firmware/export/config-gigabeat.h

   1 /*
   2  * This config file is for toshiba Gigabeat F
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define TOSHIBA_GIGABEAT_F 1
   7
   8 /* For Rolo and boot loader */
   9 #define MODEL_NUMBER 18
  10
  11 /* define this if you use an ATA controller */
  12 #define HAVE_ATA
  13
  14 /* define this if you have a bitmap LCD display */
  15 #define HAVE_LCD_BITMAP
  16
  17 /* define this if you have a colour LCD */
  18 #define HAVE_LCD_COLOR
  19
  20 /* define this if you want album art for this target */
  21 #define HAVE_ALBUMART
  22
  23 /* define this if you have access to the quickscreen */
  24 #define HAVE_QUICKSCREEN
  25
  26 /* define this if you have access to the pitchscreen */
  27 #define HAVE_PITCHSCREEN
  28
  29 /* define this if you would like tagcache to build on this target */
  30 #define HAVE_TAGCACHE
  31
  32 /* define this if the target has volume keys which can be used in the lists */
  33 #define HAVE_VOLUME_IN_LIST
  34
  35 /* LCD dimensions */
  36 #define LCD_WIDTH  240
  37 #define LCD_HEIGHT 320
  38 #define LCD_DEPTH  16   /* 65k colours */
  39 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  40
  41 #ifndef BOOTLOADER
  42 /* Define this if your LCD can be enabled/disabled */
  43 #define HAVE_LCD_ENABLE
  44
  45 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  46    should be defined as well. */
  47 #define HAVE_LCD_SLEEP
  48 /* We don't use a setting but a fixed delay after the backlight has
  49  * turned off */
  50 #define LCD_SLEEP_TIMEOUT (5*HZ)
  51
  52 #define HAVE_TOUCHPAD_SENSITIVITY_SETTING
  53 #endif /* BOOTLOADER */
  54
  55 #define CONFIG_KEYPAD GIGABEAT_PAD
  56
  57 /* Define this if you do software codec */
  58 #define CONFIG_CODEC SWCODEC
  59
  60 /* define this if you have a real-time clock */
  61 #define CONFIG_RTC RTC_S3C2440
  62
  63 /* Define this for LCD backlight available */
  64 #define HAVE_BACKLIGHT
  65
  66 #define HAVE_BUTTON_LIGHT
  67
  68 #define HAVE_BACKLIGHT_BRIGHTNESS
  69
  70 #define HAVE_BUTTONLIGHT_BRIGHTNESS
  71
  72 /* Main LCD backlight brightness range and defaults */
  73 #define MIN_BRIGHTNESS_SETTING          1   /* 0.5 mA */
  74 #define MAX_BRIGHTNESS_SETTING          12  /* 32 mA */
  75 #define DEFAULT_BRIGHTNESS_SETTING      10  /* 16 mA */
  76
  77 /* Define this if you have a software controlled poweroff */
  78 #define HAVE_SW_POWEROFF
  79
  80 /* The number of bytes reserved for loadable codecs */
  81 #define CODEC_SIZE 0x80000
  82
  83 /* The number of bytes reserved for loadable plugins */
  84 #define PLUGIN_BUFFER_SIZE 0x80000
  85
  86 #define AB_REPEAT_ENABLE 1
  87
  88 /* Define this if you have the WM8975 audio codec */
  89 #define HAVE_WM8751
  90
  91 /* Define this if you want to use the adaptive bass capibility of the 8751 */
  92 /* #define USE_ADAPTIVE_BASS */
  93
  94 #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | \
  95                        SAMPR_CAP_11)
  96
  97 #define HAVE_HEADPHONE_DETECTION
  98
  99 #define BATTERY_CAPACITY_DEFAULT 2000 /* default battery capacity */
 100 #define BATTERY_CAPACITY_MIN 1500        /* min. capacity selectable */
 101 #define BATTERY_CAPACITY_MAX 2500        /* max. capacity selectable */
 102 #define BATTERY_CAPACITY_INC 25         /* capacity increment */
 103 #define BATTERY_TYPES_COUNT  1          /* only one type */
 104
 105 /* Hardware controlled charging with monitoring */
 106 #define CONFIG_CHARGING CHARGING_MONITOR
 107
 108 /* define this if the unit can be powered or charged via USB */
 109 #define HAVE_USB_POWER
 110
 111 #ifndef SIMULATOR
 112
 113 /* The LCD on a Gigabeat is 240x320 - it is portrait */
 114 #define HAVE_PORTRAIT_LCD
 115
 116 #define HAVE_LCD_FLIP
 117
 118 /* Define this if your LCD can set contrast */
 119 #define HAVE_LCD_CONTRAST
 120
 121 #define MIN_CONTRAST_SETTING        0
 122 #define MAX_CONTRAST_SETTING        63
 123 #define DEFAULT_CONTRAST_SETTING    47 /* Match boot contrast */
 124
 125 /* LCD invert - does not currently work */
 126 /* #define HAVE_LCD_INVERT */
 127
 128 /* Define this if you have a Motorola SCF5249 */
 129 #define CONFIG_CPU S3C2440
 130
 131 /* Define this if you want to use coldfire's i2c interface */
 132 #define CONFIG_I2C I2C_S3C2440
 133
 134 /* define this if the hardware can be powered off while charging */
 135 #define HAVE_POWEROFF_WHILE_CHARGING
 136
 137 /* The size of the flash ROM */
 138 #define FLASH_SIZE 0x400000
 139
 140 /* Define this to the CPU frequency */
 141 #define CPU_FREQ 16934400
 142
 143 /* Define this if you have ATA power-off control */
 144 #define HAVE_ATA_POWER_OFF
 145
 146 /* Virtual LED (icon) */
 147 #define CONFIG_LED LED_VIRTUAL
 148
 149 #define CONFIG_LCD LCD_GIGABEAT
 150
 151 /* define this if the backlight can be set to a brightness */
 152 #define HAVE_BACKLIGHT_SET_FADING
 153 #define __BACKLIGHT_INIT
 154
 155 /* Offset ( in the firmware file's header ) to the file CRC */
 156 #define FIRMWARE_OFFSET_FILE_CRC 0
 157
 158 /* Offset ( in the firmware file's header ) to the real data */
 159 #define FIRMWARE_OFFSET_FILE_DATA 8
 160
 161 /* Define this if you have adjustable CPU frequency */
 162 /* #define HAVE_ADJUSTABLE_CPU_FREQ */
 163
 164 #define BOOTFILE_EXT "gigabeat"
 165 #define BOOTFILE "rockbox." BOOTFILE_EXT
 166 #define BOOTDIR "/.rockbox"
 167
 168 #endif