firmware/export/config/samsungyh920.h

   1 /*
   2  * This config file is for the Samsung YH-920
   3  */
   4
   5 #define TARGET_TREE /* this target is using the target tree system */
   6
   7 /* For Rolo and boot loader */
   8 #define MODEL_NUMBER 58
   9 #define MODEL_NAME   "Samsung YH-920"
  10
  11 /* define this if you have recording possibility */
  12 /* todo #define HAVE_RECORDING */
  13
  14 /* Define bitmask of input sources - recordable bitmask can be defined
  15    explicitly if different */
  16 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN )
  17
  18 /* define the bitmask of hardware sample rates */
  19 #define HW_SAMPR_CAPS   (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
  20                          SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
  21                          SAMPR_CAP_11 | SAMPR_CAP_8)
  22
  23 /* define the bitmask of recording sample rates */
  24 #define REC_SAMPR_CAPS  (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
  25                          SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
  26                          SAMPR_CAP_11 | SAMPR_CAP_8)
  27
  28 /* Type of LCD */
  29 #define CONFIG_LCD LCD_S1D15E06
  30
  31 /* LCD dimensions */
  32 #define LCD_WIDTH  160
  33 #define LCD_HEIGHT 128
  34 #define LCD_DEPTH  2
  35 #define LCD_PIXELFORMAT VERTICAL_PACKING
  36
  37 /* Display colours, for screenshots and sim (0xRRGGBB) */
  38 #define LCD_DARKCOLOR       0x000000
  39 #define LCD_BRIGHTCOLOR     0x5a915a
  40 #define LCD_BL_DARKCOLOR    0x000000
  41 #define LCD_BL_BRIGHTCOLOR  0xadd8e6
  42
  43 /* todo */
  44 /* #ifndef BOOTLOADER */
  45 #if 0
  46 /* Define this if your LCD can be enabled/disabled */
  47 #define HAVE_LCD_ENABLE
  48
  49 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  50  * should be defined as well.
  51  * We can currently put the lcd to sleep but it won't wake up properly */
  52 #define HAVE_LCD_SLEEP
  53 #define HAVE_LCD_SLEEP_SETTING
  54 #endif
  55
  56 /* Define this for LCD backlight available */
  57 #define HAVE_BACKLIGHT
  58
  59 /* Define this if your LCD can set contrast */
  60 /* todo #define HAVE_LCD_CONTRAST */
  61
  62 #define MIN_CONTRAST_SETTING        0
  63 #define MAX_CONTRAST_SETTING        30
  64 #define DEFAULT_CONTRAST_SETTING    14 /* Match boot contrast */
  65
  66 /* define this if you can flip your LCD */
  67 /* todo #define HAVE_LCD_FLIP */
  68
  69 /* define this if you can invert the colours on your LCD */
  70 /* todo #define HAVE_LCD_INVERT */
  71
  72 /* put the lcd frame buffer in IRAM */
  73 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR */
  74
  75 /* define this if you have a bitmap LCD display */
  76 #define HAVE_LCD_BITMAP
  77
  78 /* define this if you want album art for this target */
  79 #define HAVE_ALBUMART
  80
  81 /* define this to enable bitmap scaling */
  82 #define HAVE_BMP_SCALING
  83
  84 /* define this to enable JPEG decoding */
  85 #define HAVE_JPEG
  86
  87 /* define this if you have access to the quickscreen */
  88 #define HAVE_QUICKSCREEN
  89
  90 /* define this if you have access to the pitchscreen */
  91 #define HAVE_PITCHSCREEN
  92
  93 /* define this if you would like tagcache to build on this target */
  94 #define HAVE_TAGCACHE
  95
  96 #define CONFIG_KEYPAD SAMSUNG_YH_PAD
  97
  98 /* Define this if you do software codec */
  99 #define CONFIG_CODEC SWCODEC
 100
 101 /* define this if you have a real-time clock */
 102 #ifndef BOOTLOADER
 103 #define CONFIG_RTC RTC_E8564
 104 /* TODO ??? */
 105 //#define HAVE_RTC_ALARM
 106 #endif
 107
 108 /* define this if you have a disk storage, i.e. something
 109    that needs spinups and can cause skips when shaked */
 110 #define HAVE_DISK_STORAGE
 111
 112 /* define this if you use an ATA controller */
 113 #define CONFIG_STORAGE STORAGE_ATA
 114
 115 /*define this if the ATA controller and method of USB access support LBA48 */
 116 #define HAVE_LBA48
 117
 118 /* We're able to shut off power to the HDD */
 119 /* todo #define HAVE_ATA_POWER_OFF */
 120
 121 /* Define this if you have a software controlled poweroff */
 122 #define HAVE_SW_POWEROFF
 123
 124 /* The number of bytes reserved for loadable codecs */
 125 #define CODEC_SIZE 0x100000
 126
 127 /* The number of bytes reserved for loadable plugins */
 128 #define PLUGIN_BUFFER_SIZE 0x80000
 129
 130 /* Define this if you have the AK4537 audio codec */
 131 #define HAVE_AK4537
 132
 133 /* AK4537 has no tone controls, so we use the software ones */
 134 #define HAVE_SW_TONE_CONTROLS
 135
 136 #define AB_REPEAT_ENABLE 1
 137
 138 #define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity */
 139 #define BATTERY_CAPACITY_MIN 1500  /* min. capacity selectable */
 140 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
 141 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 142 #define BATTERY_TYPES_COUNT  1    /* only one type */
 143
 144 /* Hardware controlled charging */
 145 #define CONFIG_CHARGING CHARGING_SIMPLE
 146
 147 /* define this if the unit can be powered or charged via USB */
 148 #define HAVE_USB_POWER
 149
 150 /* Define this if you have a PortalPlayer PP5020 */
 151 #define CONFIG_CPU PP5020
 152
 153 /* Define this if you want to use the PP5020 i2c interface */
 154 #define CONFIG_I2C I2C_PP5020
 155
 156 /* define this if the hardware can be powered off while charging */
 157 #define HAVE_POWEROFF_WHILE_CHARGING
 158
 159 /* The start address index for ROM builds */
 160 #define ROM_START 0x00000000
 161
 162 /* The size of the flash ROM */
 163 #define FLASH_SIZE 0x100000
 164
 165 /* Define this to the CPU frequency */
 166 #define CPU_FREQ      75000000
 167
 168 /* USB On-the-go */
 169 #define CONFIG_USBOTG USBOTG_ARC
 170
 171 /* enable these for the experimental usb stack */
 172 #define HAVE_USBSTACK
 173 #define USE_ROCKBOX_USB
 174 #define USB_VENDOR_ID   0x04e8
 175 #define USB_PRODUCT_ID  0x5022
 176
 177 /* Define this if you have adjustable CPU frequency */
 178 #define HAVE_ADJUSTABLE_CPU_FREQ
 179
 180 #define MI4_FORMAT
 181 #define BOOTFILE_EXT    "mi4"
 182 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 183 #define BOOTDIR "/.rockbox"
 184
 185 /* Offset ( in the firmware file's header ) to the file CRC */
 186 #define FIRMWARE_OFFSET_FILE_CRC    0x00
 187
 188 /* Offset ( in the firmware file's header ) to the real data */
 189 #define FIRMWARE_OFFSET_FILE_DATA   0x00
 190
 191 #define ICODE_ATTR_TREMOR_NOT_MDCT
 192
 193
 194 /* DMA is used only for reading on PP502x because although reads are ~8x faster
 195  * writes appear to be ~25% slower.
 196  */
 197 #define HAVE_ATA_DMA
 198
 199 /* Define this if a programmable hotkey is mapped */
 200 #define HAVE_HOTKEY