firmware/export/config-gigabeat.h

   1 /*
   2  * This config file is for toshiba Gigabeat F
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define TOSHIBA_GIGABEAT_F 1
   7
   8 #define MODEL_NAME "Toshiba Gigabeat F"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 18
  12
  13 /* define this if you use an ATA controller */
  14 #define HAVE_ATA
  15
  16 /* define this if you have a bitmap LCD display */
  17 #define HAVE_LCD_BITMAP
  18
  19 /* define this if you have a colour LCD */
  20 #define HAVE_LCD_COLOR
  21
  22 /* define this if you want album art for this target */
  23 #define HAVE_ALBUMART
  24
  25 /* define this if you have access to the quickscreen */
  26 #define HAVE_QUICKSCREEN
  27
  28 /* define this if you have access to the pitchscreen */
  29 #define HAVE_PITCHSCREEN
  30
  31 /* define this if you would like tagcache to build on this target */
  32 #define HAVE_TAGCACHE
  33
  34 /* define this if the target has volume keys which can be used in the lists */
  35 #define HAVE_VOLUME_IN_LIST
  36
  37 /* LCD dimensions */
  38 #define LCD_WIDTH  240
  39 #define LCD_HEIGHT 320
  40 #define LCD_DEPTH  16   /* 65k colours */
  41 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  42
  43 #ifndef BOOTLOADER
  44 /* Define this if your LCD can be enabled/disabled */
  45 #define HAVE_LCD_ENABLE
  46
  47 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  48    should be defined as well. */
  49 #define HAVE_LCD_SLEEP
  50 /* We don't use a setting but a fixed delay after the backlight has
  51  * turned off */
  52 #define LCD_SLEEP_TIMEOUT (5*HZ)
  53
  54 #define HAVE_TOUCHPAD_SENSITIVITY_SETTING
  55 #endif /* BOOTLOADER */
  56
  57 #define CONFIG_KEYPAD GIGABEAT_PAD
  58
  59 /* Define this if you do software codec */
  60 #define CONFIG_CODEC SWCODEC
  61
  62 /* define this if you have a real-time clock */
  63 #define CONFIG_RTC RTC_S3C2440
  64
  65 /* Define this for LCD backlight available */
  66 #define HAVE_BACKLIGHT
  67
  68 #define HAVE_BUTTON_LIGHT
  69
  70 #define HAVE_BACKLIGHT_BRIGHTNESS
  71
  72 #define HAVE_BUTTONLIGHT_BRIGHTNESS
  73
  74 /* Main LCD backlight brightness range and defaults */
  75 #define MIN_BRIGHTNESS_SETTING          1   /* 0.5 mA */
  76 #define MAX_BRIGHTNESS_SETTING          12  /* 32 mA */
  77 #define DEFAULT_BRIGHTNESS_SETTING      10  /* 16 mA */
  78
  79 /* Define this if you have a software controlled poweroff */
  80 #define HAVE_SW_POWEROFF
  81
  82 /* The number of bytes reserved for loadable codecs */
  83 #define CODEC_SIZE 0x80000
  84
  85 /* The number of bytes reserved for loadable plugins */
  86 #define PLUGIN_BUFFER_SIZE 0x80000
  87
  88 #define AB_REPEAT_ENABLE 1
  89
  90 /* Define this if you have the WM8975 audio codec */
  91 #define HAVE_WM8751
  92
  93 /* Define this if you want to use the adaptive bass capibility of the 8751 */
  94 /* #define USE_ADAPTIVE_BASS */
  95
  96 #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | \
  97                        SAMPR_CAP_11)
  98
  99 #define HAVE_HEADPHONE_DETECTION
 100
 101 #define BATTERY_CAPACITY_DEFAULT 2000 /* default battery capacity */
 102 #define BATTERY_CAPACITY_MIN 1500        /* min. capacity selectable */
 103 #define BATTERY_CAPACITY_MAX 2500        /* max. capacity selectable */
 104 #define BATTERY_CAPACITY_INC 25         /* capacity increment */
 105 #define BATTERY_TYPES_COUNT  1          /* only one type */
 106
 107 /* Hardware controlled charging with monitoring */
 108 #define CONFIG_CHARGING CHARGING_MONITOR
 109
 110 /* define this if the unit can be powered or charged via USB */
 111 #define HAVE_USB_POWER
 112
 113 #ifndef SIMULATOR
 114
 115 /* The LCD on a Gigabeat is 240x320 - it is portrait */
 116 #define HAVE_PORTRAIT_LCD
 117
 118 #define HAVE_LCD_FLIP
 119
 120 /* Define this if your LCD can set contrast */
 121 #define HAVE_LCD_CONTRAST
 122
 123 #define MIN_CONTRAST_SETTING        0
 124 #define MAX_CONTRAST_SETTING        63
 125 #define DEFAULT_CONTRAST_SETTING    47 /* Match boot contrast */
 126
 127 /* LCD invert - does not currently work */
 128 /* #define HAVE_LCD_INVERT */
 129
 130 /* Define this if you have a Motorola SCF5249 */
 131 #define CONFIG_CPU S3C2440
 132
 133 /* Define this if you want to use coldfire's i2c interface */
 134 #define CONFIG_I2C I2C_S3C2440
 135
 136 /* define this if the hardware can be powered off while charging */
 137 #define HAVE_POWEROFF_WHILE_CHARGING
 138
 139 /* The size of the flash ROM */
 140 #define FLASH_SIZE 0x400000
 141
 142 /* Define this to the CPU frequency */
 143 #define CPU_FREQ 16934400
 144
 145 /* Define this if you have ATA power-off control */
 146 #define HAVE_ATA_POWER_OFF
 147
 148 /* Virtual LED (icon) */
 149 #define CONFIG_LED LED_VIRTUAL
 150
 151 #define CONFIG_LCD LCD_GIGABEAT
 152
 153 /* define this if the backlight can be set to a brightness */
 154 #define HAVE_BACKLIGHT_SET_FADING
 155 #define __BACKLIGHT_INIT
 156
 157 /* Offset ( in the firmware file's header ) to the file CRC */
 158 #define FIRMWARE_OFFSET_FILE_CRC 0
 159
 160 /* Offset ( in the firmware file's header ) to the real data */
 161 #define FIRMWARE_OFFSET_FILE_DATA 8
 162
 163 /* Define this if you have adjustable CPU frequency */
 164 /* #define HAVE_ADJUSTABLE_CPU_FREQ */
 165
 166 #define BOOTFILE_EXT "gigabeat"
 167 #define BOOTFILE "rockbox." BOOTFILE_EXT
 168 #define BOOTDIR "/.rockbox"
 169
 170 #endif