firmware/export/config-mrobe100.h

   1 /*
   2  * This config file is for the Olympus m:robe MR-100
   3  */
   4
   5 #define TARGET_TREE
   6
   7 /* For Rolo and boot loader */
   8 #define MODEL_NUMBER 23
   9 #define MODEL_NAME   "Olympus m:robe MR-100"
  10
  11 /* define this if you use an ATA controller */
  12 #define CONFIG_STORAGE STORAGE_ATA
  13
  14 /* define this if you have a bitmap LCD display */
  15 #define HAVE_LCD_BITMAP
  16
  17 /* define this if you have access to the quickscreen */
  18 #define HAVE_QUICKSCREEN
  19
  20 /* define this if you have access to the pitchscreen */
  21 #define HAVE_PITCHSCREEN
  22
  23 /* define this if you would like tagcache to build on this target */
  24 #define HAVE_TAGCACHE
  25
  26 /* LCD dimensions */
  27 #define LCD_WIDTH  160
  28 #define LCD_HEIGHT 128
  29 #define LCD_DEPTH  1
  30
  31 #define LCD_PIXELFORMAT VERTICAL_PACKING
  32 #define HAVE_NEGATIVE_LCD /* bright on dark */
  33
  34 /* Display colours, for screenshots and sim (0xRRGGBB) */
  35 #define LCD_DARKCOLOR       0x000000
  36 #define LCD_BRIGHTCOLOR     0x323232
  37 #define LCD_BL_DARKCOLOR    0x5e0202
  38 #define LCD_BL_BRIGHTCOLOR  0xf10603
  39
  40 /* define this if you can flip your LCD */
  41 #define HAVE_LCD_FLIP
  42
  43 /* define this if you can invert the colours on your LCD */
  44 #define HAVE_LCD_INVERT
  45
  46 /*#define IRAM_LCDFRAMEBUFFER IDATA_ATTR */ /* put the lcd frame buffer in IRAM */
  47
  48 #define CONFIG_KEYPAD MROBE100_PAD
  49
  50 /* Define this if you do software codec */
  51 #define CONFIG_CODEC SWCODEC
  52
  53 /* define this if you have a real-time clock */
  54 #ifndef BOOTLOADER
  55 #define CONFIG_RTC RTC_MR100
  56 #endif
  57
  58 /* Define this if you have a software controlled poweroff */
  59 #define HAVE_SW_POWEROFF
  60
  61 /* The number of bytes reserved for loadable codecs */
  62 #define CODEC_SIZE 0x100000
  63
  64 /* The number of bytes reserved for loadable plugins */
  65 #define PLUGIN_BUFFER_SIZE 0x80000
  66
  67 /* Wolfsom audio codec */
  68 #define HAVE_WM8751
  69 #define CODEC_SRCTRL_44100HZ     (0x40|(0x11 << 1)|1)
  70
  71 #define AB_REPEAT_ENABLE 1
  72
  73 /* define this if you have a disk storage, i.e. something
  74    that needs spinups and can cause skips when shaked */
  75 #define HAVE_DISK_STORAGE
  76
  77 /* Define this for LCD backlight available */
  78 #define HAVE_BACKLIGHT
  79
  80 /* We can fade the backlight by using PWM */
  81 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
  82
  83 /* Main LCD backlight brightness range and defaults */
  84 #define MIN_BRIGHTNESS_SETTING      1
  85 #define MAX_BRIGHTNESS_SETTING     12
  86 #define DEFAULT_BRIGHTNESS_SETTING  6
  87
  88 /* define this if you have a light associated with the buttons */
  89 #define HAVE_BUTTON_LIGHT
  90
  91 #define HAVE_BUTTONLIGHT_BRIGHTNESS
  92
  93 /* Define this if your LCD can be enabled/disabled */
  94 /* TODO: #define HAVE_LCD_ENABLE */
  95
  96 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  97  * should be defined as well.
  98  * We can currently put the lcd to sleep but it won't wake up properly */
  99 /*TODO: #define HAVE_LCD_SLEEP*/
 100 /*TODO: #define HAVE_LCD_SLEEP_SETTING <= optional */
 101
 102 #define BATTERY_CAPACITY_DEFAULT 720 /* default battery capacity */
 103
 104 #ifndef SIMULATOR
 105
 106 /* Define this if you have a PortalPlayer PP5020 */
 107 #define CONFIG_CPU PP5020
 108
 109 /* Define this if you want to use the PP5020 i2c interface */
 110 #define CONFIG_I2C I2C_PP5020
 111
 112 /* Type of mobile power */
 113 #define CONFIG_BATTERY BATT_LIION750
 114 #define BATTERY_CAPACITY_MIN 750        /* min. capacity selectable */
 115 #define BATTERY_CAPACITY_MAX 750        /* max. capacity selectable */
 116 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 117 #define BATTERY_TYPES_COUNT  1          /* only one type */
 118
 119 /* Hardware controlled charging */
 120 #define CONFIG_CHARGING CHARGING_SIMPLE
 121
 122 /* define this if the hardware can be powered off while charging */
 123 #define HAVE_POWEROFF_WHILE_CHARGING
 124
 125 /* The start address index for ROM builds */
 126 #define ROM_START   0x00000000
 127
 128 /* The size of the flash ROM */
 129 #define FLASH_SIZE  0x100000
 130
 131 /* Define this to the CPU frequency */
 132 #define CPU_FREQ    75000000
 133
 134 /* Type of LCD */
 135 #define CONFIG_LCD  LCD_MROBE100
 136
 137 /* Define this if your LCD can set contrast */
 138 #define HAVE_LCD_CONTRAST
 139
 140 #define MIN_CONTRAST_SETTING        0
 141 #define MAX_CONTRAST_SETTING        40
 142 #define DEFAULT_CONTRAST_SETTING    20
 143
 144
 145 /* We're able to shut off power to the HDD */
 146 #define HAVE_ATA_POWER_OFF
 147
 148 /* USB On-the-go */
 149 #define CONFIG_USBOTG USBOTG_ARC
 150
 151 /* define this if the unit can be powered or charged via USB */
 152 #define HAVE_USB_POWER
 153
 154 /* enable these for the experimental usb stack */
 155 #define HAVE_USBSTACK
 156 #define USE_ROCKBOX_USB
 157 #define USB_VENDOR_ID 0x07B4
 158 #define USB_PRODUCT_ID 0x0280
 159
 160 /* Virtual LED (icon) */
 161 #define CONFIG_LED LED_VIRTUAL
 162
 163 /* Define this if you have adjustable CPU frequency */
 164 #define HAVE_ADJUSTABLE_CPU_FREQ
 165
 166 /* Define this if you can detect headphones */
 167 #define HAVE_HEADPHONE_DETECTION
 168
 169 #define MI4_FORMAT
 170 #define BOOTFILE_EXT    "mi4"
 171 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 172 #define BOOTDIR         "/.rockbox"
 173
 174 /* Offset ( in the firmware file's header ) to the file CRC and data.
 175    Not used for the mrobe 100, since it boots an mi4 file, but needed
 176    for compatibility. */
 177 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 178 #define FIRMWARE_OFFSET_FILE_DATA   0x0
 179
 180 #define ICODE_ATTR_TREMOR_NOT_MDCT
 181
 182 #endif