fix remote statusbar not being updated if it is enabled on both displays
[kugel-rb.git] / manual / plugins / alpinecdc.tex
blob8d0fcee74644a78b646140ba9b973295bd618476
1 \subsection{Alpine CD changer emulator}
2 This plugin emulates an Alpine CD changer. It allows to plug the Archos to a
3 compatible head unit and control the playback from there, too. Currently
4 implemented is track change, shuffle, seek, but no disk change. The plugin is a
5 TSR, meaning it silently operates in the background once started. It will keep
6 doing so until a new plugin is started.
7 Alpine also did M-Bus as OEM for other brands (Honda, Acura, Volvo, BMW, etc.)
8 Nowadays Alpine uses a different protocol, called Ai-Net, not supported by this
9 plugin. (As well as all other protocols, please do not ask for such!)
11 \subsubsection{The cable}
12 Hookup to Archos works by connecting the headphone output including the remote
13 pin (you need a 4-ring 3.5 mm plug for that) to the changer jack of the radio.
14 M-Bus radios have a DIN-style circular jack with 8 pins (7 in a $\sim$ 270 degree
15 circle, one in the center). A standard 5-pin DIN plug is OK for this, since we
16 do not use the other (power) pins.
18 As OEM, they shuffled the pins around a bit, better check first if it is not
19 genuine Alpine. The bus pin is pulled high to 12 volts with a $\sim$ 2kOhm resistor,
20 pulses driven low. Because it is open collector, this is not harmful to the
21 Archos.\\
22 ASCII art of the 4-pin headphone plug:
23 \begin{verbatim}
24 / \
25 \_/ left -> Alpine pin 5
26 |_| right -> Alpine pin 4
27 |_| remote -> Alpine pin 1
28 |_| ground -> Alpine pin 2 + 3
29 \end{verbatim}
31 The remote pin can be programmed bidirectional, that is the reason this works.
32 Very luckily the M-Bus uses a single wire communication and the two radios I
33 tried are happy with the 3.3 Volt level the Arcos can deliver. So the
34 connection is a simple cable! For all protocols requiring more lines, an
35 external controller would be necessary.
37 \note{Archos FMs do not have the remote pin internally connected, but
38 one unit that was opened was internally prepared for it, a matter of closing a
39 bridge.}