firmware/powermgmt.c

   1 /***************************************************************************
   2  *             __________               __   ___.
   3  *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
   4  *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
   5  *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
   6  *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
   7  *                     \/            \/     \/    \/            \/
   8  * $Id$
   9  *
  10  * Copyright (C) 2002 by Heikki Hannikainen, Uwe Freese
  11  * Revisions copyright (C) 2005 by Gerald Van Baren
  12  *
  13  * This program is free software; you can redistribute it and/or
  14  * modify it under the terms of the GNU General Public License
  15  * as published by the Free Software Foundation; either version 2
  16  * of the License, or (at your option) any later version.
  17  *
  18  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  19  * KIND, either express or implied.
  20  *
  21  ****************************************************************************/
  22 #include "config.h"
  23 #include "system.h"
  24 #include "kernel.h"
  25 #include "thread.h"
  26 #include "debug.h"
  27 #include "adc.h"
  28 #include "string.h"
  29 #include "storage.h"
  30 #include "power.h"
  31 #include "audio.h"
  32 #include "mp3_playback.h"
  33 #include "usb.h"
  34 #include "powermgmt.h"
  35 #include "backlight.h"
  36 #include "lcd.h"
  37 #include "rtc.h"
  38 #if CONFIG_TUNER
  39 #include "fmradio.h"
  40 #endif
  41 #include "sound.h"
  42 #ifdef HAVE_LCD_BITMAP
  43 #include "font.h"
  44 #endif
  45 #include "logf.h"
  46 #include "lcd-remote.h"
  47 #ifdef SIMULATOR
  48 #include <time.h>
  49 #endif
  50
  51 #if (defined(IAUDIO_X5) || defined(IAUDIO_M5)) && !defined (SIMULATOR)
  52 #include "lcd-remote-target.h"
  53 #endif
  54 #if (defined(IAUDIO_X5) || defined(IAUDIO_M5) || defined(COWON_D2)) \
  55     && !defined (SIMULATOR)
  56 #include "pcf50606.h"
  57 #endif
  58
  59 /** Shared by sim **/
  60 int last_sent_battery_level = 100;
  61 /* battery level (0-100%) */
  62 int battery_percent = -1;
  63 void send_battery_level_event(void);
  64
  65 #if CONFIG_CHARGING
  66 /* State of the charger input as seen by the power thread */
  67 enum charger_input_state_type charger_input_state;
  68 /* Power inputs as seen by the power thread */
  69 unsigned int power_thread_inputs;
  70 #if CONFIG_CHARGING >= CHARGING_MONITOR
  71 /* Charging state (mode) as seen by the power thread */
  72 enum charge_state_type charge_state = DISCHARGING;
  73 #endif
  74 #endif /* CONFIG_CHARGING */
  75
  76 #ifndef SIMULATOR
  77 static int shutdown_timeout = 0;
  78 /*
  79  * Average battery voltage and charger voltage, filtered via a digital
  80  * exponential filter (aka. exponential moving average, scaled):
  81  * avgbat = y[n] = (N-1)/N*y[n-1] + x[n]. battery_millivolts = y[n] / N.
  82  */
  83 static unsigned int avgbat;
  84 /* filtered battery voltage, millivolts */
  85 static unsigned int battery_millivolts;
  86 /* default value, mAh */
  87 static int battery_capacity = BATTERY_CAPACITY_DEFAULT;
  88
  89
  90 #if BATTERY_TYPES_COUNT > 1
  91 static int battery_type = 0;
  92 #else
  93 #define battery_type 0
  94 #endif
  95
  96 /* Power history: power_history[0] is the newest sample */
  97 unsigned short power_history[POWER_HISTORY_LEN];
  98
  99 #if CONFIG_CPU == JZ4732 /* FIXME! */
 100 static char power_stack[DEFAULT_STACK_SIZE + POWERMGMT_DEBUG_STACK];
 101 #else
 102 static char power_stack[DEFAULT_STACK_SIZE/2 + POWERMGMT_DEBUG_STACK];
 103 #endif
 104 static const char power_thread_name[] = "power";
 105
 106 static int poweroff_timeout = 0;
 107 static int powermgmt_est_runningtime_min = -1;
 108
 109 static bool sleeptimer_active = false;
 110 static long sleeptimer_endtick;
 111
 112 static long last_event_tick;
 113
 114 static int voltage_to_battery_level(int battery_millivolts);
 115 static void battery_status_update(void);
 116 static int runcurrent(void);
 117
 118 void battery_read_info(int *voltage, int *level)
 119 {
 120     int millivolts = battery_adc_voltage();
 121
 122     if (voltage)
 123         *voltage = millivolts;
 124
 125     if (level)
 126         *level = voltage_to_battery_level(millivolts);
 127 }
 128
 129 void reset_poweroff_timer(void)
 130 {
 131     last_event_tick = current_tick;
 132 }
 133
 134 #if BATTERY_TYPES_COUNT > 1
 135 void set_battery_type(int type)
 136 {
 137     if (type != battery_type) {
 138         if ((unsigned)type >= BATTERY_TYPES_COUNT)
 139             type = 0;
 140
 141         battery_type = type;
 142         battery_status_update(); /* recalculate the battery status */
 143     }
 144 }
 145 #endif
 146
 147 void set_battery_capacity(int capacity)
 148 {
 149     if (capacity > BATTERY_CAPACITY_MAX)
 150         capacity = BATTERY_CAPACITY_MAX;
 151     if (capacity < BATTERY_CAPACITY_MIN)
 152         capacity = BATTERY_CAPACITY_MIN;
 153
 154     battery_capacity = capacity;
 155
 156     battery_status_update(); /* recalculate the battery status */
 157 }
 158
 159 int get_battery_capacity(void)
 160 {
 161     return battery_capacity;
 162 }
 163
 164 int battery_time(void)
 165 {
 166     return powermgmt_est_runningtime_min;
 167 }
 168
 169 /* Returns battery level in percent */
 170 int battery_level(void)
 171 {
 172 #ifdef HAVE_BATTERY_SWITCH
 173     if ((power_input_status() & POWER_INPUT_BATTERY) == 0)
 174         return -1;
 175 #endif
 176     return battery_percent;
 177 }
 178
 179 /* Returns filtered battery voltage [millivolts] */
 180 unsigned int battery_voltage(void)
 181 {
 182     return battery_millivolts;
 183 }
 184
 185 /* Tells if the battery level is safe for disk writes */
 186 bool battery_level_safe(void)
 187 {
 188 #if defined(NO_LOW_BATTERY_SHUTDOWN)
 189     return true;
 190 #elif defined(HAVE_BATTERY_SWITCH)
 191     /* Cannot rely upon the battery reading to be valid and the
 192      * device could be powered externally. */
 193     return input_millivolts() > battery_level_dangerous[battery_type];
 194 #else
 195     return battery_millivolts > battery_level_dangerous[battery_type];
 196 #endif
 197 }
 198
 199 void set_poweroff_timeout(int timeout)
 200 {
 201     poweroff_timeout = timeout;
 202 }
 203
 204 void set_sleep_timer(int seconds)
 205 {
 206     if (seconds) {
 207         sleeptimer_active  = true;
 208         sleeptimer_endtick = current_tick + seconds * HZ;
 209     }
 210     else {
 211         sleeptimer_active  = false;
 212         sleeptimer_endtick = 0;
 213     }
 214 }
 215
 216 int get_sleep_timer(void)
 217 {
 218     if (sleeptimer_active)
 219         return (sleeptimer_endtick - current_tick) / HZ;
 220     else
 221         return 0;
 222 }
 223
 224 /* look into the percent_to_volt_* table and get a realistic battery level */
 225 static int voltage_to_percent(int voltage, const short* table)
 226 {
 227     if (voltage <= table[0]) {
 228         return 0;
 229     }
 230     else if (voltage >= table[10]) {
 231         return 100;
 232     }
 233     else {
 234         /* search nearest value */
 235         int i = 0;
 236
 237         while (i < 10 && table[i+1] < voltage)
 238             i++;
 239
 240         /* interpolate linear between the smaller and greater value */
 241         /* Tens digit, 10% per entry,  ones digit: interpolated */
 242         return i*10 + (voltage - table[i])*10 / (table[i+1] - table[i]);
 243     }
 244 }
 245
 246 /* update battery level and estimated runtime, called once per minute or
 247  * when battery capacity / type settings are changed */
 248 static int voltage_to_battery_level(int battery_millivolts)
 249 {
 250     int level;
 251
 252 #if CONFIG_CHARGING >= CHARGING_MONITOR
 253     if (charging_state()) {
 254         /* battery level is defined to be < 100% until charging is finished */
 255         level = voltage_to_percent(battery_millivolts,
 256                                    percent_to_volt_charge);
 257         if (level > 99)
 258             level = 99;
 259     }
 260     else
 261 #endif /* CONFIG_CHARGING >= CHARGING_MONITOR */
 262     {
 263         /* DISCHARGING or error state */
 264         level = voltage_to_percent(battery_millivolts,
 265                                    percent_to_volt_discharge[battery_type]);
 266     }
 267
 268     return level;
 269 }
 270
 271 static void battery_status_update(void)
 272 {
 273     int level = voltage_to_battery_level(battery_millivolts);
 274
 275     /* calculate estimated remaining running time */
 276 #if CONFIG_CHARGING >= CHARGING_MONITOR
 277     if (charging_state()) {
 278         /* charging: remaining charging time */
 279         powermgmt_est_runningtime_min = (100 - level)*battery_capacity*60
 280                 / 100 / (CURRENT_MAX_CHG - runcurrent());
 281     }
 282     else
 283 #endif
 284     /* discharging: remaining running time */
 285     if (battery_millivolts > percent_to_volt_discharge[0][0]) {
 286         /* linear extrapolation */
 287         powermgmt_est_runningtime_min = (level + battery_percent)*60
 288                 * battery_capacity / 200 / runcurrent();
 289     }
 290     if (0 > powermgmt_est_runningtime_min) {
 291         powermgmt_est_runningtime_min = 0;
 292     }
 293
 294     battery_percent = level;
 295     send_battery_level_event();
 296 }
 297
 298 /*
 299  * We shut off in the following cases:
 300  * 1) The unit is idle, not playing music
 301  * 2) The unit is playing music, but is paused
 302  * 3) The battery level has reached shutdown limit
 303  *
 304  * We do not shut off in the following cases:
 305  * 1) The USB is connected
 306  * 2) The charger is connected
 307  * 3) We are recording, or recording with pause
 308  * 4) The radio is playing
 309  */
 310 static void handle_auto_poweroff(void)
 311 {
 312     long timeout = poweroff_timeout*60*HZ;
 313     int audio_stat = audio_status();
 314     long tick = current_tick;
 315
 316 #if CONFIG_CHARGING
 317     /*
 318      * Inhibit shutdown as long as the charger is plugged in.  If it is
 319      * unplugged, wait for a timeout period and then shut down.
 320      */
 321     if (charger_input_state == CHARGER || audio_stat == AUDIO_STATUS_PLAY) {
 322         last_event_tick = current_tick;
 323     }
 324 #endif
 325
 326     if (!shutdown_timeout && query_force_shutdown()) {
 327         backlight_on();
 328         sys_poweroff();
 329     }
 330
 331     if (timeout &&
 332 #if CONFIG_TUNER
 333         !(get_radio_status() & FMRADIO_PLAYING) &&
 334 #endif
 335         !usb_inserted() &&
 336         (audio_stat == 0 ||
 337          (audio_stat == (AUDIO_STATUS_PLAY | AUDIO_STATUS_PAUSE) &&
 338           !sleeptimer_active))) {
 339
 340         if (TIME_AFTER(tick, last_event_tick + timeout) &&
 341             TIME_AFTER(tick, storage_last_disk_activity() + timeout)) {
 342             sys_poweroff();
 343         }
 344     }
 345     else if (sleeptimer_active) {
 346         /* Handle sleeptimer */
 347         if (TIME_AFTER(tick, sleeptimer_endtick)) {
 348             audio_stop();
 349
 350             if (usb_inserted()
 351 #if CONFIG_CHARGING && !defined(HAVE_POWEROFF_WHILE_CHARGING)
 352                 || charger_input_state != NO_CHARGER
 353 #endif
 354             ) {
 355                 DEBUGF("Sleep timer timeout. Stopping...\n");
 356                 set_sleep_timer(0);
 357                 backlight_off(); /* Nighty, nighty... */
 358             }
 359             else {
 360                 DEBUGF("Sleep timer timeout. Shutting off...\n");
 361                 sys_poweroff();
 362             }
 363         }
 364     }
 365 }
 366
 367 /*
 368  * Estimate how much current we are drawing just to run.
 369  */
 370 static int runcurrent(void)
 371 {
 372     int current;
 373
 374 #if MEM == 8 && !(defined(ARCHOS_ONDIOSP) || defined(ARCHOS_ONDIOFM))
 375     /* assuming 192 kbps, the running time is 22% longer with 8MB */
 376     current = CURRENT_NORMAL*100 / 122;
 377 #else
 378     current = CURRENT_NORMAL;
 379 #endif /* MEM == 8 */
 380
 381 #ifndef BOOTLOADER
 382     if (usb_inserted()
 383 #ifdef HAVE_USB_POWER
 384     #if (CURRENT_USB < CURRENT_NORMAL)
 385        || usb_powered()
 386     #else
 387        && !usb_powered()
 388     #endif
 389 #endif
 390     ) {
 391         current = CURRENT_USB;
 392     }
 393
 394 #if defined(HAVE_BACKLIGHT)
 395     if (backlight_get_current_timeout() == 0) /* LED always on */
 396         current += CURRENT_BACKLIGHT;
 397 #endif
 398
 399 #if defined(HAVE_RECORDING) && defined(CURRENT_RECORD)
 400     if (audio_status() & AUDIO_STATUS_RECORD)
 401         current += CURRENT_RECORD;
 402 #endif
 403
 404 #ifdef HAVE_SPDIF_POWER
 405     if (spdif_powered())
 406         current += CURRENT_SPDIF_OUT;
 407 #endif
 408
 409 #ifdef HAVE_REMOTE_LCD
 410     if (remote_detect())
 411         current += CURRENT_REMOTE;
 412 #endif
 413 #endif /* BOOTLOADER */
 414
 415     return current;
 416 }
 417
 418
 419 /* Check to see whether or not we've received an alarm in the last second */
 420 #ifdef HAVE_RTC_ALARM
 421 static void power_thread_rtc_process(void)
 422 {
 423     if (rtc_check_alarm_flag())
 424         rtc_enable_alarm(false);
 425 }
 426 #endif
 427
 428 /* switch off unit if battery level is too low for reliable operation */
 429 bool query_force_shutdown(void)
 430 {
 431 #if defined(NO_LOW_BATTERY_SHUTDOWN)
 432     return false;
 433 #elif defined(HAVE_BATTERY_SWITCH)
 434     /* Cannot rely upon the battery reading to be valid and the
 435      * device could be powered externally. */
 436     return input_millivolts() < battery_level_shutoff[battery_type];
 437 #else
 438     return battery_millivolts < battery_level_shutoff[battery_type];
 439 #endif
 440 }
 441
 442 #if defined(HAVE_BATTERY_SWITCH) || defined(HAVE_RESET_BATTERY_FILTER)
 443 /*
 444  * Reset the battery voltage filter to a new value and update the
 445  * status.
 446  */
 447 void reset_battery_filter(int millivolts)
 448 {
 449     avgbat = millivolts * BATT_AVE_SAMPLES;
 450     battery_millivolts = millivolts;
 451     battery_status_update();
 452 }
 453 #endif /* HAVE_BATTERY_SWITCH */
 454
 455 /** Generic charging algorithms for common charging types **/
 456 #if CONFIG_CHARGING == 0 || CONFIG_CHARGING == CHARGING_SIMPLE
 457 static inline void powermgmt_init_target(void)
 458 {
 459     /* Nothing to do */
 460 }
 461
 462 static inline void charging_algorithm_step(void)
 463 {
 464     /* Nothing to do */
 465 }
 466
 467 static inline void charging_algorithm_close(void)
 468 {
 469     /* Nothing to do */
 470 }
 471 #elif CONFIG_CHARGING == CHARGING_MONITOR
 472 /*
 473  * Monitor CHARGING/DISCHARGING state.
 474  */
 475 static inline void powermgmt_init_target(void)
 476 {
 477     /* Nothing to do */
 478 }
 479
 480 static inline void charging_algorithm_step(void)
 481 {
 482     switch (charger_input_state)
 483     {
 484     case CHARGER_PLUGGED:
 485     case CHARGER:
 486         if (charging_state()) {
 487             charge_state = CHARGING;
 488             break;
 489         }
 490     /* Fallthrough */
 491     case CHARGER_UNPLUGGED:
 492     case NO_CHARGER:
 493         charge_state = DISCHARGING;
 494         break;
 495     }
 496 }
 497
 498 static inline void charging_algorithm_close(void)
 499 {
 500     /* Nothing to do */
 501 }
 502 #endif /* CONFIG_CHARGING == * */
 503
 504 #if CONFIG_CHARGING
 505 /* Shortcut function calls - compatibility, simplicity. */
 506
 507 /* Returns true if any power input is capable of charging. */
 508 bool charger_inserted(void)
 509 {
 510     return power_thread_inputs & POWER_INPUT_CHARGER;
 511 }
 512
 513 /* Returns true if any power input is connected - charging-capable
 514  * or not. */
 515 bool power_input_present(void)
 516 {
 517     return power_thread_inputs & POWER_INPUT;
 518 }
 519
 520 /*
 521  * Detect charger inserted. Return true if the state is transistional.
 522  */
 523 static inline bool detect_charger(unsigned int pwr)
 524 {
 525     /*
 526      * Detect charger plugged/unplugged transitions.  On a plugged or
 527      * unplugged event, we return immediately, run once through the main
 528      * loop (including the subroutines), and end up back here where we
 529      * transition to the appropriate steady state charger on/off state.
 530      */
 531     if (pwr & POWER_INPUT_CHARGER) {
 532         switch (charger_input_state)
 533         {
 534         case NO_CHARGER:
 535         case CHARGER_UNPLUGGED:
 536             charger_input_state = CHARGER_PLUGGED;
 537             break;
 538
 539         case CHARGER_PLUGGED:
 540             queue_broadcast(SYS_CHARGER_CONNECTED, 0);
 541             last_sent_battery_level = 0;
 542             charger_input_state = CHARGER;
 543             break;
 544
 545         case CHARGER:
 546             /* Steady state */
 547             return false;
 548         }
 549     }
 550     else {    /* charger not inserted */
 551         switch (charger_input_state)
 552         {
 553         case NO_CHARGER:
 554             /* Steady state */
 555             return false;
 556
 557         case CHARGER_UNPLUGGED:
 558             queue_broadcast(SYS_CHARGER_DISCONNECTED, 0);
 559             last_sent_battery_level = 100;
 560             charger_input_state = NO_CHARGER;
 561             break;
 562
 563         case CHARGER_PLUGGED:
 564         case CHARGER:
 565             charger_input_state = CHARGER_UNPLUGGED;
 566             break;
 567         }
 568     }
 569
 570     /* Transitional state */
 571     return true;
 572 }
 573 #endif /* CONFIG_CHARGING */
 574
 575 /*
 576  * Monitor the presence of a charger and perform critical frequent steps
 577  * such as running the battery voltage filter.
 578  */
 579 static inline void power_thread_step(void)
 580 {
 581     /* If the power off timeout expires, the main thread has failed
 582        to shut down the system, and we need to force a power off */
 583     if (shutdown_timeout) {
 584         shutdown_timeout -= POWER_THREAD_STEP_TICKS;
 585
 586         if (shutdown_timeout <= 0)
 587             power_off();
 588     }
 589
 590 #ifdef HAVE_RTC_ALARM
 591     power_thread_rtc_process();
 592 #endif
 593
 594     /*
 595      * Do a digital exponential filter.  We don't sample the battery if
 596      * the disk is spinning unless we are in USB mode (the disk will most
 597      * likely always be spinning in USB mode) or charging.
 598      */
 599     if (!storage_disk_is_active() || usb_inserted()
 600 #if CONFIG_CHARGING >= CHARGING_MONITOR
 601             || charger_input_state == CHARGER
 602 #endif
 603     ) {
 604         avgbat += battery_adc_voltage() - avgbat / BATT_AVE_SAMPLES;
 605         /*
 606          * battery_millivolts is the millivolt-scaled filtered battery value.
 607          */
 608         battery_millivolts = avgbat / BATT_AVE_SAMPLES;
 609
 610         /* update battery status every time an update is available */
 611         battery_status_update();
 612     }
 613     else if (battery_percent < 8) {
 614         /*
 615          * If battery is low, observe voltage during disk activity.
 616          * Shut down if voltage drops below shutoff level and we are not
 617          * using NiMH or Alkaline batteries.
 618          */
 619         battery_millivolts = (battery_adc_voltage() +
 620                               battery_millivolts + 1) / 2;
 621
 622         /* update battery status every time an update is available */
 623         battery_status_update();
 624
 625         if (!shutdown_timeout && query_force_shutdown()) {
 626             sys_poweroff();
 627         }
 628         else {
 629             avgbat += battery_millivolts - avgbat / BATT_AVE_SAMPLES;
 630         }
 631     }
 632 } /* power_thread_step */
 633
 634 static void power_thread(void)
 635 {
 636     long next_power_hist;
 637
 638     /* Delay reading the first battery level */
 639 #ifdef MROBE_100
 640     while (battery_adc_voltage() > 4200) /* gives false readings initially */
 641 #endif
 642     {
 643         sleep(HZ/100);
 644     }
 645
 646 #if CONFIG_CHARGING
 647     /* Initialize power input status before calling other routines. */
 648     power_thread_inputs = power_input_status();
 649 #endif
 650
 651     /* initialize the voltages for the exponential filter */
 652     avgbat = battery_adc_voltage() + 15;
 653
 654 #ifdef HAVE_DISK_STORAGE /* this adjustment is only needed for HD based */
 655     /* The battery voltage is usually a little lower directly after
 656        turning on, because the disk was used heavily. Raise it by 5% */
 657 #if CONFIG_CHARGING
 658     if (!charger_inserted()) /* only if charger not connected */
 659 #endif
 660     {
 661         avgbat += (percent_to_volt_discharge[battery_type][6] -
 662                    percent_to_volt_discharge[battery_type][5]) / 2;
 663     }
 664 #endif /* HAVE_DISK_STORAGE */
 665
 666     avgbat = avgbat * BATT_AVE_SAMPLES;
 667     battery_millivolts = avgbat / BATT_AVE_SAMPLES;
 668     power_history[0] = battery_millivolts;
 669
 670 #if CONFIG_CHARGING
 671     if (charger_inserted()) {
 672         battery_percent = voltage_to_percent(battery_millivolts,
 673                             percent_to_volt_charge);
 674     }
 675     else
 676 #endif
 677     {
 678         battery_percent = voltage_to_percent(battery_millivolts,
 679                             percent_to_volt_discharge[battery_type]);
 680         battery_percent += battery_percent < 100;
 681     }
 682
 683     powermgmt_init_target();
 684
 685     next_power_hist = current_tick + HZ*60;
 686
 687     while (1)
 688     {
 689 #if CONFIG_CHARGING
 690         unsigned int pwr = power_input_status();
 691 #ifdef HAVE_BATTERY_SWITCH
 692         if ((pwr ^ power_thread_inputs) & POWER_INPUT_BATTERY) {
 693             sleep(HZ/10);
 694             reset_battery_filter(battery_adc_voltage());
 695         }
 696 #endif
 697         power_thread_inputs = pwr;
 698
 699         if (!detect_charger(pwr))
 700 #endif /* CONFIG_CHARGING */
 701         {
 702             /* Steady state */
 703             sleep(POWER_THREAD_STEP_TICKS);
 704
 705             /* Do common power tasks */
 706             power_thread_step();
 707         }
 708
 709         /* Perform target tasks */
 710         charging_algorithm_step();
 711
 712         if (TIME_BEFORE(current_tick, next_power_hist))
 713             continue;
 714
 715         /* increment to ensure there is a record for every minute
 716          * rather than go forward from the current tick */
 717         next_power_hist += HZ*60;
 718
 719         /* rotate the power history */
 720         memmove(&power_history[1], &power_history[0],
 721                 sizeof(power_history) - sizeof(power_history[0]));
 722
 723         /* insert new value at the start, in millivolts 8-) */
 724         power_history[0] = battery_millivolts;
 725
 726         handle_auto_poweroff();
 727     }
 728 } /* power_thread */
 729
 730 void powermgmt_init(void)
 731 {
 732     /* init history to 0 */
 733     memset(power_history, 0, sizeof(power_history));
 734     create_thread(power_thread, power_stack, sizeof(power_stack), 0,
 735                   power_thread_name IF_PRIO(, PRIORITY_SYSTEM)
 736                   IF_COP(, CPU));
 737 }
 738
 739 /* Various hardware housekeeping tasks relating to shutting down the player */
 740 void shutdown_hw(void)
 741 {
 742     charging_algorithm_close();
 743     audio_stop();
 744
 745     if (battery_level_safe()) { /* do not save on critical battery */
 746 #ifdef HAVE_LCD_BITMAP
 747       glyph_cache_save(NULL);
 748 #endif
 749
 750 /* Commit pending writes if needed. Even though we don't do write caching,
 751    things like flash translation layers may need this to commit scattered
 752    pages to there final locations. So far only used for iPod Nano 2G. */
 753 #ifdef HAVE_STORAGE_FLUSH
 754         storage_flush();
 755 #endif
 756
 757         if (storage_disk_is_active())
 758             storage_spindown(1);
 759     }
 760
 761     while (storage_disk_is_active())
 762         sleep(HZ/10);
 763
 764 #if CONFIG_CODEC == SWCODEC
 765     audiohw_close();
 766 #else
 767     mp3_shutdown();
 768 #endif
 769
 770     /* If HD is still active we try to wait for spindown, otherwise the
 771        shutdown_timeout in power_thread_step will force a power off */
 772     while (storage_disk_is_active())
 773         sleep(HZ/10);
 774
 775 #ifndef HAVE_LCD_COLOR
 776     lcd_set_contrast(0);
 777 #endif
 778 #ifdef HAVE_REMOTE_LCD
 779     lcd_remote_set_contrast(0);
 780 #endif
 781 #ifdef HAVE_LCD_SHUTDOWN
 782     lcd_shutdown();
 783 #endif
 784
 785     /* Small delay to make sure all HW gets time to flush. Especially
 786        eeprom chips are quite slow and might be still writing the last
 787        byte. */
 788     sleep(HZ/4);
 789     power_off();
 790 }
 791
 792 void sys_poweroff(void)
 793 {
 794 #ifndef BOOTLOADER
 795     logf("sys_poweroff()");
 796     /* If the main thread fails to shut down the system, we will force a
 797        power off after an 20 second timeout - 28 seconds if recording */
 798     if (shutdown_timeout == 0) {
 799 #if defined(IAUDIO_X5) || defined(IAUDIO_M5) || defined(COWON_D2)
 800         pcf50606_reset_timeout(); /* Reset timer on first attempt only */
 801 #endif
 802 #ifdef HAVE_RECORDING
 803         if (audio_status() & AUDIO_STATUS_RECORD)
 804             shutdown_timeout += HZ*8;
 805 #endif
 806 #ifdef IPOD_NANO2G
 807         /* The FTL alone may take half a minute to shut down cleanly. */
 808         shutdown_timeout += HZ*60;
 809 #else
 810         shutdown_timeout += HZ*20;
 811 #endif
 812     }
 813
 814     queue_broadcast(SYS_POWEROFF, 0);
 815 #endif /* BOOTLOADER */
 816 }
 817
 818 void cancel_shutdown(void)
 819 {
 820     logf("cancel_shutdown()");
 821
 822 #if defined(IAUDIO_X5) || defined(IAUDIO_M5) || defined(COWON_D2)
 823     /* TODO: Move some things to target/ tree */
 824     if (shutdown_timeout)
 825         pcf50606_reset_timeout();
 826 #endif
 827
 828     shutdown_timeout = 0;
 829 }
 830 #endif /* SIMULATOR */
 831
 832 /* Send system battery level update events on reaching certain significant
 833    levels. This must be called after battery_percent has been updated. */
 834 void send_battery_level_event(void)
 835 {
 836     static const int levels[] = { 5, 15, 30, 50, 0 };
 837     const int *level = levels;
 838
 839     while (*level)
 840     {
 841         if (battery_percent <= *level && last_sent_battery_level > *level) {
 842             last_sent_battery_level = *level;
 843             queue_broadcast(SYS_BATTERY_UPDATE, last_sent_battery_level);
 844             break;
 845         }
 846
 847         level++;
 848     }
 849 }