firmware/export/powermgmt.h

   1 /***************************************************************************
   2  *             __________               __   ___.
   3  *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
   4  *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
   5  *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
   6  *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
   7  *                     \/            \/     \/    \/            \/
   8  * $Id$
   9  *
  10  * Copyright (C) 2002 by Heikki Hannikainen, Uwe Freese
  11  *
  12  * This program is free software; you can redistribute it and/or
  13  * modify it under the terms of the GNU General Public License
  14  * as published by the Free Software Foundation; either version 2
  15  * of the License, or (at your option) any later version.
  16  *
  17  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  18  * KIND, either express or implied.
  19  *
  20  ****************************************************************************/
  21 #ifndef _POWERMGMT_H_
  22 #define _POWERMGMT_H_
  23
  24 #include <stdbool.h>
  25
  26 #define POWER_HISTORY_LEN 2*60   /* 2 hours of samples, one per minute */
  27
  28 enum charge_state_type
  29 {
  30     /* sorted by increasing charging current (do not change!) */
  31 #if CONFIG_CHARGING >= CHARGING_MONITOR
  32     CHARGE_STATE_DISABLED = -2, /* Disable charger use (safety measure) */
  33     CHARGE_STATE_ERROR = -1,    /* Some error occurred that should not allow
  34                                    turning on the charger again by software
  35                                    without user intervention (ie. replug) */
  36 #endif
  37     DISCHARGING = 0,
  38 #if CONFIG_CHARGING >= CHARGING_MONITOR
  39     TRICKLE,         /* For NiCd, battery maintenence phase */
  40                      /* For LiIon, low-current precharge phase */
  41     TOPOFF,          /* For NiCd, waiting for dead zone */
  42                      /* For LiIon, constant voltage phase */
  43     CHARGING,        /* For NiCd, main charge phase */
  44                      /* For LiIon, constant current phase */
  45 #endif
  46 };
  47
  48 /* tells what the charger is doing */
  49 extern enum charge_state_type charge_state;
  50
  51 #ifdef CONFIG_CHARGING
  52 /*
  53  * Flag that the charger has been plugged in/removed: this is set for exactly
  54  * one time through the power loop when the charger has been plugged in.
  55  */
  56 enum charger_input_state_type
  57 {
  58     NO_CHARGER = 0,     /* No charger is present */
  59     CHARGER_UNPLUGGED,  /* Transitional state during CHARGER=>NO_CHARGER */
  60     CHARGER_PLUGGED,    /* Transitional state during NO_CHARGER=>CHARGER */
  61     CHARGER             /* Charger is present */
  62 };
  63
  64 /* tells the state of the charge input */
  65 extern enum charger_input_state_type charger_input_state;
  66
  67 /* Power input status saved on the power thread each loop */
  68 extern unsigned int power_thread_inputs;
  69
  70 #endif /* CONFIG_CHARGING */
  71
  72 #if CONFIG_CHARGING == CHARGING_TARGET
  73 /* Include target-specific definitions */
  74 #include "powermgmt-target.h"
  75 #endif
  76
  77 #ifndef SIMULATOR
  78
  79 /* Generic current values that are really rather meaningless - config header
  80  * should define proper numbers. */
  81 #ifndef CURRENT_NORMAL
  82 #define CURRENT_NORMAL    145  /* usual current in mA */
  83 #endif
  84
  85 #ifndef CURRENT_BACKLIGHT
  86 #define CURRENT_BACKLIGHT  30  /* additional current when backlight always on */
  87 #endif
  88
  89 #ifdef HAVE_RECORDING
  90 #ifndef CURRENT_RECORD
  91 #define CURRENT_RECORD     35  /* additional recording current */
  92 #endif
  93 #endif /* HAVE_RECORDING */
  94
  95 #ifndef CURRENT_USB
  96 #define CURRENT_USB       500 /* usual current in mA in USB mode */
  97 #endif
  98
  99 #ifdef HAVE_REMOTE_LCD
 100 #define CURRENT_REMOTE      8  /* additional current when remote connected */
 101 #endif /* HAVE_REMOTE_LCD */
 102
 103 #if CONFIG_CHARGING
 104 #ifndef CURRENT_MAX_CHG
 105 #define CURRENT_MAX_CHG   350  /* maximum charging current */
 106 #endif
 107 #endif /* CONFIG_CHARGING */
 108
 109 #ifdef CHARGING_DEBUG_FILE
 110 #define POWERMGMT_DEBUG_STACK ((0x1000)/sizeof(long))
 111 #else
 112 #define POWERMGMT_DEBUG_STACK 0
 113 #endif
 114
 115 #ifndef BATT_AVE_SAMPLES
 116 /* slw filter constant unless otherwise specified */
 117 #define BATT_AVE_SAMPLES 128
 118 #endif
 119
 120 #ifndef POWER_THREAD_STEP_TICKS
 121 /* 2HZ sample rate unless otherwise specified */
 122 #define POWER_THREAD_STEP_TICKS (HZ/2)
 123 #endif
 124
 125 extern unsigned short power_history[POWER_HISTORY_LEN];
 126 extern const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT];
 127 extern const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT];
 128 extern const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11];
 129 #if CONFIG_CHARGING
 130 extern const unsigned short percent_to_volt_charge[11];
 131 #endif
 132
 133 /* Start up power management thread */
 134 void powermgmt_init(void);
 135
 136 #endif /* SIMULATOR */
 137
 138 /* Returns battery statust */
 139 int battery_level(void); /* percent */
 140 int battery_time(void); /* minutes */
 141 unsigned int battery_adc_voltage(void); /* voltage from ADC in millivolts */
 142 unsigned int battery_voltage(void); /* filtered batt. voltage in millivolts */
 143
 144 #ifdef HAVE_BATTERY_SWITCH
 145 unsigned int input_millivolts(void); /* voltage that device is running from */
 146 #endif /* HAVE_BATTERY_SWITCH */
 147
 148 #if defined(HAVE_BATTERY_SWITCH) || defined(HAVE_RESET_BATTERY_FILTER)
 149 /* Set the filtered battery voltage (to adjust it before beginning a charge
 150  * cycle for instance where old, loaded readings will likely be invalid).
 151  * Also readjust when battery switch is opened or closed.
 152  */
 153 void reset_battery_filter(int millivolts);
 154 #endif /* HAVE_BATTERY_SWITCH || HAVE_RESET_BATTERY_FILTER */
 155
 156
 157 /* read unfiltered battery info */
 158 void battery_read_info(int *voltage, int *level);
 159
 160 /* Tells if the battery level is safe for disk writes */
 161 bool battery_level_safe(void);
 162
 163 void set_poweroff_timeout(int timeout);
 164 void set_battery_capacity(int capacity); /* set local battery capacity value */
 165 int  get_battery_capacity(void); /* get local battery capacity value */
 166 void set_battery_type(int type); /* set local battery type */
 167
 168 void set_sleep_timer(int seconds);
 169 int get_sleep_timer(void);
 170 void set_car_adapter_mode(bool setting);
 171 void reset_poweroff_timer(void);
 172 void cancel_shutdown(void);
 173 void shutdown_hw(void);
 174 void sys_poweroff(void);
 175 /* Returns true if the system should force shutdown for some reason -
 176  * eg. low battery */
 177 bool query_force_shutdown(void);
 178 #ifdef HAVE_ACCESSORY_SUPPLY
 179 void accessory_supply_set(bool);
 180 #endif
 181
 182 #endif /* _POWERMGMT_H_ */