firmware/export/config/ipodcolor.h

   1 /*
   2  * This config file is for the Apple iPod Color/Photo
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 #define MODEL_NAME   "Apple iPod Color/Photo"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 3
  12
  13 /* define this if you use an ATA controller */
  14 #define CONFIG_STORAGE STORAGE_ATA
  15
  16 /*define this if the ATA controller and method of USB access support LBA48 */
  17 #define HAVE_LBA48
  18
  19 /* define this if you have recording possibility */
  20 #define HAVE_RECORDING
  21
  22 /* Define bitmask of input sources - recordable bitmask can be defined
  23    explicitly if different */
  24 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
  25
  26 /* define the bitmask of hardware sample rates */
  27 #define HW_SAMPR_CAPS   (SAMPR_CAP_44)
  28
  29 /* define the bitmask of recording sample rates */
  30 #define REC_SAMPR_CAPS  (SAMPR_CAP_44)
  31
  32 /* define this if you have a bitmap LCD display */
  33 #define HAVE_LCD_BITMAP
  34
  35 /* define this if you have a colour LCD */
  36 #define HAVE_LCD_COLOR
  37
  38 /* define this if you want album art for this target */
  39 #define HAVE_ALBUMART
  40
  41 /* define this to enable bitmap scaling */
  42 #define HAVE_BMP_SCALING
  43
  44 /* define this to enable JPEG decoding */
  45 #define HAVE_JPEG
  46
  47 /* define this if you have access to the quickscreen */
  48 #define HAVE_QUICKSCREEN
  49 /* define this if you have access to the pitchscreen */
  50 #define HAVE_PITCHSCREEN
  51
  52 /* define this if you would like tagcache to build on this target */
  53 #define HAVE_TAGCACHE
  54
  55 /* LCD dimensions */
  56 #define LCD_WIDTH  220
  57 #define LCD_HEIGHT 176
  58 #define LCD_DEPTH  16   /* 65536 colours */
  59 #define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */
  60
  61 /* LCD stays visible without backlight - simulator hint */
  62 #define HAVE_TRANSFLECTIVE_LCD
  63
  64 #define CONFIG_KEYPAD IPOD_4G_PAD
  65
  66 /* Define this to enable morse code input */
  67 #define HAVE_MORSE_INPUT
  68
  69 /* Define this if you do software codec */
  70 #define CONFIG_CODEC SWCODEC
  71
  72 /* define this if you have a real-time clock */
  73 #define CONFIG_RTC RTC_PCF50605
  74
  75 /* Define if the device can wake from an RTC alarm */
  76 #define HAVE_RTC_ALARM
  77
  78 /* Define this if you can switch on/off the accessory power supply */
  79 #define HAVE_ACCESSORY_SUPPLY
  80
  81 /* Define this if you have a software controlled poweroff */
  82 #define HAVE_SW_POWEROFF
  83
  84 /* The number of bytes reserved for loadable codecs */
  85 #define CODEC_SIZE 0x100000
  86
  87 /* The number of bytes reserved for loadable plugins */
  88 #define PLUGIN_BUFFER_SIZE 0x80000
  89
  90 /* Define this if you have the WM8975 audio codec */
  91 #define HAVE_WM8975
  92
  93 #define AB_REPEAT_ENABLE 1
  94 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
  95
  96 /* define this if you have a disk storage, i.e. something
  97    that needs spinups and can cause skips when shaked */
  98 #define HAVE_DISK_STORAGE
  99
 100 /* Define this for LCD backlight available */
 101 #define HAVE_BACKLIGHT
 102
 103 /* define this if the unit uses a scrollwheel for navigation */
 104 #define HAVE_SCROLLWHEEL
 105 /* define to activate advanced wheel acceleration code */
 106 #define HAVE_WHEEL_ACCELERATION
 107 /* define from which rotation speed [degree/sec] on the acceleration starts */
 108 #define WHEEL_ACCEL_START 270
 109 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 110 #define WHEEL_ACCELERATION 3
 111
 112 /* Define this if you can detect headphones */
 113 #define HAVE_HEADPHONE_DETECTION
 114
 115 #define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity */
 116 #define BATTERY_CAPACITY_MIN 700  /* min. capacity selectable */
 117 #define BATTERY_CAPACITY_MAX 1200 /* max. capacity selectable */
 118 #define BATTERY_CAPACITY_INC 10   /* capacity increment */
 119 #define BATTERY_TYPES_COUNT  1    /* only one type */
 120
 121 /* Hardware controlled charging? */
 122 #define CONFIG_CHARGING CHARGING_MONITOR
 123
 124 /* define this if the unit can be powered or charged via USB */
 125 #define HAVE_USB_POWER
 126
 127 /* define current usage levels */
 128 #define CURRENT_NORMAL     69  /* ~10h (700mAh), see FS#9072 */
 129 #define CURRENT_BACKLIGHT  20  /* FIXME: this needs adjusting */
 130 #if defined(HAVE_RECORDING)
 131 #define CURRENT_RECORD     35  /* FIXME: this needs adjusting */
 132 #endif
 133
 134 /* Define Apple remote tuner */
 135 #define CONFIG_TUNER IPOD_REMOTE_TUNER
 136 #define HAVE_RDS_CAP
 137
 138 /* Define this if you have a PortalPlayer PP5020 */
 139 #define CONFIG_CPU PP5020
 140
 141 /* Define this if you want to use the PP5020 i2c interface */
 142 #define CONFIG_I2C I2C_PP5020
 143
 144 /* We're able to shut off power to the HDD */
 145 #define HAVE_ATA_POWER_OFF
 146
 147 /* define this if the hardware can be powered off while charging */
 148 //#define HAVE_POWEROFF_WHILE_CHARGING
 149
 150 /* The start address index for ROM builds */
 151 #define ROM_START 0x00000000
 152
 153 /* The size of the flash ROM */
 154 #define FLASH_SIZE 0x100000
 155
 156 /* Define this to the CPU frequency */
 157 #define CPU_FREQ      11289600
 158
 159 #define CONFIG_LCD LCD_IPODCOLOR
 160
 161 /* Offset ( in the firmware file's header ) to the file length */
 162 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 163
 164 /* Offset ( in the firmware file's header ) to the file CRC */
 165 #define FIRMWARE_OFFSET_FILE_CRC 0
 166
 167 /* Offset ( in the firmware file's header ) to the real data */
 168 #define FIRMWARE_OFFSET_FILE_DATA 8
 169
 170 /* USB On-the-go */
 171 #define CONFIG_USBOTG USBOTG_ARC
 172
 173 /* enable these for the experimental usb stack */
 174 #define HAVE_USBSTACK
 175 #define USE_ROCKBOX_USB
 176 #define USB_VENDOR_ID 0x05ac
 177 #define USB_PRODUCT_ID 0x1204
 178 #define HAVE_USB_HID_MOUSE
 179
 180 /* Define this if you have adjustable CPU frequency */
 181 #define HAVE_ADJUSTABLE_CPU_FREQ
 182
 183 /* Define this if you can read an absolute wheel position */
 184 #define HAVE_WHEEL_POSITION
 185
 186 #define BOOTFILE_EXT "ipod"
 187 #define BOOTFILE "rockbox." BOOTFILE_EXT
 188 #define BOOTDIR "/.rockbox"
 189
 190 #define ICODE_ATTR_TREMOR_NOT_MDCT
 191
 192 #define IPOD_ACCESSORY_PROTOCOL
 193 #define HAVE_SERIAL
 194
 195
 196 /* DMA is used only for reading on PP502x because although reads are ~8x faster
 197  * writes appear to be ~25% slower.
 198  */
 199 #define HAVE_ATA_DMA
 200
 201 /* Define this if a programmable hotkey is mapped */
 202 #define HAVE_HOTKEY