firmware/powermgmt.c

   1 /***************************************************************************
   2  *             __________               __   ___.
   3  *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
   4  *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
   5  *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
   6  *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
   7  *                     \/            \/     \/    \/            \/
   8  * $Id$
   9  *
  10  * Copyright (C) 2002 by Heikki Hannikainen, Uwe Freese
  11  * Revisions copyright (C) 2005 by Gerald Van Baren
  12  *
  13  * This program is free software; you can redistribute it and/or
  14  * modify it under the terms of the GNU General Public License
  15  * as published by the Free Software Foundation; either version 2
  16  * of the License, or (at your option) any later version.
  17  *
  18  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  19  * KIND, either express or implied.
  20  *
  21  ****************************************************************************/
  22 #include "config.h"
  23 #include "system.h"
  24 #include "kernel.h"
  25 #include "thread.h"
  26 #include "debug.h"
  27 #include "adc.h"
  28 #include "string.h"
  29 #include "storage.h"
  30 #include "power.h"
  31 #include "audio.h"
  32 #include "mp3_playback.h"
  33 #include "usb.h"
  34 #include "powermgmt.h"
  35 #include "backlight.h"
  36 #include "lcd.h"
  37 #include "rtc.h"
  38 #if CONFIG_TUNER
  39 #include "fmradio.h"
  40 #endif
  41 #include "sound.h"
  42 #ifdef HAVE_LCD_BITMAP
  43 #include "font.h"
  44 #endif
  45 #include "logf.h"
  46 #include "lcd-remote.h"
  47 #ifdef SIMULATOR
  48 #include <time.h>
  49 #endif
  50
  51 #if (defined(IAUDIO_X5) || defined(IAUDIO_M5)) && !defined (SIMULATOR)
  52 #include "lcd-remote-target.h"
  53 #endif
  54 #if (defined(IAUDIO_X5) || defined(IAUDIO_M5) || defined(COWON_D2)) \
  55     && !defined (SIMULATOR)
  56 #include "pcf50606.h"
  57 #endif
  58
  59 /** Shared by sim **/
  60 int last_sent_battery_level = 100;
  61 /* battery level (0-100%) */
  62 int battery_percent = -1;
  63 void send_battery_level_event(void);
  64
  65 #if CONFIG_CHARGING
  66 /* State of the charger input as seen by the power thread */
  67 enum charger_input_state_type charger_input_state;
  68 /* Power inputs as seen by the power thread */
  69 unsigned int power_thread_inputs;
  70 #if CONFIG_CHARGING >= CHARGING_MONITOR
  71 /* Charging state (mode) as seen by the power thread */
  72 enum charge_state_type charge_state = DISCHARGING;
  73 #endif
  74 #endif /* CONFIG_CHARGING */
  75
  76 #ifndef SIMULATOR
  77 static int shutdown_timeout = 0;
  78 /*
  79  * Average battery voltage and charger voltage, filtered via a digital
  80  * exponential filter (aka. exponential moving average, scaled):
  81  * avgbat = y[n] = (N-1)/N*y[n-1] + x[n]. battery_millivolts = y[n] / N.
  82  */
  83 static unsigned int avgbat;
  84 /* filtered battery voltage, millivolts */
  85 static unsigned int battery_millivolts;
  86 /* default value, mAh */
  87 static int battery_capacity = BATTERY_CAPACITY_DEFAULT;
  88
  89
  90 #if BATTERY_TYPES_COUNT > 1
  91 static int battery_type = 0;
  92 #else
  93 #define battery_type 0
  94 #endif
  95
  96 /* Power history: power_history[0] is the newest sample */
  97 unsigned short power_history[POWER_HISTORY_LEN] = {0};
  98
  99 #if CONFIG_CPU == JZ4732 /* FIXME! */
 100 static char power_stack[DEFAULT_STACK_SIZE + POWERMGMT_DEBUG_STACK];
 101 #else
 102 static char power_stack[DEFAULT_STACK_SIZE/2 + POWERMGMT_DEBUG_STACK];
 103 #endif
 104 static const char power_thread_name[] = "power";
 105
 106 static int poweroff_timeout = 0;
 107 static int powermgmt_est_runningtime_min = -1;
 108
 109 static bool sleeptimer_active = false;
 110 static long sleeptimer_endtick;
 111
 112 static long last_event_tick;
 113
 114 static int voltage_to_battery_level(int battery_millivolts);
 115 static void battery_status_update(void);
 116
 117 #ifdef CURRENT_NORMAL   /*only used if we have run current*/
 118 static int runcurrent(void);
 119 #endif
 120
 121 void battery_read_info(int *voltage, int *level)
 122 {
 123     int millivolts = battery_adc_voltage();
 124
 125     if (voltage)
 126         *voltage = millivolts;
 127
 128     if (level)
 129         *level = voltage_to_battery_level(millivolts);
 130 }
 131
 132 void reset_poweroff_timer(void)
 133 {
 134     last_event_tick = current_tick;
 135 }
 136
 137 #if BATTERY_TYPES_COUNT > 1
 138 void set_battery_type(int type)
 139 {
 140     if (type != battery_type) {
 141         if ((unsigned)type >= BATTERY_TYPES_COUNT)
 142             type = 0;
 143
 144         battery_type = type;
 145         battery_status_update(); /* recalculate the battery status */
 146     }
 147 }
 148 #endif
 149
 150 void set_battery_capacity(int capacity)
 151 {
 152     if (capacity > BATTERY_CAPACITY_MAX)
 153         capacity = BATTERY_CAPACITY_MAX;
 154     if (capacity < BATTERY_CAPACITY_MIN)
 155         capacity = BATTERY_CAPACITY_MIN;
 156
 157     battery_capacity = capacity;
 158
 159     battery_status_update(); /* recalculate the battery status */
 160 }
 161
 162 int get_battery_capacity(void)
 163 {
 164     return battery_capacity;
 165 }
 166
 167 int battery_time(void)
 168 {
 169     return powermgmt_est_runningtime_min;
 170 }
 171
 172 /* Returns battery level in percent */
 173 int battery_level(void)
 174 {
 175 #ifdef HAVE_BATTERY_SWITCH
 176     if ((power_input_status() & POWER_INPUT_BATTERY) == 0)
 177         return -1;
 178 #endif
 179     return battery_percent;
 180 }
 181
 182 /* Returns filtered battery voltage [millivolts] */
 183 unsigned int battery_voltage(void)
 184 {
 185     return battery_millivolts;
 186 }
 187
 188 /* Tells if the battery level is safe for disk writes */
 189 bool battery_level_safe(void)
 190 {
 191 #if defined(NO_LOW_BATTERY_SHUTDOWN)
 192     return true;
 193 #elif defined(HAVE_BATTERY_SWITCH)
 194     /* Cannot rely upon the battery reading to be valid and the
 195      * device could be powered externally. */
 196     return input_millivolts() > battery_level_dangerous[battery_type];
 197 #else
 198     return battery_millivolts > battery_level_dangerous[battery_type];
 199 #endif
 200 }
 201
 202 void set_poweroff_timeout(int timeout)
 203 {
 204     poweroff_timeout = timeout;
 205 }
 206
 207 void set_sleep_timer(int seconds)
 208 {
 209     if (seconds) {
 210         sleeptimer_active  = true;
 211         sleeptimer_endtick = current_tick + seconds * HZ;
 212     }
 213     else {
 214         sleeptimer_active  = false;
 215         sleeptimer_endtick = 0;
 216     }
 217 }
 218
 219 int get_sleep_timer(void)
 220 {
 221     if (sleeptimer_active)
 222         return (sleeptimer_endtick - current_tick) / HZ;
 223     else
 224         return 0;
 225 }
 226
 227 /* look into the percent_to_volt_* table and get a realistic battery level */
 228 static int voltage_to_percent(int voltage, const short* table)
 229 {
 230     if (voltage <= table[0]) {
 231         return 0;
 232     }
 233     else if (voltage >= table[10]) {
 234         return 100;
 235     }
 236     else {
 237         /* search nearest value */
 238         int i = 0;
 239
 240         while (i < 10 && table[i+1] < voltage)
 241             i++;
 242
 243         /* interpolate linear between the smaller and greater value */
 244         /* Tens digit, 10% per entry,  ones digit: interpolated */
 245         return i*10 + (voltage - table[i])*10 / (table[i+1] - table[i]);
 246     }
 247 }
 248
 249 /* update battery level and estimated runtime, called once per minute or
 250  * when battery capacity / type settings are changed */
 251 static int voltage_to_battery_level(int battery_millivolts)
 252 {
 253     int level;
 254
 255 #if CONFIG_CHARGING >= CHARGING_MONITOR
 256     if (charging_state()) {
 257         /* battery level is defined to be < 100% until charging is finished */
 258         level = voltage_to_percent(battery_millivolts,
 259                                    percent_to_volt_charge);
 260         if (level > 99)
 261             level = 99;
 262     }
 263     else
 264 #endif /* CONFIG_CHARGING >= CHARGING_MONITOR */
 265     {
 266         /* DISCHARGING or error state */
 267         level = voltage_to_percent(battery_millivolts,
 268                                    percent_to_volt_discharge[battery_type]);
 269     }
 270
 271     return level;
 272 }
 273
 274 static void battery_status_update(void)
 275 {
 276     int level = voltage_to_battery_level(battery_millivolts);
 277
 278 #ifdef CURRENT_NORMAL  /*don't try to estimate run or charge
 279                         time without normal current defined*/
 280     /* calculate estimated remaining running time */
 281 #if CONFIG_CHARGING >= CHARGING_MONITOR
 282     if (charging_state()) {
 283         /* charging: remaining charging time */
 284         powermgmt_est_runningtime_min = (100 - level)*battery_capacity*60
 285                 / 100 / (CURRENT_MAX_CHG - runcurrent());
 286     }
 287     else
 288 #endif
 289
 290     /* discharging: remaining running time */
 291     if (battery_millivolts > percent_to_volt_discharge[0][0]) {
 292         /* linear extrapolation */
 293         powermgmt_est_runningtime_min = (level + battery_percent)*60
 294                 * battery_capacity / 200 / runcurrent();
 295     }
 296     if (0 > powermgmt_est_runningtime_min) {
 297         powermgmt_est_runningtime_min = 0;
 298     }
 299 #else
 300     powermgmt_est_runningtime_min=-1;
 301 #endif
 302
 303     battery_percent = level;
 304     send_battery_level_event();
 305 }
 306
 307 /*
 308  * We shut off in the following cases:
 309  * 1) The unit is idle, not playing music
 310  * 2) The unit is playing music, but is paused
 311  * 3) The battery level has reached shutdown limit
 312  *
 313  * We do not shut off in the following cases:
 314  * 1) The USB is connected
 315  * 2) The charger is connected
 316  * 3) We are recording, or recording with pause
 317  * 4) The radio is playing
 318  */
 319 static void handle_auto_poweroff(void)
 320 {
 321     long timeout = poweroff_timeout*60*HZ;
 322     int audio_stat = audio_status();
 323     long tick = current_tick;
 324
 325 #if CONFIG_CHARGING
 326     /*
 327      * Inhibit shutdown as long as the charger is plugged in.  If it is
 328      * unplugged, wait for a timeout period and then shut down.
 329      */
 330     if (charger_input_state == CHARGER || audio_stat == AUDIO_STATUS_PLAY) {
 331         last_event_tick = current_tick;
 332     }
 333 #endif
 334
 335     if (!shutdown_timeout && query_force_shutdown()) {
 336         backlight_on();
 337         sys_poweroff();
 338     }
 339
 340     if (timeout &&
 341 #if CONFIG_TUNER
 342         !(get_radio_status() & FMRADIO_PLAYING) &&
 343 #endif
 344         !usb_inserted() &&
 345         (audio_stat == 0 ||
 346          (audio_stat == (AUDIO_STATUS_PLAY | AUDIO_STATUS_PAUSE) &&
 347           !sleeptimer_active))) {
 348
 349         if (TIME_AFTER(tick, last_event_tick + timeout) &&
 350             TIME_AFTER(tick, storage_last_disk_activity() + timeout)) {
 351             sys_poweroff();
 352         }
 353     }
 354     else if (sleeptimer_active) {
 355         /* Handle sleeptimer */
 356         if (TIME_AFTER(tick, sleeptimer_endtick)) {
 357             audio_stop();
 358
 359             if (usb_inserted()
 360 #if CONFIG_CHARGING && !defined(HAVE_POWEROFF_WHILE_CHARGING)
 361                 || charger_input_state != NO_CHARGER
 362 #endif
 363             ) {
 364                 DEBUGF("Sleep timer timeout. Stopping...\n");
 365                 set_sleep_timer(0);
 366                 backlight_off(); /* Nighty, nighty... */
 367             }
 368             else {
 369                 DEBUGF("Sleep timer timeout. Shutting off...\n");
 370                 sys_poweroff();
 371             }
 372         }
 373     }
 374 }
 375
 376 #ifdef CURRENT_NORMAL /*check that we have a current defined in a config file*/
 377
 378 /*
 379  * Estimate how much current we are drawing just to run.
 380  */
 381 static int runcurrent(void)
 382 {
 383     int current = CURRENT_NORMAL;
 384
 385 #ifndef BOOTLOADER
 386     if (usb_inserted()
 387 #ifdef HAVE_USB_POWER
 388     #if (CURRENT_USB < CURRENT_NORMAL)
 389        || usb_powered()
 390     #else
 391        && !usb_powered()
 392     #endif
 393 #endif
 394     ) {
 395         current = CURRENT_USB;
 396     }
 397
 398 #if defined(HAVE_BACKLIGHT)
 399     if (backlight_get_current_timeout() == 0) /* LED always on */
 400         current += CURRENT_BACKLIGHT;
 401 #endif
 402
 403 #if defined(HAVE_RECORDING) && defined(CURRENT_RECORD)
 404     if (audio_status() & AUDIO_STATUS_RECORD)
 405         current += CURRENT_RECORD;
 406 #endif
 407
 408 #ifdef HAVE_SPDIF_POWER
 409     if (spdif_powered())
 410         current += CURRENT_SPDIF_OUT;
 411 #endif
 412
 413 #ifdef HAVE_REMOTE_LCD
 414     if (remote_detect())
 415         current += CURRENT_REMOTE;
 416 #endif
 417 #endif /* BOOTLOADER */
 418
 419     return current;
 420 }
 421
 422 #endif  /* CURRENT_NORMAL */
 423
 424 /* Check to see whether or not we've received an alarm in the last second */
 425 #ifdef HAVE_RTC_ALARM
 426 static void power_thread_rtc_process(void)
 427 {
 428     if (rtc_check_alarm_flag())
 429         rtc_enable_alarm(false);
 430 }
 431 #endif
 432
 433 /* switch off unit if battery level is too low for reliable operation */
 434 bool query_force_shutdown(void)
 435 {
 436 #if defined(NO_LOW_BATTERY_SHUTDOWN)
 437     return false;
 438 #elif defined(HAVE_BATTERY_SWITCH)
 439     /* Cannot rely upon the battery reading to be valid and the
 440      * device could be powered externally. */
 441     return input_millivolts() < battery_level_shutoff[battery_type];
 442 #else
 443     return battery_millivolts < battery_level_shutoff[battery_type];
 444 #endif
 445 }
 446
 447 #if defined(HAVE_BATTERY_SWITCH) || defined(HAVE_RESET_BATTERY_FILTER)
 448 /*
 449  * Reset the battery voltage filter to a new value and update the
 450  * status.
 451  */
 452 void reset_battery_filter(int millivolts)
 453 {
 454     avgbat = millivolts * BATT_AVE_SAMPLES;
 455     battery_millivolts = millivolts;
 456     battery_status_update();
 457 }
 458 #endif /* HAVE_BATTERY_SWITCH */
 459
 460 /** Generic charging algorithms for common charging types **/
 461 #if CONFIG_CHARGING == 0 || CONFIG_CHARGING == CHARGING_SIMPLE
 462 static inline void powermgmt_init_target(void)
 463 {
 464     /* Nothing to do */
 465 }
 466
 467 static inline void charging_algorithm_step(void)
 468 {
 469     /* Nothing to do */
 470 }
 471
 472 static inline void charging_algorithm_close(void)
 473 {
 474     /* Nothing to do */
 475 }
 476 #elif CONFIG_CHARGING == CHARGING_MONITOR
 477 /*
 478  * Monitor CHARGING/DISCHARGING state.
 479  */
 480 static inline void powermgmt_init_target(void)
 481 {
 482     /* Nothing to do */
 483 }
 484
 485 static inline void charging_algorithm_step(void)
 486 {
 487     switch (charger_input_state)
 488     {
 489     case CHARGER_PLUGGED:
 490     case CHARGER:
 491         if (charging_state()) {
 492             charge_state = CHARGING;
 493             break;
 494         }
 495     /* Fallthrough */
 496     case CHARGER_UNPLUGGED:
 497     case NO_CHARGER:
 498         charge_state = DISCHARGING;
 499         break;
 500     }
 501 }
 502
 503 static inline void charging_algorithm_close(void)
 504 {
 505     /* Nothing to do */
 506 }
 507 #endif /* CONFIG_CHARGING == * */
 508
 509 #if CONFIG_CHARGING
 510 /* Shortcut function calls - compatibility, simplicity. */
 511
 512 /* Returns true if any power input is capable of charging. */
 513 bool charger_inserted(void)
 514 {
 515     return power_thread_inputs & POWER_INPUT_CHARGER;
 516 }
 517
 518 /* Returns true if any power input is connected - charging-capable
 519  * or not. */
 520 bool power_input_present(void)
 521 {
 522     return power_thread_inputs & POWER_INPUT;
 523 }
 524
 525 /*
 526  * Detect charger inserted. Return true if the state is transistional.
 527  */
 528 static inline bool detect_charger(unsigned int pwr)
 529 {
 530     /*
 531      * Detect charger plugged/unplugged transitions.  On a plugged or
 532      * unplugged event, we return immediately, run once through the main
 533      * loop (including the subroutines), and end up back here where we
 534      * transition to the appropriate steady state charger on/off state.
 535      */
 536     if (pwr & POWER_INPUT_CHARGER) {
 537         switch (charger_input_state)
 538         {
 539         case NO_CHARGER:
 540         case CHARGER_UNPLUGGED:
 541             charger_input_state = CHARGER_PLUGGED;
 542             break;
 543
 544         case CHARGER_PLUGGED:
 545             queue_broadcast(SYS_CHARGER_CONNECTED, 0);
 546             last_sent_battery_level = 0;
 547             charger_input_state = CHARGER;
 548             break;
 549
 550         case CHARGER:
 551             /* Steady state */
 552             return false;
 553         }
 554     }
 555     else {    /* charger not inserted */
 556         switch (charger_input_state)
 557         {
 558         case NO_CHARGER:
 559             /* Steady state */
 560             return false;
 561
 562         case CHARGER_UNPLUGGED:
 563             queue_broadcast(SYS_CHARGER_DISCONNECTED, 0);
 564             last_sent_battery_level = 100;
 565             charger_input_state = NO_CHARGER;
 566             break;
 567
 568         case CHARGER_PLUGGED:
 569         case CHARGER:
 570             charger_input_state = CHARGER_UNPLUGGED;
 571             break;
 572         }
 573     }
 574
 575     /* Transitional state */
 576     return true;
 577 }
 578 #endif /* CONFIG_CHARGING */
 579
 580 /*
 581  * Monitor the presence of a charger and perform critical frequent steps
 582  * such as running the battery voltage filter.
 583  */
 584 static inline void power_thread_step(void)
 585 {
 586     /* If the power off timeout expires, the main thread has failed
 587        to shut down the system, and we need to force a power off */
 588     if (shutdown_timeout) {
 589         shutdown_timeout -= POWER_THREAD_STEP_TICKS;
 590
 591         if (shutdown_timeout <= 0)
 592             power_off();
 593     }
 594
 595 #ifdef HAVE_RTC_ALARM
 596     power_thread_rtc_process();
 597 #endif
 598
 599     /*
 600      * Do a digital exponential filter.  We don't sample the battery if
 601      * the disk is spinning unless we are in USB mode (the disk will most
 602      * likely always be spinning in USB mode) or charging.
 603      */
 604     if (!storage_disk_is_active() || usb_inserted()
 605 #if CONFIG_CHARGING >= CHARGING_MONITOR
 606             || charger_input_state == CHARGER
 607 #endif
 608     ) {
 609         avgbat += battery_adc_voltage() - avgbat / BATT_AVE_SAMPLES;
 610         /*
 611          * battery_millivolts is the millivolt-scaled filtered battery value.
 612          */
 613         battery_millivolts = avgbat / BATT_AVE_SAMPLES;
 614
 615         /* update battery status every time an update is available */
 616         battery_status_update();
 617     }
 618     else if (battery_percent < 8) {
 619         /*
 620          * If battery is low, observe voltage during disk activity.
 621          * Shut down if voltage drops below shutoff level and we are not
 622          * using NiMH or Alkaline batteries.
 623          */
 624         battery_millivolts = (battery_adc_voltage() +
 625                               battery_millivolts + 1) / 2;
 626
 627         /* update battery status every time an update is available */
 628         battery_status_update();
 629
 630         if (!shutdown_timeout && query_force_shutdown()) {
 631             sys_poweroff();
 632         }
 633         else {
 634             avgbat += battery_millivolts - avgbat / BATT_AVE_SAMPLES;
 635         }
 636     }
 637 } /* power_thread_step */
 638
 639 static void power_thread(void)
 640 {
 641     long next_power_hist;
 642
 643     /* Delay reading the first battery level */
 644 #ifdef MROBE_100
 645     while (battery_adc_voltage() > 4200) /* gives false readings initially */
 646 #endif
 647     {
 648         sleep(HZ/100);
 649     }
 650
 651 #if CONFIG_CHARGING
 652     /* Initialize power input status before calling other routines. */
 653     power_thread_inputs = power_input_status();
 654 #endif
 655
 656     /* initialize the voltages for the exponential filter */
 657     avgbat = battery_adc_voltage() + 15;
 658
 659 #ifdef HAVE_DISK_STORAGE /* this adjustment is only needed for HD based */
 660     /* The battery voltage is usually a little lower directly after
 661        turning on, because the disk was used heavily. Raise it by 5% */
 662 #if CONFIG_CHARGING
 663     if (!charger_inserted()) /* only if charger not connected */
 664 #endif
 665     {
 666         avgbat += (percent_to_volt_discharge[battery_type][6] -
 667                    percent_to_volt_discharge[battery_type][5]) / 2;
 668     }
 669 #endif /* HAVE_DISK_STORAGE */
 670
 671     avgbat = avgbat * BATT_AVE_SAMPLES;
 672     battery_millivolts = avgbat / BATT_AVE_SAMPLES;
 673     power_history[0] = battery_millivolts;
 674
 675 #if CONFIG_CHARGING
 676     if (charger_inserted()) {
 677         battery_percent = voltage_to_percent(battery_millivolts,
 678                             percent_to_volt_charge);
 679     }
 680     else
 681 #endif
 682     {
 683         battery_percent = voltage_to_percent(battery_millivolts,
 684                             percent_to_volt_discharge[battery_type]);
 685         battery_percent += battery_percent < 100;
 686     }
 687
 688     powermgmt_init_target();
 689
 690     next_power_hist = current_tick + HZ*60;
 691
 692     while (1)
 693     {
 694 #if CONFIG_CHARGING
 695         unsigned int pwr = power_input_status();
 696 #ifdef HAVE_BATTERY_SWITCH
 697         if ((pwr ^ power_thread_inputs) & POWER_INPUT_BATTERY) {
 698             sleep(HZ/10);
 699             reset_battery_filter(battery_adc_voltage());
 700         }
 701 #endif
 702         power_thread_inputs = pwr;
 703
 704         if (!detect_charger(pwr))
 705 #endif /* CONFIG_CHARGING */
 706         {
 707             /* Steady state */
 708             sleep(POWER_THREAD_STEP_TICKS);
 709
 710             /* Do common power tasks */
 711             power_thread_step();
 712         }
 713
 714         /* Perform target tasks */
 715         charging_algorithm_step();
 716
 717         if (TIME_BEFORE(current_tick, next_power_hist))
 718             continue;
 719
 720         /* increment to ensure there is a record for every minute
 721          * rather than go forward from the current tick */
 722         next_power_hist += HZ*60;
 723
 724         /* rotate the power history */
 725         memmove(&power_history[1], &power_history[0],
 726                 sizeof(power_history) - sizeof(power_history[0]));
 727
 728         /* insert new value at the start, in millivolts 8-) */
 729         power_history[0] = battery_millivolts;
 730
 731         handle_auto_poweroff();
 732     }
 733 } /* power_thread */
 734
 735 void powermgmt_init(void)
 736 {
 737     create_thread(power_thread, power_stack, sizeof(power_stack), 0,
 738                   power_thread_name IF_PRIO(, PRIORITY_SYSTEM)
 739                   IF_COP(, CPU));
 740 }
 741
 742 /* Various hardware housekeeping tasks relating to shutting down the player */
 743 void shutdown_hw(void)
 744 {
 745     charging_algorithm_close();
 746     audio_stop();
 747
 748     if (battery_level_safe()) { /* do not save on critical battery */
 749 #ifdef HAVE_LCD_BITMAP
 750       glyph_cache_save(NULL);
 751 #endif
 752
 753 /* Commit pending writes if needed. Even though we don't do write caching,
 754    things like flash translation layers may need this to commit scattered
 755    pages to there final locations. So far only used for iPod Nano 2G. */
 756 #ifdef HAVE_STORAGE_FLUSH
 757         storage_flush();
 758 #endif
 759
 760         if (storage_disk_is_active())
 761             storage_spindown(1);
 762     }
 763
 764     while (storage_disk_is_active())
 765         sleep(HZ/10);
 766
 767 #if CONFIG_CODEC == SWCODEC
 768     audiohw_close();
 769 #else
 770     mp3_shutdown();
 771 #endif
 772
 773     /* If HD is still active we try to wait for spindown, otherwise the
 774        shutdown_timeout in power_thread_step will force a power off */
 775     while (storage_disk_is_active())
 776         sleep(HZ/10);
 777
 778 #ifndef HAVE_LCD_COLOR
 779     lcd_set_contrast(0);
 780 #endif
 781 #ifdef HAVE_REMOTE_LCD
 782     lcd_remote_set_contrast(0);
 783 #endif
 784 #ifdef HAVE_LCD_SHUTDOWN
 785     lcd_shutdown();
 786 #endif
 787
 788     /* Small delay to make sure all HW gets time to flush. Especially
 789        eeprom chips are quite slow and might be still writing the last
 790        byte. */
 791     sleep(HZ/4);
 792     power_off();
 793 }
 794
 795 void sys_poweroff(void)
 796 {
 797 #ifndef BOOTLOADER
 798     logf("sys_poweroff()");
 799     /* If the main thread fails to shut down the system, we will force a
 800        power off after an 20 second timeout - 28 seconds if recording */
 801     if (shutdown_timeout == 0) {
 802 #if defined(IAUDIO_X5) || defined(IAUDIO_M5) || defined(COWON_D2)
 803         pcf50606_reset_timeout(); /* Reset timer on first attempt only */
 804 #endif
 805 #ifdef HAVE_RECORDING
 806         if (audio_status() & AUDIO_STATUS_RECORD)
 807             shutdown_timeout += HZ*8;
 808 #endif
 809 #ifdef IPOD_NANO2G
 810         /* The FTL alone may take half a minute to shut down cleanly. */
 811         shutdown_timeout += HZ*60;
 812 #else
 813         shutdown_timeout += HZ*20;
 814 #endif
 815     }
 816
 817     queue_broadcast(SYS_POWEROFF, 0);
 818 #endif /* BOOTLOADER */
 819 }
 820
 821 void cancel_shutdown(void)
 822 {
 823     logf("cancel_shutdown()");
 824
 825 #if defined(IAUDIO_X5) || defined(IAUDIO_M5) || defined(COWON_D2)
 826     /* TODO: Move some things to target/ tree */
 827     if (shutdown_timeout)
 828         pcf50606_reset_timeout();
 829 #endif
 830
 831     shutdown_timeout = 0;
 832 }
 833 #endif /* SIMULATOR */
 834
 835 /* Send system battery level update events on reaching certain significant
 836    levels. This must be called after battery_percent has been updated. */
 837 void send_battery_level_event(void)
 838 {
 839     static const int levels[] = { 5, 15, 30, 50, 0 };
 840     const int *level = levels;
 841
 842     while (*level)
 843     {
 844         if (battery_percent <= *level && last_sent_battery_level > *level) {
 845             last_sent_battery_level = *level;
 846             queue_broadcast(SYS_BATTERY_UPDATE, last_sent_battery_level);
 847             break;
 848         }
 849
 850         level++;
 851     }
 852 }