firmware/export/config-h100.h

   1 #if defined(MEM) && (MEM > 16)
   2 #error "re-run configure this just so wrong"
   3 #endif
   4
   5 #define TARGET_TREE /* this target is using the target tree system */
   6
   7 /*
   8  * This config file is for iriver iHP-100, iHP-110, iHP-115
   9  */
  10 #define IRIVER_H100_SERIES 1
  11
  12 #define MODEL_NAME "iriver iHP-100 series"
  13
  14 /* For Rolo and boot loader */
  15 #define MODEL_NUMBER 1
  16
  17 /* define this if you use an ATA controller */
  18 #define HAVE_ATA
  19
  20 /* define this if you have a bitmap LCD display */
  21 #define HAVE_LCD_BITMAP
  22
  23 /* define this if you want album art for this target */
  24 #define HAVE_ALBUMART
  25
  26 /* define this if you can flip your LCD */
  27 #define HAVE_LCD_FLIP
  28
  29 /* define this if you can invert the colours on your LCD */
  30 #define HAVE_LCD_INVERT
  31
  32 /* define this if you have access to the quickscreen */
  33 #define HAVE_QUICKSCREEN
  34 /* define this if you have access to the pitchscreen */
  35 #define HAVE_PITCHSCREEN
  36
  37 /* define this if you would like tagcache to build on this target */
  38 #define HAVE_TAGCACHE
  39
  40 /* LCD dimensions */
  41 #define LCD_WIDTH  160
  42 #define LCD_HEIGHT 128
  43 #define LCD_DEPTH  2
  44
  45 #define LCD_PIXELFORMAT VERTICAL_PACKING
  46
  47 /* remote LCD */
  48 #define LCD_REMOTE_WIDTH  128
  49 #define LCD_REMOTE_HEIGHT 64
  50 #define LCD_REMOTE_DEPTH  1
  51
  52 #define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
  53
  54 #define CONFIG_KEYPAD IRIVER_H100_PAD
  55
  56 #define CONFIG_REMOTE_KEYPAD H100_REMOTE
  57
  58 /* Define this if you do software codec */
  59 #define CONFIG_CODEC SWCODEC
  60
  61 /* Define this if you have an remote lcd */
  62 #define HAVE_REMOTE_LCD
  63
  64 /* Define if we have a hardware defect that causes ticking on the audio line */
  65 #define HAVE_REMOTE_LCD_TICKING
  66
  67 #define CONFIG_LCD LCD_S1D15E06
  68
  69 /* define this if you have a disk storage, i.e. something
  70    that needs spinups and can cause skips when shaked */
  71 #define HAVE_DISK_STORAGE
  72
  73 /* Define this for LCD backlight available */
  74 #define HAVE_BACKLIGHT
  75
  76 /* We can fade the backlight by using PWM */
  77 #define HAVE_BACKLIGHT_PWM_FADING
  78
  79 /* Define this if you have a software controlled poweroff */
  80 #define HAVE_SW_POWEROFF
  81
  82 /* The number of bytes reserved for loadable codecs */
  83 #define CODEC_SIZE 0x80000
  84
  85 /* The number of bytes reserved for loadable plugins */
  86 #define PLUGIN_BUFFER_SIZE 0x80000
  87
  88 #define AB_REPEAT_ENABLE 1
  89
  90 #define CONFIG_TUNER TEA5767
  91 #define CONFIG_TUNER_XTAL 32768
  92
  93 #define HAVE_UDA1380
  94
  95 /* define this if you have recording possibility */
  96 #define HAVE_RECORDING
  97
  98 /* define hardware samples rate caps mask */
  99 #define HW_SAMPR_CAPS   (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
 100
 101 /* define the bitmask of recording sample rates */
 102 #define REC_SAMPR_CAPS  (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
 103
 104 #define HAVE_AGC
 105
 106 #define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
 107 #define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
 108 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
 109 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 110 #define BATTERY_TYPES_COUNT  1    /* only one type */
 111
 112 /* Hardware controlled charging */
 113 //#define CONFIG_CHARGING CHARGING_SIMPLE
 114 #define CONFIG_CHARGING CHARGING_MONITOR /* FIXME: remove that once monitoring is fixed properly */
 115
 116 #ifndef SIMULATOR
 117
 118 /* Define this if you have a Motorola SCF5249 */
 119 #define CONFIG_CPU MCF5249
 120
 121 /* Define this if you want to use coldfire's i2c interface */
 122 #define CONFIG_I2C I2C_COLDFIRE
 123
 124 /* Define this if you can run rockbox from flash memory */
 125 /* In theory we can, but somebody needs to verify there are no issues. */
 126 #define HAVE_FLASHED_ROCKBOX
 127
 128 /* define this if the hardware can be powered off while charging */
 129 #define HAVE_POWEROFF_WHILE_CHARGING
 130
 131 /* The size of the flash ROM */
 132 #define FLASH_SIZE 0x200000
 133
 134 /* Define this to the CPU frequency */
 135 #define CPU_FREQ      11289600
 136
 137 /* Define this if you have ATA power-off control */
 138 #define HAVE_ATA_POWER_OFF
 139
 140 /* Offset ( in the firmware file's header ) to the file CRC */
 141 #define FIRMWARE_OFFSET_FILE_CRC 0
 142
 143 /* Offset ( in the firmware file's header ) to the real data */
 144 #define FIRMWARE_OFFSET_FILE_DATA 8
 145
 146 #define HAVE_ATA_LED_CTRL
 147
 148 /* Define this if you have adjustable CPU frequency */
 149 #define HAVE_ADJUSTABLE_CPU_FREQ
 150
 151 #define BOOTFILE_EXT "iriver"
 152 #define BOOTFILE "rockbox." BOOTFILE_EXT
 153 #define BOOTDIR "/.rockbox"
 154
 155 #define BOOTLOADER_ENTRYPOINT  0x001F0000
 156 #define FLASH_RAMIMAGE_ENTRY   0x00001000
 157 #define FLASH_ROMIMAGE_ENTRY   0x00100000
 158 #define FLASH_MAGIC            0xfbfbfbf2
 159
 160 /* Define this if there is an EEPROM chip */
 161 #define HAVE_EEPROM
 162
 163 /* Define this if the EEPROM chip is used */
 164 #define HAVE_EEPROM_SETTINGS
 165
 166 #endif /* !SIMULATOR */
 167
 168 /* Define bitmask of input sources - recordable bitmask can be defined
 169    explicitly if different */
 170 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | \
 171                         SRC_CAP_FMRADIO | SRC_CAP_SPDIF)
 172
 173 /* Define this for S/PDIF output available */
 174 #define HAVE_SPDIF_OUT
 175
 176 /* Define this if you can control the S/PDIF power */
 177 #define HAVE_SPDIF_POWER
 178 #define SPDIF_POWER_INVERTED
 179
 180 /* Define this for FM radio input available */
 181 #define HAVE_FMRADIO_IN
 182
 183 /** Port-specific settings **/
 184
 185 #define HAVE_LCD_CONTRAST
 186
 187 /* Main LCD backlight brightness range and defaults */
 188 #define MIN_CONTRAST_SETTING        14 /* White screen a bit higher than this */
 189 #define MAX_CONTRAST_SETTING        63 /* Black screen a bit lower than this */
 190 #define DEFAULT_CONTRAST_SETTING    27
 191
 192 /* Remote LCD contrast range and defaults */
 193 #define MIN_REMOTE_CONTRAST_SETTING     5
 194 #define MAX_REMOTE_CONTRAST_SETTING     63
 195 #define DEFAULT_REMOTE_CONTRAST_SETTING 42