firmware/export/config-recorder.h

   1 /* define this if you use an ATA controller */
   2 #define CONFIG_STORAGE STORAGE_ATA
   3
   4 #define MODEL_NAME  "Archos Recorder"
   5
   6 /* define this if you have recording possibility */
   7 #define HAVE_RECORDING
   8
   9 /* Define bitmask of input sources - recordable bitmask can be defined
  10    explicitly if different */
  11 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF)
  12
  13 /* define this if you have a bitmap LCD display */
  14 #define HAVE_LCD_BITMAP
  15
  16 /* define this if you can flip your LCD */
  17 #define HAVE_LCD_FLIP
  18
  19 /* define this if you can invert the colours on your LCD */
  20 #define HAVE_LCD_INVERT
  21
  22 /* define this if you have access to the quickscreen */
  23 #define HAVE_QUICKSCREEN
  24 /* define this if you have access to the pitchscreen */
  25 #define HAVE_PITCHSCREEN
  26 /* define this if you have the button bar */
  27 #define HAVE_BUTTONBAR
  28
  29 /* define this if you would like tagcache to build on this target */
  30 #define HAVE_TAGCACHE
  31
  32 /* LCD dimensions */
  33 #define LCD_WIDTH  112
  34 #define LCD_HEIGHT 64
  35 #define LCD_DEPTH  1
  36
  37 #define LCD_PIXEL_ASPECT_WIDTH 4
  38 #define LCD_PIXEL_ASPECT_HEIGHT 5
  39
  40 #define LCD_PIXELFORMAT VERTICAL_PACKING
  41
  42 /* Display colours, for screenshots and sim (0xRRGGBB) */
  43 #define LCD_DARKCOLOR       0x000000
  44 #define LCD_BRIGHTCOLOR     0x5a915a
  45 #define LCD_BL_DARKCOLOR    0x000000
  46 #define LCD_BL_BRIGHTCOLOR  0x7ee57e
  47
  48 /* define this if you have the Recorder's 10-key keyboard */
  49 #define CONFIG_KEYPAD RECORDER_PAD
  50
  51 /* define this if you have a real-time clock */
  52 #define CONFIG_RTC RTC_M41ST84W
  53
  54 /* define this if you have RTC RAM available for settings */
  55 #define HAVE_RTC_RAM
  56
  57 /* The number of bytes reserved for loadable plugins */
  58 #define PLUGIN_BUFFER_SIZE 0x8000
  59
  60 #define AB_REPEAT_ENABLE 1
  61
  62 /* Define this if you have a MAS3587F */
  63 #define CONFIG_CODEC MAS3587F
  64
  65 /* define this if you have a disk storage, i.e. something
  66    that needs spinups and can cause skips when shaked */
  67 #define HAVE_DISK_STORAGE
  68
  69 /* Define this for LCD backlight available */
  70 #define HAVE_BACKLIGHT
  71
  72 #define CONFIG_I2C I2C_PLAYREC
  73
  74 #define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
  75 #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
  76 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
  77 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
  78 #define BATTERY_TYPES_COUNT  1    /* only one type */
  79
  80 /* define this if the unit should not shut down on low battery. */
  81 #define NO_LOW_BATTERY_SHUTDOWN
  82
  83 /* Software controlled charging */
  84 #define CONFIG_CHARGING CHARGING_TARGET
  85
  86 #ifndef SIMULATOR
  87
  88 /* Define this if you have a SH7034 */
  89 #define CONFIG_CPU SH7034
  90
  91 /* Define this if you have ATA power-off control */
  92 #define HAVE_ATA_POWER_OFF
  93
  94 /* Define this to the CPU frequency */
  95 #define CPU_FREQ      11059200
  96
  97 /* Offset ( in the firmware file's header ) to the file length */
  98 #define FIRMWARE_OFFSET_FILE_LENGTH 0
  99
 100 /* Offset ( in the firmware file's header ) to the file CRC */
 101 #define FIRMWARE_OFFSET_FILE_CRC 4
 102
 103 /* Offset ( in the firmware file's header ) to the real data */
 104 #define FIRMWARE_OFFSET_FILE_DATA 6
 105
 106 /* The start address index for ROM builds */
 107 /* #define ROM_START 0x11010 for behind original Archos */
 108 #define ROM_START 0x7010 /* for behind BootBox */
 109
 110 /* Software controlled LED */
 111 #define CONFIG_LED LED_REAL
 112
 113 /* Define this for S/PDIF output available */
 114 #define HAVE_SPDIF_OUT
 115
 116 #define CONFIG_LCD LCD_SSD1815
 117
 118 #define BOOTFILE_EXT "ajz"
 119 #define BOOTFILE "ajbrec." BOOTFILE_EXT
 120 #define BOOTDIR "/"
 121
 122 #endif /* SIMULATOR */
 123
 124 #define HAVE_LCD_CONTRAST
 125
 126 #define MIN_CONTRAST_SETTING        5
 127 #define MAX_CONTRAST_SETTING        63
 128
 129 #define HAVE_SERIAL
 130