firmware/export/config/ipodmini1g.h

   1 /*
   2  * This config file is for the Apple iPod Mini (1st Gen)
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 #define MODEL_NAME   "Apple iPod Mini 1g"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 9
  12
  13 /* define this if you use an ATA controller */
  14 #define CONFIG_STORAGE STORAGE_ATA
  15
  16 /* define this if you have recording possibility */
  17 /*#define HAVE_RECORDING*/
  18
  19 /* define the bitmask of hardware sample rates */
  20 #define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  21                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
  22
  23 /* define the bitmask of recording sample rates
  24 #define REC_SAMPR_CAPS  (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  25                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */
  26
  27 /* define this if you have a bitmap LCD display */
  28 #define HAVE_LCD_BITMAP
  29
  30 /* define this if you want album art for this target */
  31 #define HAVE_ALBUMART
  32
  33 /* define this to enable bitmap scaling */
  34 #define HAVE_BMP_SCALING
  35
  36 /* define this to enable JPEG decoding */
  37 #define HAVE_JPEG
  38
  39 /* define this if you can invert the colours on your LCD */
  40 #define HAVE_LCD_INVERT
  41
  42 /* define this if the LCD needs to be shutdown */
  43 #define HAVE_LCD_SHUTDOWN
  44
  45 /* define this if you have access to the quickscreen */
  46 #define HAVE_QUICKSCREEN
  47 /* define this if you have access to the pitchscreen */
  48 #define HAVE_PITCHSCREEN
  49
  50 /* define this if you would like tagcache to build on this target */
  51 #define HAVE_TAGCACHE
  52
  53 /* LCD dimensions */
  54 #define LCD_WIDTH  138
  55 #define LCD_HEIGHT 110
  56 #define LCD_DEPTH  2   /* 4 colours - 2bpp */
  57
  58 #define LCD_PIXELFORMAT HORIZONTAL_PACKING
  59
  60 /* Display colours, for screenshots and sim (0xRRGGBB) */
  61 #define LCD_DARKCOLOR       0x000000
  62 #define LCD_BRIGHTCOLOR     0x648764
  63 #define LCD_BL_DARKCOLOR    0x000000
  64 #define LCD_BL_BRIGHTCOLOR  0xdfd8ff
  65
  66 #define HAVE_LCD_CONTRAST
  67
  68 /* LCD contrast */
  69 #define MIN_CONTRAST_SETTING        5
  70 #define MAX_CONTRAST_SETTING        63
  71 #define DEFAULT_CONTRAST_SETTING    40 /* Match boot contrast */
  72
  73 /* define this if you can flip your LCD */
  74 #define HAVE_LCD_FLIP
  75
  76 #define CONFIG_KEYPAD IPOD_4G_PAD
  77
  78 #define HAVE_SCROLLWHEEL
  79
  80 /* Define this to enable morse code input */
  81 #define HAVE_MORSE_INPUT
  82
  83 /* Define this if you do software codec */
  84 #define CONFIG_CODEC SWCODEC
  85
  86 /* define this if you have a real-time clock */
  87 #define CONFIG_RTC RTC_PCF50605
  88
  89 /* Define if the device can wake from an RTC alarm */
  90 #define HAVE_RTC_ALARM
  91
  92 /* Define this if you can switch on/off the accessory power supply */
  93 #define HAVE_ACCESSORY_SUPPLY
  94
  95 /* Define this if you have a software controlled poweroff */
  96 #define HAVE_SW_POWEROFF
  97
  98 /* The number of bytes reserved for loadable codecs */
  99 #define CODEC_SIZE 0x100000
 100
 101 /* The number of bytes reserved for loadable plugins */
 102 #define PLUGIN_BUFFER_SIZE 0x80000
 103
 104 /* Define this if you have the WM8721 audio codec */
 105 #define HAVE_WM8731
 106
 107 /* WM8721 has no tone controls, so we use the software ones */
 108 #define HAVE_SW_TONE_CONTROLS
 109
 110 #define AB_REPEAT_ENABLE 1
 111 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
 112
 113 /* define this if you have a disk storage, i.e. something
 114    that needs spinups and can cause skips when shaked */
 115 #define HAVE_DISK_STORAGE
 116
 117 /* Define this for LCD backlight available */
 118 #define HAVE_BACKLIGHT
 119
 120 /* We can fade the backlight by using PWM */
 121 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
 122
 123 /* Define this if you can detect headphones */
 124 #define HAVE_HEADPHONE_DETECTION
 125
 126 #define BATTERY_CAPACITY_DEFAULT 400 /* default battery capacity */
 127 #define BATTERY_CAPACITY_MIN     400 /* min. capacity selectable */
 128 #define BATTERY_CAPACITY_MAX    1000 /* max. capacity selectable */
 129 #define BATTERY_CAPACITY_INC      10 /* capacity increment */
 130 #define BATTERY_TYPES_COUNT        1 /* only one type */
 131
 132 /* define current usage levels */
 133 #define CURRENT_NORMAL     50  /* PP5024 uses ~40mA, so add some for disk */
 134 #define CURRENT_BACKLIGHT  20  /* FIXME: This needs to be measured */
 135 #define CURRENT_RECORD    110  /* FIXME: Needs to be measured */
 136
 137 /* Hardware controlled charging? */
 138 #define CONFIG_CHARGING CHARGING_MONITOR
 139
 140 /* define this if the unit can be powered or charged via USB */
 141 #define HAVE_USB_POWER
 142
 143 /* Define this if you have a PortalPlayer PP5020 */
 144 #define CONFIG_CPU PP5020
 145
 146 /* Define this if you want to use the PP5020 i2c interface */
 147 #define CONFIG_I2C I2C_PP5020
 148
 149 /* We're able to shut off power to the HDD */
 150 #define HAVE_ATA_POWER_OFF
 151
 152 /* define this if the hardware can be powered off while charging */
 153 //#define HAVE_POWEROFF_WHILE_CHARGING
 154
 155 /* The start address index for ROM builds */
 156 #define ROM_START 0x00000000
 157
 158 /* The size of the flash ROM */
 159 #define FLASH_SIZE 0x100000
 160
 161 /* Define this to the CPU frequency */
 162 #define CPU_FREQ      11289600
 163
 164 #define CONFIG_LCD LCD_IPODMINI
 165
 166 /* Offset ( in the firmware file's header ) to the file length */
 167 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 168
 169 /* Offset ( in the firmware file's header ) to the file CRC */
 170 #define FIRMWARE_OFFSET_FILE_CRC 0
 171
 172 /* Offset ( in the firmware file's header ) to the real data */
 173 #define FIRMWARE_OFFSET_FILE_DATA 8
 174
 175 /* USB On-the-go */
 176 #define CONFIG_USBOTG USBOTG_ARC
 177
 178 /* enable these for the experimental usb stack */
 179 #define HAVE_USBSTACK
 180 #define USE_ROCKBOX_USB
 181 #define USB_VENDOR_ID 0x05ac
 182 #define USB_PRODUCT_ID 0x1205
 183 #define HAVE_USB_HID_MOUSE
 184
 185 /* Define this if you have adjustable CPU frequency */
 186 #define HAVE_ADJUSTABLE_CPU_FREQ
 187
 188 #define BOOTFILE_EXT "ipod"
 189 #define BOOTFILE "rockbox." BOOTFILE_EXT
 190 #define BOOTDIR "/.rockbox"
 191
 192 #define ICODE_ATTR_TREMOR_NOT_MDCT
 193
 194 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 195
 196
 197 /* DMA is used only for reading on PP502x because although reads are ~8x faster
 198  * writes appear to be ~25% slower.
 199  */
 200 #define HAVE_ATA_DMA