firmware/target/arm/ipod/button-clickwheel.c

   1 /***************************************************************************
   2  *             __________               __   ___.
   3  *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
   4  *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
   5  *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
   6  *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
   7  *                     \/            \/     \/    \/            \/
   8  * $Id$
   9  *
  10  * Copyright (C) 2002 by Daniel Stenberg
  11  *
  12  * iPod driver based on code from the ipodlinux project - http://ipodlinux.org
  13  * Adapted for Rockbox in December 2005
  14  * Original file: linux/arch/armnommu/mach-ipod/keyboard.c
  15  * Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org)
  16  *
  17  *
  18  * This program is free software; you can redistribute it and/or
  19  * modify it under the terms of the GNU General Public License
  20  * as published by the Free Software Foundation; either version 2
  21  * of the License, or (at your option) any later version.
  22  *
  23  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  24  * KIND, either express or implied.
  25  *
  26  ****************************************************************************/
  27
  28 /*
  29  * Rockbox button functions
  30  */
  31
  32 #include <stdlib.h>
  33 #include "config.h"
  34 #include "cpu.h"
  35 #include "system.h"
  36 #include "button.h"
  37 #include "kernel.h"
  38 #include "backlight.h"
  39 #include "serial.h"
  40 #include "power.h"
  41 #include "powermgmt.h"
  42
  43 #define WHEEL_FAST_OFF_TIMEOUT   250000 /* timeout for acceleration = 250ms */
  44 #define WHEEL_REPEAT_TIMEOUT     250000 /* timeout for button repeat = 250ms */
  45 #define WHEEL_UNTOUCH_TIMEOUT    150000 /* timeout for untouching wheel = 150ms */
  46
  47 #ifdef CPU_PP
  48 #define CLICKWHEEL_DATA   (*(volatile unsigned long*)(0x7000c140))
  49 #elif CONFIG_CPU==S5L8701
  50 #define CLICKWHEEL00      (*(volatile unsigned long*)(0x3c200000))
  51 #define CLICKWHEEL10      (*(volatile unsigned long*)(0x3c200010))
  52 #define CLICKWHEELINT     (*(volatile unsigned long*)(0x3c200014))
  53 #define CLICKWHEEL_DATA   (*(volatile unsigned long*)(0x3c200018))
  54 #else
  55 #error CPU architecture not supported!
  56 #endif
  57
  58 #define WHEELCLICKS_PER_ROTATION     96 /* wheelclicks per full rotation */
  59
  60 /* This amount of clicks is needed for at least scrolling 1 item. Choose small values
  61  * to have high sensitivity but few precision, choose large values to have less
  62  * sensitivity and good precision. */
  63 #if defined(IPOD_NANO) || defined(IPOD_NANO2G)
  64 #define WHEEL_SENSITIVITY 6 /* iPod nano has smaller wheel, lower sensitivity needed */
  65 #else
  66 #define WHEEL_SENSITIVITY 4 /* default sensitivity */
  67 #endif
  68
  69 int  old_wheel_value  = -1;
  70 int  new_wheel_value  = 0;
  71 int  repeat           = 0;
  72 int  wheel_delta      = 0;
  73 bool wheel_is_touched = false;
  74 unsigned int  accumulated_wheel_delta = 0;
  75 unsigned int  wheel_repeat            = 0;
  76 unsigned int  wheel_velocity          = 0;
  77 unsigned long last_wheel_usec         = 0;
  78
  79 /* Variable to use for setting button status in interrupt handler */
  80 int int_btn = BUTTON_NONE;
  81 #ifdef HAVE_WHEEL_POSITION
  82     static int wheel_position = -1;
  83     static bool send_events = true;
  84 #endif
  85
  86 #ifdef CPU_PP
  87 static void opto_i2c_init(void)
  88 {
  89     DEV_EN |= DEV_OPTO;
  90     DEV_RS |= DEV_OPTO;
  91     udelay(5);
  92     DEV_RS &= ~DEV_OPTO; /* finish reset */
  93     DEV_INIT1 |= INIT_BUTTONS; /* enable buttons (needed for "hold"-detection) */
  94
  95     outl(0xc00a1f00, 0x7000c100);
  96     outl(0x01000000, 0x7000c104);
  97 }
  98 #endif
  99
 100 static inline int ipod_4g_button_read(void)
 101 {
 102     int whl = -1;
 103     int btn = BUTTON_NONE;
 104
 105 #ifdef CPU_PP
 106     if ((inl(0x7000c104) & 0x04000000) != 0)
 107     {
 108 #endif
 109         unsigned status = CLICKWHEEL_DATA;
 110
 111         if ((status & 0x800000ff) == 0x8000001a)
 112         {
 113             if (status & 0x00000100)
 114                 btn |= BUTTON_SELECT;
 115             if (status & 0x00000200)
 116                 btn |= BUTTON_RIGHT;
 117             if (status & 0x00000400)
 118                 btn |= BUTTON_LEFT;
 119             if (status & 0x00000800)
 120                 btn |= BUTTON_PLAY;
 121             if (status & 0x00001000)
 122                 btn |= BUTTON_MENU;
 123             if (status & 0x40000000)
 124             {
 125                 unsigned long usec = USEC_TIMER;
 126
 127                 /* Highest wheel = 0x5F, clockwise increases */
 128                 new_wheel_value = (status >> 16) & 0x7f;
 129                 whl = new_wheel_value;
 130
 131                 /* switch on backlight (again), reset power-off timer */
 132                 backlight_on();
 133                 reset_poweroff_timer();
 134
 135                 /* Check whether the scrollwheel was untouched by accident or by will. */
 136                 /* This is needed because wheel may be untoched very shortly during rotation */
 137                 if ( (!wheel_is_touched) && TIME_AFTER(usec, last_wheel_usec + WHEEL_UNTOUCH_TIMEOUT) )
 138                 {
 139                     /* wheel has been really untouched -> reset internal variables */
 140                     old_wheel_value         = -1;
 141                     wheel_velocity          = 0;
 142                     accumulated_wheel_delta = 0;
 143                     wheel_repeat            = BUTTON_NONE;
 144                 }
 145                 else
 146                 {
 147                     /* wheel was shortly untouched by accident -> leave internal variables */
 148                     wheel_is_touched = true;
 149                 }
 150
 151                 if (old_wheel_value >= 0)
 152                 {
 153                     /* This is for later = BUTTON_SCROLL_TOUCH;*/
 154                     wheel_delta = new_wheel_value - old_wheel_value;
 155                     unsigned int wheel_keycode = BUTTON_NONE;
 156
 157                     /* Taking into account wrapping during transition from highest
 158                      * to lowest wheel position and back */
 159                     if      (wheel_delta < -WHEELCLICKS_PER_ROTATION/2)
 160                         wheel_delta += WHEELCLICKS_PER_ROTATION; /* Forward wrapping case */
 161                     else if (wheel_delta >  WHEELCLICKS_PER_ROTATION/2)
 162                         wheel_delta -= WHEELCLICKS_PER_ROTATION; /* Backward wrapping case */
 163
 164                     /* Getting direction and wheel_keycode from wheel_delta.
 165                      * Need at least some clicks to be sure to avoid haptic fuzziness */
 166                     if      (wheel_delta >=  WHEEL_SENSITIVITY)
 167                         wheel_keycode = BUTTON_SCROLL_FWD;
 168                     else if (wheel_delta <= -WHEEL_SENSITIVITY)
 169                         wheel_keycode = BUTTON_SCROLL_BACK;
 170                     else
 171                         wheel_keycode = BUTTON_NONE;
 172
 173                     if (wheel_keycode != BUTTON_NONE)
 174                     {
 175                         long v = (usec - last_wheel_usec) & 0x7fffffff;
 176
 177                         /* undo signedness */
 178                         wheel_delta = (wheel_delta>0) ? wheel_delta : -wheel_delta;
 179
 180                         /* add the current wheel_delta */
 181                         accumulated_wheel_delta += wheel_delta;
 182
 183                         v = v ? (1000000 * wheel_delta) / v : 0;  /* clicks/sec = 1000000 * clicks/usec */
 184                         v = (v * 360) / WHEELCLICKS_PER_ROTATION; /* conversion to degree/sec */
 185                         v = (v<0) ? -v : v;                       /* undo signedness */
 186
 187                         /* some velocity filtering to smooth things out */
 188                         wheel_velocity = (15 * wheel_velocity + v) / 16;
 189                         /* limit to 24 bit */
 190                         wheel_velocity = (wheel_velocity>0xffffff) ? 0xffffff : wheel_velocity;
 191
 192                         /* assume REPEAT = off */
 193                         repeat = 0;
 194
 195                         /* direction reversals must nullify acceleration and accumulator */
 196                         if (wheel_keycode != wheel_repeat)
 197                         {
 198                             wheel_repeat            = wheel_keycode;
 199                             wheel_velocity          = 0;
 200                             accumulated_wheel_delta = 0;
 201                         }
 202                         /* on same direction REPEAT is assumed when new click is within timeout */
 203                         else if (TIME_BEFORE(usec, last_wheel_usec + WHEEL_REPEAT_TIMEOUT))
 204                         {
 205                             repeat = BUTTON_REPEAT;
 206                         }
 207                         /* timeout nullifies acceleration and accumulator */
 208                         if (TIME_AFTER(usec, last_wheel_usec + WHEEL_FAST_OFF_TIMEOUT))
 209                         {
 210                             wheel_velocity          = 0;
 211                             accumulated_wheel_delta = 0;
 212                         }
 213
 214 #ifdef HAVE_WHEEL_POSITION
 215                         if (send_events)
 216 #endif
 217                         /* The queue should have no other events when scrolling */
 218                         if (queue_empty(&button_queue))
 219                         {
 220                             /* each WHEEL_SENSITIVITY clicks = scrolling 1 item */
 221                             accumulated_wheel_delta /= WHEEL_SENSITIVITY;
 222 #ifdef HAVE_SCROLLWHEEL
 223                             /* use data-format for HAVE_SCROLLWHEEL */
 224                             /* always use acceleration mode (1<<31) */
 225                             /* always set message post count to (1<<24) for iPod */
 226                             /* this way the scrolling is always calculated from wheel_velocity */
 227                             queue_post(&button_queue, wheel_keycode | repeat,
 228                                        (1<<31) | (1 << 24) | wheel_velocity);
 229
 230 #else
 231                             queue_post(&button_queue, wheel_keycode | repeat,
 232                                        (accumulated_wheel_delta << 16) | new_wheel_value);
 233 #endif
 234                             accumulated_wheel_delta = 0;
 235                         }
 236                         last_wheel_usec = usec;
 237                         old_wheel_value = new_wheel_value;
 238                     }
 239                 }
 240                 else
 241                 {
 242                     /* scrollwheel was touched for the first time after finger lifting */
 243                     old_wheel_value = new_wheel_value;
 244                     wheel_is_touched = true;
 245                 }
 246             }
 247             else
 248             {
 249                 /* In this case the finger was lifted from the scrollwheel. */
 250                 wheel_is_touched = false;
 251             }
 252
 253         }
 254 #ifdef CPU_PP
 255     }
 256 #endif
 257
 258 #ifdef HAVE_WHEEL_POSITION
 259     /* Save the new absolute wheel position */
 260     wheel_position = whl;
 261 #endif
 262     return btn;
 263 }
 264
 265 #ifdef HAVE_WHEEL_POSITION
 266 int wheel_status(void)
 267 {
 268     return wheel_position;
 269 }
 270
 271 void wheel_send_events(bool send)
 272 {
 273     send_events = send;
 274 }
 275 #endif
 276
 277 #ifdef CPU_PP
 278 void ipod_4g_button_int(void)
 279 {
 280     CPU_HI_INT_DIS = I2C_MASK;
 281
 282     /* The following delay was 250 in the ipodlinux source, but 50 seems to
 283        work fine - tested on Nano, Color/Photo and Video. */
 284     udelay(50);
 285
 286     int_btn = ipod_4g_button_read();
 287
 288     outl(inl(0x7000c104) | 0x0c000000, 0x7000c104);
 289     outl(0x400a1f00, 0x7000c100);
 290
 291     CPU_HI_INT_EN = I2C_MASK;
 292 }
 293
 294 void button_init_device(void)
 295 {
 296     opto_i2c_init();
 297
 298     /* hold button - enable as input */
 299     GPIOA_ENABLE |= 0x20;
 300     GPIOA_OUTPUT_EN &= ~0x20;
 301
 302     /* unmask interrupt */
 303     CPU_INT_EN = HI_MASK;
 304     CPU_HI_INT_EN = I2C_MASK;
 305 }
 306
 307 bool button_hold(void)
 308 {
 309     return (GPIOA_INPUT_VAL & 0x20)?false:true;
 310 }
 311
 312 bool headphones_inserted(void)
 313 {
 314     return (GPIOA_INPUT_VAL & 0x80)?true:false;
 315 }
 316 #else
 317 void INT_SPI(void)
 318 {
 319     int clickwheel_events = CLICKWHEELINT;
 320
 321     /* Clear interrupts */
 322     if (clickwheel_events & 4) CLICKWHEELINT = 4;
 323     if (clickwheel_events & 2) CLICKWHEELINT = 2;
 324     if (clickwheel_events & 1) CLICKWHEELINT = 1;
 325
 326     int_btn = ipod_4g_button_read();
 327 }
 328
 329 void button_init_device(void)
 330 {
 331     CLICKWHEEL00 = 0x280000;
 332     CLICKWHEEL10 = 3;
 333     INTMOD = 0;
 334     INTMSK |= (1<<26);
 335     PCON10 &= ~0xF00;
 336 }
 337
 338 bool button_hold(void)
 339 {
 340     return ((PDAT14 & (1 << 6)) == 0);
 341 }
 342
 343 bool headphones_inserted(void)
 344 {
 345     return ((PDAT14 & (1 << 5)) != 0);
 346 }
 347 #endif
 348
 349 /*
 350  * Get button pressed from hardware
 351  */
 352 int button_read_device(void)
 353 {
 354     static bool hold_button = false;
 355     bool hold_button_old;
 356
 357     /* normal buttons */
 358     hold_button_old = hold_button;
 359     hold_button = button_hold();
 360
 361     if (hold_button != hold_button_old)
 362     {
 363         backlight_hold_changed(hold_button);
 364
 365         if (hold_button)
 366         {
 367 #ifdef CPU_PP
 368             /* lock -> disable wheel sensor */
 369             DEV_EN &= ~DEV_OPTO;
 370 #elif CONFIG_CPU==S5L8701
 371             CLICKWHEEL00 = 0;
 372             CLICKWHEEL10 = 0;
 373 #endif
 374         }
 375         else
 376         {
 377 #ifdef CPU_PP
 378             /* unlock -> enable wheel sensor */
 379             DEV_EN |= DEV_OPTO;
 380             opto_i2c_init();
 381 #elif CONFIG_CPU==S5L8701
 382             CLICKWHEEL00 = 0x280000;
 383             CLICKWHEEL10 = 3;
 384 #endif
 385         }
 386     }
 387
 388     /* The int_btn variable is set in the button interrupt handler */
 389 #ifdef IPOD_ACCESSORY_PROTOCOL
 390     return int_btn | remote_control_rx();
 391 #else
 392     return int_btn;
 393 #endif
 394 }