firmware/export/config-mrobe100.h

   1 /*
   2  * This config file is for the Olympus m:robe MR-100
   3  */
   4
   5 #define TARGET_TREE
   6
   7 /* For Rolo and boot loader */
   8 #define MODEL_NUMBER 23
   9 #define MODEL_NAME   "Olympus m:robe MR-100"
  10
  11 /* define this if you use an ATA controller */
  12 #define CONFIG_STORAGE STORAGE_ATA
  13
  14 /* define this if you have a bitmap LCD display */
  15 #define HAVE_LCD_BITMAP
  16
  17 /* define this if you have access to the quickscreen */
  18 #define HAVE_QUICKSCREEN
  19
  20 /* define this if you have access to the pitchscreen */
  21 #define HAVE_PITCHSCREEN
  22
  23 /* define this if you would like tagcache to build on this target */
  24 #define HAVE_TAGCACHE
  25
  26 /* LCD dimensions */
  27 #define LCD_WIDTH  160
  28 #define LCD_HEIGHT 128
  29 #define LCD_DEPTH  1
  30 #define LCD_PIXELFORMAT VERTICAL_PACKING
  31
  32 /* define this if you can flip your LCD */
  33 #define HAVE_LCD_FLIP
  34
  35 /* define this if you can invert the colours on your LCD */
  36 #define HAVE_LCD_INVERT
  37
  38 /*#define IRAM_LCDFRAMEBUFFER IDATA_ATTR */ /* put the lcd frame buffer in IRAM */
  39
  40 #define CONFIG_KEYPAD MROBE100_PAD
  41
  42 /* Define this if you do software codec */
  43 #define CONFIG_CODEC SWCODEC
  44
  45 /* define this if you have a real-time clock */
  46 #ifndef BOOTLOADER
  47 #define CONFIG_RTC RTC_MR100
  48 #endif
  49
  50 /* Define this if you have a software controlled poweroff */
  51 #define HAVE_SW_POWEROFF
  52
  53 /* The number of bytes reserved for loadable codecs */
  54 #define CODEC_SIZE 0x100000
  55
  56 /* The number of bytes reserved for loadable plugins */
  57 #define PLUGIN_BUFFER_SIZE 0x80000
  58
  59 /* Wolfsom audio codec */
  60 #define HAVE_WM8751
  61 #define CODEC_SRCTRL_44100HZ     (0x40|(0x11 << 1)|1)
  62
  63 #define AB_REPEAT_ENABLE 1
  64
  65 /* define this if you have a disk storage, i.e. something
  66    that needs spinups and can cause skips when shaked */
  67 #define HAVE_DISK_STORAGE
  68
  69 /* Define this for LCD backlight available */
  70 #define HAVE_BACKLIGHT
  71
  72 /* We can fade the backlight by using PWM */
  73 #define HAVE_BACKLIGHT_PWM_FADING
  74
  75 /* Main LCD backlight brightness range and defaults */
  76 #define MIN_BRIGHTNESS_SETTING      1
  77 #define MAX_BRIGHTNESS_SETTING     12
  78 #define DEFAULT_BRIGHTNESS_SETTING  6
  79
  80 /* define this if you have a light associated with the buttons */
  81 #define HAVE_BUTTON_LIGHT
  82
  83 #define HAVE_BUTTONLIGHT_BRIGHTNESS
  84
  85 #define BATTERY_CAPACITY_DEFAULT 720 /* default battery capacity */
  86
  87 #ifndef SIMULATOR
  88
  89 /* Define this if you have a PortalPlayer PP5020 */
  90 #define CONFIG_CPU PP5020
  91
  92 /* Define this if you want to use the PP5020 i2c interface */
  93 #define CONFIG_I2C I2C_PP5020
  94
  95 /* Type of mobile power */
  96 #define CONFIG_BATTERY BATT_LIION750
  97 #define BATTERY_CAPACITY_MIN 750        /* min. capacity selectable */
  98 #define BATTERY_CAPACITY_MAX 750        /* max. capacity selectable */
  99 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 100 #define BATTERY_TYPES_COUNT  1          /* only one type */
 101
 102 /* Hardware controlled charging */
 103 #define CONFIG_CHARGING CHARGING_SIMPLE
 104
 105 /* define this if the hardware can be powered off while charging */
 106 #define HAVE_POWEROFF_WHILE_CHARGING
 107
 108 /* The start address index for ROM builds */
 109 #define ROM_START   0x00000000
 110
 111 /* The size of the flash ROM */
 112 #define FLASH_SIZE  0x100000
 113
 114 /* Define this to the CPU frequency */
 115 #define CPU_FREQ    75000000
 116
 117 /* Type of LCD */
 118 #define CONFIG_LCD  LCD_MROBE100
 119
 120 /* Define this if your LCD can set contrast */
 121 #define HAVE_LCD_CONTRAST
 122
 123 #define MIN_CONTRAST_SETTING        0
 124 #define MAX_CONTRAST_SETTING        40
 125 #define DEFAULT_CONTRAST_SETTING    20
 126
 127 /* Define this if your LCD can be enabled/disabled */
 128 /* TODO: #define HAVE_LCD_ENABLE */
 129
 130 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
 131  * should be defined as well.
 132  * We can currently put the lcd to sleep but it won't wake up properly */
 133 /*TODO: #define HAVE_LCD_SLEEP*/
 134 /*TODO: #define HAVE_LCD_SLEEP_SETTING <= optional */
 135
 136 /* We're able to shut off power to the HDD */
 137 #define HAVE_ATA_POWER_OFF
 138
 139 /* #define USB_IPODSTYLE */
 140
 141 /* USB On-the-go */
 142 #define CONFIG_USBOTG USBOTG_ARC
 143
 144 /* define this if the unit can be powered or charged via USB */
 145 #define HAVE_USB_POWER
 146
 147 /* enable these for the experimental usb stack */
 148 #define HAVE_USBSTACK
 149 #define USB_VENDOR_ID 0x07B4
 150 #define USB_PRODUCT_ID 0x0280
 151
 152 /* Virtual LED (icon) */
 153 #define CONFIG_LED LED_VIRTUAL
 154
 155 /* Define this if you have adjustable CPU frequency */
 156 #define HAVE_ADJUSTABLE_CPU_FREQ
 157
 158 /* Define this if you can detect headphones */
 159 #define HAVE_HEADPHONE_DETECTION
 160
 161 #define MI4_FORMAT
 162 #define BOOTFILE_EXT    "mi4"
 163 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 164 #define BOOTDIR         "/.rockbox"
 165
 166 /* Offset ( in the firmware file's header ) to the file CRC and data.
 167    Not used for the mrobe 100, since it boots an mi4 file, but needed
 168    for compatibility. */
 169 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 170 #define FIRMWARE_OFFSET_FILE_DATA   0x0
 171
 172 #define ICODE_ATTR_TREMOR_NOT_MDCT
 173
 174 #endif