1 /***************************************************************************
3 * Open \______ \ ____ ____ | | _\_ |__ _______ ___
4 * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5 * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6 * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
8 * $Id: S5L8700X.h 2008-03-27 Marcoen Hirschberg, Bart van Adrichem $
10 * Copyright (C) 2008 by Marcoen Hirschberg, Bart van Adrichem
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version 2
15 * of the License, or (at your option) any later version.
17 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18 * KIND, either express or implied.
20 ****************************************************************************/
22 #define REG8_PTR_T volatile uint8_t *
23 #define REG16_PTR_T volatile uint16_t *
24 #define REG32_PTR_T volatile uint32_t *
28 /* Following registers are mapped on IO Area in data memory area of Calm. */
29 #define CONFIG0 (*(REG16_PTR_T)(0x3F000000)) /* configuration/control register 0 */
30 #define CONFIG1 (*(REG16_PTR_T)(0x3F000002)) /* configuration/control register 1*/
31 #define COMMUN (*(REG16_PTR_T)(0x3F000004)) /* Communication Control Register */
32 #define DDATA0 (*(REG16_PTR_T)(0x3F000006)) /* Communication data from host to ADM */
33 #define DDATA1 (*(REG16_PTR_T)(0x3F000008)) /* Communication data from host to ADM */
34 #define DDATA2 (*(REG16_PTR_T)(0x3F00000A)) /* Communication data from host to ADM */
35 #define DDATA3 (*(REG16_PTR_T)(0x3F00000C)) /* Communication data from host to ADM */
36 #define DDATA4 (*(REG16_PTR_T)(0x3F00000E)) /* Communication data from host to ADM */
37 #define DDATA5 (*(REG16_PTR_T)(0x3F000010)) /* Communication data from host to ADM */
38 #define DDATA6 (*(REG16_PTR_T)(0x3F000012)) /* Communication data from host to ADM */
39 #define DDATA7 (*(REG16_PTR_T)(0x3F000014)) /* Communication data from host to ADM */
40 #define UDATA0 (*(REG16_PTR_T)(0x3F000016)) /* Communication data from ADM to host */
41 #define UDATA1 (*(REG16_PTR_T)(0x3F000018)) /* Communication data from ADM to host */
42 #define UDATA2 (*(REG16_PTR_T)(0x3F00001A)) /* Communication data from ADM to host */
43 #define UDATA3 (*(REG16_PTR_T)(0x3F00001C)) /* Communication data from ADM to host */
44 #define UDATA4 (*(REG16_PTR_T)(0x3F00001E)) /* Communication data from ADM to host */
45 #define UDATA5 (*(REG16_PTR_T)(0x3F000020)) /* Communication data from ADM to host */
46 #define UDATA6 (*(REG16_PTR_T)(0x3F000022)) /* Communication data from ADM to host */
47 #define UDATA7 (*(REG16_PTR_T)(0x3F000024)) /* Communication data from ADM to host */
48 #define IBASE_H (*(REG16_PTR_T)(0x3F000026)) /* Higher half of start address for ADM instruction area */
49 #define IBASE_L (*(REG16_PTR_T)(0x3F000028)) /* Lower half of start address for ADM instruction area */
50 #define DBASE_H (*(REG16_PTR_T)(0x3F00002A)) /* Higher half of start address for CalmRISC data area */
51 #define DBASE_L (*(REG16_PTR_T)(0x3F00002C)) /* Lower half of start address for CalmRISC data area */
52 #define XBASE_H (*(REG16_PTR_T)(0x3F00002E)) /* Higher half of start address for Mac X area */
53 #define XBASE_L (*(REG16_PTR_T)(0x3F000030)) /* Lower half of start address for Mac X area */
54 #define YBASE_H (*(REG16_PTR_T)(0x3F000032)) /* Higher half of start address for Mac Y area */
55 #define YBASE_L (*(REG16_PTR_T)(0x3F000034)) /* Lower half of start address for Mac Y area */
56 #define S0BASE_H (*(REG16_PTR_T)(0x3F000036)) /* Higher half of start address for sequential buffer 0 area */
57 #define S0BASE_L (*(REG16_PTR_T)(0x3F000038)) /* Lower half of start address for sequential buffer 0 area */
58 #define S1BASE_H (*(REG16_PTR_T)(0x3F00003A)) /* Higher half of start address for sequential buffer 1 area */
59 #define S1BASE_L (*(REG16_PTR_T)(0x3F00003C)) /* Lower half of start address for sequential buffer 1 area */
60 #define CACHECON (*(REG16_PTR_T)(0x3F00003E)) /* Cache Control Register */
61 #define CACHESTAT (*(REG16_PTR_T)(0x3F000040)) /* Cache status register */
62 #define SBFCON (*(REG16_PTR_T)(0x3F000042)) /* Sequential Buffer Control Register */
63 #define SBFSTAT (*(REG16_PTR_T)(0x3F000044)) /* Sequential Buffer Status Register */
64 #define SBL0OFF_H (*(REG16_PTR_T)(0x3F000046)) /* Higher bits of Offset register of sequential block 0 area */
65 #define SBL0OFF_L (*(REG16_PTR_T)(0x3F000048)) /* Lower bits of Offset register of sequential block 0 area */
66 #define SBL1OFF_H (*(REG16_PTR_T)(0x3F00004A)) /* Higher bits of Offset register of sequential block 1 area */
67 #define SBL1OFF_L (*(REG16_PTR_T)(0x3F00004C)) /* Lower bits of Offset register of sequential block 1 area */
68 #define SBL0BEGIN_H (*(REG16_PTR_T)(0x3F00004E)) /* Higher bits of Begin Offset of sequential block 0 area in ring mode */
69 #define SBL0BEGIN_L (*(REG16_PTR_T)(0x3F000050)) /* Lower bits of Begin Offset of sequential block 0 area in ring mode */
70 #define SBL1BEGIN_H (*(REG16_PTR_T)(0x3F000052)) /* Higher bits of Begin Offset of sequential block 1 area in ring mode */
71 #define SBL1BEGIN_L (*(REG16_PTR_T)(0x3F000054)) /* Lower bits of Begin Offset of sequential block 1 area in ring mode */
72 #define SBL0END_H (*(REG16_PTR_T)(0x3F000056)) /* Lower bits of End Offset of sequential block 0 area in ring mode */
73 #define SBL0END_L (*(REG16_PTR_T)(0x3F000058)) /* Higher bits of End Offset of sequential block 0 area in ring mode */
74 #define SBL1END_H (*(REG16_PTR_T)(0x3F00005A)) /* Lower bits of End Offset of sequential block 1 area in ring mode */
75 #define SBL1END_L (*(REG16_PTR_T)(0x3F00005C)) /* Higher bits of End Offset of sequential block 1 area in ring mode */
77 /* Following registers are components of SFRS of the target system */
78 #define ADM_CONFIG (*(REG32_PTR_T)(0x39000000)) /* Configuration/Control Register */
79 #define ADM_COMMUN (*(REG32_PTR_T)(0x39000004)) /* Communication Control Register */
80 #define ADM_DDATA0 (*(REG32_PTR_T)(0x39000010)) /* Communication data from host to ADM */
81 #define ADM_DDATA1 (*(REG32_PTR_T)(0x39000014)) /* Communication data from host to ADM */
82 #define ADM_DDATA2 (*(REG32_PTR_T)(0x39000018)) /* Communication data from host to ADM */
83 #define ADM_DDATA3 (*(REG32_PTR_T)(0x3900001C)) /* Communication data from host to ADM */
84 #define ADM_DDATA4 (*(REG32_PTR_T)(0x39000020)) /* Communication data from host to ADM */
85 #define ADM_DDATA5 (*(REG32_PTR_T)(0x39000024)) /* Communication data from host to ADM */
86 #define ADM_DDATA6 (*(REG32_PTR_T)(0x39000028)) /* Communication data from host to ADM */
87 #define ADM_DDATA7 (*(REG32_PTR_T)(0x3900002C)) /* Communication data from host to ADM */
88 #define ADM_UDATA0 (*(REG32_PTR_T)(0x39000030)) /* Communication data from ADM to host */
89 #define ADM_UDATA1 (*(REG32_PTR_T)(0x39000034)) /* Communication data from ADM to host */
90 #define ADM_UDATA2 (*(REG32_PTR_T)(0x39000038)) /* Communication data from ADM to host */
91 #define ADM_UDATA3 (*(REG32_PTR_T)(0x3900003C)) /* Communication data from ADM to host */
92 #define ADM_UDATA4 (*(REG32_PTR_T)(0x39000040)) /* Communication data from ADM to host */
93 #define ADM_UDATA5 (*(REG32_PTR_T)(0x39000044)) /* Communication data from ADM to host */
94 #define ADM_UDATA6 (*(REG32_PTR_T)(0x39000048)) /* Communication data from ADM to host */
95 #define ADM_UDATA7 (*(REG32_PTR_T)(0x3900004C)) /* Communication data from ADM to host */
96 #define ADM_IBASE (*(REG32_PTR_T)(0x39000050)) /* Start Address for ADM Instruction Area */
97 #define ADM_DBASE (*(REG32_PTR_T)(0x39000054)) /* Start Address for CalmRISC Data Area */
98 #define ADM_XBASE (*(REG32_PTR_T)(0x39000058)) /* Start Address for Mac X Area */
99 #define ADM_YBASE (*(REG32_PTR_T)(0x3900005C)) /* Start Address for Mac Y Area */
100 #define ADM_S0BASE (*(REG32_PTR_T)(0x39000060)) /* Start Address for Sequential Block 0 Area */
101 #define ADM_S1BASE (*(REG32_PTR_T)(0x39000064)) /* Start Address for Sequential Block 1 Area */
103 /* 05. CLOCK & POWER MANAGEMENT */
104 #define CLKCON (*(REG32_PTR_T)(0x3C500000)) /* Clock control Register */
105 #define PLL0PMS (*(REG32_PTR_T)(0x3C500004)) /* PLL PMS value Register */
106 #define PLL1PMS (*(REG32_PTR_T)(0x3C500008)) /* PLL PMS value Register */
107 #define PLL0LCNT (*(REG32_PTR_T)(0x3C500014)) /* PLL0 lock count register */
108 #define PLL1LCNT (*(REG32_PTR_T)(0x3C500018)) /* PLL1 lock count register */
109 #define PLLLOCK (*(REG32_PTR_T)(0x3C500020)) /* PLL lock status register */
110 #define PLLCON (*(REG32_PTR_T)(0x3C500024)) /* PLL control register */
111 #define PWRCON (*(REG32_PTR_T)(0x3C500028)) /* Clock power control register */
112 #define PWRMODE (*(REG32_PTR_T)(0x3C50002C)) /* Power mode control register */
113 #define SWRCON (*(REG32_PTR_T)(0x3C500030)) /* Software reset control register */
114 #define RSTSR (*(REG32_PTR_T)(0x3C500034)) /* Reset status register */
115 #define DSPCLKMD (*(REG32_PTR_T)(0x3C500038)) /* DSP clock mode register */
116 #define CLKCON2 (*(REG32_PTR_T)(0x3C50003C)) /* clock control register 2 */
118 /* 06. INTERRUPT CONTROLLER UNIT */
119 #define SRCPND (*(REG32_PTR_T)(0x39C00000)) /* Indicates the interrupt request status. */
120 #define INTMOD (*(REG32_PTR_T)(0x39C00004)) /* Interrupt mode register. */
121 #define INTMSK (*(REG32_PTR_T)(0x39C00008)) /* Determines which interrupt source is masked. The */
122 #define PRIORITY (*(REG32_PTR_T)(0x39C0000C)) /* IRQ priority control register */
123 #define INTPND (*(REG32_PTR_T)(0x39C00010)) /* Indicates the interrupt request status. */
124 #define INTOFFSET (*(REG32_PTR_T)(0x39C00014)) /* Indicates the IRQ interrupt request source */
125 #define EINTPOL (*(REG32_PTR_T)(0x39C00018)) /* Indicates external interrupt polarity */
126 #define EINTPEND (*(REG32_PTR_T)(0x39C0001C)) /* Indicates whether external interrupts are pending. */
127 #define EINTMSK (*(REG32_PTR_T)(0x39C00020)) /* Indicates whether external interrupts are masked */
129 /* 07. MEMORY INTERFACE UNIT (MIU) */
132 #define MIUCON (*(REG32_PTR_T)(0x38200000)) /* External Memory configuration register */
133 #define MIUCOM (*(REG32_PTR_T)(0x38200004)) /* Command and status register */
134 #define MIUAREF (*(REG32_PTR_T)(0x38200008)) /* Auto-refresh control register */
135 #define MIUMRS (*(REG32_PTR_T)(0x3820000C)) /* SDRAM Mode Register Set Value Register */
136 #define MIUSDPARA (*(REG32_PTR_T)(0x38200010)) /* SDRAM parameter register */
139 #define MEMCONF (*(REG32_PTR_T)(0x38200020)) /* External Memory configuration register */
140 #define USRCMD (*(REG32_PTR_T)(0x38200024)) /* Command and Status register */
141 #define AREF (*(REG32_PTR_T)(0x38200028)) /* Auto-refresh control register */
142 #define MRS (*(REG32_PTR_T)(0x3820002C)) /* DRAM mode register set value register */
143 #define DPARAM (*(REG32_PTR_T)(0x38200030)) /* DRAM parameter register (Unit of ‘tXXX’ : tCK */
144 #define SMEMCONF (*(REG32_PTR_T)(0x38200034)) /* Static memory mode register set value register */
145 #define MIUS01PARA (*(REG32_PTR_T)(0x38200038)) /* SRAM0, SRAM1 static memory parameter register (In S5L8700, SRAM0 is Nor Flash) */
146 #define MIUS23PARA (*(REG32_PTR_T)(0x3820003C)) /* SRAM2 and SRAM3 static memory parameter register */
148 #define MIUORG (*(REG32_PTR_T)(0x38200040)) /* SDR/DDR selection */
149 #define MIUDLYDQS (*(REG32_PTR_T)(0x38200044)) /* DQS/DQS-rst delay parameter */
150 #define MIUDLYCLK (*(REG32_PTR_T)(0x38200048)) /* SDR/DDR Clock delay parameter */
151 #define MIU_DSS_SEL_B (*(REG32_PTR_T)(0x3820004C)) /* SSTL2 Drive Strength parameter for Bi-direction signal */
152 #define MIU_DSS_SEL_O (*(REG32_PTR_T)(0x38200050)) /* SSTL2 Drive Strength parameter for Output signal */
153 #define MIU_DSS_SEL_C (*(REG32_PTR_T)(0x38200054)) /* SSTL2 Drive Strength parameter for Clock signal */
154 #define PAD_DSS_SEL_NOR (*(REG32_PTR_T)(0x38200058)) /* Wide range I/O Drive Strength parameter for NOR interface */
155 #define PAD_DSS_SEL_ATA (*(REG32_PTR_T)(0x3820005C)) /* Wide range I/O Drive Strength parameter for ATA interface */
156 #define SSTL2_PAD_ON (*(REG32_PTR_T)(0x38200060)) /* SSTL2 pad ON/OFF select */
158 /* 08. IODMA CONTROLLER */
159 #define DMABASE0 (*(REG32_PTR_T)(0x38400000)) /* Base address register for channel 0 */
160 #define DMACON0 (*(REG32_PTR_T)(0x38400004)) /* Configuration register for channel 0 */
161 #define DMATCNT0 (*(REG32_PTR_T)(0x38400008)) /* Transfer count register for channel 0 */
162 #define DMACADDR0 (*(REG32_PTR_T)(0x3840000C)) /* Current memory address register for channel 0 */
163 #define DMACTCNT0 (*(REG32_PTR_T)(0x38400010)) /* Current transfer count register for channel 0 */
164 #define DMACOM0 (*(REG32_PTR_T)(0x38400014)) /* Channel 0 command register */
165 #define DMANOFF0 (*(REG32_PTR_T)(0x38400018)) /* Channel 0 offset2 register */
166 #define DMABASE1 (*(REG32_PTR_T)(0x38400020)) /* Base address register for channel 1 */
167 #define DMACON1 (*(REG32_PTR_T)(0x38400024)) /* Configuration register for channel 1 */
168 #define DMATCNT1 (*(REG32_PTR_T)(0x38400028)) /* Transfer count register for channel 1 */
169 #define DMACADDR1 (*(REG32_PTR_T)(0x3840002C)) /* Current memory address register for channel 1 */
170 #define DMACTCNT1 (*(REG32_PTR_T)(0x38400030)) /* Current transfer count register for channel 1 */
171 #define DMACOM1 (*(REG32_PTR_T)(0x38400034)) /* Channel 1 command register */
172 #define DMABASE2 (*(REG32_PTR_T)(0x38400040)) /* Base address register for channel 2 */
173 #define DMACON2 (*(REG32_PTR_T)(0x38400044)) /* Configuration register for channel 2 */
174 #define DMATCNT2 (*(REG32_PTR_T)(0x38400048)) /* Transfer count register for channel 2 */
175 #define DMACADDR2 (*(REG32_PTR_T)(0x3840004C)) /* Current memory address register for channel 2 */
176 #define DMACTCNT2 (*(REG32_PTR_T)(0x38400050)) /* Current transfer count register for channel 2 */
177 #define DMACOM2 (*(REG32_PTR_T)(0x38400054)) /* Channel 2 command register */
178 #define DMABASE3 (*(REG32_PTR_T)(0x38400060)) /* Base address register for channel 3 */
179 #define DMACON3 (*(REG32_PTR_T)(0x38400064)) /* Configuration register for channel 3 */
180 #define DMATCNT3 (*(REG32_PTR_T)(0x38400068)) /* Transfer count register for channel 3 */
181 #define DMACADDR3 (*(REG32_PTR_T)(0x3840006C)) /* Current memory address register for channel 3 */
182 #define DMACTCNT3 (*(REG32_PTR_T)(0x38400070)) /* Current transfer count register for channel 3 */
183 #define DMACOM3 (*(REG32_PTR_T)(0x38400074)) /* Channel 3 command register */
184 #define DMAALLST (*(REG32_PTR_T)(0x38400100)) /* All channel status register */
186 /* 10. REAL TIMER CLOCK (RTC) */
187 #define RTCCON (*(REG32_PTR_T)(0x3D200000)) /* RTC Control Register */
188 #define RTCRST (*(REG32_PTR_T)(0x3D200004)) /* RTC Round Reset Register */
189 #define RTCALM (*(REG32_PTR_T)(0x3D200008)) /* RTC Alarm Control Register */
190 #define ALMSEC (*(REG32_PTR_T)(0x3D20000C)) /* Alarm Second Data Register */
191 #define ALMMIN (*(REG32_PTR_T)(0x3D200010)) /* Alarm Minute Data Register */
192 #define ALMHOUR (*(REG32_PTR_T)(0x3D200014)) /* Alarm Hour Data Register */
193 #define ALMDATE (*(REG32_PTR_T)(0x3D200018)) /* Alarm Date Data Register */
194 #define ALMDAY (*(REG32_PTR_T)(0x3D20001C)) /* Alarm Day of Week Data Register */
195 #define ALMMON (*(REG32_PTR_T)(0x3D200020)) /* Alarm Month Data Register */
196 #define ALMYEAR (*(REG32_PTR_T)(0x3D200024)) /* Alarm Year Data Register */
197 #define BCDSEC (*(REG32_PTR_T)(0x3D200028)) /* BCD Second Register */
198 #define BCDMIN (*(REG32_PTR_T)(0x3D20002C)) /* BCD Minute Register */
199 #define BCDHOUR (*(REG32_PTR_T)(0x3D200030)) /* BCD Hour Register */
200 #define BCDDATE (*(REG32_PTR_T)(0x3D200034)) /* BCD Date Register */
201 #define BCDDAY (*(REG32_PTR_T)(0x3D200038)) /* BCD Day of Week Register */
202 #define BCDMON (*(REG32_PTR_T)(0x3D20003C)) /* BCD Month Register */
203 #define BCDYEAR (*(REG32_PTR_T)(0x3D200040)) /* BCD Year Register */
204 #define RTCIM (*(REG32_PTR_T)(0x3D200044)) /* RTC Interrupt Mode Register */
205 #define RTCPEND (*(REG32_PTR_T)(0x3D200048)) /* RTC Interrupt Pending Register */
207 /* 09. WATCHDOG TIMER*/
208 #define WDTCON (*(REG32_PTR_T)(0x3C800000)) /* Control Register */
209 #define WDTCNT (*(REG32_PTR_T)(0x3C800004)) /* 11-bits internal counter */
211 /* 11. 16 BIT TIMER */
212 #define TACON (*(REG32_PTR_T)(0x3C700000)) /* Control Register for timer A */
213 #define TACMD (*(REG32_PTR_T)(0x3C700004)) /* Command Register for timer A */
214 #define TADATA0 (*(REG32_PTR_T)(0x3C700008)) /* Data0 Register */
215 #define TADATA1 (*(REG32_PTR_T)(0x3C70000C)) /* Data1 Register */
216 #define TAPRE (*(REG32_PTR_T)(0x3C700010)) /* Pre-scale register */
217 #define TACNT (*(REG32_PTR_T)(0x3C700014)) /* Counter register */
218 #define TBCON (*(REG32_PTR_T)(0x3C700020)) /* Control Register for timer B */
219 #define TBCMD (*(REG32_PTR_T)(0x3C700024)) /* Command Register for timer B */
220 #define TBDATA0 (*(REG32_PTR_T)(0x3C700028)) /* Data0 Register */
221 #define TBDATA1 (*(REG32_PTR_T)(0x3C70002C)) /* Data1 Register */
222 #define TBPRE (*(REG32_PTR_T)(0x3C700030)) /* Pre-scale register */
223 #define TBCNT (*(REG32_PTR_T)(0x3C700034)) /* Counter register */
224 #define TCCON (*(REG32_PTR_T)(0x3C700040)) /* Control Register for timer C */
225 #define TCCMD (*(REG32_PTR_T)(0x3C700044)) /* Command Register for timer C */
226 #define TCDATA0 (*(REG32_PTR_T)(0x3C700048)) /* Data0 Register */
227 #define TCDATA1 (*(REG32_PTR_T)(0x3C70004C)) /* Data1 Register */
228 #define TCPRE (*(REG32_PTR_T)(0x3C700050)) /* Pre-scale register */
229 #define TCCNT (*(REG32_PTR_T)(0x3C700054)) /* Counter register */
230 #define TDCON (*(REG32_PTR_T)(0x3C700060)) /* Control Register for timer D */
231 #define TDCMD (*(REG32_PTR_T)(0x3C700064)) /* Command Register for timer D */
232 #define TDDATA0 (*(REG32_PTR_T)(0x3C700068)) /* Data0 Register */
233 #define TDDATA1 (*(REG32_PTR_T)(0x3C70006C)) /* Data1 Register */
234 #define TDPRE (*(REG32_PTR_T)(0x3C700070)) /* Pre-scale register */
235 #define TDCNT (*(REG32_PTR_T)(0x3C700074)) /* Counter register */
237 /* 12. NAND FLASH CONTROLER */
238 #define FMCTRL0 (*(REG32_PTR_T)(0x3C200000)) /* Control Register0 */
239 #define FMCTRL1 (*(REG32_PTR_T)(0x3C200004)) /* Control Register1 */
240 #define FMCMD (*(REG32_PTR_T)(0x3C200008)) /* Command Register */
241 #define FMADDR0 (*(REG32_PTR_T)(0x3C20000C)) /* Address Register0 */
242 #define FMADDR1 (*(REG32_PTR_T)(0x3C200010)) /* Address Register1 */
243 #define FMADDR2 (*(REG32_PTR_T)(0x3C200014)) /* Address Register2 */
244 #define FMADDR3 (*(REG32_PTR_T)(0x3C200018)) /* Address Register3 */
245 #define FMADDR4 (*(REG32_PTR_T)(0x3C20001C)) /* Address Register4 */
246 #define FMADDR5 (*(REG32_PTR_T)(0x3C200020)) /* Address Register5 */
247 #define FMADDR6 (*(REG32_PTR_T)(0x3C200024)) /* Address Register6 */
248 #define FMADDR7 (*(REG32_PTR_T)(0x3C200028)) /* Address Register7 */
249 #define FMANUM (*(REG32_PTR_T)(0x3C20002C)) /* Address Counter Register */
250 #define FMDNUM (*(REG32_PTR_T)(0x3C200030)) /* Data Counter Register */
251 #define FMDATAW0 (*(REG32_PTR_T)(0x3C200034)) /* Write Data Register0 */
252 #define FMDATAW1 (*(REG32_PTR_T)(0x3C200038)) /* Write Data Register1 */
253 #define FMDATAW2 (*(REG32_PTR_T)(0x3C20003C)) /* Write Data Register2 */
254 #define FMDATAW3 (*(REG32_PTR_T)(0x3C200040)) /* Write Data Register3 */
255 #define FMCSTAT (*(REG32_PTR_T)(0x3C200048)) /* Status Register */
256 #define FMSYND0 (*(REG32_PTR_T)(0x3C20004C)) /* Hamming Syndrome0 */
257 #define FMSYND1 (*(REG32_PTR_T)(0x3C200050)) /* Hamming Syndrome1 */
258 #define FMSYND2 (*(REG32_PTR_T)(0x3C200054)) /* Hamming Syndrome2 */
259 #define FMSYND3 (*(REG32_PTR_T)(0x3C200058)) /* Hamming Syndrome3 */
260 #define FMSYND4 (*(REG32_PTR_T)(0x3C20005C)) /* Hamming Syndrome4 */
261 #define FMSYND5 (*(REG32_PTR_T)(0x3C200060)) /* Hamming Syndrome5 */
262 #define FMSYND6 (*(REG32_PTR_T)(0x3C200064)) /* Hamming Syndrome6 */
263 #define FMSYND7 (*(REG32_PTR_T)(0x3C200068)) /* Hamming Syndrome7 */
264 #define FMFIFO (*(REG32_PTR_T)(0x3C200080)) /* WRITE/READ FIFO FIXME */
265 #define RSCRTL (*(REG32_PTR_T)(0x3C200100)) /* Reed-Solomon Control Register */
266 #define RSPaity0_0 (*(REG32_PTR_T)(0x3C200110)) /* On-the-fly Parity Register0[31:0] */
267 #define RSPaity0_1 (*(REG32_PTR_T)(0x3C200114)) /* On-the-fly Parity Register0[63:32] */
268 #define RSPaity0_2 (*(REG32_PTR_T)(0x3C200118)) /* On-the-fly Parity Register0[71:64] */
269 #define RSPaity1_0 (*(REG32_PTR_T)(0x3C200120)) /* On-the-fly Parity Register1[31:0] */
270 #define RSPaity1_1 (*(REG32_PTR_T)(0x3C200124)) /* On-the-fly Parity Register1[63:32] */
271 #define RSPaity1_2 (*(REG32_PTR_T)(0x3C200128)) /* On-the-fly Parity Register1[71:64] */
272 #define RSPaity2_0 (*(REG32_PTR_T)(0x3C200130)) /* On-the-fly Parity Register2[31:0] */
273 #define RSPaity2_1 (*(REG32_PTR_T)(0x3C200134)) /* On-the-fly Parity Register2[63:32] */
274 #define RSPaity2_2 (*(REG32_PTR_T)(0x3C200138)) /* On-the-fly Parity Register2[71:64] */
275 #define RSPaity3_0 (*(REG32_PTR_T)(0x3C200140)) /* On-the-fly Parity Register3[31:0] */
276 #define RSPaity3_1 (*(REG32_PTR_T)(0x3C200144)) /* On-the-fly Parity Register3[63:32] */
277 #define RSPaity3_2 (*(REG32_PTR_T)(0x3C200148)) /* On-the-fly Parity Register3[71:64] */
278 #define RSSynd0_0 (*(REG32_PTR_T)(0x3C200150)) /* On-the-fly Synd Register0[31:0] */
279 #define RSSynd0_1 (*(REG32_PTR_T)(0x3C200154)) /* On-the-fly Synd Register0[63:32] */
280 #define RSSynd0_2 (*(REG32_PTR_T)(0x3C200158)) /* On-the-fly Synd Register0[71:64] */
281 #define RSSynd1_0 (*(REG32_PTR_T)(0x3C200160)) /* On-the-fly Synd Register1[31:0] */
282 #define RSSynd1_1 (*(REG32_PTR_T)(0x3C200164)) /* On-the-fly Synd Register1[63:32] */
283 #define RSSynd1_2 (*(REG32_PTR_T)(0x3C200168)) /* On-the-fly Synd Register1[71:64] */
284 #define RSSynd2_0 (*(REG32_PTR_T)(0x3C200170)) /* On-the-fly Synd Register2[31:0] */
285 #define RSSynd2_1 (*(REG32_PTR_T)(0x3C200174)) /* On-the-fly Synd Register2[63:32] */
286 #define RSSynd2_2 (*(REG32_PTR_T)(0x3C200178)) /* On-the-fly Synd Register2[71:64] */
287 #define RSSynd3_0 (*(REG32_PTR_T)(0x3C200180)) /* On-the-fly Synd Register3[31:0] */
288 #define RSSynd3_1 (*(REG32_PTR_T)(0x3C200184)) /* On-the-fly Synd Register3[63:32] */
289 #define RSSynd3_2 (*(REG32_PTR_T)(0x3C200188)) /* On-the-fly Synd Register3[71:64] */
290 #define FlagSynd (*(REG32_PTR_T)(0x3C200190)) /* On-the-fly ECC Result Flag */
292 /* 13. SECURE DIGITAL CARD INTERFACE (SDCI) */
293 #define SDCI_CTRL (*(REG32_PTR_T)(0x3C300000)) /* Control Register */
294 #define SDCI_DCTRL (*(REG32_PTR_T)(0x3C300004)) /* Data Control Register */
295 #define SDCI_CMD (*(REG32_PTR_T)(0x3C300008)) /* Command Register */
296 #define SDCI_ARGU (*(REG32_PTR_T)(0x3C30000C)) /* Argument Register */
297 #define SDCI_STATE (*(REG32_PTR_T)(0x3C300010)) /* State Register */
298 #define SDCI_STAC (*(REG32_PTR_T)(0x3C300014)) /* Status Clear Register */
299 #define SDCI_DSTA (*(REG32_PTR_T)(0x3C300018)) /* Data Status Register */
300 #define SDCI_FSTA (*(REG32_PTR_T)(0x3C30001C)) /* FIFO Status Register */
301 #define SDCI_RESP0 (*(REG32_PTR_T)(0x3C300020)) /* Response0 Register */
302 #define SDCI_RESP1 (*(REG32_PTR_T)(0x3C300024)) /* Response1 Register */
303 #define SDCI_RESP2 (*(REG32_PTR_T)(0x3C300028)) /* Response2 Register */
304 #define SDCI_RESP3 (*(REG32_PTR_T)(0x3C30002C)) /* Response3 Register */
305 #define SDCI_CLKDIV (*(REG32_PTR_T)(0x3C300030)) /* Clock Divider Register */
306 #define SDIO_CSR (*(REG32_PTR_T)(0x3C300034)) /* SDIO Control & Status Register */
307 #define SDIO_IRQ (*(REG32_PTR_T)(0x3C300038)) /* Interrupt Source Register */
309 /* 14. MEMORY STICK HOST CONTROLLER */
310 #define MSPRE (*(REG32_PTR_T)(0x3C600000)) /* Prescaler Register */
311 #define MSINTEN (*(REG32_PTR_T)(0x3C600004)) /* Interrupt Enable Register */
312 #define MSCMD (*(REG32_PTR_T)(0x3C601000)) /* Command Register */
313 #define MSFIFO (*(REG32_PTR_T)(0x3C601008)) /* Receive/Transmit Register */
314 #define MSPP (*(REG32_PTR_T)(0x3C601010)) /* Parallel Port Control/Data Register */
315 #define MSCTRL2 (*(REG32_PTR_T)(0x3C601014)) /* Control Register 2 */
316 #define MSACD (*(REG32_PTR_T)(0x3C601018)) /* ACD Command Register */
318 /* 15. SPDIF TRANSMITTER (SPDIFOUT) */
319 #define SPDCLKCON (*(REG32_PTR_T)(0x3CB00000)) /* Clock Control Register */
320 #define SPDCON (*(REG32_PTR_T)(0x3CB00004)) /* Control Register 0020 */
321 #define SPDBSTAS (*(REG32_PTR_T)(0x3CB00008)) /* Burst Status Register */
322 #define SPDCSTAS (*(REG32_PTR_T)(0x3CB0000C)) /* Channel Status Register 0x2000 8000 */
323 #define SPDDAT (*(REG32_PTR_T)(0x3CB00010)) /* SPDIFOUT Data Buffer */
324 #define SPDCNT (*(REG32_PTR_T)(0x3CB00014)) /* Repetition Count Register */
326 /* 16. REED-SOLOMON ECC CODEC */
327 #define DATA_PTR (*(REG32_PTR_T)(0x39E00004)) /* Data Area Start Pointer */
328 #define SPARE_PTR (*(REG32_PTR_T)(0x39E00008)) /* Spare Area Start Pointer */
329 #define ECC_CTRL (*(REG32_PTR_T)(0x39E0000C)) /* ECC Control Register */
330 #define ECC_RESULT (*(REG32_PTR_T)(0x39E00010)) /* ECC Result */
331 #define ECC_EVAL0 (*(REG32_PTR_T)(0x39E00020)) /* Error Eval0 Poly */
332 #define ECC_EVAL1 (*(REG32_PTR_T)(0x39E00024)) /* Error Eval1 Poly */
333 #define ECC_LOC0 (*(REG32_PTR_T)(0x39E00028)) /* Error Loc0 Poly */
334 #define ECC_LOC1 (*(REG32_PTR_T)(0x39E0002C)) /* Error Loc1 Poly */
335 #define PARITY0 (*(REG32_PTR_T)(0x39E00030)) /* Encode Parity0 Poly */
336 #define PARITY1 (*(REG32_PTR_T)(0x39E00034)) /* Encode Pariyt1 Poly */
337 #define PARITY2 (*(REG32_PTR_T)(0x39E00038)) /* Encode Parity2 Poly */
338 #define INT_CLR (*(REG32_PTR_T)(0x39E00040)) /* Interrupt Clear Register */
339 #define SYND0 (*(REG32_PTR_T)(0x39E00044)) /* Syndrom0 Poly */
340 #define SYND1 (*(REG32_PTR_T)(0x39E00048)) /* Syndrom1 Poly */
341 #define SYND2 (*(REG32_PTR_T)(0x39E0004C)) /* Syndrom2 Poly */
343 /* 17. IIS Tx/Rx INTERFACE */
344 #define I2SCLKCON (*(REG32_PTR_T)(0x3CA00000)) /* Clock Control Register */
345 #define I2STXCON (*(REG32_PTR_T)(0x3CA00004)) /* Tx configuration Register */
346 #define I2STXCOM (*(REG32_PTR_T)(0x3CA00008)) /* Tx command Register */
347 #define I2STXDB0 (*(REG32_PTR_T)(0x3CA00010)) /* Tx data buffer */
348 #define I2SRXCON (*(REG32_PTR_T)(0x3CA00030)) /* Rx configuration Register */
349 #define I2SRXCOM (*(REG32_PTR_T)(0x3CA00034)) /* Rx command Register */
350 #define I2SRXDB (*(REG32_PTR_T)(0x3CA00038)) /* Rx data buffer */
351 #define I2SSTATUS (*(REG32_PTR_T)(0x3CA0003C)) /* status register */
353 /* 18. IIC BUS INTERFACE */
354 #define IICCON (*(REG32_PTR_T)(0x3C900000)) /* Control Register */
355 #define IICSTAT (*(REG32_PTR_T)(0x3C900004)) /* Control/Status Register */
356 #define IICADD (*(REG32_PTR_T)(0x3C900008)) /* Bus Address Register */
357 #define IICDS (*(REG32_PTR_T)(0x3C90000C))
359 /* 19. SPI (SERIAL PERHIPERAL INTERFACE) */
360 #define SPCLKCON (*(REG32_PTR_T)(0x3CD00000)) /* Clock Control Register */
361 #define SPCON (*(REG32_PTR_T)(0x3CD00004)) /* Control Register */
362 #define SPSTA (*(REG32_PTR_T)(0x3CD00008)) /* Status Register */
363 #define SPPIN (*(REG32_PTR_T)(0x3CD0000C)) /* Pin Control Register */
364 #define SPTDAT (*(REG32_PTR_T)(0x3CD00010)) /* Tx Data Register */
365 #define SPRDAT (*(REG32_PTR_T)(0x3CD00014)) /* Rx Data Register */
366 #define SPPRE (*(REG32_PTR_T)(0x3CD00018)) /* Baud Rate Prescaler Register */
368 /* 20. ADC CONTROLLER */
369 #define ADCCON (*(REG32_PTR_T)(0x3CE00000)) /* ADC Control Register */
370 #define ADCTSC (*(REG32_PTR_T)(0x3CE00004)) /* ADC Touch Screen Control Register */
371 #define ADCDLY (*(REG32_PTR_T)(0x3CE00008)) /* ADC Start or Interval Delay Register */
372 #define ADCDAT0 (*(REG32_PTR_T)(0x3CE0000C)) /* ADC Conversion Data Register */
373 #define ADCDAT1 (*(REG32_PTR_T)(0x3CE00010)) /* ADC Conversion Data Register */
374 #define ADCUPDN (*(REG32_PTR_T)(0x3CE00014)) /* Stylus Up or Down Interrpt Register */
376 /* 21. USB 2.0 FUNCTION CONTROLER SPECIAL REGISTER */
377 #define IR (*(REG32_PTR_T)(0x38800000)) /* Index Register */
378 #define EIR (*(REG32_PTR_T)(0x38800004)) /* Endpoint Interrupt Register */
379 #define EIER (*(REG32_PTR_T)(0x38800008)) /* Endpoint Interrupt Enable Register */
380 #define FAR (*(REG32_PTR_T)(0x3880000C)) /* Function Address Register */
381 #define FNR (*(REG32_PTR_T)(0x38800010)) /* Frame Number Register */
382 #define EDR (*(REG32_PTR_T)(0x38800014)) /* Endpoint Direction Register */
383 #define TR (*(REG32_PTR_T)(0x38800018)) /* Test Register */
384 #define SSR (*(REG32_PTR_T)(0x3880001C)) /* System Status Register */
385 #define SCR (*(REG32_PTR_T)(0x38800020)) /* System Control Register */
386 #define EP0SR (*(REG32_PTR_T)(0x38800024)) /* EP0 Status Register */
387 #define EP0CR (*(REG32_PTR_T)(0x38800028)) /* EP0 Control Register */
388 #define ESR (*(REG32_PTR_T)(0x3880002C)) /* Endpoints Status Register */
389 #define ECR (*(REG32_PTR_T)(0x38800030)) /* Endpoints Control Register */
390 #define BRCR (*(REG32_PTR_T)(0x38800034)) /* Byte Read Count Register */
391 #define BWCR (*(REG32_PTR_T)(0x38800038)) /* Byte Write Count Register */
392 #define MPR (*(REG32_PTR_T)(0x3880003C)) /* Max Packet Register */
393 #define MCR (*(REG32_PTR_T)(0x38800040)) /* Master Control Register */
394 #define MTCR (*(REG32_PTR_T)(0x38800044)) /* Master Transfer Counter Register */
395 #define MFCR (*(REG32_PTR_T)(0x38800048)) /* Master FIFO Counter Register */
396 #define MTTCR1 (*(REG32_PTR_T)(0x3880004C)) /* Master Total Transfer Counter1 Register */
397 #define MTTCR2 (*(REG32_PTR_T)(0x38800050)) /* Master Total Transfer Counter2 Register */
398 #define EP0BR (*(REG32_PTR_T)(0x38800060)) /* EP0 Buffer Register */
399 #define EP1BR (*(REG32_PTR_T)(0x38800064)) /* EP1 Buffer Register */
400 #define EP2BR (*(REG32_PTR_T)(0x38800068)) /* EP2 Buffer Register */
401 #define EP3BR (*(REG32_PTR_T)(0x3880006C)) /* EP3 Buffer Register */
402 #define EP4BR (*(REG32_PTR_T)(0x38800070)) /* EP4 Buffer Register */
403 #define EP5BR (*(REG32_PTR_T)(0x38800074)) /* EP5 Buffer Register */
404 #define EP6BR (*(REG32_PTR_T)(0x38800078)) /* EP6 Buffer Register */
405 #define MICR (*(REG32_PTR_T)(0x38800084)) /* Master Interface Counter Register */
406 #define MBAR1 (*(REG32_PTR_T)(0x38800088)) /* Memory Base Address Register1 */
407 #define MBAR2 (*(REG32_PTR_T)(0x3880008C)) /* Memory Base Address Register2 */
408 #define MCAR1 (*(REG32_PTR_T)(0x38800094)) /* Memory Current Address Register1 */
409 #define MCAR2 (*(REG32_PTR_T)(0x38800098)) /* Memory Current Address Register2 */
411 /* 22. USB 1.1 HOST CONTROLER SPECIAL REGISTER */
412 #define HcRevision (*(REG32_PTR_T)(0x38600000))
413 #define HcControl (*(REG32_PTR_T)(0x38600004))
414 #define HcCommandStatus (*(REG32_PTR_T)(0x38600008))
415 #define HcInterruptStatus (*(REG32_PTR_T)(0x3860000C))
416 #define HcInterruptEnable (*(REG32_PTR_T)(0x38600010))
417 #define HcInterruptDisable (*(REG32_PTR_T)(0x38600014))
418 #define HcHCCA (*(REG32_PTR_T)(0x38600018))
419 #define HcPeriodCurrentED (*(REG32_PTR_T)(0x3860001C))
420 #define HcControlHeadED (*(REG32_PTR_T)(0x38600020))
421 #define HcControlCurrentED (*(REG32_PTR_T)(0x38600024))
422 #define HcBulkHeadED (*(REG32_PTR_T)(0x38600028))
423 #define HcBulkCurrentED (*(REG32_PTR_T)(0x3860002C))
424 #define HcDoneHead (*(REG32_PTR_T)(0x38600030))
425 #define HcFmInterval (*(REG32_PTR_T)(0x38600034))
426 #define HcFmRemaining (*(REG32_PTR_T)(0x38600038))
427 #define HcFmNumber (*(REG32_PTR_T)(0x3860003C))
428 #define HcPeriodicStart (*(REG32_PTR_T)(0x38600040))
429 #define HcLSThreshold (*(REG32_PTR_T)(0x38600044))
430 #define HcRhDescriptorA (*(REG32_PTR_T)(0x38600048))
431 #define HcRhDescriptorB (*(REG32_PTR_T)(0x3860004C))
432 #define HcRhStatus (*(REG32_PTR_T)(0x38600050))
433 #define HcRhPortStatus (*(REG32_PTR_T)(0x38600054))
435 /* 23. USB 2.0 PHY CONTROL */
436 #define PHYCTRL (*(REG32_PTR_T)(0x3C400000)) /* USB2.0 PHY Control Register */
437 #define PHYPWR (*(REG32_PTR_T)(0x3C400004)) /* USB2.0 PHY Power Control Register */
438 #define URSTCON (*(REG32_PTR_T)(0x3C400008)) /* USB Reset Control Register */
439 #define UCLKCON (*(REG32_PTR_T)(0x3C400010)) /* USB Clock Control Register */
441 /* 24. GPIO PORT CONTROLL */
442 #define PCON0 (*(REG32_PTR_T)(0x3CF00000)) /* Configures the pins of port 0 */
443 #define PDAT0 (*(REG32_PTR_T)(0x3CF00004)) /* The data register for port 0 */
444 #define PCON1 (*(REG32_PTR_T)(0x3CF00010)) /* Configures the pins of port 0 */
445 #define PDAT1 (*(REG32_PTR_T)(0x3CF00014)) /* The data register for port 0 */
446 #define PCON2 (*(REG32_PTR_T)(0x3CF00020)) /* Configures the pins of port 0 */
447 #define PDAT2 (*(REG32_PTR_T)(0x3CF00024)) /* The data register for port 0 */
448 #define PCON3 (*(REG32_PTR_T)(0x3CF00030)) /* Configures the pins of port 0 */
449 #define PDAT3 (*(REG32_PTR_T)(0x3CF00034)) /* The data register for port 0 */
450 #define PCON4 (*(REG32_PTR_T)(0x3CF00040)) /* Configures the pins of port 0 */
451 #define PDAT4 (*(REG32_PTR_T)(0x3CF00044)) /* The data register for port 0 */
452 #define PCON5 (*(REG32_PTR_T)(0x3CF00050)) /* Configures the pins of port 0 */
453 #define PDAT5 (*(REG32_PTR_T)(0x3CF00054)) /* The data register for port 0 */
454 #define PCON6 (*(REG32_PTR_T)(0x3CF00060)) /* Configures the pins of port 0 */
455 #define PDAT6 (*(REG32_PTR_T)(0x3CF00064)) /* The data register for port 0 */
456 #define PCON7 (*(REG32_PTR_T)(0x3CF00070)) /* Configures the pins of port 0 */
457 #define PDAT7 (*(REG32_PTR_T)(0x3CF00074)) /* The data register for port 0 */
458 #define PCON10 (*(REG32_PTR_T)(0x3CF000A0)) /* Configures the pins of port 0 */
459 #define PDAT10 (*(REG32_PTR_T)(0x3CF000A4)) /* The data register for port 0 */
460 #define PCON_ASRAM (*(REG32_PTR_T)(0x3CF000F0)) /* Configures the pins of port nor flash */
461 #define PCON_SDRAM (*(REG32_PTR_T)(0x3CF000F4)) /* Configures the pins of port sdram */
462 #define PCON11 (*(REG32_PTR_T)(0x3CF000F8)) /* Configures the pins of port 11 */
463 #define PDAT11 (*(REG32_PTR_T)(0x3CF000FC)) /* The data register for port 11 */
468 #define ULCON0 (*(REG32_PTR_T)(0x3CC00000)) /* Line Control Register */
469 #define UCON0 (*(REG32_PTR_T)(0x3CC00004)) /* Control Register */
470 #define UFCON0 (*(REG32_PTR_T)(0x3CC00008)) /* FIFO Control Register */
471 #define UMCON0 (*(REG32_PTR_T)(0x3CC0000C)) /* Modem Control Register */
472 #define UTRSTAT0 (*(REG32_PTR_T)(0x3CC00010)) /* Tx/Rx Status Register */
473 #define UERSTAT0 (*(REG32_PTR_T)(0x3CC00014)) /* Rx Error Status Register */
474 #define UFSTAT0 (*(REG32_PTR_T)(0x3CC00018)) /* FIFO Status Register */
475 #define UMSTAT0 (*(REG32_PTR_T)(0x3CC0001C)) /* Modem Status Register */
476 #define UTXH0 (*(REG32_PTR_T)(0x3CC00020)) /* Transmit Buffer Register */
477 #define URXH0 (*(REG32_PTR_T)(0x3CC00024)) /* Receive Buffer Register */
478 #define UBRDIV0 (*(REG32_PTR_T)(0x3CC00028)) /* Baud Rate Divisor Register */
481 #define ULCON1 (*(REG32_PTR_T)(0x3CC08000)) /* Line Control Register */
482 #define UCON1 (*(REG32_PTR_T)(0x3CC08004)) /* Control Register */
483 #define UFCON1 (*(REG32_PTR_T)(0x3CC08008)) /* FIFO Control Register */
484 #define UMCON1 (*(REG32_PTR_T)(0x3CC0800C)) /* Modem Control Register */
485 #define UTRSTAT1 (*(REG32_PTR_T)(0x3CC08010)) /* Tx/Rx Status Register */
486 #define UERSTAT1 (*(REG32_PTR_T)(0x3CC08014)) /* Rx Error Status Register */
487 #define UFSTAT1 (*(REG32_PTR_T)(0x3CC08018)) /* FIFO Status Register */
488 #define UMSTAT1 (*(REG32_PTR_T)(0x3CC0801C)) /* Modem Status Register */
489 #define UTXH1 (*(REG32_PTR_T)(0x3CC08020)) /* Transmit Buffer Register */
490 #define URXH1 (*(REG32_PTR_T)(0x3CC08024)) /* Receive Buffer Register */
491 #define UBRDIV1 (*(REG32_PTR_T)(0x3CC08028)) /* Baud Rate Divisor Register */
493 /* 26. LCD INTERFACE CONTROLLER */
494 #define LCD_CON (*(REG32_PTR_T)(0x3C100000)) /* Control register. */
495 #define LCD_WCMD (*(REG32_PTR_T)(0x3C100004)) /* Write command register. */
496 #define LCD_RCMD (*(REG32_PTR_T)(0x3C10000C)) /* Read command register. */
497 #define LCD_RDATA (*(REG32_PTR_T)(0x3C100010)) /* Read data register. */
498 #define LCD_DBUFF (*(REG32_PTR_T)(0x3C100014)) /* Read Data buffer */
499 #define LCD_INTCON (*(REG32_PTR_T)(0x3C100018)) /* Interrupt control register */
500 #define LCD_STATUS (*(REG32_PTR_T)(0x3C10001C)) /* LCD Interface status 0106 */
501 #define LCD_PHTIME (*(REG32_PTR_T)(0x3C100020)) /* Phase time register 0060 */
502 #define LCD_RST_TIME (*(REG32_PTR_T)(0x3C100024)) /* Reset active period 07FF */
503 #define LCD_DRV_RST (*(REG32_PTR_T)(0x3C100028)) /* Reset drive signal */
504 #define LCD_WDATA (*(REG32_PTR_T)(0x3C100040)) /* Write data register FIXME */
506 /* 27. CLCD CONTROLLER */
507 #define LCDCON1 (*(REG32_PTR_T)(0x39200000)) /* LCD control 1 register */
508 #define LCDCON2 (*(REG32_PTR_T)(0x39200004)) /* LCD control 2 register */
509 #define LCDTCON1 (*(REG32_PTR_T)(0x39200008)) /* LCD time control 1 register */
510 #define LCDTCON2 (*(REG32_PTR_T)(0x3920000C)) /* LCD time control 2 register */
511 #define LCDTCON3 (*(REG32_PTR_T)(0x39200010)) /* LCD time control 3 register */
512 #define LCDOSD1 (*(REG32_PTR_T)(0x39200014)) /* LCD OSD control 1 register */
513 #define LCDOSD2 (*(REG32_PTR_T)(0x39200018)) /* LCD OSD control 2 register */
514 #define LCDOSD3 (*(REG32_PTR_T)(0x3920001C)) /* LCD OSD control 3 register */
515 #define LCDB1SADDR1 (*(REG32_PTR_T)(0x39200020)) /* Frame buffer start address register for Back-Ground buffer 1 */
516 #define LCDB2SADDR1 (*(REG32_PTR_T)(0x39200024)) /* Frame buffer start address register for Back-Ground buffer 2 */
517 #define LCDF1SADDR1 (*(REG32_PTR_T)(0x39200028)) /* Frame buffer start address register for Fore-Ground (OSD) buffer 1 */
518 #define LCDF2SADDR1 (*(REG32_PTR_T)(0x3920002C)) /* Frame buffer start address register for Fore-Ground (OSD) buffer 2 */
519 #define LCDB1SADDR2 (*(REG32_PTR_T)(0x39200030)) /* Frame buffer end address register for Back-Ground buffer 1 */
520 #define LCDB2SADDR2 (*(REG32_PTR_T)(0x39200034)) /* Frame buffer end address register for Back-Ground buffer 2 */
521 #define LCDF1SADDR2 (*(REG32_PTR_T)(0x39200038)) /* Frame buffer end address register for Fore-Ground (OSD) buffer 1 */
522 #define LCDF2SADDR2 (*(REG32_PTR_T)(0x3920003C)) /* Frame buffer end address register for Fore-Ground (OSD) buffer 2 */
523 #define LCDB1SADDR3 (*(REG32_PTR_T)(0x39200040)) /* Virtual screen address set for Back-Ground buffer 1 */
524 #define LCDB2SADDR3 (*(REG32_PTR_T)(0x39200044)) /* Virtual screen address set for Back-Ground buffer 2 */
525 #define LCDF1SADDR3 (*(REG32_PTR_T)(0x39200048)) /* Virtual screen address set for Fore-Ground(OSD) buffer 1 */
526 #define LCDF2SADDR3 (*(REG32_PTR_T)(0x3920004C)) /* Virtual screen address set for Fore-Ground(OSD) buffer 2 */
527 #define LCDINTCON (*(REG32_PTR_T)(0x39200050)) /* Indicate the LCD interrupt control register */
528 #define KEYCON (*(REG32_PTR_T)(0x39200054)) /* Color key control register */
529 #define COLVAL (*(REG32_PTR_T)(0x39200058)) /* Color key value ( transparent value) register */
530 #define BGCON (*(REG32_PTR_T)(0x3920005C)) /* Back-Ground color control */
531 #define FGCON (*(REG32_PTR_T)(0x39200060)) /* Fore-Ground color control */
532 #define DITHMODE (*(REG32_PTR_T)(0x39200064)) /* Dithering mode register. */
534 /* 28. ATA CONTROLLER */
535 #define ATA_CONTROL (*(REG32_PTR_T)(0x38E00000)) /* Enable and clock down status */
536 #define ATA_STATUS (*(REG32_PTR_T)(0x38E00004)) /* Status */
537 #define ATA_COMMAND (*(REG32_PTR_T)(0x38E00008)) /* Command */
538 #define ATA_SWRST (*(REG32_PTR_T)(0x38E0000C)) /* Software reset */
539 #define ATA_IRQ (*(REG32_PTR_T)(0x38E00010)) /* Interrupt sources */
540 #define ATA_IRQ_MASK (*(REG32_PTR_T)(0x38E00014)) /* Interrupt mask */
541 #define ATA_CFG (*(REG32_PTR_T)(0x38E00018)) /* Configuration for ATA interface */
542 #define ATA_PIO_TIME (*(REG32_PTR_T)(0x38E0002C)) /* PIO timing */
543 #define ATA_UDMA_TIME (*(REG32_PTR_T)(0x38E00030)) /* UDMA timing */
544 #define ATA_XFR_NUM (*(REG32_PTR_T)(0x38E00034)) /* Transfer number */
545 #define ATA_XFR_CNT (*(REG32_PTR_T)(0x38E00038)) /* Current transfer count */
546 #define ATA_TBUF_START (*(REG32_PTR_T)(0x38E0003C)) /* Start address of track buffer */
547 #define ATA_TBUF_SIZE (*(REG32_PTR_T)(0x38E00040)) /* Size of track buffer */
548 #define ATA_SBUF_START (*(REG32_PTR_T)(0x38E00044)) /* Start address of Source buffer1 */
549 #define ATA_SBUF_SIZE (*(REG32_PTR_T)(0x38E00048)) /* Size of source buffer1 */
550 #define ATA_CADR_TBUF (*(REG32_PTR_T)(0x38E0004C)) /* Current write address of track buffer */
551 #define ATA_CADR_SBUF (*(REG32_PTR_T)(0x38E00050)) /* Current read address of source buffer */
552 #define ATA_PIO_DTR (*(REG32_PTR_T)(0x38E00054)) /* PIO device data register */
553 #define ATA_PIO_FED (*(REG32_PTR_T)(0x38E00058)) /* PIO device Feature/Error register */
554 #define ATA_PIO_SCR (*(REG32_PTR_T)(0x38E0005C)) /* PIO sector count register */
555 #define ATA_PIO_LLR (*(REG32_PTR_T)(0x38E00060)) /* PIO device LBA low register */
556 #define ATA_PIO_LMR (*(REG32_PTR_T)(0x38E00064)) /* PIO device LBA middle register */
557 #define ATA_PIO_LHR (*(REG32_PTR_T)(0x38E00068)) /* PIO device LBA high register */
558 #define ATA_PIO_DVR (*(REG32_PTR_T)(0x38E0006C)) /* PIO device register */
559 #define ATA_PIO_CSD (*(REG32_PTR_T)(0x38E00070)) /* PIO device command/status register */
560 #define ATA_PIO_DAD (*(REG32_PTR_T)(0x38E00074)) /* PIO control/alternate status register */
561 #define ATA_PIO_READY (*(REG32_PTR_T)(0x38E00078)) /* PIO data read/write ready */
562 #define ATA_PIO_RDATA (*(REG32_PTR_T)(0x38E0007C)) /* PIO read data from device register */
563 #define BUS_FIFO_STATUS (*(REG32_PTR_T)(0x38E00080)) /* Reserved */
564 #define ATA_FIFO_STATUS (*(REG32_PTR_T)(0x38E00084)) /* Reserved */
567 #define REG_ONE (*(REG32_PTR_T)(0x3D100000)) /* Receive the first 32 bits from a fuse box */
568 #define REG_TWO (*(REG32_PTR_T)(0x3D100004)) /* Receive the other 8 bits from a fuse box */
