FS#8961 - Anti-Aliased Fonts.
[kugel-rb.git] / firmware / export / config-tpj1022.h
blobd5f348132a690b39210e0b185430f65b18ab2c98
1 /*
2 * This config file is for the Tatung Elio TPJ-1022
3 */
5 #define TARGET_TREE /* this target is using the target tree system */
7 #define MODEL_NAME "Tatung Elio TPJ-1022"
9 /* For Rolo and boot loader */
10 #define MODEL_NUMBER 15
12 /* define this if you use an ATA controller */
13 #define CONFIG_STORAGE STORAGE_ATA
15 /* define this if you have recording possibility */
16 /*#define HAVE_RECORDING*/ /* TODO: add support for this */
18 /* define the bitmask of hardware sample rates */
19 #define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
20 SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
22 /* define the bitmask of recording sample rates
23 #define REC_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
24 SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */
26 /* define this if you have a bitmap LCD display */
27 #define HAVE_LCD_BITMAP
29 /* define this if you have a colour LCD */
30 #define HAVE_LCD_COLOR
32 /* define this if you have access to the quickscreen */
33 #define HAVE_QUICKSCREEN
35 /* define this if you have access to the pitchscreen */
36 #define HAVE_PITCHSCREEN
38 /* LCD dimensions */
39 #define LCD_WIDTH 220
40 #define LCD_HEIGHT 176
41 #define LCD_DEPTH 16 /* 65536 colours */
42 #define LCD_PIXELFORMAT RGB565
44 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
46 #define CONFIG_KEYPAD ELIO_TPJ1022_PAD
48 /* Define this if you do software codec */
49 #define CONFIG_CODEC SWCODEC
51 /* define this if you have a real-time clock */
52 #ifndef BOOTLOADER
53 //#define CONFIG_RTC RTC_E8564
54 #endif
56 /* Define this if you have a software controlled poweroff */
57 #define HAVE_SW_POWEROFF
59 /* The number of bytes reserved for loadable codecs */
60 #define CODEC_SIZE 0x100000
62 /* The number of bytes reserved for loadable plugins */
63 #define PLUGIN_BUFFER_SIZE 0x80000
65 /* Define this if you have the WM8731 audio codec */
66 #define HAVE_WM8731
68 #define AB_REPEAT_ENABLE 1
70 /* define this if you have a disk storage, i.e. something
71 that needs spinups and can cause skips when shaked */
72 #define HAVE_DISK_STORAGE
74 /* Define this for LCD backlight available */
75 #define HAVE_BACKLIGHT
77 #define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity
78 TODO: check this, probably different
79 for different models too */
80 #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
81 #define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */
82 #define BATTERY_CAPACITY_INC 10 /* capacity increment */
83 #define BATTERY_TYPES_COUNT 1 /* only one type */
85 /* Hardware controlled charging? FIXME */
86 #define CONFIG_CHARGING CHARGING_SIMPLE
88 /* define this if the unit can be powered or charged via USB */
89 /*#define HAVE_USB_POWER*/
91 #ifndef SIMULATOR
93 /* Define this if you have a PortalPlayer PP5020 */
94 #define CONFIG_CPU PP5020
96 /* Define this if you want to use the PP5020 i2c interface */
97 #define CONFIG_I2C I2C_PP5020
99 /* define this if the hardware can be powered off while charging */
100 /* TODO: should this be set for the H10? */
101 //#define HAVE_POWEROFF_WHILE_CHARGING
103 /* The start address index for ROM builds */
104 #define ROM_START 0x00000000
106 /* Define this to the CPU frequency */
107 /* TODO: this is probably wrong */
108 #define CPU_FREQ 11289600
110 /* Type of LCD */
111 #define CONFIG_LCD LCD_TPJ1022
113 #define DEFAULT_CONTRAST_SETTING 19
115 /* Offset ( in the firmware file's header ) to the file length */
116 #define FIRMWARE_OFFSET_FILE_LENGTH 0
118 /* Offset ( in the firmware file's header ) to the file CRC */
119 #define FIRMWARE_OFFSET_FILE_CRC 0
121 /* Offset ( in the firmware file's header ) to the real data */
122 #define FIRMWARE_OFFSET_FILE_DATA 8
124 /* USB On-the-go */
125 #define CONFIG_USBOTG USBOTG_ARC
127 /* define this if the unit can be powered or charged via USB */
128 #define HAVE_USB_POWER
130 /* enable these for the experimental usb stack ROOLKU */
131 #define HAVE_USBSTACK
132 #define USB_VENDOR_ID 0x07B4
133 #define USB_PRODUCT_ID 0x0280
134 /* Virtual LED (icon) */
135 #define CONFIG_LED LED_VIRTUAL
137 /* Define this if you have adjustable CPU frequency */
138 #define HAVE_ADJUSTABLE_CPU_FREQ
140 #define BOOTFILE_EXT "elio"
141 #define BOOTFILE "rockbox." BOOTFILE_EXT
142 #define BOOTDIR "/.rockbox"
144 #endif