firmware/export/config-ipodvideo.h

   1 /*
   2  * This config file is for the Apple iPod Video
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 #define MODEL_NAME   "Apple iPod Video"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 5
  12
  13 /* define this if you use an ATA controller */
  14 #define HAVE_ATA
  15
  16 /* define this if you have recording possibility */
  17 #define HAVE_RECORDING
  18
  19 /* Define bitmask of input sources - recordable bitmask can be defined
  20    explicitly if different */
  21 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN)
  22
  23 /* define the bitmask of hardware sample rates */
  24 #define HW_SAMPR_CAPS   (SAMPR_CAP_44)
  25
  26 /* define the bitmask of recording sample rates */
  27 #define REC_SAMPR_CAPS  (SAMPR_CAP_44)
  28
  29 /* define this if you have a bitmap LCD display */
  30 #define HAVE_LCD_BITMAP
  31
  32 /* define this if you have a colour LCD */
  33 #define HAVE_LCD_COLOR
  34
  35 /* define this if you want album art for this target */
  36 #define HAVE_ALBUMART
  37
  38 /* define this if you have access to the quickscreen */
  39 #define HAVE_QUICKSCREEN
  40 /* define this if you have access to the pitchscreen */
  41 #define HAVE_PITCHSCREEN
  42
  43 /* define this if you would like tagcache to build on this target */
  44 #define HAVE_TAGCACHE
  45
  46 /* LCD dimensions */
  47 #define LCD_WIDTH  320
  48 #define LCD_HEIGHT 240
  49 #define LCD_DEPTH  16   /* 65536 colours */
  50 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  51
  52 #define CONFIG_KEYPAD IPOD_4G_PAD
  53
  54 /* Define this if you do software codec */
  55 #define CONFIG_CODEC SWCODEC
  56
  57 /* define this if you have a real-time clock */
  58 #define CONFIG_RTC RTC_PCF50605
  59
  60 /* Define if the device can wake from an RTC alarm */
  61 #define HAVE_RTC_ALARM
  62
  63 /* Define this if you can switch on/off the accessory power supply */
  64 #define HAVE_ACCESSORY_SUPPLY
  65
  66 /* Define this if you have a software controlled poweroff */
  67 #define HAVE_SW_POWEROFF
  68
  69 /* The number of bytes reserved for loadable codecs */
  70 #define CODEC_SIZE 0x80000
  71
  72 /* The number of bytes reserved for loadable plugins */
  73 #define PLUGIN_BUFFER_SIZE 0x80000
  74
  75 /* Define this if you have the WM8758 audio codec */
  76 #define HAVE_WM8758
  77
  78 #define AB_REPEAT_ENABLE 1
  79 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
  80
  81 /* define this if you have a disk storage, i.e. something
  82    that needs spinups and can cause skips when shaked */
  83 #define HAVE_DISK_STORAGE
  84
  85 /* Define this for LCD backlight available */
  86 #define HAVE_BACKLIGHT
  87 #define HAVE_BACKLIGHT_BRIGHTNESS
  88
  89 /* Main LCD backlight brightness range and defaults */
  90 #define MIN_BRIGHTNESS_SETTING      1
  91 #define MAX_BRIGHTNESS_SETTING      32
  92 #define DEFAULT_BRIGHTNESS_SETTING  16
  93
  94 /* We can fade the backlight by using PWM */
  95 #define HAVE_BACKLIGHT_PWM_FADING
  96
  97 /* define this if the unit uses a scrollwheel for navigation */
  98 #define HAVE_SCROLLWHEEL
  99 /* define from which rotation speed [degree/sec] on the acceleration starts */
 100 #define WHEEL_ACCEL_START 270
 101 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 102 #define WHEEL_ACCELERATION 3
 103
 104 /* Define this if you can detect headphones */
 105 #define HAVE_HEADPHONE_DETECTION
 106
 107 /* Type of mobile power */
 108 #if (MEM==32)  /* this is the 30GB-model */
 109 # define BATTERY_CAPACITY_DEFAULT 400 /* default battery capacity for the 30GB model */
 110 # define BATTERY_CAPACITY_MIN     300 /* min. capacity selectable */
 111 # define BATTERY_CAPACITY_MAX     800 /* max. capacity selectable */
 112 #else          /* these are the 60/80GB-models */
 113 # define BATTERY_CAPACITY_DEFAULT 600 /* default battery capacity for the 60/80GB model */
 114 # define BATTERY_CAPACITY_MIN     500 /* min. capacity selectable */
 115 # define BATTERY_CAPACITY_MAX    1000 /* max. capacity selectable */
 116 #endif
 117 #define BATTERY_CAPACITY_INC       50 /* capacity increment */
 118 #define BATTERY_TYPES_COUNT         1 /* only one type */
 119
 120 /* Hardware controlled charging with monitoring */
 121 #define CONFIG_CHARGING CHARGING_MONITOR
 122
 123 /* define this if the unit can be powered or charged via USB */
 124 #define HAVE_USB_POWER
 125
 126 #ifndef SIMULATOR
 127
 128 /* Define this if you have a PortalPlayer PP5022 */
 129 #define CONFIG_CPU PP5022
 130
 131 /* Define this if you want to use the PP5020 i2c interface */
 132 #define CONFIG_I2C I2C_PP5020
 133
 134 /* We're able to shut off power to the HDD */
 135 #define HAVE_ATA_POWER_OFF
 136
 137 /* define this if the hardware can be powered off while charging */
 138 //#define HAVE_POWEROFF_WHILE_CHARGING
 139
 140 /* The start address index for ROM builds */
 141 #define ROM_START 0x00000000
 142
 143 /* The size of the flash ROM */
 144 #define FLASH_SIZE 0x100000
 145
 146 /* Define this to the CPU frequency */
 147 #define CPU_FREQ      11289600
 148
 149 #define CONFIG_LCD LCD_IPODVIDEO
 150
 151 /* Offset ( in the firmware file's header ) to the file length */
 152 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 153
 154 /* Offset ( in the firmware file's header ) to the file CRC */
 155 #define FIRMWARE_OFFSET_FILE_CRC 0
 156
 157 /* Offset ( in the firmware file's header ) to the real data */
 158 #define FIRMWARE_OFFSET_FILE_DATA 8
 159
 160 #define USB_IPODSTYLE
 161
 162 /* USB On-the-go */
 163 #define CONFIG_USBOTG USBOTG_ARC
 164
 165 /* enable these for the experimental usb stack */
 166 #define HAVE_USBSTACK
 167 #define USB_VENDOR_ID 0x05ac
 168 #define USB_PRODUCT_ID 0x1209
 169
 170 /* Virtual LED (icon) */
 171 #define CONFIG_LED LED_VIRTUAL
 172
 173 /* Define this if you have adjustable CPU frequency */
 174 #define HAVE_ADJUSTABLE_CPU_FREQ
 175
 176 /* Define this if you can read an absolute wheel position */
 177 #define HAVE_WHEEL_POSITION
 178
 179 /* define this if the device has larger sectors when accessed via USB */
 180 /* (only relevant in disk.c, fat.c now always supports large virtual sectors) */
 181 #define MAX_LOG_SECTOR_SIZE 2048
 182
 183 /* define this if the hard drive uses large physical sectors (ATA-7 feature) */
 184 /* and doesn't handle them in the drive firmware */
 185 #define MAX_PHYS_SECTOR_SIZE 1024
 186
 187 #define BOOTFILE_EXT "ipod"
 188 #define BOOTFILE "rockbox." BOOTFILE_EXT
 189 #define BOOTDIR "/.rockbox"
 190
 191 #define ICODE_ATTR_TREMOR_NOT_MDCT
 192
 193 #endif