firmware/export/config-h10.h

   1 /*
   2  * This config file is for the iriver H10 20Gb
   3  */
   4
   5 #define TARGET_TREE /* this target is using the target tree system */
   6
   7 /* For Rolo and boot loader */
   8 #define MODEL_NUMBER 13
   9 #define MODEL_NAME   "iriver H10 20GB"
  10
  11 /* define this if you use an ATA controller */
  12 #define CONFIG_STORAGE STORAGE_ATA
  13
  14 /* define this if you have recording possibility */
  15 #define HAVE_RECORDING
  16 /* Define bitmask of input sources - recordable bitmask can be defined
  17    explicitly if different */
  18 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
  19
  20 /* define the bitmask of hardware sample rates */
  21 #define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  22                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
  23
  24 /* define the bitmask of recording sample rates */
  25 #define REC_SAMPR_CAPS  (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  26                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
  27
  28 /* define this if you have a bitmap LCD display */
  29 #define HAVE_LCD_BITMAP
  30
  31 /* define this if you have a colour LCD */
  32 #define HAVE_LCD_COLOR
  33
  34 /* define this if you want album art for this target */
  35 #define HAVE_ALBUMART
  36
  37 /* define this if you have access to the quickscreen */
  38 #define HAVE_QUICKSCREEN
  39
  40 /* define this if you have access to the pitchscreen */
  41 #define HAVE_PITCHSCREEN
  42
  43 /* define this if you would like tagcache to build on this target */
  44 #define HAVE_TAGCACHE
  45
  46 /* LCD dimensions */
  47 #define LCD_WIDTH  160
  48 #define LCD_HEIGHT 128
  49 #define LCD_DEPTH  16   /* 65536 colours */
  50 #define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */
  51
  52 #ifndef BOOTLOADER
  53 /* Define this if your LCD can be enabled/disabled */
  54 #define HAVE_LCD_ENABLE
  55
  56 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  57  * should be defined as well.
  58  * We can currently put the lcd to sleep but it won't wake up properly */
  59 #define HAVE_LCD_SLEEP
  60 #define HAVE_LCD_SLEEP_SETTING
  61 #endif
  62
  63 /* define this if you can flip your LCD */
  64 #define HAVE_LCD_FLIP
  65
  66 /* define this if you can invert the colours on your LCD */
  67 #define HAVE_LCD_INVERT
  68
  69 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
  70
  71 #define CONFIG_KEYPAD IRIVER_H10_PAD
  72
  73 /* Define this if you do software codec */
  74 #define CONFIG_CODEC SWCODEC
  75
  76 /* define this if you have a real-time clock */
  77 #ifndef BOOTLOADER
  78 #define CONFIG_RTC RTC_E8564
  79 #define HAVE_RTC_ALARM
  80 #endif
  81
  82 /* define this if you have a disk storage, i.e. something
  83    that needs spinups and can cause skips when shaked */
  84 #define HAVE_DISK_STORAGE
  85
  86 /* Define this if you have a software controlled poweroff */
  87 #define HAVE_SW_POWEROFF
  88
  89 /* The number of bytes reserved for loadable codecs */
  90 #define CODEC_SIZE 0x100000
  91
  92 /* The number of bytes reserved for loadable plugins */
  93 #define PLUGIN_BUFFER_SIZE 0x80000
  94
  95 /* Define this if you have the WM8731 audio codec */
  96 #define HAVE_WM8731
  97
  98 /* WM8731 has no tone controls, so we use the software ones */
  99 #define HAVE_SW_TONE_CONTROLS
 100
 101 #define AB_REPEAT_ENABLE 1
 102
 103 /* FM Tuner */
 104 #define CONFIG_TUNER TEA5767
 105 #define CONFIG_TUNER_XTAL  32768
 106
 107 /* Define this for LCD backlight available */
 108 #define HAVE_BACKLIGHT
 109
 110 #define AB_REPEAT_ENABLE 1
 111
 112 #define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity */
 113 #define BATTERY_CAPACITY_MIN 1500  /* min. capacity selectable */
 114 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
 115 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 116 #define BATTERY_TYPES_COUNT  1    /* only one type */
 117
 118 /* Hardware controlled charging */
 119 #define CONFIG_CHARGING CHARGING_SIMPLE
 120
 121 /* define this if the unit can be powered or charged via USB */
 122 #define HAVE_USB_POWER
 123
 124 #ifndef SIMULATOR
 125
 126 /* Define this if you have a PortalPlayer PP5020 */
 127 #define CONFIG_CPU PP5020
 128
 129 /* Define this if you want to use the PP5020 i2c interface */
 130 #define CONFIG_I2C I2C_PP5020
 131
 132 /* define this if the hardware can be powered off while charging */
 133 #define HAVE_POWEROFF_WHILE_CHARGING
 134
 135 /* The start address index for ROM builds */
 136 #define ROM_START 0x00000000
 137
 138 /* The size of the flash ROM */
 139 #define FLASH_SIZE 0x100000
 140
 141 /* Define this to the CPU frequency */
 142 #define CPU_FREQ      75000000
 143
 144 /* Type of LCD */
 145 #define CONFIG_LCD LCD_H10_20GB
 146
 147 /* Define this if your LCD can set contrast */
 148 #define HAVE_LCD_CONTRAST
 149
 150 #define MIN_CONTRAST_SETTING        0
 151 #define MAX_CONTRAST_SETTING        30
 152 #define DEFAULT_CONTRAST_SETTING    14 /* Match boot contrast */
 153
 154 /* We're able to shut off power to the HDD */
 155 #define HAVE_ATA_POWER_OFF
 156
 157 /* Offset ( in the firmware file's header ) to the file CRC and data. These are
 158    only used when loading the old format rockbox.h10 file */
 159 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 160 #define FIRMWARE_OFFSET_FILE_DATA   0x8
 161
 162 /* USB On-the-go */
 163 #define CONFIG_USBOTG USBOTG_ARC
 164
 165 /* enable these for the experimental usb stack */
 166 #define HAVE_USBSTACK
 167 #define USE_ROCKBOX_USB
 168 #define USB_VENDOR_ID 0x0B70
 169 #define USB_PRODUCT_ID 0x00BA
 170
 171 /* Virtual LED (icon) */
 172 #define CONFIG_LED LED_VIRTUAL
 173
 174 /* Define this if you have adjustable CPU frequency */
 175 #define HAVE_ADJUSTABLE_CPU_FREQ
 176
 177 #define MI4_FORMAT
 178 #define BOOTFILE_EXT    "mi4"
 179 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 180 #define BOOTDIR "/.rockbox"
 181
 182 #define ICODE_ATTR_TREMOR_NOT_MDCT
 183
 184 #endif