firmware/export/config-e200.h

   1 /*
   2  * This config file is for the Sandisk Sansa e200
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 16
   8 #define MODEL_NAME   "Sandisk Sansa e200 series"
   9
  10 #define HW_SAMPR_CAPS       (SAMPR_CAP_44)
  11
  12 /* define this if you have recording possibility */
  13 #define HAVE_RECORDING
  14
  15 #define REC_SAMPR_CAPS      (SAMPR_CAP_22)
  16 #define REC_FREQ_DEFAULT    REC_FREQ_22 /* Default is not 44.1kHz */
  17 #define REC_SAMPR_DEFAULT   SAMPR_22
  18
  19 /* Define bitmask of input sources - recordable bitmask can be defined
  20    explicitly if different */
  21 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
  22
  23 /* define this if you have a bitmap LCD display */
  24 #define HAVE_LCD_BITMAP
  25
  26 /* define this if you have a colour LCD */
  27 #define HAVE_LCD_COLOR
  28
  29 /* define this if you want album art for this target */
  30 #define HAVE_ALBUMART
  31
  32 /* define this if you have a light associated with the buttons */
  33 #define HAVE_BUTTON_LIGHT
  34
  35 /* define this if you have access to the quickscreen */
  36 #define HAVE_QUICKSCREEN
  37
  38 /* define this if you have access to the pitchscreen */
  39 #define HAVE_PITCHSCREEN
  40
  41 /* define this if you would like tagcache to build on this target */
  42 #define HAVE_TAGCACHE
  43
  44 /* LCD dimensions */
  45 #define LCD_WIDTH  176
  46 #define LCD_HEIGHT 220
  47 #define LCD_DEPTH  16   /* 65536 colours */
  48 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  49
  50 #ifndef BOOTLOADER
  51 /* define this if you have LCD enable function */
  52 #define HAVE_LCD_ENABLE
  53
  54 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  55    should be defined as well. */
  56 #define HAVE_LCD_SLEEP
  57 #define HAVE_LCD_SLEEP_SETTING
  58 #endif
  59
  60 /* define this if you can flip your LCD */
  61 #define HAVE_LCD_FLIP
  62
  63 /* define this if you can invert the colours on your LCD */
  64 #define HAVE_LCD_INVERT
  65
  66 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
  67
  68 #define CONFIG_KEYPAD SANSA_E200_PAD
  69
  70 /* Define this if you do software codec */
  71 #define CONFIG_CODEC SWCODEC
  72 /* There is no hardware tone control */
  73 #define HAVE_SW_TONE_CONTROLS
  74 /* The PP5024 has a built-in AustriaMicrosystems AS3514 */
  75 #define HAVE_AS3514
  76
  77 /* define this if you have a real-time clock */
  78 #ifndef BOOTLOADER
  79 #define CONFIG_RTC RTC_AS3514
  80 #endif
  81
  82 /* Define this if you have a software controlled poweroff */
  83 #define HAVE_SW_POWEROFF
  84
  85 /* Some Sansa E200s seem to be FAT16 formatted */
  86 #define HAVE_FAT16SUPPORT
  87
  88 /* The number of bytes reserved for loadable codecs */
  89 #define CODEC_SIZE 0x100000
  90
  91 /* The number of bytes reserved for loadable plugins */
  92 #define PLUGIN_BUFFER_SIZE 0x80000
  93
  94 #define AB_REPEAT_ENABLE 1
  95
  96 /* FM Tuner */
  97 #define CONFIG_TUNER LV24020LP
  98 #define HAVE_TUNER_PWR_CTRL
  99
 100 /* Define this for LCD backlight available */
 101 #define HAVE_BACKLIGHT
 102 #define HAVE_BACKLIGHT_BRIGHTNESS
 103
 104 /* Which backlight fading type? */
 105 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
 106
 107 /* define this if the unit uses a scrollwheel for navigation */
 108 #define HAVE_SCROLLWHEEL
 109 /* define to activate advanced wheel acceleration code */
 110 #define HAVE_WHEEL_ACCELERATION
 111 /* define from which rotation speed [degree/sec] on the acceleration starts */
 112 #define WHEEL_ACCEL_START 540
 113 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 114 #define WHEEL_ACCELERATION 1
 115
 116 /* define this if you have a flash memory storage */
 117 #define HAVE_FLASH_STORAGE
 118
 119 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
 120 #define CONFIG_STORAGE STORAGE_SD
 121
 122 #define BATTERY_CAPACITY_DEFAULT 750    /* default battery capacity */
 123 #define BATTERY_CAPACITY_MIN 750        /* min. capacity selectable */
 124 #define BATTERY_CAPACITY_MAX 750        /* max. capacity selectable */
 125 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 126 #define BATTERY_TYPES_COUNT  1          /* only one type */
 127
 128 /* Charging implemented in a target-specific algorithm */
 129 #define CONFIG_CHARGING CHARGING_TARGET
 130 #define HAVE_POWEROFF_WHILE_CHARGING
 131
 132 /* define current usage levels */
 133 #define CURRENT_NORMAL     30  /* Toni's measurements in Nov 2008  */
 134 #define CURRENT_BACKLIGHT  40  /* Screen is about 20, blue LEDs are another 20, so 40 if both */
 135 #define CURRENT_RECORD     30  /* flash player, so this is just unboosted current*/
 136
 137 /* define this if the unit can be powered or charged via USB */
 138 #define HAVE_USB_POWER
 139
 140 /** Non-simulator section **/
 141 #ifndef SIMULATOR
 142
 143 /* Define this if you have a PortalPlayer PP5024 */
 144 #define CONFIG_CPU PP5024
 145
 146 /* Define this if you want to use the PP5024 i2c interface */
 147 #define CONFIG_I2C I2C_PP5024
 148
 149 /* define this if the hardware can be powered off while charging */
 150 /* Sansa can't be powered off while charging */
 151 /* #define HAVE_POWEROFF_WHILE_CHARGING */
 152
 153 /* The start address index for ROM builds */
 154 #define ROM_START 0x00000000
 155
 156 /* Define this to the CPU frequency */
 157 #define CPU_FREQ      75000000
 158
 159 /* Type of LCD TODO: hopefully the same as the x5 but check this*/
 160 #define CONFIG_LCD LCD_X5
 161
 162 /* Offset ( in the firmware file's header ) to the file CRC and data. These are
 163    only used when loading the old format rockbox.e200 file */
 164 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 165 #define FIRMWARE_OFFSET_FILE_DATA   0x8
 166
 167 #ifndef BOOTLOADER
 168 #define HAVE_MULTIVOLUME
 169 #define HAVE_HOTSWAP
 170 #endif
 171
 172 /* USB On-the-go */
 173 #define CONFIG_USBOTG USBOTG_ARC
 174
 175 /* enable these for the experimental usb stack */
 176 #define HAVE_USBSTACK
 177 #define USE_ROCKBOX_USB
 178 #define USB_VENDOR_ID 0x0781
 179 #define USB_PRODUCT_ID 0x7421
 180
 181 /* Virtual LED (icon) */
 182 #define CONFIG_LED LED_VIRTUAL
 183
 184 /* Define this if you have adjustable CPU frequency */
 185 #define HAVE_ADJUSTABLE_CPU_FREQ
 186
 187 #define MI4_FORMAT
 188 #define BOOTFILE_EXT    "mi4"
 189 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 190 #define BOOTDIR "/.rockbox"
 191
 192 #define ICODE_ATTR_TREMOR_NOT_MDCT
 193
 194 #define INCLUDE_TIMEOUT_API
 195
 196 #endif /* SIMULATOR */
 197
 198 /** Port-specific settings **/
 199
 200 /* Main LCD backlight brightness range and defaults */
 201 #define MIN_BRIGHTNESS_SETTING      1
 202 #define MAX_BRIGHTNESS_SETTING     12
 203 #define DEFAULT_BRIGHTNESS_SETTING  6
 204
 205 /* Default recording levels */
 206 #define DEFAULT_REC_MIC_GAIN    23
 207 #define DEFAULT_REC_LEFT_GAIN   23
 208 #define DEFAULT_REC_RIGHT_GAIN  23
 209
 210 #ifdef E200R_INSTALLER
 211 #define IRAMORIG 0x40004000
 212 #endif
 213