  2   /* 4 colours - 2bpp */
  51
  52 #define LCD_PIXELFORMAT HORIZONTAL_PACKING
  53
  54 #define HAVE_LCD_CONTRAST
  55
  56 /* LCD contrast */
  57 #define MIN_CONTRAST_SETTING        5
  58 #define MAX_CONTRAST_SETTING        63
  59 #define DEFAULT_CONTRAST_SETTING    40 /* Match boot contrast */
  60
  61 /* define this if you can flip your LCD */
  62 #define HAVE_LCD_FLIP
  63
  64 #define CONFIG_KEYPAD IPOD_4G_PAD
  65
  66 /* Define this if you do software codec */
  67 #define CONFIG_CODEC SWCODEC
  68
  69 /* define this if you have a real-time clock */
  70 #define CONFIG_RTC RTC_PCF50605
  71
  72 /* Define if the device can wake from an RTC alarm */
  73 #define HAVE_RTC_ALARM
  74
  75 /* Define this if you can switch on/off the accessory power supply */
  76 #define HAVE_ACCESSORY_SUPPLY
  77
  78 /* Define this if you have a software controlled poweroff */
  79 #define HAVE_SW_POWEROFF
  80
  81 /* The number of bytes reserved for loadable codecs */
  82 #define CODEC_SIZE 0x100000
  83
  84 /* The number of bytes reserved for loadable plugins */
  85 #define PLUGIN_BUFFER_SIZE 0x80000
  86
  87 /* Define this if you have the WM8721 audio codec */
  88 #define HAVE_WM8731
  89
  90 /* WM8721 has no tone controls, so we use the software ones */
  91 #define HAVE_SW_TONE_CONTROLS
  92
  93 #define AB_REPEAT_ENABLE 1
  94 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
  95
  96 /* define this if you have a disk storage, i.e. something
  97    that needs spinups and can cause skips when shaked */
  98 #define HAVE_DISK_STORAGE
  99
 100 /* Define this for LCD backlight available */
 101 #define HAVE_BACKLIGHT
 102
 103 /* We can fade the backlight by using PWM */
 104 #define HAVE_BACKLIGHT_PWM_FADING
 105
 106 /* Define this if you can detect headphones */
 107 #define HAVE_HEADPHONE_DETECTION
 108
 109 #define BATTERY_CAPACITY_DEFAULT 400 /* default battery capacity */
 110 #define BATTERY_CAPACITY_MIN 400 /* min. capacity selectable */
 111 #define BATTERY_CAPACITY_MAX 800 /* max. capacity selectable */
 112 #define BATTERY_CAPACITY_INC 10  /* capacity increment */
 113 #define BATTERY_TYPES_COUNT  1   /* only one type */
 114
 115 /* define current usage levels */
 116 #define CURRENT_NORMAL     50  /* PP5024 uses ~40mA, so add some for disk */
 117 #define CURRENT_BACKLIGHT  20  /* FIXME: This needs to be measured */
 118 #define CURRENT_RECORD    110  /* FIXME: Needs to be measured */
 119
 120 /* Hardware controlled charging? */
 121 #define CONFIG_CHARGING CHARGING_MONITOR
 122
 123 /* define this if the unit can be powered or charged via USB */
 124 #define HAVE_USB_POWER
 125
 126 #ifndef SIMULATOR
 127
 128 /* Define this if you have a PortalPlayer PP5020 */
 129 #define CONFIG_CPU PP5020
 130
 131 /* Define this if you want to use the PP5020 i2c interface */
 132 #define CONFIG_I2C I2C_PP5020
 133
 134 /* We're able to shut off power to the HDD */
 135 #define HAVE_ATA_POWER_OFF
 136
 137 /* define this if the hardware can be powered off while charging */
 138 //#define HAVE_POWEROFF_WHILE_CHARGING
 139
 140 /* The start address index for ROM builds */
 141 #define ROM_START 0x00000000
 142
 143 /* The size of the flash ROM */
 144 #define FLASH_SIZE 0x100000
 145
 146 /* Define this to the CPU frequency */
 147 #define CPU_FREQ      11289600
 148
 149 #define CONFIG_LCD LCD_IPODMINI
 150
 151 /* Offset ( in the firmware file's header ) to the file length */
 152 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 153
 154 /* Offset ( in the firmware file's header ) to the file CRC */
 155 #define FIRMWARE_OFFSET_FILE_CRC 0
 156
 157 /* Offset ( in the firmware file's header ) to the real data */
 158 #define FIRMWARE_OFFSET_FILE_DATA 8
 159
 160 #define USB_IPODSTYLE
 161
 162 /* USB On-the-go */
 163 #define CONFIG_USBOTG USBOTG_ARC
 164
 165 /* enable these for the experimental usb stack */
 166 #define HAVE_USBSTACK
 167 #define USB_VENDOR_ID 0x05ac
 168 #define USB_PRODUCT_ID 0x1205
 169
 170 /* Virtual LED (icon) */
 171 #define CONFIG_LED LED_VIRTUAL
 172
 173 /* Define this if you have adjustable CPU frequency */
 174 #define HAVE_ADJUSTABLE_CPU_FREQ
 175
 176 #define BOOTFILE_EXT "ipod"
 177 #define BOOTFILE "rockbox." BOOTFILE_EXT
 178 #define BOOTDIR "/.rockbox"
 179
 180 #define ICODE_ATTR_TREMOR_NOT_MDCT
 181
 182 #endif