firmware/export/config-e200v2.h

   1 /*
   2  * This config file is for the Sandisk Sansa e200v2
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 41
   8 #define MODEL_NAME   "Sandisk Sansa e200v2 series"
   9
  10 #define HW_SAMPR_CAPS       (SAMPR_CAP_44)
  11
  12 #if 0
  13 /* define this if you have recording possibility */
  14 #define HAVE_RECORDING
  15
  16 #define REC_SAMPR_CAPS      (SAMPR_CAP_22)
  17 #define REC_FREQ_DEFAULT    REC_FREQ_22 /* Default is not 44.1kHz */
  18 #define REC_SAMPR_DEFAULT   SAMPR_22
  19
  20 #endif
  21 /* Define bitmask of input sources - recordable bitmask can be defined
  22    explicitly if different */
  23 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
  24
  25 /* define this if you have a bitmap LCD display */
  26 #define HAVE_LCD_BITMAP
  27
  28 /* define this if you have a colour LCD */
  29 #define HAVE_LCD_COLOR
  30
  31 /* define this if you want album art for this target */
  32 #define HAVE_ALBUMART
  33
  34 /* define this to enable bitmap scaling */
  35 #define HAVE_BMP_SCALING
  36
  37 /* define this to enable JPEG decoding */
  38 #define HAVE_JPEG
  39
  40 /* define this if you have a light associated with the buttons */
  41 #define HAVE_BUTTON_LIGHT
  42
  43 /* define this if you have access to the quickscreen */
  44 #define HAVE_QUICKSCREEN
  45
  46 /* define this if you have access to the pitchscreen */
  47 #define HAVE_PITCHSCREEN
  48
  49 /* define this if you would like tagcache to build on this target */
  50 #define HAVE_TAGCACHE
  51
  52 /* LCD dimensions */
  53 #define LCD_WIDTH  176
  54 #define LCD_HEIGHT 220
  55 #define LCD_DEPTH  16   /* 65536 colours */
  56 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  57
  58 #ifndef BOOTLOADER
  59 /* define this if you have LCD enable function */
  60 #define HAVE_LCD_ENABLE
  61
  62 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  63    should be defined as well.
  64 #define HAVE_LCD_SLEEP
  65 #define HAVE_LCD_SLEEP_SETTING
  66  */
  67 #endif
  68
  69 /* define this if you can flip your LCD */
  70 #define HAVE_LCD_FLIP
  71
  72 /* define this if you can invert the colours on your LCD */
  73 #define HAVE_LCD_INVERT
  74
  75 /* put the lcd frame buffer in IRAM */
  76 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR
  77
  78 #define CONFIG_KEYPAD SANSA_E200_PAD
  79
  80 /* Define this if you do software codec */
  81 #define CONFIG_CODEC SWCODEC
  82
  83 /* There is no hardware tone control */
  84 #define HAVE_SW_TONE_CONTROLS
  85
  86 /* We're working on the assumption that the AS3525 has something
  87    similar to the AS3514 for audio codec etc */
  88 #define HAVE_AS3514
  89
  90 /* define this if you have a real-time clock */
  91 #ifndef BOOTLOADER
  92 #define CONFIG_RTC RTC_AS3514
  93 #endif
  94
  95 /* Define this if you have a software controlled poweroff */
  96 #define HAVE_SW_POWEROFF
  97
  98 /* Some Sansa E200s seem to be FAT16 formatted */
  99 #define HAVE_FAT16SUPPORT
 100
 101 /* The number of bytes reserved for loadable codecs */
 102 #define CODEC_SIZE 0x100000
 103
 104 /* The number of bytes reserved for loadable plugins */
 105 #define PLUGIN_BUFFER_SIZE 0x80000
 106
 107 #define AB_REPEAT_ENABLE 1
 108
 109 /* FM Tuner - suspected to be the SI4702 */
 110 #define CONFIG_TUNER SI4700
 111 /* #define HAVE_TUNER_PWR_CTRL */
 112
 113 /* Define this for LCD backlight available */
 114 #define HAVE_BACKLIGHT
 115 #define HAVE_BACKLIGHT_BRIGHTNESS
 116
 117 /* Main LCD backlight brightness range and defaults */
 118 #define MIN_BRIGHTNESS_SETTING      1
 119 #define MAX_BRIGHTNESS_SETTING     12
 120 #define DEFAULT_BRIGHTNESS_SETTING  6
 121
 122 /* Which backlight fading type? */
 123 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
 124
 125 /* define this if the unit uses a scrollwheel for navigation */
 126 #define HAVE_SCROLLWHEEL
 127 /* define to activate advanced wheel acceleration code */
 128 #define HAVE_WHEEL_ACCELERATION
 129 /* define from which rotation speed [degree/sec] on the acceleration starts */
 130 #define WHEEL_ACCEL_START 540
 131 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 132 #define WHEEL_ACCELERATION 1
 133
 134 /* define this if you have a flash memory storage */
 135 #define HAVE_FLASH_STORAGE
 136
 137 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
 138 #define CONFIG_STORAGE STORAGE_SD
 139
 140 #define BATTERY_CAPACITY_DEFAULT 730    /* default battery capacity */
 141 #define BATTERY_CAPACITY_MIN 730        /* min. capacity selectable */
 142 #define BATTERY_CAPACITY_MAX 730        /* max. capacity selectable */
 143 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 144 #define BATTERY_TYPES_COUNT  1          /* only one type */
 145
 146 /* Charging implemented in a target-specific algorithm */
 147 #define CONFIG_CHARGING CHARGING_TARGET
 148
 149 /* define this if the unit can be powered or charged via USB */
 150 #define HAVE_USB_POWER
 151
 152 /** Non-simulator section **/
 153 #ifndef SIMULATOR
 154
 155 /* Define this if you have an AMS AS3525*/
 156 #define CONFIG_CPU AS3525
 157
 158 /* Define how much SD sectors are reserved for OF */
 159 #define AMS_OF_SIZE 0xF000
 160
 161 /* Define this if you want to use the AS2525 i2c interface */
 162 #define CONFIG_I2C I2C_AS3525
 163
 164 /* define this if the hardware can be powered off while charging */
 165 /* Sansa can't be powered off while charging */
 166 /* #define HAVE_POWEROFF_WHILE_CHARGING */
 167
 168 /* The start address index for ROM builds */
 169 #define ROM_START 0x00000000
 170
 171 /* Define this to the CPU frequency */
 172 #define CPU_FREQ      75000000
 173
 174 /* Type of LCD TODO: hopefully the same as the x5 but check this*/
 175 #define CONFIG_LCD LCD_X5
 176
 177 /* Offset ( in the firmware file's header ) to the file CRC and data. These are
 178    only used when loading the old format rockbox.e200 file */
 179 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 180 #define FIRMWARE_OFFSET_FILE_DATA   0x8
 181
 182 #ifndef BOOTLOADER
 183 #define HAVE_MULTIDRIVE
 184 #define NUM_DRIVES 2
 185 #define HAVE_HOTSWAP
 186 #endif
 187
 188 #define USB_HANDLED_BY_OF
 189
 190 /* USB On-the-go */
 191 #define CONFIG_USBOTG USBOTG_AS3525
 192
 193 /* enable these for the experimental usb stack */
 194 #define HAVE_USBSTACK
 195 #define USB_VENDOR_ID 0x0781
 196 #define USB_PRODUCT_ID 0x7423
 197
 198 /* Virtual LED (icon) */
 199 #define CONFIG_LED LED_VIRTUAL
 200
 201 /* Define this if you have adjustable CPU frequency */
 202 #define HAVE_ADJUSTABLE_CPU_FREQ
 203
 204 #define BOOTFILE_EXT    "sansa"
 205 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 206 #define BOOTDIR "/.rockbox"
 207
 208 #define ICODE_ATTR_TREMOR_NOT_MDCT
 209
 210 #define INCLUDE_TIMEOUT_API
 211
 212 #endif /* SIMULATOR */
 213
 214 /* Default recording levels */
 215 #define DEFAULT_REC_MIC_GAIN    23
 216 #define DEFAULT_REC_LEFT_GAIN   23
 217 #define DEFAULT_REC_RIGHT_GAIN  23