firmware/export/config/ipod4g.h

   1 /*
   2  * This config file is for the Apple iPod 4g Grayscale
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 #define MODEL_NAME   "Apple iPod 4g Grayscale"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 8
  12
  13 /* define this if you use an ATA controller */
  14 #define CONFIG_STORAGE STORAGE_ATA
  15
  16 /*define this if the ATA controller and method of USB access support LBA48 */
  17 #define HAVE_LBA48
  18
  19 /* define this if you have recording possibility */
  20 #define HAVE_RECORDING
  21
  22 /* Define bitmask of input sources - recordable bitmask can be defined
  23    explicitly if different */
  24 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
  25
  26 /* define the bitmask of hardware sample rates */
  27 #define HW_SAMPR_CAPS   (SAMPR_CAP_44)
  28
  29 /* define the bitmask of recording sample rates */
  30 #define REC_SAMPR_CAPS  (SAMPR_CAP_44)
  31
  32 /* define this if you have a bitmap LCD display */
  33 #define HAVE_LCD_BITMAP
  34
  35 /* define this if you want album art for this target */
  36 #define HAVE_ALBUMART
  37
  38 /* define this to enable bitmap scaling */
  39 #define HAVE_BMP_SCALING
  40
  41 /* define this to enable JPEG decoding */
  42 #define HAVE_JPEG
  43
  44 /* define this if you can invert the colours on your LCD */
  45 #define HAVE_LCD_INVERT
  46
  47 /* define this if the LCD needs to be shutdown */
  48 #define HAVE_LCD_SHUTDOWN
  49
  50 /* define this if you have access to the quickscreen */
  51 #define HAVE_QUICKSCREEN
  52 /* define this if you have access to the pitchscreen */
  53 #define HAVE_PITCHSCREEN
  54
  55 /* define this if you would like tagcache to build on this target */
  56 #define HAVE_TAGCACHE
  57
  58 /* LCD dimensions */
  59 #define LCD_WIDTH  160
  60 #define LCD_HEIGHT 128
  61 #define LCD_DEPTH  2   /* 4 colours - 2bpp */
  62 #define LCD_PIXELFORMAT HORIZONTAL_PACKING
  63
  64 /* Display colours, for screenshots and sim (0xRRGGBB) */
  65 #define LCD_DARKCOLOR       0x000000
  66 #define LCD_BRIGHTCOLOR     0x5a915a
  67 #define LCD_BL_DARKCOLOR    0x000000
  68 #define LCD_BL_BRIGHTCOLOR  0xadd8e6
  69
  70 #define HAVE_LCD_CONTRAST
  71
  72 /* LCD contrast */
  73 #define MIN_CONTRAST_SETTING        5
  74 #define MAX_CONTRAST_SETTING        63
  75 #define DEFAULT_CONTRAST_SETTING    40 /* Match boot contrast */
  76
  77 /* define this if you can flip your LCD */
  78 #define HAVE_LCD_FLIP
  79
  80 #define CONFIG_KEYPAD IPOD_4G_PAD
  81
  82 /* Define this to enable morse code input */
  83 #define HAVE_MORSE_INPUT
  84
  85 /* Define this if you do software codec */
  86 #define CONFIG_CODEC SWCODEC
  87
  88 /* define this if you have a real-time clock */
  89 #define CONFIG_RTC RTC_PCF50605
  90
  91 /* Define if the device can wake from an RTC alarm */
  92 #define HAVE_RTC_ALARM
  93
  94 /* Define this if you can switch on/off the accessory power supply */
  95 #define HAVE_ACCESSORY_SUPPLY
  96
  97 /* Define this if you have a software controlled poweroff */
  98 #define HAVE_SW_POWEROFF
  99
 100 /* The number of bytes reserved for loadable codecs */
 101 #define CODEC_SIZE 0x100000
 102
 103 /* The number of bytes reserved for loadable plugins */
 104 #define PLUGIN_BUFFER_SIZE 0x80000
 105
 106 /* Define this if you have the WM8975 audio codec */
 107 #define HAVE_WM8975
 108
 109 #define AB_REPEAT_ENABLE 1
 110 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
 111
 112 /* define this if you have a disk storage, i.e. something
 113    that needs spinups and can cause skips when shaked */
 114 #define HAVE_DISK_STORAGE
 115
 116 /* Define this for LCD backlight available */
 117 #define HAVE_BACKLIGHT
 118
 119 /* define this if the unit uses a scrollwheel for navigation */
 120 #define HAVE_SCROLLWHEEL
 121 /* define to activate advanced wheel acceleration code */
 122 #define HAVE_WHEEL_ACCELERATION
 123 /* define from which rotation speed [degree/sec] on the acceleration starts */
 124 #define WHEEL_ACCEL_START 270
 125 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 126 #define WHEEL_ACCELERATION 3
 127
 128 /* Define this if you can detect headphones */
 129 #define HAVE_HEADPHONE_DETECTION
 130
 131 #define BATTERY_CAPACITY_DEFAULT 630 /* default battery capacity */
 132 #define BATTERY_CAPACITY_MIN 630  /* min. capacity selectable */
 133 #define BATTERY_CAPACITY_MAX 1200 /* max. capacity selectable */
 134 #define BATTERY_CAPACITY_INC 10   /* capacity increment */
 135 #define BATTERY_TYPES_COUNT  1    /* only one type */
 136
 137 /* Hardware controlled charging? */
 138 #define CONFIG_CHARGING CHARGING_MONITOR
 139
 140 /* define this if the unit can be powered or charged via USB */
 141 #define HAVE_USB_POWER
 142
 143 /* define current usage levels */
 144 #define CURRENT_NORMAL     100  /* MP3: ~10.5h out of 1100mAh battery  */
 145 #define CURRENT_BACKLIGHT  20  /* FIXME: this needs adjusting */
 146 #if defined(HAVE_RECORDING)
 147 #define CURRENT_RECORD     35  /* FIXME: this needs adjusting */
 148 #endif
 149
 150 /* Define Apple remote tuner */
 151 #define CONFIG_TUNER IPOD_REMOTE_TUNER
 152 #define HAVE_RDS_CAP
 153
 154 /* Define this if you have a PortalPlayer PP5020 */
 155 #define CONFIG_CPU PP5020
 156
 157 /* Define this if you want to use the PP5020 i2c interface */
 158 #define CONFIG_I2C I2C_PP5020
 159
 160 /* We're able to shut off power to the HDD */
 161 #define HAVE_ATA_POWER_OFF
 162
 163 /* define this if the hardware can be powered off while charging */
 164 //#define HAVE_POWEROFF_WHILE_CHARGING
 165
 166 /* The start address index for ROM builds */
 167 #define ROM_START 0x00000000
 168
 169 /* The size of the flash ROM */
 170 #define FLASH_SIZE 0x100000
 171
 172 /* Define this to the CPU frequency */
 173 #define CPU_FREQ      11289600
 174
 175 #define CONFIG_LCD LCD_IPOD2BPP
 176
 177 /* Offset ( in the firmware file's header ) to the file length */
 178 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 179
 180 /* Offset ( in the firmware file's header ) to the file CRC */
 181 #define FIRMWARE_OFFSET_FILE_CRC 0
 182
 183 /* Offset ( in the firmware file's header ) to the real data */
 184 #define FIRMWARE_OFFSET_FILE_DATA 8
 185
 186 /* USB On-the-go */
 187 #define CONFIG_USBOTG USBOTG_ARC
 188
 189 /* enable these for the experimental usb stack */
 190 #define HAVE_USBSTACK
 191 #define USE_ROCKBOX_USB
 192 #define USB_VENDOR_ID 0x05ac
 193 #define USB_PRODUCT_ID 0x1203
 194 #define HAVE_USB_HID_MOUSE
 195
 196 /* Define this if you have adjustable CPU frequency */
 197 #define HAVE_ADJUSTABLE_CPU_FREQ
 198
 199 /* Define this if you can read an absolute wheel position */
 200 #define HAVE_WHEEL_POSITION
 201
 202 #define BOOTFILE_EXT "ipod"
 203 #define BOOTFILE "rockbox." BOOTFILE_EXT
 204 #define BOOTDIR "/.rockbox"
 205
 206 #define ICODE_ATTR_TREMOR_NOT_MDCT
 207
 208 #define IPOD_ACCESSORY_PROTOCOL
 209 #define HAVE_SERIAL
 210
 211 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 212
 213
 214 /* DMA is used only for reading on PP502x because although reads are ~8x faster
 215  * writes appear to be ~25% slower.
 216  */
 217 #define HAVE_ATA_DMA
 218
 219 /* Define this if a programmable hotkey is mapped */
 220 #define HAVE_HOTKEY