firmware/export/config/iriverh100.h

   1 #define TARGET_TREE /* this target is using the target tree system */
   2
   3 /*
   4  * This config file is for iriver iHP-100, iHP-110, iHP-115
   5  */
   6 #define IRIVER_H100_SERIES 1
   7
   8 #define MODEL_NAME "iriver iHP-100 series"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 1
  12
  13 /* define this if you use an ATA controller */
  14 #define CONFIG_STORAGE STORAGE_ATA
  15
  16 /*define this if the ATA controller and method of USB access support LBA48 */
  17 #define HAVE_LBA48
  18
  19 /* define this if you have a bitmap LCD display */
  20 #define HAVE_LCD_BITMAP
  21
  22 /* define this if you want album art for this target */
  23 #define HAVE_ALBUMART
  24
  25 /* define this to enable bitmap scaling */
  26 #define HAVE_BMP_SCALING
  27
  28 /* define this to enable JPEG decoding */
  29 #define HAVE_JPEG
  30
  31 /* define this if you can flip your LCD */
  32 #define HAVE_LCD_FLIP
  33
  34 /* define this if you can invert the colours on your LCD */
  35 #define HAVE_LCD_INVERT
  36
  37 /* define this if you have access to the quickscreen */
  38 #define HAVE_QUICKSCREEN
  39 /* define this if you have access to the pitchscreen */
  40 #define HAVE_PITCHSCREEN
  41
  42 /* define this if you would like tagcache to build on this target */
  43 #define HAVE_TAGCACHE
  44
  45 /* LCD dimensions */
  46 #define LCD_WIDTH  160
  47 #define LCD_HEIGHT 128
  48 #define LCD_DEPTH  2
  49
  50 #define LCD_PIXELFORMAT VERTICAL_PACKING
  51
  52 /* Display colours, for screenshots and sim (0xRRGGBB) */
  53 #define LCD_DARKCOLOR       0x000000
  54 #define LCD_BRIGHTCOLOR     0x5a915a
  55 #define LCD_BL_DARKCOLOR    0x000000
  56 #define LCD_BL_BRIGHTCOLOR  0xadd8e6
  57
  58 /* remote LCD */
  59 #define LCD_REMOTE_WIDTH  128
  60 #define LCD_REMOTE_HEIGHT 64
  61 #define LCD_REMOTE_DEPTH  1
  62
  63 #define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
  64
  65 /* Remote display colours, for screenshots and sim (0xRRGGBB) */
  66 #define LCD_REMOTE_DARKCOLOR       0x000000
  67 #define LCD_REMOTE_BRIGHTCOLOR     0x5a915a
  68 #define LCD_REMOTE_BL_DARKCOLOR    0x000000
  69 #define LCD_REMOTE_BL_BRIGHTCOLOR  0x82b4fa
  70
  71 #define CONFIG_KEYPAD IRIVER_H100_PAD
  72
  73 #define CONFIG_REMOTE_KEYPAD H100_REMOTE
  74
  75 /* Define this to enable morse code input */
  76 #define HAVE_MORSE_INPUT
  77
  78 /* Define this if you do software codec */
  79 #define CONFIG_CODEC SWCODEC
  80
  81 /* Define this if you have an remote lcd */
  82 #define HAVE_REMOTE_LCD
  83
  84 /* Define if we have a hardware defect that causes ticking on the audio line */
  85 #define HAVE_REMOTE_LCD_TICKING
  86
  87 #define CONFIG_LCD LCD_S1D15E06
  88
  89 /* define this if you have a disk storage, i.e. something
  90    that needs spinups and can cause skips when shaked */
  91 #define HAVE_DISK_STORAGE
  92
  93 /* Define this for LCD backlight available */
  94 #define HAVE_BACKLIGHT
  95
  96 /* We can fade the backlight by using PWM */
  97 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
  98
  99 /* Define this if you have a software controlled poweroff */
 100 #define HAVE_SW_POWEROFF
 101
 102 /* The number of bytes reserved for loadable codecs */
 103 #define CODEC_SIZE 0x100000
 104
 105 /* The number of bytes reserved for loadable plugins */
 106 #define PLUGIN_BUFFER_SIZE 0x80000
 107
 108 #define AB_REPEAT_ENABLE 1
 109
 110 #define CONFIG_TUNER TEA5767
 111 #define CONFIG_TUNER_XTAL 32768
 112
 113 #define HAVE_UDA1380
 114
 115 /* define this if you have recording possibility */
 116 #define HAVE_RECORDING
 117
 118 /* define hardware samples rate caps mask */
 119 #define HW_SAMPR_CAPS   (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
 120
 121 /* define the bitmask of recording sample rates */
 122 #define REC_SAMPR_CAPS  (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
 123
 124 #define HAVE_AGC
 125
 126 #define HAVE_RECORDING_HISTOGRAM
 127
 128 #define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
 129 #define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
 130 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
 131 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 132 #define BATTERY_TYPES_COUNT  1    /* only one type */
 133
 134 /* Hardware controlled charging */
 135 #define CONFIG_CHARGING CHARGING_SIMPLE
 136
 137 /* define current usage levels */
 138 #define CURRENT_NORMAL     80  /* 16h playback on 1300mAh battery */
 139 #define CURRENT_BACKLIGHT  23  /* from IriverBattery twiki page */
 140 #define CURRENT_SPDIF_OUT  10  /* optical SPDIF output on */
 141 #define CURRENT_RECORD    105  /* additional current while recording */
 142 #define CURRENT_REMOTE      8  /* additional current when remote connected */
 143
 144 /* Define this if you have a Motorola SCF5249 */
 145 #define CONFIG_CPU MCF5249
 146
 147 /* Define this if you want to use coldfire's i2c interface */
 148 #define CONFIG_I2C I2C_COLDFIRE
 149
 150 /* Define this if you can run rockbox from flash memory */
 151 /* In theory we can, but somebody needs to verify there are no issues. */
 152 #define HAVE_FLASHED_ROCKBOX
 153
 154 /* define this if the hardware can be powered off while charging */
 155 #define HAVE_POWEROFF_WHILE_CHARGING
 156
 157 /* The size of the flash ROM */
 158 #define FLASH_SIZE 0x200000
 159
 160 /* Define this to the CPU frequency */
 161 #define CPU_FREQ      11289600
 162
 163 /* Define this if you have ATA power-off control */
 164 #define HAVE_ATA_POWER_OFF
 165
 166 /* Offset ( in the firmware file's header ) to the file CRC */
 167 #define FIRMWARE_OFFSET_FILE_CRC 0
 168
 169 /* Offset ( in the firmware file's header ) to the real data */
 170 #define FIRMWARE_OFFSET_FILE_DATA 8
 171
 172 #define HAVE_ATA_LED_CTRL
 173
 174 /* Define this if you have adjustable CPU frequency */
 175 #define HAVE_ADJUSTABLE_CPU_FREQ
 176
 177 #define BOOTFILE_EXT "iriver"
 178 #define BOOTFILE "rockbox." BOOTFILE_EXT
 179 #define BOOTDIR "/.rockbox"
 180
 181 #define BOOTLOADER_ENTRYPOINT  0x001F0000
 182 #define FLASH_RAMIMAGE_ENTRY   0x00001000
 183 #define FLASH_ROMIMAGE_ENTRY   0x00100000
 184 #define FLASH_MAGIC            0xfbfbfbf2
 185
 186 /* Define this if there is an EEPROM chip */
 187 #define HAVE_EEPROM
 188
 189 /* Define this if the EEPROM chip is used */
 190 #define HAVE_EEPROM_SETTINGS
 191
 192 /* Define bitmask of input sources - recordable bitmask can be defined
 193    explicitly if different */
 194 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | \
 195                         SRC_CAP_FMRADIO | SRC_CAP_SPDIF)
 196
 197 /* Define this for S/PDIF output available */
 198 #define HAVE_SPDIF_OUT
 199
 200 /* Define this if you can control the S/PDIF power */
 201 #define HAVE_SPDIF_POWER
 202 #define SPDIF_POWER_INVERTED
 203
 204 /* Define this for FM radio input available */
 205 #define HAVE_FMRADIO_IN
 206
 207 /** Port-specific settings **/
 208
 209 #define HAVE_LCD_CONTRAST
 210
 211 /* Main LCD backlight brightness range and defaults */
 212 #define MIN_CONTRAST_SETTING        14 /* White screen a bit higher than this */
 213 #define MAX_CONTRAST_SETTING        63 /* Black screen a bit lower than this */
 214 #define DEFAULT_CONTRAST_SETTING    27
 215
 216 /* Remote LCD contrast range and defaults */
 217 #define MIN_REMOTE_CONTRAST_SETTING     5
 218 #define MAX_REMOTE_CONTRAST_SETTING     63
 219 #define DEFAULT_REMOTE_CONTRAST_SETTING 42
 220
 221 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 222
 223 /* Define this if a programmable hotkey is mapped */
 224 #define HAVE_HOTKEY