firmware/backlight.c

   1 /***************************************************************************
   2  *             __________               __   ___.
   3  *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
   4  *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
   5  *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
   6  *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
   7  *                     \/            \/     \/    \/            \/
   8  * $Id$
   9  *
  10  * Copyright (C) 2002 by Linus Nielsen Feltzing
  11  * Additional work by Martin Ritter (2007) and Thomas Martitz (2008)
  12  *                  for backlight thread fading
  13  *
  14  * This program is free software; you can redistribute it and/or
  15  * modify it under the terms of the GNU General Public License
  16  * as published by the Free Software Foundation; either version 2
  17  * of the License, or (at your option) any later version.
  18  *
  19  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  20  * KIND, either express or implied.
  21  *
  22  ****************************************************************************/
  23 #include "config.h"
  24 #include <stdlib.h>
  25 #include "cpu.h"
  26 #include "kernel.h"
  27 #include "thread.h"
  28 #include "i2c.h"
  29 #include "debug.h"
  30 #include "rtc.h"
  31 #include "usb.h"
  32 #include "power.h"
  33 #include "system.h"
  34 #include "button.h"
  35 #include "timer.h"
  36 #include "backlight.h"
  37 #include "lcd.h"
  38
  39 #ifdef HAVE_REMOTE_LCD
  40 #include "lcd-remote.h"
  41 #endif
  42 #ifndef SIMULATOR
  43 #include "backlight-target.h"
  44 #endif
  45
  46 #if !defined(BOOTLOADER)
  47 /* The whole driver should be built */
  48 #define BACKLIGHT_FULL_INIT
  49 #endif
  50
  51 #ifdef HAVE_BACKLIGHT_BRIGHTNESS
  52 int backlight_brightness = DEFAULT_BRIGHTNESS_SETTING;
  53 #endif
  54
  55 #ifdef USE_BACKLIGHT_SW_FADING
  56 #include "backlight-sw-fading.h"
  57 #endif
  58 #ifdef SIMULATOR
  59 /* TODO: find a better way to do it but we need a kernel thread somewhere to
  60    handle this */
  61 extern void screen_dump(void);
  62
  63 static inline void _backlight_on(void)
  64 {
  65     sim_backlight(100);
  66 }
  67
  68 static inline void _backlight_off(void)
  69 {
  70     sim_backlight(0);
  71 }
  72
  73 static inline void _backlight_set_brightness(int val)
  74 {
  75     (void)val;
  76 }
  77
  78 static inline void _buttonlight_on(void)
  79 {
  80 }
  81
  82 static inline void _buttonlight_off(void)
  83 {
  84 }
  85
  86 static inline void _buttonlight_set_brightness(int val)
  87 {
  88     (void)val;
  89 }
  90 #ifdef HAVE_REMOTE_LCD
  91 static inline void _remote_backlight_on(void)
  92 {
  93     sim_remote_backlight(100);
  94 }
  95
  96 static inline void _remote_backlight_off(void)
  97 {
  98     sim_remote_backlight(0);
  99 }
 100 #endif /* HAVE_REMOTE_LCD */
 101
 102 #endif /* SIMULATOR */
 103
 104 #if defined(HAVE_BACKLIGHT) && defined(BACKLIGHT_FULL_INIT)
 105
 106 enum {
 107     BACKLIGHT_ON,
 108     BACKLIGHT_OFF,
 109 #ifdef HAVE_REMOTE_LCD
 110     REMOTE_BACKLIGHT_ON,
 111     REMOTE_BACKLIGHT_OFF,
 112 #endif
 113 #if defined(_BACKLIGHT_FADE_BOOST) || defined(_BACKLIGHT_FADE_ENABLE)
 114     BACKLIGHT_FADE_FINISH,
 115 #endif
 116 #ifdef HAVE_LCD_SLEEP
 117     LCD_SLEEP,
 118 #endif
 119 #ifdef HAVE_BUTTON_LIGHT
 120     BUTTON_LIGHT_ON,
 121     BUTTON_LIGHT_OFF,
 122 #endif
 123 #ifdef BACKLIGHT_DRIVER_CLOSE
 124     BACKLIGHT_QUIT,
 125 #endif
 126 };
 127
 128 static void backlight_thread(void);
 129 static long backlight_stack[DEFAULT_STACK_SIZE/sizeof(long)];
 130 static const char backlight_thread_name[] = "backlight";
 131 static struct event_queue backlight_queue;
 132 #ifdef BACKLIGHT_DRIVER_CLOSE
 133 static unsigned int backlight_thread_id = 0;
 134 #endif
 135
 136 static int backlight_timer SHAREDBSS_ATTR;
 137 static int backlight_timeout SHAREDBSS_ATTR;
 138 static int backlight_timeout_normal = 5*HZ;
 139 #if CONFIG_CHARGING
 140 static int backlight_timeout_plugged = 5*HZ;
 141 #endif
 142 #ifdef HAS_BUTTON_HOLD
 143 static int backlight_on_button_hold = 0;
 144 #endif
 145
 146 #ifdef HAVE_BUTTON_LIGHT
 147 static int buttonlight_timer;
 148 int _buttonlight_timeout = 5*HZ;
 149
 150 /* Update state of buttonlight according to timeout setting */
 151 static void buttonlight_update_state(void)
 152 {
 153     buttonlight_timer = _buttonlight_timeout;
 154
 155     /* Buttonlight == OFF in the setting? */
 156     if (buttonlight_timer < 0)
 157     {
 158         buttonlight_timer = 0; /* Disable the timeout */
 159         _buttonlight_off();
 160     }
 161     else
 162         _buttonlight_on();
 163 }
 164
 165 /* external interface */
 166 void buttonlight_on(void)
 167 {
 168     queue_remove_from_head(&backlight_queue, BUTTON_LIGHT_ON);
 169     queue_post(&backlight_queue, BUTTON_LIGHT_ON, 0);
 170 }
 171
 172 void buttonlight_off(void)
 173 {
 174     queue_post(&backlight_queue, BUTTON_LIGHT_OFF, 0);
 175 }
 176
 177 void buttonlight_set_timeout(int value)
 178 {
 179     _buttonlight_timeout = HZ * value;
 180     buttonlight_update_state();
 181 }
 182
 183 #endif /* HAVE_BUTTON_LIGHT */
 184
 185 #ifdef HAVE_REMOTE_LCD
 186 static int remote_backlight_timer;
 187 static int remote_backlight_timeout;
 188 static int remote_backlight_timeout_normal = 5*HZ;
 189 #if CONFIG_CHARGING
 190 static int remote_backlight_timeout_plugged = 5*HZ;
 191 #endif
 192 #ifdef HAS_REMOTE_BUTTON_HOLD
 193 static int remote_backlight_on_button_hold = 0;
 194 #endif
 195 #endif /* HAVE_REMOTE_LCD */
 196
 197 #ifdef HAVE_LCD_SLEEP
 198 #ifdef HAVE_LCD_SLEEP_SETTING
 199 const signed char lcd_sleep_timeout_value[10] =
 200 {
 201     -1, 0, 5, 10, 15, 20, 30, 45, 60, 90
 202 };
 203 static int lcd_sleep_timeout = 10*HZ;
 204 #else
 205 /* Target defines needed value */
 206 static const int lcd_sleep_timeout = LCD_SLEEP_TIMEOUT;
 207 #endif
 208
 209 static int lcd_sleep_timer = 0;
 210
 211 void backlight_lcd_sleep_countdown(bool start)
 212 {
 213     if (!start)
 214     {
 215         /* Cancel the LCD sleep countdown */
 216         lcd_sleep_timer = 0;
 217         return;
 218     }
 219
 220     /* Start LCD sleep countdown */
 221     if (lcd_sleep_timeout < 0)
 222     {
 223         lcd_sleep_timer = 0; /* Setting == Always */
 224         lcd_sleep();
 225     }
 226     else
 227     {
 228         lcd_sleep_timer = lcd_sleep_timeout;
 229     }
 230 }
 231 #endif /* HAVE_LCD_SLEEP */
 232
 233 #ifdef USE_BACKLIGHT_SW_FADING
 234 static int backlight_fading_type = (FADING_UP|FADING_DOWN);
 235 static int backlight_fading_state = NOT_FADING;
 236 #endif
 237
 238
 239 #if defined(HAVE_BACKLIGHT_PWM_FADING) && !defined(SIMULATOR)
 240 /* backlight fading */
 241 #define BL_PWM_INTERVAL 5  /* Cycle interval in ms */
 242 #define BL_PWM_BITS     8
 243 #define BL_PWM_COUNT    (1<<BL_PWM_BITS)
 244
 245 /* s15.16 fixed point variables */
 246 static int32_t bl_fade_in_step  = ((BL_PWM_INTERVAL*BL_PWM_COUNT)<<16)/300;
 247 static int32_t bl_fade_out_step = ((BL_PWM_INTERVAL*BL_PWM_COUNT)<<16)/2000;
 248 static int32_t bl_dim_fraction  = 0;
 249
 250 static int bl_dim_target  = 0;
 251 static int bl_dim_current = 0;
 252 static enum {DIM_STATE_START, DIM_STATE_MAIN} bl_dim_state = DIM_STATE_START;
 253 static bool bl_timer_active = false;
 254
 255 static void backlight_isr(void)
 256 {
 257     int timer_period = (TIMER_FREQ*BL_PWM_INTERVAL/1000);
 258     bool idle = false;
 259
 260     switch (bl_dim_state)
 261     {
 262       /* New cycle */
 263       case DIM_STATE_START:
 264         bl_dim_current = bl_dim_fraction >> 16;
 265
 266         if (bl_dim_current > 0 && bl_dim_current < BL_PWM_COUNT)
 267         {
 268             _backlight_on_isr();
 269             timer_period = (timer_period * bl_dim_current) >> BL_PWM_BITS;
 270             bl_dim_state = DIM_STATE_MAIN;
 271         }
 272         else
 273         {
 274             if (bl_dim_current)
 275                 _backlight_on_isr();
 276             else
 277                 _backlight_off_isr();
 278             if (bl_dim_current == bl_dim_target)
 279                 idle = true;
 280         }
 281         if (bl_dim_current < bl_dim_target)
 282         {
 283             bl_dim_fraction = MIN(bl_dim_fraction + bl_fade_in_step,
 284                                   (BL_PWM_COUNT<<16));
 285         }
 286         else if (bl_dim_current > bl_dim_target)
 287         {
 288             bl_dim_fraction = MAX(bl_dim_fraction - bl_fade_out_step, 0);
 289         }
 290         break;
 291
 292       /* Dim main screen */
 293       case DIM_STATE_MAIN:
 294         _backlight_off_isr();
 295         timer_period = (timer_period * (BL_PWM_COUNT - bl_dim_current))
 296                      >> BL_PWM_BITS;
 297         bl_dim_state = DIM_STATE_START;
 298         break ;
 299     }
 300     if (idle)
 301     {
 302 #if defined(_BACKLIGHT_FADE_BOOST) || defined(_BACKLIGHT_FADE_ENABLE)
 303         queue_post(&backlight_queue, BACKLIGHT_FADE_FINISH, 0);
 304 #endif
 305         timer_unregister();
 306         bl_timer_active = false;
 307     }
 308     else
 309         timer_set_period(timer_period);
 310 }
 311
 312 static void backlight_switch(void)
 313 {
 314     if (bl_dim_target > (BL_PWM_COUNT/2))
 315     {
 316         _backlight_on_normal();
 317         bl_dim_fraction = (BL_PWM_COUNT<<16);
 318     }
 319     else
 320     {
 321         _backlight_off_normal();
 322         bl_dim_fraction = 0;
 323     }
 324 }
 325
 326 static void backlight_release_timer(void)
 327 {
 328 #ifdef _BACKLIGHT_FADE_BOOST
 329     cpu_boost(false);
 330 #endif
 331     timer_unregister();
 332     bl_timer_active = false;
 333     backlight_switch();
 334 }
 335
 336 static void backlight_dim(int value)
 337 {
 338     /* protect from extraneous calls with the same target value */
 339     if (value == bl_dim_target)
 340         return;
 341
 342     bl_dim_target = value;
 343
 344     if (bl_timer_active)
 345         return ;
 346
 347     if (timer_register(0, backlight_release_timer, 2, 0, backlight_isr
 348                        IF_COP(, CPU)))
 349     {
 350 #ifdef _BACKLIGHT_FADE_BOOST
 351         /* Prevent cpu frequency changes while dimming. */
 352         cpu_boost(true);
 353 #endif
 354         bl_timer_active = true;
 355     }
 356     else
 357         backlight_switch();
 358 }
 359
 360 static void _backlight_on(void)
 361 {
 362 #ifdef HAVE_LCD_SLEEP
 363     backlight_lcd_sleep_countdown(false);
 364 #endif
 365
 366     if (bl_fade_in_step > 0)
 367     {
 368 #ifdef _BACKLIGHT_FADE_ENABLE
 369         _backlight_hw_enable(true);
 370 #endif
 371         backlight_dim(BL_PWM_COUNT);
 372     }
 373     else
 374     {
 375         bl_dim_target = BL_PWM_COUNT;
 376         bl_dim_fraction = (BL_PWM_COUNT<<16);
 377         _backlight_on_normal();
 378     }
 379 }
 380
 381 static void _backlight_off(void)
 382 {
 383     if (bl_fade_out_step > 0)
 384     {
 385         backlight_dim(0);
 386     }
 387     else
 388     {
 389         bl_dim_target = bl_dim_fraction = 0;
 390         _backlight_off_normal();
 391     }
 392
 393 #ifdef HAVE_LCD_SLEEP
 394     backlight_lcd_sleep_countdown(true);
 395 #endif
 396 }
 397
 398 void backlight_set_fade_in(int value)
 399 {
 400     if (value > 0)
 401         bl_fade_in_step = ((BL_PWM_INTERVAL*BL_PWM_COUNT)<<16) / value;
 402     else
 403         bl_fade_in_step = 0;
 404 }
 405
 406 void backlight_set_fade_out(int value)
 407 {
 408     if (value > 0)
 409         bl_fade_out_step = ((BL_PWM_INTERVAL*BL_PWM_COUNT)<<16) / value;
 410     else
 411         bl_fade_out_step = 0;
 412 }
 413 #endif /* defined(HAVE_BACKLIGHT_PWM_FADING) && !defined(SIMULATOR) */
 414
 415 #ifdef USE_BACKLIGHT_SW_FADING
 416
 417 void backlight_set_fade_out(bool value)
 418 {
 419     if(value) /* on */
 420         backlight_fading_type |= FADING_DOWN;
 421     else
 422         backlight_fading_type &= FADING_UP;
 423 }
 424
 425 void backlight_set_fade_in(bool value)
 426 {
 427     if(value) /* on */
 428         backlight_fading_type |= FADING_UP;
 429     else
 430         backlight_fading_type &= FADING_DOWN;
 431 }
 432
 433 static void backlight_set_up_fade_up(void)
 434 {
 435     if (backlight_fading_type & FADING_UP)
 436     {
 437         if (backlight_fading_state == NOT_FADING)
 438         {
 439             /* make sure the backlight is at lowest level */
 440             _backlight_on();
 441         }
 442         backlight_fading_state = FADING_UP;
 443     }
 444     else
 445     {
 446         backlight_fading_state = NOT_FADING;
 447         _backlight_fade_update_state(backlight_brightness);
 448         _backlight_on();
 449         _backlight_set_brightness(backlight_brightness);
 450     }
 451 }
 452
 453 static void backlight_set_up_fade_down(void)
 454 {
 455     if (backlight_fading_type & FADING_DOWN)
 456     {
 457         backlight_fading_state = FADING_DOWN;
 458     }
 459     else
 460     {
 461         backlight_fading_state = NOT_FADING;
 462         _backlight_fade_update_state(MIN_BRIGHTNESS_SETTING-1);
 463         _backlight_off();
 464     /* h300/x5/d2 go to the last known brightness level at backight_on(),which
 465      * should be the lowest level to keep fading up glitch free
 466      * targets which set brightness over AS3514 I2C make the backlight on only
 467      * by setting the brightness, so this step would be noticeable */
 468 #if !defined(HAVE_AS3514)
 469         _backlight_set_brightness(MIN_BRIGHTNESS_SETTING);
 470 #endif
 471     }
 472 }
 473 #endif /* USE_BACKLIGHT_SW_FADING */
 474
 475 /* Update state of backlight according to timeout setting */
 476 static void backlight_update_state(void)
 477 {
 478 #ifdef HAS_BUTTON_HOLD
 479     if ((backlight_on_button_hold != 0)
 480 #ifdef HAVE_REMOTE_LCD_AS_MAIN
 481         && remote_button_hold()
 482 #else
 483         && button_hold()
 484 #endif
 485         )
 486         backlight_timeout = (backlight_on_button_hold == 2) ? 0 : -1;
 487         /* always on or always off */
 488     else
 489 #endif
 490 #if CONFIG_CHARGING
 491         if (power_input_present())
 492             backlight_timeout = backlight_timeout_plugged;
 493         else
 494 #endif
 495             backlight_timeout = backlight_timeout_normal;
 496
 497     /* Backlight == OFF in the setting? */
 498     if (UNLIKELY(backlight_timeout < 0))
 499     {
 500         backlight_timer = 0; /* Disable the timeout */
 501 #ifdef USE_BACKLIGHT_SW_FADING
 502         backlight_set_up_fade_down();
 503         /* necessary step to issue fading down when the setting is selected */
 504         queue_post(&backlight_queue, SYS_TIMEOUT, 0);
 505 #else
 506         _backlight_off();
 507 #endif
 508     }
 509     else
 510     {
 511         backlight_timer = backlight_timeout;
 512 #if defined(USE_BACKLIGHT_SW_FADING)
 513         backlight_set_up_fade_up();
 514 #else
 515         _backlight_on();
 516 #endif
 517     }
 518 }
 519
 520 #ifdef HAVE_REMOTE_LCD
 521 /* Update state of remote backlight according to timeout setting */
 522 static void remote_backlight_update_state(void)
 523 {
 524 #ifdef HAS_REMOTE_BUTTON_HOLD
 525     if (remote_button_hold() && (remote_backlight_on_button_hold != 0))
 526         remote_backlight_timeout = (remote_backlight_on_button_hold == 2)
 527                                  ? 0 : -1;  /* always on or always off */
 528     else
 529 #endif
 530 #if CONFIG_CHARGING
 531         if (power_input_present())
 532             remote_backlight_timeout = remote_backlight_timeout_plugged;
 533         else
 534 #endif
 535             remote_backlight_timeout = remote_backlight_timeout_normal;
 536
 537     /* Backlight == OFF in the setting? */
 538     if (remote_backlight_timeout < 0)
 539     {
 540         remote_backlight_timer = 0; /* Disable the timeout */
 541         _remote_backlight_off();
 542     }
 543     else
 544     {
 545         remote_backlight_timer = remote_backlight_timeout;
 546         _remote_backlight_on();
 547     }
 548 }
 549 #endif /* HAVE_REMOTE_LCD */
 550
 551 void backlight_thread(void)
 552 {
 553     struct queue_event ev;
 554     bool locked = false;
 555
 556     while(1)
 557     {
 558 #if defined(USE_BACKLIGHT_SW_FADING)
 559         if (backlight_fading_state)
 560             queue_wait_w_tmo(&backlight_queue, &ev, FADE_DELAY);
 561         else
 562 #endif
 563             queue_wait(&backlight_queue, &ev);
 564 /*
 565 #endif
 566 */
 567         switch(ev.id)
 568         {   /* These events must always be processed */
 569 #ifdef _BACKLIGHT_FADE_BOOST
 570             case BACKLIGHT_FADE_FINISH:
 571                 cpu_boost(false);
 572                 break;
 573 #endif
 574 #ifdef _BACKLIGHT_FADE_ENABLE
 575             case BACKLIGHT_FADE_FINISH:
 576                 _backlight_hw_enable((bl_dim_current|bl_dim_target) != 0);
 577                 break;
 578 #endif
 579
 580 #ifndef SIMULATOR
 581             /* Here for now or else the aggressive init messes up scrolling */
 582 #ifdef HAVE_REMOTE_LCD
 583             case SYS_REMOTE_PLUGGED:
 584                 lcd_remote_on();
 585                 lcd_remote_update();
 586                 break;
 587
 588             case SYS_REMOTE_UNPLUGGED:
 589                 lcd_remote_off();
 590                 break;
 591 #elif defined HAVE_REMOTE_LCD_AS_MAIN
 592             case SYS_REMOTE_PLUGGED:
 593                 lcd_on();
 594                 lcd_update();
 595                 break;
 596
 597             case SYS_REMOTE_UNPLUGGED:
 598                 lcd_off();
 599                 break;
 600 #endif /* HAVE_REMOTE_LCD/ HAVE_REMOTE_LCD_AS_MAIN */
 601 #endif /* !SIMULATOR */
 602 #ifdef SIMULATOR
 603             /* This one here too for lack of a better place */
 604             case SYS_SCREENDUMP:
 605                 screen_dump();
 606                 break;
 607 #endif
 608             case SYS_USB_CONNECTED:
 609                 /* Tell the USB thread that we are safe */
 610                 DEBUGF("backlight_thread got SYS_USB_CONNECTED\n");
 611                 usb_acknowledge(SYS_USB_CONNECTED_ACK);
 612                 break;
 613
 614             case SYS_USB_DISCONNECTED:
 615                 usb_acknowledge(SYS_USB_DISCONNECTED_ACK);
 616                 break;
 617
 618 #ifdef BACKLIGHT_DRIVER_CLOSE
 619             /* Get out of here */
 620             case BACKLIGHT_QUIT:
 621                 return;
 622 #endif
 623         }
 624         if (locked)
 625             continue;
 626
 627         switch(ev.id)
 628         {   /* These events are only processed if backlight isn't locked */
 629 #ifdef HAVE_REMOTE_LCD
 630             case REMOTE_BACKLIGHT_ON:
 631                 remote_backlight_update_state();
 632                 break;
 633
 634             case REMOTE_BACKLIGHT_OFF:
 635                 remote_backlight_timer = 0; /* Disable the timeout */
 636                 _remote_backlight_off();
 637                 break;
 638 #endif /* HAVE_REMOTE_LCD */
 639
 640             case BACKLIGHT_ON:
 641                 backlight_update_state();
 642                 break;
 643
 644             case BACKLIGHT_OFF:
 645                 backlight_timer = 0; /* Disable the timeout */
 646 #ifndef USE_BACKLIGHT_SW_FADING
 647                 _backlight_off();
 648 #else
 649                 backlight_set_up_fade_down();
 650 #endif /* USE_BACKLIGHT_SW_FADING */
 651                 break;
 652 #ifdef HAVE_LCD_SLEEP
 653             case LCD_SLEEP:
 654                 lcd_sleep();
 655                 break;
 656 #endif
 657 #ifdef HAVE_BUTTON_LIGHT
 658             case BUTTON_LIGHT_ON:
 659                 buttonlight_update_state();
 660                 break;
 661
 662             case BUTTON_LIGHT_OFF:
 663                 buttonlight_timer = 0;
 664                 _buttonlight_off();
 665                 break;
 666 #endif
 667
 668             case SYS_POWEROFF:  /* Lock backlight on poweroff so it doesn't */
 669                 locked = true;      /* go off before power is actually cut. */
 670                 /* fall through */
 671 #if CONFIG_CHARGING
 672             case SYS_CHARGER_CONNECTED:
 673             case SYS_CHARGER_DISCONNECTED:
 674 #endif
 675                 backlight_update_state();
 676 #ifdef HAVE_REMOTE_LCD
 677                 remote_backlight_update_state();
 678 #endif
 679                 break;
 680 #if defined(USE_BACKLIGHT_SW_FADING)
 681             case SYS_TIMEOUT:
 682                 if ((_backlight_fade_step(backlight_fading_state)))
 683                     backlight_fading_state = NOT_FADING;
 684                 break;
 685 #endif /* USE_BACKLIGHT_SW_FADING */
 686         }
 687     } /* end while */
 688 }
 689
 690 static void backlight_tick(void)
 691 {
 692     if(backlight_timer)
 693     {
 694         if(--backlight_timer == 0)
 695         {
 696             backlight_off();
 697         }
 698     }
 699 #ifdef HAVE_LCD_SLEEP
 700     else if(lcd_sleep_timer)
 701     {
 702         if(--lcd_sleep_timer == 0)
 703         {
 704             /* Queue on bl thread or freeze! */
 705             queue_post(&backlight_queue, LCD_SLEEP, 0);
 706         }
 707     }
 708 #endif /* HAVE_LCD_SLEEP */
 709 #ifdef HAVE_REMOTE_LCD
 710     if(remote_backlight_timer)
 711     {
 712         if(--remote_backlight_timer == 0)
 713         {
 714             remote_backlight_off();
 715         }
 716     }
 717 #endif /* HAVE_REMOVE_LCD */
 718 #ifdef HAVE_BUTTON_LIGHT
 719     if (buttonlight_timer)
 720     {
 721         if (--buttonlight_timer == 0)
 722         {
 723             buttonlight_off();
 724         }
 725     }
 726 #endif /* HAVE_BUTTON_LIGHT */
 727 }
 728
 729 void backlight_init(void)
 730 {
 731     queue_init(&backlight_queue, true);
 732
 733 #ifndef SIMULATOR
 734     if (_backlight_init())
 735     {
 736 # ifdef HAVE_BACKLIGHT_PWM_FADING
 737         /* If backlight is already on, don't fade in. */
 738         bl_dim_target = BL_PWM_COUNT;
 739         bl_dim_fraction = (BL_PWM_COUNT<<16);
 740 # endif
 741     }
 742 #endif
 743     /* Leave all lights as set by the bootloader here. The settings load will
 744      * call the appropriate backlight_set_*() functions, only changing light
 745      * status if necessary. */
 746 #ifdef BACKLIGHT_DRIVER_CLOSE
 747     backlight_thread_id =
 748 #endif
 749     create_thread(backlight_thread, backlight_stack,
 750                   sizeof(backlight_stack), 0, backlight_thread_name
 751                   IF_PRIO(, PRIORITY_USER_INTERFACE)
 752                   IF_COP(, CPU));
 753     tick_add_task(backlight_tick);
 754 }
 755
 756 #ifdef BACKLIGHT_DRIVER_CLOSE
 757 void backlight_close(void)
 758 {
 759     unsigned int thread = backlight_thread_id;
 760
 761     /* Wait for thread to exit */
 762     if (thread == 0)
 763         return;
 764
 765     backlight_thread_id = 0;
 766
 767     queue_post(&backlight_queue, BACKLIGHT_QUIT, 0);
 768     thread_wait(thread);
 769 }
 770 #endif /* BACKLIGHT_DRIVER_CLOSE */
 771
 772 void backlight_on(void)
 773 {
 774     queue_remove_from_head(&backlight_queue, BACKLIGHT_ON);
 775     queue_post(&backlight_queue, BACKLIGHT_ON, 0);
 776 }
 777
 778 void backlight_off(void)
 779 {
 780     queue_post(&backlight_queue, BACKLIGHT_OFF, 0);
 781 }
 782
 783 /* returns true when the backlight is on,
 784  * and optionally when it's set to always off. */
 785 bool is_backlight_on(bool ignore_always_off)
 786 {
 787     return (backlight_timer > 0)   /* countdown */
 788         || (backlight_timeout == 0) /* always on */
 789         || ((backlight_timeout < 0) && !ignore_always_off);
 790 }
 791
 792 /* return value in ticks; 0 means always on, <0 means always off */
 793 int backlight_get_current_timeout(void)
 794 {
 795     return backlight_timeout;
 796 }
 797
 798 void backlight_set_timeout(int value)
 799 {
 800     backlight_timeout_normal = HZ * value;
 801     backlight_update_state();
 802 }
 803
 804 #if CONFIG_CHARGING
 805 void backlight_set_timeout_plugged(int value)
 806 {
 807     backlight_timeout_plugged = HZ * value;
 808     backlight_update_state();
 809 }
 810 #endif /* CONFIG_CHARGING */
 811
 812 #ifdef HAS_BUTTON_HOLD
 813 /* Hold button change event handler. */
 814 void backlight_hold_changed(bool hold_button)
 815 {
 816     if (!hold_button || (backlight_on_button_hold > 0))
 817         /* if unlocked or override in effect */
 818         backlight_on();
 819 }
 820
 821 void backlight_set_on_button_hold(int index)
 822 {
 823     if ((unsigned)index >= 3)
 824         /* if given a weird value, use default */
 825         index = 0;
 826
 827     backlight_on_button_hold = index;
 828     backlight_update_state();
 829 }
 830 #endif /* HAS_BUTTON_HOLD */
 831
 832 #ifdef HAVE_LCD_SLEEP_SETTING
 833 void lcd_set_sleep_after_backlight_off(int index)
 834 {
 835     if ((unsigned)index >= sizeof(lcd_sleep_timeout_value))
 836         /* if given a weird value, use default */
 837         index = 3;
 838
 839     lcd_sleep_timeout = HZ * lcd_sleep_timeout_value[index];
 840
 841     if (backlight_timer > 0 || backlight_get_current_timeout() == 0)
 842         /* Timer will be set when bl turns off or bl set to on. */
 843         return;
 844
 845     /* Backlight is Off */
 846     if (lcd_sleep_timeout < 0)
 847         lcd_sleep_timer = 1; /* Always - sleep next tick */
 848     else
 849         lcd_sleep_timer = lcd_sleep_timeout; /* Never, other */
 850 }
 851 #endif /* HAVE_LCD_SLEEP_SETTING */
 852
 853 #ifdef HAVE_REMOTE_LCD
 854 void remote_backlight_on(void)
 855 {
 856     queue_post(&backlight_queue, REMOTE_BACKLIGHT_ON, 0);
 857 }
 858
 859 void remote_backlight_off(void)
 860 {
 861     queue_post(&backlight_queue, REMOTE_BACKLIGHT_OFF, 0);
 862 }
 863
 864 void remote_backlight_set_timeout(int value)
 865 {
 866     remote_backlight_timeout_normal = HZ * value;
 867     remote_backlight_update_state();
 868 }
 869
 870 #if CONFIG_CHARGING
 871 void remote_backlight_set_timeout_plugged(int value)
 872 {
 873     remote_backlight_timeout_plugged = HZ * value;
 874     remote_backlight_update_state();
 875 }
 876 #endif /* CONFIG_CHARGING */
 877
 878 #ifdef HAS_REMOTE_BUTTON_HOLD
 879 /* Remote hold button change event handler. */
 880 void remote_backlight_hold_changed(bool rc_hold_button)
 881 {
 882     if (!rc_hold_button || (remote_backlight_on_button_hold > 0))
 883         /* if unlocked or override */
 884         remote_backlight_on();
 885 }
 886
 887 void remote_backlight_set_on_button_hold(int index)
 888 {
 889     if ((unsigned)index >= 3)
 890         /* if given a weird value, use default */
 891         index = 0;
 892
 893     remote_backlight_on_button_hold = index;
 894     remote_backlight_update_state();
 895 }
 896 #endif /* HAS_REMOTE_BUTTON_HOLD */
 897
 898 /* return value in ticks; 0 means always on, <0 means always off */
 899 int remote_backlight_get_current_timeout(void)
 900 {
 901     return remote_backlight_timeout;
 902 }
 903
 904 /* returns true when the backlight is on, and
 905  * optionally  when it's set to always off */
 906 bool is_remote_backlight_on(bool ignore_always_off)
 907 {
 908     return (remote_backlight_timer > 0)   /* countdown */
 909         || (remote_backlight_timeout == 0) /* always on */
 910         || ((remote_backlight_timeout < 0) && !ignore_always_off);
 911 }
 912
 913 #endif /* HAVE_REMOTE_LCD */
 914
 915 #ifdef HAVE_BACKLIGHT_BRIGHTNESS
 916 void backlight_set_brightness(int val)
 917 {
 918     if (val < MIN_BRIGHTNESS_SETTING)
 919         val = MIN_BRIGHTNESS_SETTING;
 920     else if (val > MAX_BRIGHTNESS_SETTING)
 921         val = MAX_BRIGHTNESS_SETTING;
 922
 923     backlight_brightness = val;
 924     _backlight_set_brightness(val);
 925 #ifdef USE_BACKLIGHT_SW_FADING
 926     /* receive backlight brightness */
 927     _backlight_fade_update_state(val);
 928 #endif
 929 }
 930 #endif /* HAVE_BACKLIGHT_BRIGHTNESS */
 931
 932 #ifdef HAVE_BUTTONLIGHT_BRIGHTNESS
 933 void buttonlight_set_brightness(int val)
 934 {
 935     if (val < MIN_BRIGHTNESS_SETTING)
 936         val = MIN_BRIGHTNESS_SETTING;
 937     else if (val > MAX_BRIGHTNESS_SETTING)
 938         val = MAX_BRIGHTNESS_SETTING;
 939
 940     _buttonlight_set_brightness(val);
 941 }
 942 #endif /* HAVE_BUTTONLIGHT_BRIGHTNESS */
 943
 944 #else /* !defined(HAVE_BACKLIGHT) || !defined(BACKLIGHT_FULL_INIT)
 945     -- no backlight, empty dummy functions */
 946
 947 #if defined(HAVE_BACKLIGHT) && !defined(BACKLIGHT_FULL_INIT)
 948 void backlight_init(void)
 949 {
 950     (void)_backlight_init();
 951     _backlight_on();
 952 }
 953 #endif
 954
 955 void backlight_on(void) {}
 956 void backlight_off(void) {}
 957 void buttonlight_on(void) {}
 958 void backlight_set_timeout(int value) {(void)value;}
 959
 960 bool is_backlight_on(bool ignore_always_off)
 961 {
 962     (void)ignore_always_off;
 963     return true;
 964 }
 965 #ifdef HAVE_REMOTE_LCD
 966 void remote_backlight_on(void) {}
 967 void remote_backlight_off(void) {}
 968 void remote_backlight_set_timeout(int value) {(void)value;}
 969
 970 bool is_remote_backlight_on(bool ignore_always_off)
 971 {
 972     (void)ignore_always_off;
 973     return true;
 974 }
 975 #endif /* HAVE_REMOTE_LCD */
 976 #ifdef HAVE_BACKLIGHT_BRIGHTNESS
 977 void backlight_set_brightness(int val) { (void)val; }
 978 #endif
 979 #ifdef HAVE_BUTTONLIGHT_BRIGHTNESS
 980 void buttonlight_set_brightness(int val) { (void)val; }
 981 #endif
 982 #endif /* defined(HAVE_BACKLIGHT) && defined(BACKLIGHT_FULL_INIT) */