Make the midiplugin's out of memory error more obvious to people who don't know what...
[kugel-rb.git] / apps / gui / pitchscreen.c
blob5f987cb5d48c9449e8c7a0ad02e88778b3eadd32
1 /***************************************************************************
2 * __________ __ ___.
3 * Open \______ \ ____ ____ | | _\_ |__ _______ ___
4 * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5 * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6 * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7 * \/ \/ \/ \/ \/
8 * $Id$
10 * Copyright (C) 2002 Björn Stenberg
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version 2
15 * of the License, or (at your option) any later version.
17 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18 * KIND, either express or implied.
20 ****************************************************************************/
22 #include <stdbool.h>
23 #include <string.h>
24 #include <stdio.h>
25 #include <math.h>
26 #include <stdlib.h> /* for abs() */
27 #include "config.h"
28 #include "action.h"
29 #include "dsp.h"
30 #include "sound.h"
31 #include "pcmbuf.h"
32 #include "lang.h"
33 #include "icons.h"
34 #include "screens.h"
35 #include "viewport.h"
36 #include "font.h"
37 #include "system.h"
38 #include "misc.h"
39 #include "pitchscreen.h"
40 #include "settings.h"
41 #if CONFIG_CODEC == SWCODEC
42 #include "tdspeed.h"
43 #endif
45 #define ICON_BORDER 12 /* icons are currently 7x8, so add ~2 pixels */
46 /* on both sides when drawing */
48 #define PITCH_MAX (200 * PITCH_SPEED_PRECISION)
49 #define PITCH_MIN (50 * PITCH_SPEED_PRECISION)
50 #define PITCH_SMALL_DELTA (PITCH_SPEED_PRECISION / 10) /* .1% */
51 #define PITCH_BIG_DELTA (PITCH_SPEED_PRECISION) /* 1% */
52 #define PITCH_NUDGE_DELTA (2 * PITCH_SPEED_PRECISION) /* 2% */
54 #define SPEED_SMALL_DELTA (PITCH_SPEED_PRECISION / 10) /* .1% */
55 #define SPEED_BIG_DELTA (PITCH_SPEED_PRECISION) /* 1% */
57 #define SEMITONE_SMALL_DELTA (PITCH_SPEED_PRECISION / 10) /* 10 cents */
58 #define SEMITONE_BIG_DELTA PITCH_SPEED_PRECISION /* 1 semitone */
60 enum
62 PITCH_TOP = 0,
63 PITCH_MID,
64 PITCH_BOTTOM,
65 PITCH_ITEM_COUNT,
69 /* This is a table of semitone percentage values of the appropriate
70 precision (based on PITCH_SPEED_PRECISION). Note that these are
71 all constant expressions, which will be evaluated at compile time,
72 so no need to worry about how complex the expressions look.
73 That's just to get the precision right.
75 I calculated these values, starting from 50, as
77 x(n) = 50 * 2^(n/12)
79 All that math in each entry simply converts the float constant
80 to an integer equal to PITCH_SPEED_PRECISION times the float value,
81 with as little precision loss as possible (i.e. correctly rounding
82 the last digit).
84 #define TO_INT_WITH_PRECISION(x) \
85 ( (unsigned short)(((x) * PITCH_SPEED_PRECISION * 10 + 5) / 10) )
87 static const unsigned short semitone_table[] =
89 TO_INT_WITH_PRECISION(50.00000000), /* Octave lower */
90 TO_INT_WITH_PRECISION(52.97315472),
91 TO_INT_WITH_PRECISION(56.12310242),
92 TO_INT_WITH_PRECISION(59.46035575),
93 TO_INT_WITH_PRECISION(62.99605249),
94 TO_INT_WITH_PRECISION(66.74199271),
95 TO_INT_WITH_PRECISION(70.71067812),
96 TO_INT_WITH_PRECISION(74.91535384),
97 TO_INT_WITH_PRECISION(79.37005260),
98 TO_INT_WITH_PRECISION(84.08964153),
99 TO_INT_WITH_PRECISION(89.08987181),
100 TO_INT_WITH_PRECISION(94.38743127),
101 TO_INT_WITH_PRECISION(100.0000000), /* Normal sound */
102 TO_INT_WITH_PRECISION(105.9463094),
103 TO_INT_WITH_PRECISION(112.2462048),
104 TO_INT_WITH_PRECISION(118.9207115),
105 TO_INT_WITH_PRECISION(125.9921049),
106 TO_INT_WITH_PRECISION(133.4839854),
107 TO_INT_WITH_PRECISION(141.4213562),
108 TO_INT_WITH_PRECISION(149.8307077),
109 TO_INT_WITH_PRECISION(158.7401052),
110 TO_INT_WITH_PRECISION(168.1792831),
111 TO_INT_WITH_PRECISION(178.1797436),
112 TO_INT_WITH_PRECISION(188.7748625),
113 TO_INT_WITH_PRECISION(200.0000000) /* Octave higher */
116 #define NUM_SEMITONES ((int)(sizeof(semitone_table)/sizeof(semitone_table[0])))
117 #define SEMITONE_END (NUM_SEMITONES/2)
118 #define SEMITONE_START (-SEMITONE_END)
120 /* A table of values for approximating the cent curve with
121 linear interpolation. Multipy the next lowest semitone
122 by this much to find the corresponding cent percentage.
124 These values were calculated as
125 x(n) = 100 * 2^(n * 20/1200)
128 static const unsigned short cent_interp[] =
130 TO_INT_WITH_PRECISION(100.0000000),
131 TO_INT_WITH_PRECISION(101.1619440),
132 TO_INT_WITH_PRECISION(102.3373892),
133 TO_INT_WITH_PRECISION(103.5264924),
134 TO_INT_WITH_PRECISION(104.7294123),
135 /* this one's the next semitone but we have it here for convenience */
136 TO_INT_WITH_PRECISION(105.9463094),
139 /* Number of cents between entries in the cent_interp table */
140 #define CENT_INTERP_INTERVAL 20
141 #define CENT_INTERP_NUM ((int)(sizeof(cent_interp)/sizeof(cent_interp[0])))
143 /* This stores whether the pitch and speed are at their own limits */
144 /* or that of the timestretching algorithm */
145 static bool at_limit = false;
149 * The pitchscreen is divided into 3 viewports (each row is a viewport)
150 * Then each viewport is again divided into 3 colums, each showsing some infos
151 * Additionally, on touchscreen, each cell represents a button
153 * Below a sketch describing what each cell will show (what's drawn on it)
154 * --------------------------
155 * | | | | <-- pitch up in the middle (text and button)
156 * | | | | <-- arrows for mode toggling on the sides for touchscreen
157 * |------------------------|
158 * | | | | <-- semitone/speed up/down on the sides
159 * | | | | <-- reset pitch&speed in the middle
160 * |------------------------|
161 * | | | | <-- pitch down in the middle
162 * | | | | <-- Two "OK" for exit on the sides for touchscreen
163 * |------------------------|
169 * Fixes the viewports so they represent the 3 rows, and adds a little margin
170 * on all sides for the icons (which are drawn outside of the grid
172 * The modified viewports need to be passed to the touchscreen handling function
174 static void pitchscreen_fix_viewports(struct viewport *parent,
175 struct viewport pitch_viewports[PITCH_ITEM_COUNT])
177 int i, font_height;
178 font_height = font_get(parent->font)->height;
179 for (i = 0; i < PITCH_ITEM_COUNT; i++)
181 pitch_viewports[i] = *parent;
182 pitch_viewports[i].height = parent->height / PITCH_ITEM_COUNT;
183 pitch_viewports[i].x += ICON_BORDER;
184 pitch_viewports[i].width -= 2*ICON_BORDER;
186 pitch_viewports[PITCH_TOP].y += ICON_BORDER;
187 pitch_viewports[PITCH_TOP].height -= ICON_BORDER;
189 if(pitch_viewports[PITCH_MID].height < font_height * 2)
190 pitch_viewports[PITCH_MID].height = font_height * 2;
192 pitch_viewports[PITCH_MID].y = pitch_viewports[PITCH_TOP].y
193 + pitch_viewports[PITCH_TOP].height;
195 pitch_viewports[PITCH_BOTTOM].y = pitch_viewports[PITCH_MID].y
196 + pitch_viewports[PITCH_MID].height;
198 pitch_viewports[PITCH_BOTTOM].height -= ICON_BORDER;
201 /* must be called before pitchscreen_draw, or within
202 * since it neither clears nor updates the display */
203 static void pitchscreen_draw_icons(struct screen *display,
204 struct viewport *parent)
206 display->set_viewport(parent);
207 display->mono_bitmap(bitmap_icons_7x8[Icon_UpArrow],
208 parent->width/2 - 3,
209 2, 7, 8);
210 display->mono_bitmap(bitmap_icons_7x8[Icon_DownArrow],
211 parent->width /2 - 3,
212 parent->height - 10, 7, 8);
213 display->mono_bitmap(bitmap_icons_7x8[Icon_FastForward],
214 parent->width - 10,
215 parent->height /2 - 4, 7, 8);
216 display->mono_bitmap(bitmap_icons_7x8[Icon_FastBackward],
218 parent->height /2 - 4, 7, 8);
219 display->update_viewport();
222 static void pitchscreen_draw(struct screen *display, int max_lines,
223 struct viewport pitch_viewports[PITCH_ITEM_COUNT],
224 int32_t pitch, int32_t semitone
225 #if CONFIG_CODEC == SWCODEC
226 ,int32_t speed
227 #endif
230 const char* ptr;
231 char buf[32];
232 int w, h;
233 bool show_lang_pitch;
235 /* "Pitch up/Pitch down" - hide for a small screen,
236 * the text is drawn centered automatically
238 * note: this assumes 5 lines always fit on a touchscreen (should be
239 * reasonable) */
240 if (max_lines >= 5)
242 int w, h;
243 struct viewport *vp = &pitch_viewports[PITCH_TOP];
244 display->set_viewport(vp);
245 display->clear_viewport();
246 #ifdef HAVE_TOUCHSCREEN
247 /* two arrows in the top row, left and right column */
248 char *arrows[] = { "<", ">"};
249 display->getstringsize(arrows[0], &w, &h);
250 display->putsxy(0, vp->height/2 - h/2, arrows[0]);
251 display->putsxy(vp->width - w, vp->height/2 - h/2, arrows[1]);
252 #endif
253 /* UP: Pitch Up */
254 if (global_settings.pitch_mode_semitone)
255 ptr = str(LANG_PITCH_UP_SEMITONE);
256 else
257 ptr = str(LANG_PITCH_UP);
259 display->getstringsize(ptr, &w, NULL);
260 /* draw text */
261 display->putsxy(vp->width/2 - w/2, 0, ptr);
262 display->update_viewport();
264 /* DOWN: Pitch Down */
265 vp = &pitch_viewports[PITCH_BOTTOM];
266 display->set_viewport(vp);
267 display->clear_viewport();
269 #ifdef HAVE_TOUCHSCREEN
270 ptr = str(LANG_KBD_OK);
271 display->getstringsize(ptr, &w, &h);
272 /* one OK in the middle first column of the vp (at half height) */
273 display->putsxy(vp->width/6 - w/2, vp->height/2 - h/2, ptr);
274 /* one OK in the middle of the last column of the vp (at half height) */
275 display->putsxy(5*vp->width/6 - w/2, vp->height/2 - h/2, ptr);
276 #endif
277 if (global_settings.pitch_mode_semitone)
278 ptr = str(LANG_PITCH_DOWN_SEMITONE);
279 else
280 ptr = str(LANG_PITCH_DOWN);
281 display->getstringsize(ptr, &w, &h);
282 /* draw text */
283 display->putsxy(vp->width/2 - w/2, vp->height - h, ptr);
284 display->update_viewport();
287 /* Middle section */
288 display->set_viewport(&pitch_viewports[PITCH_MID]);
289 display->clear_viewport();
290 int width_used = 0;
292 /* Middle section upper line - hide for a small screen */
293 if ((show_lang_pitch = (max_lines >= 3)))
295 #if CONFIG_CODEC == SWCODEC
296 if(global_settings.pitch_mode_timestretch)
298 /* Pitch:XXX.X% */
299 if(global_settings.pitch_mode_semitone)
301 snprintf(buf, sizeof(buf), "%s: %s%d.%02d", str(LANG_PITCH),
302 semitone >= 0 ? "+" : "-",
303 abs(semitone / PITCH_SPEED_PRECISION),
304 abs((semitone % PITCH_SPEED_PRECISION) /
305 (PITCH_SPEED_PRECISION / 100))
308 else
310 snprintf(buf, sizeof(buf), "%s: %ld.%ld%%", str(LANG_PITCH),
311 pitch / PITCH_SPEED_PRECISION,
312 (pitch % PITCH_SPEED_PRECISION) /
313 (PITCH_SPEED_PRECISION / 10));
316 else
317 #endif
319 /* Rate */
320 snprintf(buf, sizeof(buf), "%s:", str(LANG_PLAYBACK_RATE));
322 display->getstringsize(buf, &w, &h);
323 display->putsxy((pitch_viewports[PITCH_MID].width / 2) - (w / 2),
324 (pitch_viewports[PITCH_MID].height / 2) - h, buf);
325 if (w > width_used)
326 width_used = w;
329 /* Middle section lower line */
330 /* "Speed:XXX%" */
331 #if CONFIG_CODEC == SWCODEC
332 if(global_settings.pitch_mode_timestretch)
334 snprintf(buf, sizeof(buf), "%s: %ld.%ld%%", str(LANG_SPEED),
335 speed / PITCH_SPEED_PRECISION,
336 (speed % PITCH_SPEED_PRECISION) / (PITCH_SPEED_PRECISION / 10));
338 else
339 #endif
341 if(global_settings.pitch_mode_semitone)
343 snprintf(buf, sizeof(buf), "%s%d.%02d",
344 semitone >= 0 ? "+" : "-",
345 abs(semitone / PITCH_SPEED_PRECISION),
346 abs((semitone % PITCH_SPEED_PRECISION) /
347 (PITCH_SPEED_PRECISION / 100))
350 else
352 snprintf(buf, sizeof(buf), "%ld.%ld%%",
353 pitch / PITCH_SPEED_PRECISION,
354 (pitch % PITCH_SPEED_PRECISION) / (PITCH_SPEED_PRECISION / 10));
358 display->getstringsize(buf, &w, &h);
359 display->putsxy((pitch_viewports[PITCH_MID].width / 2) - (w / 2),
360 show_lang_pitch ? (pitch_viewports[PITCH_MID].height / 2) :
361 (pitch_viewports[PITCH_MID].height / 2) - (h / 2),
362 buf);
363 if (w > width_used)
364 width_used = w;
366 /* "limit" and "timestretch" labels */
367 if (max_lines >= 7)
369 if(at_limit)
371 const char * const p = str(LANG_STRETCH_LIMIT);
372 display->getstringsize(p, &w, &h);
373 display->putsxy((pitch_viewports[PITCH_MID].width / 2) - (w / 2),
374 (pitch_viewports[PITCH_MID].height / 2) + h, p);
375 if (w > width_used)
376 width_used = w;
380 /* Middle section left/right labels */
381 const char *leftlabel = "-2%";
382 const char *rightlabel = "+2%";
383 #if CONFIG_CODEC == SWCODEC
384 if (global_settings.pitch_mode_timestretch)
386 leftlabel = "<<";
387 rightlabel = ">>";
389 #endif
391 /* Only display if they fit */
392 display->getstringsize(leftlabel, &w, &h);
393 width_used += w;
394 display->getstringsize(rightlabel, &w, &h);
395 width_used += w;
397 if (width_used <= pitch_viewports[PITCH_MID].width)
399 display->putsxy(0, (pitch_viewports[PITCH_MID].height / 2) - (h / 2),
400 leftlabel);
401 display->putsxy((pitch_viewports[PITCH_MID].width - w),
402 (pitch_viewports[PITCH_MID].height / 2) - (h / 2),
403 rightlabel);
405 display->update_viewport();
406 display->set_viewport(NULL);
409 static int32_t pitch_increase(int32_t pitch, int32_t pitch_delta, bool allow_cutoff
410 #if CONFIG_CODEC == SWCODEC
411 /* need this to maintain correct pitch/speed caps */
412 , int32_t speed
413 #endif
416 int32_t new_pitch;
417 #if CONFIG_CODEC == SWCODEC
418 int32_t new_stretch;
419 #endif
420 at_limit = false;
422 if (pitch_delta < 0)
424 /* for large jumps, snap up to whole numbers */
425 if(allow_cutoff && pitch_delta <= -PITCH_SPEED_PRECISION &&
426 (pitch + pitch_delta) % PITCH_SPEED_PRECISION != 0)
428 pitch_delta += PITCH_SPEED_PRECISION - ((pitch + pitch_delta) % PITCH_SPEED_PRECISION);
431 new_pitch = pitch + pitch_delta;
433 if (new_pitch < PITCH_MIN)
435 if (!allow_cutoff)
437 return pitch;
439 new_pitch = PITCH_MIN;
440 at_limit = true;
443 else if (pitch_delta > 0)
445 /* for large jumps, snap down to whole numbers */
446 if(allow_cutoff && pitch_delta >= PITCH_SPEED_PRECISION &&
447 (pitch + pitch_delta) % PITCH_SPEED_PRECISION != 0)
449 pitch_delta -= (pitch + pitch_delta) % PITCH_SPEED_PRECISION;
452 new_pitch = pitch + pitch_delta;
454 if (new_pitch > PITCH_MAX)
456 if (!allow_cutoff)
457 return pitch;
458 new_pitch = PITCH_MAX;
459 at_limit = true;
462 else
464 /* pitch_delta == 0 -> no real change */
465 return pitch;
467 #if CONFIG_CODEC == SWCODEC
468 if (dsp_timestretch_available())
470 /* increase the multiple to increase precision of this calculation */
471 new_stretch = GET_STRETCH(new_pitch, speed);
472 if(new_stretch < STRETCH_MIN)
474 /* we have to ignore allow_cutoff, because we can't have the */
475 /* stretch go higher than STRETCH_MAX */
476 new_pitch = GET_PITCH(speed, STRETCH_MIN);
478 else if(new_stretch > STRETCH_MAX)
480 /* we have to ignore allow_cutoff, because we can't have the */
481 /* stretch go higher than STRETCH_MAX */
482 new_pitch = GET_PITCH(speed, STRETCH_MAX);
485 if(new_stretch >= STRETCH_MAX ||
486 new_stretch <= STRETCH_MIN)
488 at_limit = true;
491 #endif
493 sound_set_pitch(new_pitch);
495 return new_pitch;
498 static int32_t get_semitone_from_pitch(int32_t pitch)
500 int semitone = 0;
501 int32_t fractional_index = 0;
503 while(semitone < NUM_SEMITONES - 1 &&
504 pitch >= semitone_table[semitone + 1])
506 semitone++;
510 /* now find the fractional part */
511 while(pitch > (cent_interp[fractional_index + 1] *
512 semitone_table[semitone] / PITCH_SPEED_100))
514 /* Check to make sure fractional_index isn't too big */
515 /* This should never happen. */
516 if(fractional_index >= CENT_INTERP_NUM - 1)
518 break;
520 fractional_index++;
523 int32_t semitone_pitch_a = cent_interp[fractional_index] *
524 semitone_table[semitone] /
525 PITCH_SPEED_100;
526 int32_t semitone_pitch_b = cent_interp[fractional_index + 1] *
527 semitone_table[semitone] /
528 PITCH_SPEED_100;
529 /* this will be the integer offset from the cent_interp entry */
530 int32_t semitone_frac_ofs = (pitch - semitone_pitch_a) * CENT_INTERP_INTERVAL /
531 (semitone_pitch_b - semitone_pitch_a);
532 semitone = (semitone + SEMITONE_START) * PITCH_SPEED_PRECISION +
533 fractional_index * CENT_INTERP_INTERVAL +
534 semitone_frac_ofs;
536 return semitone;
539 static int32_t get_pitch_from_semitone(int32_t semitone)
541 int32_t adjusted_semitone = semitone - SEMITONE_START * PITCH_SPEED_PRECISION;
543 /* Find the index into the semitone table */
544 int32_t semitone_index = (adjusted_semitone / PITCH_SPEED_PRECISION);
546 /* set pitch to the semitone's integer part value */
547 int32_t pitch = semitone_table[semitone_index];
548 /* get the range of the cent modification for future calculation */
549 int32_t pitch_mod_a =
550 cent_interp[(adjusted_semitone % PITCH_SPEED_PRECISION) /
551 CENT_INTERP_INTERVAL];
552 int32_t pitch_mod_b =
553 cent_interp[(adjusted_semitone % PITCH_SPEED_PRECISION) /
554 CENT_INTERP_INTERVAL + 1];
555 /* figure out the cent mod amount based on the semitone fractional value */
556 int32_t pitch_mod = pitch_mod_a + (pitch_mod_b - pitch_mod_a) *
557 (adjusted_semitone % CENT_INTERP_INTERVAL) / CENT_INTERP_INTERVAL;
559 /* modify pitch based on the mod amount we just calculated */
560 return (pitch * pitch_mod + PITCH_SPEED_100 / 2) / PITCH_SPEED_100;
563 static int32_t pitch_increase_semitone(int32_t pitch,
564 int32_t current_semitone,
565 int32_t semitone_delta
566 #if CONFIG_CODEC == SWCODEC
567 , int32_t speed
568 #endif
571 int32_t new_semitone = current_semitone;
573 /* snap to the delta interval */
574 if(current_semitone % semitone_delta != 0)
576 if(current_semitone > 0 && semitone_delta > 0)
577 new_semitone += semitone_delta;
578 else if(current_semitone < 0 && semitone_delta < 0)
579 new_semitone += semitone_delta;
581 new_semitone -= new_semitone % semitone_delta;
583 else
584 new_semitone += semitone_delta;
586 /* clamp the pitch so it doesn't go beyond the pitch limits */
587 if(new_semitone < (SEMITONE_START * PITCH_SPEED_PRECISION))
589 new_semitone = SEMITONE_START * PITCH_SPEED_PRECISION;
590 at_limit = true;
592 else if(new_semitone > (SEMITONE_END * PITCH_SPEED_PRECISION))
594 new_semitone = SEMITONE_END * PITCH_SPEED_PRECISION;
595 at_limit = true;
598 int32_t new_pitch = get_pitch_from_semitone(new_semitone);
600 #if CONFIG_CODEC == SWCODEC
601 int32_t new_stretch = GET_STRETCH(new_pitch, speed);
603 /* clamp the pitch so it doesn't go beyond the stretch limits */
604 if( new_stretch > STRETCH_MAX)
606 new_pitch = GET_PITCH(speed, STRETCH_MAX);
607 new_semitone = get_semitone_from_pitch(new_pitch);
608 at_limit = true;
610 else if (new_stretch < STRETCH_MIN)
612 new_pitch = GET_PITCH(speed, STRETCH_MIN);
613 new_semitone = get_semitone_from_pitch(new_pitch);
614 at_limit = true;
616 #endif
618 pitch_increase(pitch, new_pitch - pitch, false
619 #if CONFIG_CODEC == SWCODEC
620 , speed
621 #endif
624 return new_semitone;
627 #ifdef HAVE_TOUCHSCREEN
629 * Check for touchscreen presses as per sketch above in this file
631 * goes through each row of the, checks whether the touchscreen
632 * was pressed in it. Then it looks the columns of each row for specific actions
634 static int pitchscreen_do_touchscreen(struct viewport vps[])
636 short x, y;
637 struct viewport *this_vp = &vps[PITCH_TOP];
638 int ret;
639 ret = action_get_touchscreen_press_in_vp(&x, &y, this_vp);
641 /* top row */
642 if (ret > ACTION_UNKNOWN)
643 { /* press on top row, left or right column
644 * only toggle mode if released */
645 int column = this_vp->width / 3;
646 if ((x < column || x > (2*column)) && (ret == BUTTON_REL))
647 return ACTION_PS_TOGGLE_MODE;
650 else if (x >= column && x <= (2*column))
651 { /* center column pressed */
652 if (ret == BUTTON_REPEAT)
653 return ACTION_PS_INC_BIG;
654 else if (ret == BUTTON_TOUCHSCREEN)
655 return ACTION_PS_INC_SMALL;
657 return ACTION_NONE;
660 /* now the center row */
661 this_vp = &vps[PITCH_MID];
662 ret = action_get_touchscreen_press_in_vp(&x, &y, this_vp);
664 if (ret > ACTION_UNKNOWN)
666 int column = this_vp->width / 3;
668 if (x < column)
669 { /* left column */
670 if (ret & BUTTON_REL)
671 return ACTION_PS_NUDGE_LEFTOFF;
672 else if (ret & BUTTON_REPEAT)
673 return ACTION_PS_SLOWER;
674 return ACTION_PS_NUDGE_LEFT;
676 else if (x > (2*column))
677 { /* right column */
678 if (ret & BUTTON_REL)
679 return ACTION_PS_NUDGE_LEFTOFF;
680 else if (ret & BUTTON_REPEAT)
681 return ACTION_PS_FASTER;
682 return ACTION_PS_NUDGE_LEFT;
684 /* center column was pressed */
685 return ACTION_PS_RESET;
688 /* now the bottom row */
689 this_vp = &vps[PITCH_BOTTOM];
690 ret = action_get_touchscreen_press_in_vp(&x, &y, this_vp);
692 if (ret > ACTION_UNKNOWN)
694 int column = this_vp->width / 3;
696 /* left or right column is exit */
697 if ((x < column || x > (2*column)) && (ret == BUTTON_REL))
698 return ACTION_PS_EXIT;
699 else if (x >= column && x <= (2*column))
700 { /* center column was pressed */
701 if (ret == BUTTON_REPEAT)
702 return ACTION_PS_DEC_BIG;
703 else if (ret == BUTTON_TOUCHSCREEN)
704 return ACTION_PS_DEC_SMALL;
706 return ACTION_NONE;
708 return ACTION_NONE;
711 #endif
713 returns:
714 0 on exit
715 1 if USB was connected
718 int gui_syncpitchscreen_run(void)
720 int button, i;
721 int32_t pitch = sound_get_pitch();
722 int32_t semitone;
724 int32_t new_pitch;
725 int32_t pitch_delta;
726 bool nudged = false;
727 bool exit = false;
728 /* should maybe be passed per parameter later, not needed for now */
729 struct viewport parent[NB_SCREENS];
730 struct viewport pitch_viewports[NB_SCREENS][PITCH_ITEM_COUNT];
731 int max_lines[NB_SCREENS];
733 #if CONFIG_CODEC == SWCODEC
734 int32_t new_speed = 0, new_stretch;
736 /* the speed variable holds the apparent speed of the playback */
737 int32_t speed;
738 if (dsp_timestretch_available())
740 speed = GET_SPEED(pitch, dsp_get_timestretch());
742 else
744 speed = pitch;
747 /* Figure out whether to be in timestretch mode */
748 if (global_settings.pitch_mode_timestretch && !dsp_timestretch_available())
750 global_settings.pitch_mode_timestretch = false;
751 settings_save();
753 #endif
755 /* set the semitone index based on the current pitch */
756 semitone = get_semitone_from_pitch(pitch);
758 /* initialize pitchscreen vps */
759 FOR_NB_SCREENS(i)
761 viewport_set_defaults(&parent[i], i);
762 max_lines[i] = viewport_get_nb_lines(&parent[i]);
763 pitchscreen_fix_viewports(&parent[i], pitch_viewports[i]);
764 screens[i].set_viewport(&parent[i]);
765 screens[i].clear_viewport();
767 /* also, draw the icons now, it's only needed once */
768 pitchscreen_draw_icons(&screens[i], &parent[i]);
770 #if CONFIG_CODEC == SWCODEC
771 pcmbuf_set_low_latency(true);
772 #endif
774 while (!exit)
776 FOR_NB_SCREENS(i)
777 pitchscreen_draw(&screens[i], max_lines[i],
778 pitch_viewports[i], pitch, semitone
779 #if CONFIG_CODEC == SWCODEC
780 , speed
781 #endif
783 pitch_delta = 0;
784 #if CONFIG_CODEC == SWCODEC
785 new_speed = 0;
786 #endif
787 button = get_action(CONTEXT_PITCHSCREEN, HZ);
789 #ifdef HAVE_TOUCHSCREEN
790 if (button == ACTION_TOUCHSCREEN)
792 FOR_NB_SCREENS(i)
793 button = pitchscreen_do_touchscreen(pitch_viewports[i]);
795 #endif
796 switch (button)
798 case ACTION_PS_INC_SMALL:
799 if(global_settings.pitch_mode_semitone)
800 pitch_delta = SEMITONE_SMALL_DELTA;
801 else
802 pitch_delta = PITCH_SMALL_DELTA;
803 break;
805 case ACTION_PS_INC_BIG:
806 if(global_settings.pitch_mode_semitone)
807 pitch_delta = SEMITONE_BIG_DELTA;
808 else
809 pitch_delta = PITCH_BIG_DELTA;
810 break;
812 case ACTION_PS_DEC_SMALL:
813 if(global_settings.pitch_mode_semitone)
814 pitch_delta = -SEMITONE_SMALL_DELTA;
815 else
816 pitch_delta = -PITCH_SMALL_DELTA;
817 break;
819 case ACTION_PS_DEC_BIG:
820 if(global_settings.pitch_mode_semitone)
821 pitch_delta = -SEMITONE_BIG_DELTA;
822 else
823 pitch_delta = -PITCH_BIG_DELTA;
824 break;
826 case ACTION_PS_NUDGE_RIGHT:
827 #if CONFIG_CODEC == SWCODEC
828 if (!global_settings.pitch_mode_timestretch)
830 #endif
831 new_pitch = pitch_increase(pitch, PITCH_NUDGE_DELTA, false
832 #if CONFIG_CODEC == SWCODEC
833 , speed
834 #endif
836 nudged = (new_pitch != pitch);
837 pitch = new_pitch;
838 semitone = get_semitone_from_pitch(pitch);
839 #if CONFIG_CODEC == SWCODEC
840 speed = pitch;
841 #endif
842 break;
843 #if CONFIG_CODEC == SWCODEC
845 else
847 new_speed = speed + SPEED_SMALL_DELTA;
848 at_limit = false;
850 break;
852 case ACTION_PS_FASTER:
853 if (global_settings.pitch_mode_timestretch)
855 new_speed = speed + SPEED_BIG_DELTA;
856 /* snap to whole numbers */
857 if(new_speed % PITCH_SPEED_PRECISION != 0)
858 new_speed -= new_speed % PITCH_SPEED_PRECISION;
859 at_limit = false;
861 break;
862 #endif
864 case ACTION_PS_NUDGE_RIGHTOFF:
865 if (nudged)
867 pitch = pitch_increase(pitch, -PITCH_NUDGE_DELTA, false
868 #if CONFIG_CODEC == SWCODEC
869 , speed
870 #endif
872 #if CONFIG_CODEC == SWCODEC
873 speed = pitch;
874 #endif
875 semitone = get_semitone_from_pitch(pitch);
876 nudged = false;
878 break;
880 case ACTION_PS_NUDGE_LEFT:
881 #if CONFIG_CODEC == SWCODEC
882 if (!global_settings.pitch_mode_timestretch)
884 #endif
885 new_pitch = pitch_increase(pitch, -PITCH_NUDGE_DELTA, false
886 #if CONFIG_CODEC == SWCODEC
887 , speed
888 #endif
890 nudged = (new_pitch != pitch);
891 pitch = new_pitch;
892 semitone = get_semitone_from_pitch(pitch);
893 #if CONFIG_CODEC == SWCODEC
894 speed = pitch;
895 #endif
896 break;
897 #if CONFIG_CODEC == SWCODEC
899 else
901 new_speed = speed - SPEED_SMALL_DELTA;
902 at_limit = false;
904 break;
906 case ACTION_PS_SLOWER:
907 if (global_settings.pitch_mode_timestretch)
909 new_speed = speed - SPEED_BIG_DELTA;
910 /* snap to whole numbers */
911 if(new_speed % PITCH_SPEED_PRECISION != 0)
912 new_speed += PITCH_SPEED_PRECISION - speed % PITCH_SPEED_PRECISION;
913 at_limit = false;
915 break;
916 #endif
918 case ACTION_PS_NUDGE_LEFTOFF:
919 if (nudged)
921 pitch = pitch_increase(pitch, PITCH_NUDGE_DELTA, false
922 #if CONFIG_CODEC == SWCODEC
923 , speed
924 #endif
926 #if CONFIG_CODEC == SWCODEC
927 speed = pitch;
928 #endif
929 semitone = get_semitone_from_pitch(pitch);
930 nudged = false;
932 break;
934 case ACTION_PS_RESET:
935 pitch = PITCH_SPEED_100;
936 sound_set_pitch(pitch);
937 #if CONFIG_CODEC == SWCODEC
938 speed = PITCH_SPEED_100;
939 if (dsp_timestretch_available())
941 dsp_set_timestretch(PITCH_SPEED_100);
942 at_limit = false;
944 #endif
945 semitone = get_semitone_from_pitch(pitch);
946 break;
948 case ACTION_PS_TOGGLE_MODE:
949 global_settings.pitch_mode_semitone = !global_settings.pitch_mode_semitone;
950 #if CONFIG_CODEC == SWCODEC
952 if (dsp_timestretch_available() && !global_settings.pitch_mode_semitone)
954 global_settings.pitch_mode_timestretch = !global_settings.pitch_mode_timestretch;
955 if(!global_settings.pitch_mode_timestretch)
957 /* no longer in timestretch mode. Reset speed */
958 speed = pitch;
959 dsp_set_timestretch(PITCH_SPEED_100);
962 settings_save();
963 #endif
964 break;
966 case ACTION_PS_EXIT:
967 exit = true;
968 break;
970 default:
971 if (default_event_handler(button) == SYS_USB_CONNECTED)
972 return 1;
973 break;
975 if (pitch_delta)
977 if (global_settings.pitch_mode_semitone)
979 semitone = pitch_increase_semitone(pitch, semitone, pitch_delta
980 #if CONFIG_CODEC == SWCODEC
981 , speed
982 #endif
984 pitch = get_pitch_from_semitone(semitone);
986 else
988 pitch = pitch_increase(pitch, pitch_delta, true
989 #if CONFIG_CODEC == SWCODEC
990 , speed
991 #endif
993 semitone = get_semitone_from_pitch(pitch);
995 #if CONFIG_CODEC == SWCODEC
996 if (global_settings.pitch_mode_timestretch)
998 /* do this to make sure we properly obey the stretch limits */
999 new_speed = speed;
1001 else
1003 speed = pitch;
1005 #endif
1008 #if CONFIG_CODEC == SWCODEC
1009 if(new_speed)
1011 new_stretch = GET_STRETCH(pitch, new_speed);
1013 /* limit the amount of stretch */
1014 if(new_stretch > STRETCH_MAX)
1016 new_stretch = STRETCH_MAX;
1017 new_speed = GET_SPEED(pitch, new_stretch);
1019 else if(new_stretch < STRETCH_MIN)
1021 new_stretch = STRETCH_MIN;
1022 new_speed = GET_SPEED(pitch, new_stretch);
1025 new_stretch = GET_STRETCH(pitch, new_speed);
1026 if(new_stretch >= STRETCH_MAX ||
1027 new_stretch <= STRETCH_MIN)
1029 at_limit = true;
1032 /* set the amount of stretch */
1033 dsp_set_timestretch(new_stretch);
1035 /* update the speed variable with the new speed */
1036 speed = new_speed;
1038 /* Reset new_speed so we only call dsp_set_timestretch */
1039 /* when needed */
1040 new_speed = 0;
1042 #endif
1044 #if CONFIG_CODEC == SWCODEC
1045 pcmbuf_set_low_latency(false);
1046 #endif
1047 return 0;