firmware/export/config-ipod4g.h

   1 /*
   2  * This config file is for the Apple iPod 4g Grayscale
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 #define MODEL_NAME   "Apple iPod 4g Grayscale"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 8
  12
  13 /* define this if you use an ATA controller */
  14 #define HAVE_ATA
  15
  16 /* define this if you have recording possibility */
  17 #define HAVE_RECORDING
  18
  19 /* Define bitmask of input sources - recordable bitmask can be defined
  20    explicitly if different */
  21 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN)
  22
  23 /* define the bitmask of hardware sample rates */
  24 #define HW_SAMPR_CAPS   (SAMPR_CAP_44)
  25
  26 /* define the bitmask of recording sample rates */
  27 #define REC_SAMPR_CAPS  (SAMPR_CAP_44)
  28
  29 /* define this if you have a bitmap LCD display */
  30 #define HAVE_LCD_BITMAP
  31
  32 /* define this if you want album art for this target */
  33 #define HAVE_ALBUMART
  34
  35 /* define this if you can invert the colours on your LCD */
  36 #define HAVE_LCD_INVERT
  37
  38 /* define this if the LCD needs to be shutdown */
  39 #define HAVE_LCD_SHUTDOWN
  40
  41 /* define this if you have access to the quickscreen */
  42 #define HAVE_QUICKSCREEN
  43 /* define this if you have access to the pitchscreen */
  44 #define HAVE_PITCHSCREEN
  45
  46 /* define this if you would like tagcache to build on this target */
  47 #define HAVE_TAGCACHE
  48
  49 /* LCD dimensions */
  50 #define LCD_WIDTH  160
  51 #define LCD_HEIGHT 128
  52 #define LCD_DEPTH  2   /* 4 colours - 2bpp */
  53 #define LCD_PIXELFORMAT HORIZONTAL_PACKING
  54
  55 #define HAVE_LCD_CONTRAST
  56
  57 /* LCD contrast */
  58 #define MIN_CONTRAST_SETTING        5
  59 #define MAX_CONTRAST_SETTING        63
  60 #define DEFAULT_CONTRAST_SETTING    40 /* Match boot contrast */
  61
  62 /* define this if you can flip your LCD */
  63 #define HAVE_LCD_FLIP
  64
  65 #define CONFIG_KEYPAD IPOD_4G_PAD
  66
  67 /* Define this if you do software codec */
  68 #define CONFIG_CODEC SWCODEC
  69
  70 /* define this if you have a real-time clock */
  71 #define CONFIG_RTC RTC_PCF50605
  72
  73 /* Define if the device can wake from an RTC alarm */
  74 #define HAVE_RTC_ALARM
  75
  76 /* Define this if you can switch on/off the accessory power supply */
  77 #define HAVE_ACCESSORY_SUPPLY
  78
  79 /* Define this if you have a software controlled poweroff */
  80 #define HAVE_SW_POWEROFF
  81
  82 /* The number of bytes reserved for loadable codecs */
  83 #define CODEC_SIZE 0x80000
  84
  85 /* The number of bytes reserved for loadable plugins */
  86 #define PLUGIN_BUFFER_SIZE 0x80000
  87
  88 /* Define this if you have the WM8975 audio codec */
  89 #define HAVE_WM8975
  90
  91 #define AB_REPEAT_ENABLE 1
  92 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
  93
  94 /* define this if you have a disk storage, i.e. something
  95    that needs spinups and can cause skips when shaked */
  96 #define HAVE_DISK_STORAGE
  97
  98 /* Define this for LCD backlight available */
  99 #define HAVE_BACKLIGHT
 100
 101 /* define this if the unit uses a scrollwheel for navigation */
 102 #define HAVE_SCROLLWHEEL
 103 /* define from which rotation speed [degree/sec] on the acceleration starts */
 104 #define WHEEL_ACCEL_START 270
 105 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 106 #define WHEEL_ACCELERATION 3
 107
 108 /* Define this if you can detect headphones */
 109 #define HAVE_HEADPHONE_DETECTION
 110
 111 #define BATTERY_CAPACITY_DEFAULT 630 /* default battery capacity */
 112 #define BATTERY_CAPACITY_MIN 630  /* min. capacity selectable */
 113 #define BATTERY_CAPACITY_MAX 1200 /* max. capacity selectable */
 114 #define BATTERY_CAPACITY_INC 10   /* capacity increment */
 115 #define BATTERY_TYPES_COUNT  1    /* only one type */
 116
 117 /* Hardware controlled charging? */
 118 #define CONFIG_CHARGING CHARGING_MONITOR
 119
 120 /* define this if the unit can be powered or charged via USB */
 121 #define HAVE_USB_POWER
 122
 123 #ifndef SIMULATOR
 124
 125 /* Define this if you have a PortalPlayer PP5020 */
 126 #define CONFIG_CPU PP5020
 127
 128 /* Define this if you want to use the PP5020 i2c interface */
 129 #define CONFIG_I2C I2C_PP5020
 130
 131 /* We're able to shut off power to the HDD */
 132 #define HAVE_ATA_POWER_OFF
 133
 134 /* define this if the hardware can be powered off while charging */
 135 //#define HAVE_POWEROFF_WHILE_CHARGING
 136
 137 /* The start address index for ROM builds */
 138 #define ROM_START 0x00000000
 139
 140 /* The size of the flash ROM */
 141 #define FLASH_SIZE 0x100000
 142
 143 /* Define this to the CPU frequency */
 144 #define CPU_FREQ      11289600
 145
 146 #define CONFIG_LCD LCD_IPOD2BPP
 147
 148 /* Offset ( in the firmware file's header ) to the file length */
 149 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 150
 151 /* Offset ( in the firmware file's header ) to the file CRC */
 152 #define FIRMWARE_OFFSET_FILE_CRC 0
 153
 154 /* Offset ( in the firmware file's header ) to the real data */
 155 #define FIRMWARE_OFFSET_FILE_DATA 8
 156
 157 #define USB_IPODSTYLE
 158
 159 /* USB On-the-go */
 160 #define CONFIG_USBOTG USBOTG_ARC
 161
 162 /* enable these for the experimental usb stack */
 163 #define HAVE_USBSTACK
 164 #define USB_VENDOR_ID 0x05ac
 165 #define USB_PRODUCT_ID 0x1203
 166
 167 /* Virtual LED (icon) */
 168 #define CONFIG_LED LED_VIRTUAL
 169
 170 /* Define this if you have adjustable CPU frequency */
 171 #define HAVE_ADJUSTABLE_CPU_FREQ
 172
 173 /* Define this if you can read an absolute wheel position */
 174 #define HAVE_WHEEL_POSITION
 175
 176 #define BOOTFILE_EXT "ipod"
 177 #define BOOTFILE "rockbox." BOOTFILE_EXT
 178 #define BOOTDIR "/.rockbox"
 179
 180 #define ICODE_ATTR_TREMOR_NOT_MDCT
 181
 182 #endif